Develop Bugs

[TWEAKS][ICS] ICS/CM9 performance tweaks! [UPDATED]

************************************************
IF THE LINES ARE NOT ALREADY IN BUILD.PROP, JUST ADD THEM TO THE END OF THE FILE
************************************************
So i found these in the net.
I have applied them in latest Fuzz's build and it is very smooth!!
Here are just a couple of tweaks to smoothen one's UI experience in Android 4.0 Ice Cream Sandwich. (Remember these changes won't apply without a reboot and you will need a rooted device).
Improve UI frame rate and touch response:
Code:
windowsmgr.max_events_per_sec=240
Disable kernel error logging:
Code:
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
Get rid of CPU rendering:
1. Navigate to /system/lib/egl/
2. Open the file named "egl.cfg"
3. Delete the first line. It should say "0 0 android" or something similar
4. Go back into the egl folder and delete libGLES_android.so
What this does is remove the entire soft-rendering pathway from the OS.
Enable tile rendering:
Tile rendering is a more efficient form of GPU composition, and boosts performance since each frame is split into tiles.
Code:
debug.enabletr=true
Improve Scrolling FPS:
Code:
ro.max.fling_velocity=6000
Signal Tweaks:
Code:
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
Network Speed tweaks:
Code:
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
Disable bootanimation for faster boot:
Code:
debug.sf.nobootanimation=1

i have only read permission bt not write...what should i do in this case
and d commands u said are not there in build.prop
i m using cm9 kangs by fuzz

you should use root file browser, e.g Root Explorer, and press mount as r/w on the top right corner.
then long press on build.prop file and select open in text editor
then add the lines to build.prop file, save and reboot

Solid explorer is another root explorer that's free and has an inbuilt text editor
Sent from my MB525

@OP, what were the specific values you used for scrolling fps and UI frame rate on your device

I found another thread on xda a stock/beta thread dealing with xperia and there were a few more tweaks.will post the link when I get to my PC.however that one had the values for deep sleepand performance.so far I am enjoying it.very fast and snappy.no boot loops nothing:thumbup:
Sent from my MB526 using xda premium

hsrars-d said:
you should use root file browser, e.g Root Explorer, and press mount as r/w on the top right corner.
then long press on build.prop file and select open in text editor
then add the lines to build.prop file, save and reboot
Click to expand...
Click to collapse
I just copied the file using drop box edited it on my PC and again synced it with my phone.just used ROM toolbox pro to set permissions
Sent from my MB526 using xda premium

syllogyking said:
@OP, what were the specific values you used for scrolling fps and UI frame rate on your device
Click to expand...
Click to collapse
windowsmgr.max_events_per_sec=240
ro.max.fling_velocity=6000
Sent from my MB525 using xda premium

http://androidforums.com/triumph-all-things-root/495620-build-prop-performance-tweaks-updated-04-14-2012-a.html
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/474-list-some-build-prop-tweaks.html#post8158

Cleaned OP and added some more stuff

Not working
Tried adding to end of prop file but no effect. Should i leave a space after the last entry i.e.
**********(last entry)
winowdsmgr_****
or
**********(last entry)
windowsmgr_****
obviously what a typed above is a quick example not what I typed into build prop.
Thanks.

Tile rendering makes all my launchers crash even Trebuchet. The only option then left is to restore.

GigahurtzUK said:
Tried adding to end of prop file but no effect. Should i leave a space after the last entry i.e.
**********(last entry)
winowdsmgr_****
or
**********(last entry)
windowsmgr_****
obviously what a typed above is a quick example not what I typed into build prop.
Thanks.
Click to expand...
Click to collapse
I added it with no space, above the line that reads #end of build.prop
like this :
some_line
added_line
# end build properties
And you may not feel any difference, latest build is just fine without these tweaks, just added them before HWA builds came out

these are the ones i put in build.prop, and the phone feels smoother and more responsive now.
Code:
windowsmgr.max_events_per_sec=240
debug.enabletr=true
ro.min.fling_velocity=8000
ro.max.fling_velocity=12000
persist.sys.ui.hw=1
ro.media.enc.jpeg.quality=90
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
persist.sys.purgeable_assets=1
video.accelerate.hw=1
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
ro.HOME_APP_ADJ=1
#modified lines:
#dalvik.vm.dexopt-flags=m=v,o=y
#ro.telephony.call_ring.delay=0
#hwui.whitelist=0
#hwui.blacklist=
#wifi.supplicant_scan_interval=120
sent from my cm9 defy...

Disabling the boot animation didn't work for me :/
I'm using a custom boot animation located in
/system/media/bootanimation.zip
My build.prop has it as my last entry:
http://pastebin.com/raw.php?i=EsLRbFNn

How can i use the Linaro tweaks?

Bleak3993 said:
How can i use the Linaro tweaks?
Click to expand...
Click to collapse
I'm wondering the same
btw, the bootanimation trick didn't work for me!

hsrars-d said:
************************************************
IF THE LINES ARE NOT ALREADY IN BUILD.PROP, JUST ADD THEM TO THE END OF THE FILE
************************************************
So i found these in the net.
I have applied them in latest Fuzz's build and it is very smooth!!
Here are just a couple of tweaks to smoothen one's UI experience in Android 4.0 Ice Cream Sandwich. (Remember these changes won't apply without a reboot and you will need a rooted device).
Improve UI frame rate and touch response:
Code:
windowsmgr.max_events_per_sec=240
Disable kernel error logging:
Code:
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
Get rid of CPU rendering:
1. Navigate to /system/lib/egl/
2. Open the file named "egl.cfg"
3. Delete the first line. It should say "0 0 android" or something similar
4. Go back into the egl folder and delete libGLES_android.so
What this does is remove the entire soft-rendering pathway from the OS.
Enable tile rendering:
Tile rendering is a more efficient form of GPU composition, and boosts performance since each frame is split into tiles.
Code:
debug.enabletr=true
Improve Scrolling FPS:
Code:
ro.max.fling_velocity=6000
Signal Tweaks:
Code:
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
Network Speed tweaks:
Code:
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
Disable bootanimation for faster boot:
Code:
debug.sf.nobootanimation=1
Click to expand...
Click to collapse
Using above fixes I get an error unfortunately trebuchet has stopped and can't operate my phone.
any ideas?

(q)speed up my phone?

Hello
how can i speed my r800i
im on stock 2.3.4 baseband 66 not unlocked, but rooted :d
so is ther aby tweaks or programs to make my phone faster?

EdvinuxxxS said:
Hello
how can i speed my r800i
im on stock 2.3.4 baseband 66 not unlocked, but rooted :d
so is ther aby tweaks or programs to make my phone faster?
Click to expand...
Click to collapse
You could overclock it, using an app like SetCPU (Free here: http://forum.xda-developers.com/showthread.php?t=505419) or SetXperia (Free on google play)

Niko of Death said:
You could overclock it, using an app like SetCPU (Free here: http://forum.xda-developers.com/showthread.php?t=505419) or SetXperia (Free on google play)
Click to expand...
Click to collapse
How do you actually overclock within SetXperia? Can't find that voltage menu tutorials seem to point to. Googled for like 10 minutes, sorry for stupidity..

EdvinuxxxS said:
Hello
how can i speed my r800i
im on stock 2.3.4 baseband 66 not unlocked, but rooted :d
so is ther aby tweaks or programs to make my phone faster?
Click to expand...
Click to collapse
Hey, if ur on stock based, i recommend deleteing any custom mods/tweaks u installed, and trying our some of these, heres some build.prop tweaks:
Code:
# Adreno Optimizations
hw3d.force=1
com.qc.hardware=1
persist.sys.ui.hw=1
video.accelerate.hw=1
hwui.disable.vsync=true
ro.config.disable.hw_accel=false
windowsmgr.max_events_per_sec=90
# BLX
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
# Kernel Checks
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
persist.android.strictmode=0
# ADB Notif Off
persist.adb.notify=0
# Hardware Debuging
debug.sf.hw=1
debug.egl.hw=1
debug.egl.profiler=1
debug.qc.hardware=true
debug.composition.type=gpu
debug.performance.tuning=1
debug.gr.numframebuffers=3
# Purging Access
persist.sys.purgeable_assets=1
# NLN
ENFORCE_PROCESS_LIMIT=false
MAX_SERVICE_INACTIVITY=false
MIN_HIDDEN_APPS=false
MAX_HIDDEN_APPS=false
CONTENT_APP_IDLE_OFFSET=false
EMPTY_APP_IDLE_OFFSET=false
MAX_ACTIVITIES=false
ACTIVITY_INACTIVE_RESET_TIME=false
MAX_RECENT_TASKS=false
MIN_RECENT_TASKS=false
APP_SWITCH_DELAY_TIME=false
MAX_PROCESSES=false
PROC_START_TIMEOUT=false
CPU_MIN_CHECK_DURATION=false
GC_TIMEOUT=false
SERVICE_TIMEOUT=false
MIN_CRASH_INTERVAL=false
# MEM
ro.FOREGROUND_APP_MEM=2048
ro.VISIBLE_APP_MEM=3072
ro.PERCEPTIBLE_APP_MEM=1024
ro.HEAVY_WEIGHT_APP_MEM=4096
ro.SECONDARY_SERVER_MEM=4096
ro.BACKUP_APP_MEM=6144
ro.HOME_APP_MEM=1024
ro.HIDDEN_APP_MEM=6144
ro.EMPTY_APP_MEM=8192
# ADJ
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=3
ro.PERCEPTIBLE_APP_ADJ=2
ro.HEAVY_WEIGHT_APP_ADJ=4
ro.SECONDARY_SERVER_ADJ=6
ro.BACKUP_APP_ADJ=7
ro.HOME_APP_ADJ=1
ro.HIDDEN_APP_MIN_ADJ=9
ro.EMPTY_APP_ADJ=15
copy it to ur build.prop, reboot and done!, u should notice a drastic improvement if this is ur only mod u have and etc... also try this:
http://forum.xda-developers.com/showthread.php?t=2295010

Pizza_Dox said:
Hey, if ur on stock based, i recommend deleteing any custom mods/tweaks u installed, and trying our some of these, heres some build.prop tweaks:
Code:
# Adreno Optimizations
hw3d.force=1
com.qc.hardware=1
persist.sys.ui.hw=1
video.accelerate.hw=1
hwui.disable.vsync=true
ro.config.disable.hw_accel=false
windowsmgr.max_events_per_sec=90
# BLX
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
# Kernel Checks
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
persist.android.strictmode=0
# ADB Notif Off
persist.adb.notify=0
# Hardware Debuging
debug.sf.hw=1
debug.egl.hw=1
debug.egl.profiler=1
debug.qc.hardware=true
debug.composition.type=gpu
debug.performance.tuning=1
debug.gr.numframebuffers=3
# Purging Access
persist.sys.purgeable_assets=1
# NLN
ENFORCE_PROCESS_LIMIT=false
MAX_SERVICE_INACTIVITY=false
MIN_HIDDEN_APPS=false
MAX_HIDDEN_APPS=false
CONTENT_APP_IDLE_OFFSET=false
EMPTY_APP_IDLE_OFFSET=false
MAX_ACTIVITIES=false
ACTIVITY_INACTIVE_RESET_TIME=false
MAX_RECENT_TASKS=false
MIN_RECENT_TASKS=false
APP_SWITCH_DELAY_TIME=false
MAX_PROCESSES=false
PROC_START_TIMEOUT=false
CPU_MIN_CHECK_DURATION=false
GC_TIMEOUT=false
SERVICE_TIMEOUT=false
MIN_CRASH_INTERVAL=false
# MEM
ro.FOREGROUND_APP_MEM=2048
ro.VISIBLE_APP_MEM=3072
ro.PERCEPTIBLE_APP_MEM=1024
ro.HEAVY_WEIGHT_APP_MEM=4096
ro.SECONDARY_SERVER_MEM=4096
ro.BACKUP_APP_MEM=6144
ro.HOME_APP_MEM=1024
ro.HIDDEN_APP_MEM=6144
ro.EMPTY_APP_MEM=8192
# ADJ
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=3
ro.PERCEPTIBLE_APP_ADJ=2
ro.HEAVY_WEIGHT_APP_ADJ=4
ro.SECONDARY_SERVER_ADJ=6
ro.BACKUP_APP_ADJ=7
ro.HOME_APP_ADJ=1
ro.HIDDEN_APP_MIN_ADJ=9
ro.EMPTY_APP_ADJ=15
copy it to ur build.prop, reboot and done!, u should notice a drastic improvement if this is ur only mod u have and etc... also try this:
http://forum.xda-developers.com/showthread.php?t=2295010
Click to expand...
Click to collapse
okay i don this buld.prop tweak. so how to know is it working ?

EdvinuxxxS said:
okay i don this buld.prop tweak. so how to know is it working ?
Click to expand...
Click to collapse
well try play some games, it should feel much smoother and the phone should feel more smoother + u will obtain longer battery life,

Pizza_Dox said:
Hey, if ur on stock based, i recommend deleteing any custom mods/tweaks u installed, and trying our some of these, heres some build.prop tweaks:
*code snipped*
copy it to ur build.prop, reboot and done!, u should notice a drastic improvement if this is ur only mod u have and etc... also try this:
http://forum.xda-developers.com/showthread.php?t=2295010
Click to expand...
Click to collapse
Will this work even if you have other mods installed, such as AdrenoBooster or Liquid Speed?

RoboticBuddy said:
Will this work even if you have other mods installed, such as AdrenoBooster or Liquid Speed?
Click to expand...
Click to collapse
Adreno Booster, yes it will work with it
Liquid speed, maby, im not sure, i would remove all build.prop tweaks it made first then try these,

LCA44B 5.1.1 Modded Boot

Moto 360 LCA44B 5.1.1 Edited Boot With Some Features​
Added some Build.prop codes to the Default.prop, if developers have another codes suggestions I will add
Default.prop
Code:
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
persist.service.adb.enable=1
ro.allow.mock.location=0
persist.sys.usb.config=usbnet
ro.zygote=zygote32
persist.adb.notify=1
bluetooth.force_pm_timer=2000
persist.sys.media.use-awesome=true
log.tag.AmbientService=DEBUG
dalvik.vm.dex2oat-Xms=64m
dalvik.vm.dex2oat-Xmx=512m
dalvik.vm.image-dex2oat-Xms=64m
dalvik.vm.image-dex2oat-Xmx=64m
ro.dalvik.vm.native.bridge=0
#Test to get Adb Permisssions & Root
ro.secure=0
ro.adb.secure=0
ro.debuggable=1
#No Screen When Charging !Work!
ro.ambient.enable_when_plugged=false
ro.ambient.force_when_docked=false
#Test Battery Save
ro.ril.disable.power.collapse=1
ro.kernel.android.checkjni=0
ro.ril.power_collapse=1
ro.mot.eri.losalert.delay=1000
ro.ril.disable.power.collapse=0
power_supply.wakeup=enable
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
debug.performance.tuning=1
debug.composition.type=hw
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
#test 20mhz screen off
pm.sleep_mode=3
#test wifi interval
wifi.supplicant_scan_interval=180
#Test Cpu undercklock to 600Mhz
hw.cpu.throttle.state=1
#Disables logcat
logcat.live=disable
#desplay build
ro.build.display.id=XDA
#test Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
ro.ril.enable.a52=1
ro.ril.enable.a53=0
Also Tried to Add SU to Boot.img with (init.rc & /sbin folder) but not getting it work, need Help Here
init.rc
Code:
service console /system/bin/sh (#tried to get Root in Shell)
class core
console
disabled
user root
group root
Code:
service flash_recovery /sbin/rootme.sh (# files there)
class core
user root
oneshot
I Extracted/compressed boot.img from the latest LCA44B version with CarlivImageKitchen tool, if someone want to try.
Need to Have the latest version LCA44B 5.1.1
You need to connect your moto with DIY USB Interface (its not that easy)
Boot to bootloader ( adb reboot bootloader ) -> unlock it if locked ( fastboot oem unlock )
Then Flash The boot.img ( fastboot flash boot boot.img ) -> ( fastboot reboot )
XDA:DevDB Information
Modded Boot.img With Features, Kernel for the Moto 360
Contributors
Shapi300
Kernel Special Features: Screen Off When Charging, Battery Saving
Version Information
Status: Stable
Created 2016-02-07
Last Updated 2016-02-07

I have a 360 on LCA44B with a working USB cable to test with. PM me the boot.img file.

thanks!!!
i can add these lines in my moto 360 rooted? i think yes, no?
PS.: sorry for my english

Shapi300 said:
Moto 360 LCA44B 5.1.1 Edited Boot With Some Features​
fffffffffffffffffffffffffffffffff
Created 2016-02-07
Last Updated 2016-02-07
Click to expand...
Click to collapse
can you create a boot.img of android 6.0.1 ???
thanks man

Shapi300 said:
Moto 360 LCA44B 5.1.1 Edited Boot With Some Features​
Added some Build.prop codes to the Default.prop, if developers have another codes suggestions I will add
Status: Stable
Created 2016-02-07
Last Updated 2016-02-07
Click to expand...
Click to collapse
can u gift me boot.img
pls

[TWEAKS][Guide] 'build.prop' Tweaks

Most of these are BS, use if you want placebo. I don't support these anymore.
If you don't want to flash zips that makes your phone faster, or you just want to do it yourself, you should try this.
Intro:
As you know Android is open source and the development of Android is increased in today’s life. Android operating system is having some of the information which is really important . Now, whenever a user wants to do editing in the Android system, they do changes in build prop. Build prop tweaks are something which helps you to do changes in the system and customize your android.
If you are having any rooted Android device, this tweak will work absolutely fine. Every user can do editing. But while editing you have to make sure that you do it properly or else it will lead to a bricked Android device. You can easily increase the bootup time of your Android. Increase sound and much more.
Here are the working build.prop tweaks for our device:
Code:
#Better RAM management
ro.HOME_APP_ADJ=1
#Improved audio and video recording quality (works perfect on XL but still works good on X)
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.media.panorama.defres=3264×1840
ro.media.panorama.frameres=1280×720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
#Faster Streaming videos
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
media.stagefright.enable-record=false
#GPU rendering (works better if you have NULL Kernel
debug.sf.hw=1
debug.performance.tuning=1
video.accelerate.hw=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing
#Disables built in error reporting
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
#Better net speed
net.tcp.buffersize.default=4096,87380,256960, 4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,409 6,163 84,256960
net.tcp.buffersize.umts=4096,8 7380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,8 7380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,8 7380,256960,4096,163 84,256960
#Saves batery
ro.ril.power_collapse=1
pm.sleep_mode=1
wifi.supplicant_scan_interval=180
#3G tweaks
ro.ril.hep=0
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
#Better scrolling
windowsmgr.max_events_per_sec=90 #Depends on your preference
ro.min_pointer_dur=8 ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
#Better signal
persist.cust.tel.eons=1
#Faster boot
ro.config.hw_quickpoweron=true
#Disables error checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
#Battery life
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
#Performance
debug.performance.tuning=1
Code:
#Optional
#Disables the bootanimation
debug.sf.nobootanimation=1
That's it and thanks to ALL THE DEVS ON XDA FOR THIS
:fingers-crossed:

HOW TO TWEAK YOUR 'build.prop' :
1) Download and install root explorer on your Android device from above given requirements
2) Open the application and grant the root permissions
3) Now, simply open go to '/system/' and then you will be able to see a build.prop file
4) Now, click on the option called as Mount R/O.
5) Long press on 'build.prop' and you will get a pop-up
6) Just hit open with text editor and then you are good to go
7) Copy the code given above of your choice and simply paste on your build.prop
8) Click on the save changes and then reboot your Android device.
9) To double check, you must set the permissions of build.prop to rw-r-r, so that you will not encounter some kind of error.

thanks, i was looking for this for a long time

flashed the veez tweaks zip. does I need to add these build prop tweaks or already included in the zip

pyumredkar said:
flashed the veez tweaks zip. does I need to add these build prop tweaks or already included in the zip
Click to expand...
Click to collapse
its quite optional, it's up to you:good:

Works on nougat??

vjendra said:
Works on nougat??
Click to expand...
Click to collapse
not all, but some of them

Speed Booster [Magisk_Module] & Tweaks

#Speed Booster All Devices v7 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- DNS 1.1.1.1,1.0.0.1
- Power Saving
- GPU Performance
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Daisy v7.1 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- DNS 1.1.1.1,1.0.0.1
- Power Saving
- GPU Performance
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Fast Charging (VENDOR STOCK)
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic All Devices v7.2 [Magisk Module]
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic Daisy v7.3 [Magisk Module]
- Good touch screen response
- Better response and speed
- Fast Charging (VENDOR STOCK)
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
[OUTHERS]
#Speed Booster All Devices v7.0.1 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- Power Saving
- GPU Performance
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster All Devices v7.0.2 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- Power Saving
- GPU Performance
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Daisy v7.1.1 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- Power Saving
- GPU Performance
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Fast Charging (VENDOR STOCK)
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Daisy v7.1.2 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- Power Saving
- GPU Performance
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Fast Charging (VENDOR STOCK)
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic All Devices v7.2.1 [Magisk Module]
- Better response and speed
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic Daisy v7.3.1 [Magisk Module]
- Better response and speed
- Fast Charging (VENDOR STOCK)
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic All Devices v7.4 [Magisk Module]
- Good touch screen response
- Better response and speed
- Power Saving
- vol step
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic All Devices v7.4.1 [Magisk Module]
- Good touch screen response
- Better response and speed
- vol step
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
Note: Do not use the speedbooster daisy magisk module in rom stock. It is recommended only for custom pie (not having custom vendor). Recommended is the "All devices" version.
If you see something wrong please let me know.
If the device does not start, use magisk uninstaller.zip
#Tested on Android 9 Custom and Android 10, Miui, GSI.
Thx pawelik by the FAST CHARGING (VENDOR STOCK PIE) file.
Thx Rom by dns code - [MODULE] CloudflareDNS4Magisk
If there is anyone else to thank let me know.
Magisk Official:
https://github.com/topjohnwu/Magisk/releases
Magisk Ianmacd stable: https://github.com/ianmacd/MagiskBuilds/tree/private?files=1
https://github.com/ianmacd/MagiskBuilds
@ Magiskplus
MAY HAPPEN FROM ENTERING IN BOOTLOOP, I NOT RESPONSIBLE FOR DAMAGE CAUSED OR DATA LOST BY USING THIS ZIP.
Telegram: @ A2liteOfficial

Outhes Tweaks/Fixes:
I recommend using RootExplorer app.
# Allowed packages to use AUX camera vendor/system
vendor.camera.aux.packagelist=com.bsgmod.camera,com.google.android.GoogleCameraWide,com.android.camera,org.codeaurora.snapcam,com.android.camera,com.huaqin.factory,org.lineageos.snap
vendor.camera.aux.packagelist2=com.android.systemui,com.huaqin.cameraautotest,com.huaqin.runtime
camera.aux.packagelist=org.codeaurora.snapcam,com.android.camera,com.qualcomm.qti.qmmi
vendor.camera.aux.packagelist=com.dual.GCam,com.Wide.GCam,com.Tele.GCam,org.codeaurora.snapcam,com.android.camera,com.qualcomm.qti.qmmi,com.longcheertel.cit
# HAL1 apps list or force those apps to use hal1 - lagfix - vendor/system
vendor.camera.hal1.packagelist=com.android.camera,com.whatsapp,com.intsig.camscanner,com.instagram.android,com.facebook.orca,com.skype.raider,com.google.android.talk
camera.hal1.packagelist=com.skype.raider,com.google.android.talk,com.whatsapp, com.viber.voip,com.google.android.talk,com.instagram.android
# Enable Hal3 and Cam2api in build.prop and in vendor/build.prop
persist.camera.HAL3.enabled=1
persist.vendor.camera.HAL3.enabled=1
persist.vendor.camera.stats.test=5
persist.camera.stats.test=5
persist.camera.eis.enabled=1
# fix green cam
persist.camera.CDS=on
# Cam of WhatsApp and insta fix
camera.disable_treble=0
# Fix low volume in voice rec on whatsapp, telegram...
persist.vendor.audio.fluence.voicerec=false
## Camera Tweaks Supports Google Camera" >> /system/build.prop
persist.camera.HAL3.enabled=1 >> /system/build.prop
camera.HAL3.enabled=1 >> /system/build.prop
persist.camera.eis.enable=1 >> /system/build.prop
camera.eis.enable=1 >> /system/build.prop
persist.camera.is_mode=4 >> /system/build.prop
camera.is_mode=4 >> /system/build.prop
persist.camera.disable_zsl_mode=1 >> /system/build.prop
camera.disable_zsl_mode=1 >> /system/build.prop
persist.camera.gyro.android=4 >> /system/build.prop
camera.gyro.android=4 >> /system/build.prop
persist.camera.tof.direct=1 >> /system/build.prop
camera.tof.direct=1 >> /system/build.prop
persist.camera.tnr.preview=1 >> /system/build.prop
camera.tnr.preview=1 >> /system/build.prop
persist.camera.tnr.video=1 >> /system/build.prop
camera.tnr.video=1 >> /system/build.prop
ro.camera.notify_nfc=1 >> /system/build.prop
camera.notify_nfc=1 >> /system/build.prop
# Performance
sys.use_fifo_ui=1
debug.sf.latch_unsignaled=1
# Netflix custom property
ro.netflix.bsp_rev=Q660-13149-1
# bluetooth fix
persist.vendor.btstack.enable.splita2dp=false
persist.vendor.btstack.a2dp_offload_cap=false
# bt fix 2 Add this to vendor build prop
persist.bluetooth.bluetooth_audio_hal.disabled=true
# BT FIX 3 For fixing BT issue. Add this below lines in /vendor/build.prop
persist.vendor.btstack.enable.splita2dp=false
persist.vendor.btstack.a2dp_offload_cap=false
#BT FIX 4
1. Bluetooth audio connection fix
Backup the file /vendor/overlay/BluetoothResCommon.apk
Simply remove /vendor/overlay/BluetoothResCommon.apk by root explorer app
2. aptX HD
Install "Bluetooth stack audio bitrate changer for SBC + aptX & aptX-HD enabler" from Download of Magisk Manager.
3. build.prop
Open /vendor/build.prop and find "persist.vendor.bt.a2dp_offload_cap=sbc-aac" and replace "sbc-aac" to "sbc-aac-aptx-aptXHD" (Add -aptx-aptXHD)
Note: if you don't find the add "persist.vendor.bt.a2dp_offload_cap=sbc-aac-aptx-aptXHD"
add:
persist.bt.a2dp_offload_cap=sbc-aptx-aptxhd
persistent.bt.a2dp_offload_cap=sbc-aptx-aptXHD-aac-ldac
4. Restart device and test
#FIX BT(a2dp) 5:
qcom.bluetooth.soc=smd
outhers:
https://forum.xda-developers.com/pr...de-fix-bluetooth-audio-a2dp-aptx-gsi-t3950938
https://matjaz.it/simple-fix-for-bluetooth-audio-not-working-on-android-10/
https://www.reddit.com/r/oneplus/comments/d02ssd/is_aptxaptx_hd_working_for_anyone_after_the/
https://github.com/xamarin/xamarin-android/issues/3508
https://github.com/PixelExperience-...mmit/977444af69f10fc135d07e19f1e5f1183e73e9ff
##FiX BT 6 - system/buid.prop
#force disable Bluetooth AAC by default
persist.bt.a2dp.aac_disable=true
#system prop for wipower support
ro.bluetooth.emb_wp_mode=false
ro.bluetooth.wipower=false
#system prop for Bluetooth SOC type
vendor.bluetooth.soc=cherokee
ro.bluetooth.library_name=libbluetooth_qti.so
persist.vendor.btstack.enable.splita2dp=true
persist.vendor.btstack.a2dp_offload_cap=sbc-aptx-aptxhd-aac
ro.bluetooth.remote.autoconnect=true
ro.bluetooth.request.master=true
vendor/build.prop:
persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptxhd-aac
ro.bluetooth.a2dp_offload.supported=true
persist.bluetooth.a2dp_offload.disabled=false
persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac
#Fix BT 7:
system prop for Bluetooth SOC type:
vendor.bluetooth.soc=cherokee
ro.bluetooth.library_name=libbluetooth_qti.so
persist.vendor.btstack.enable.splita2dp=false
persist.vendor.btstack.a2dp_offload_cap=false
#system prop for A4WP profile support
ro.bluetooth.a4wp=false
#system prop for wipower support
ro.bluetooth.emb_wp_mode=false
ro.bluetooth.wipower=false
# Navbar fix
persist.navbar_enabled=1
# fix - hide all icon
Write this in Terminal Emulator:
su
settings put secure sysui_rounded_content_padding 0
# insecure adb flag for roms
ro.debuggable=1
ro.secure=0
# Mtp fix
ro.adb.secure=0
persist.adb.notify=1
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
# Fix Call
persist.vendor.audio.fluence.voicecall=true
# Fix dp4 can't add google account or #Optimize for MSM-8996 & MSM8953 system/build.prop vendor/build.prop
ro.sys.fw.dex2oat_thread_count=4
dalvik.vm.boot-dex2oat-threads=8
dalvik.vm.dex2oat-threads=4
dalvik.vm.image-dex2oat-threads=4
dalvik.vm.dex2oat-filter=speed
dalvik.vm.image-dex2oat-filter=speed
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
# Spectrum support:
spectrum.support=1
# https://forum.xda-developers.com/mi-a2-lite/themes/spectrummorpho-xiaomi-devices-t3986071
# Volte FIX
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
#volstep_tweak
ro.config.media_vol_steps=25
ro.config.vc_call_vol_steps=25
# vendor fix message - there's an internal problem.. system/build.prop
ro.treble.enabled=false
#Or update defconfig and vintf
# Fix SafetyNet manually - ctsProfile work by setting this in build.prop
ro.system.build.fingerprint=xiaomi/tissot/tissot_sprout:8.0.0/OPR1.170623.026/8.1.10:user/release-keys
ro.build.description=tissot-user 8.0.0 OPR1.170623.026 8.1.10 release-keys
ro.build.fingerprint=xiaomi/tissot/tissot_sprout:8.0.0/OPR1.170623.026/8.1.10:user/release-keys
#enable wq_power_save, this can save some batterry if the tasks dont have priority
wq_power_save=1
#tweaks
echo "persist.sys.scrollingcache=3"
echo "profiler.force_disable_ulog=1"
echo "logcat.live=disable"
echo "ro.kernel.checkjni=0"
echo "ro.config.nocheckin=1"
echo "wifi.supplicant_scan_interval=300"
echo "pm.sleep_mode=2"
debug.composition.type=c2d
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.performance.tuning=1
debug.qc.hardware=true
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.sf.hw=1
#Support HDR & FHD
sys.display-size= "YOU_RESOLUTION" - Daisy is 2280x1080
video.accelerate.hw=1
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
#Tweaks for RAM
ro.config.fha_enable=true
ro.sys.fw.bg_apps_limit=32
ro.config.dha_cached_max=16
ro.config.dha_empty_max=42
ro.config.dha_empty_init=32
ro.config.dha_lmk_scale=0.545
ro.config.dha_th_rate=2.3
ro.config.sdha_apps_bg_max=64
ro.config.sdha_apps_bg_min=8
#Internet Velocity
net.tcp.buffersize.default = 4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi = 4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts = 4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs = 4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge = 4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda = 4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa = 4096,87380,256960,4096,163 84,256960
#Signal Performance
ro.telephony.call_ring.delay=0
ring.delay=0
#Save Battery Without Performance Drop
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.security.mdpp.ux=Disabled
wifi.supplicant_scan_interval=180
persist.sys.storage_preload=0
wlan.wfd.hdcp=disable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
#Launcher Is Kept in Memory
ro.HOME_APP_ADJ=1
#Allow Purge of Assets To Free Ram
persist.sys.purgeable_assets=1
#Smooth Video Stream
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
#Force GPU Render On 2D Operations
debug.sf.hw=1
#Increase General Performance
debug.performance.tuning=1
#Google Assistant
ro.opa.eligible_device=true
#Sim Slot
ro.multisim.simslotcount=2
#Enable Faster Boot
ro.config.hw_quickpoweron=true
#Boot & Shutdown Animation FPS Boost
boot.fps=32
shutdown.fps=32
#Hibernate Device
persist.sys.shutdown.mode=hibernate
#Gaming Tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
#set default rendering to opengl from skiagl
debug.hwui.renderer=skiagl
#FDE CHANGE NAME
in terminal
setprop com.feravolt.fdeai.name AI_NAME
OR
put it in build.prop
com.feravolt.fdeai.name=InsertNameHere
#force the app to use 2.0 or vulkan
debug.hwui.renderer=vulkan
#Improve performance - Adreno Gpu gamers add these lines to build.prop and then restart the device. game perfomance should get better
com.qc.hardware=true
debug.composition.type=gpu
debug.egl.hw=1
debug.egl.profiler=1
debug.enabletr=true
debug.gralloc.enable_fb_ubwc=1
debug.overlayui.enable=1
debug.performance.tuning=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
debug.sf.hw=1
debug.sf.latch_unsignaled=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
hwui.disable_vsync=true
hwui.render_dirty_regions=false
ro.config.enable.hw_accel=true
ro.fb.mode=1
ro.product.gpu.driver=1
ro.sf.compbypass.enable=0
#misc/outhers
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.min_pointer_dur=1
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
wifi.supplicant_scan_interval=600
logcat.live=disable
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
ro.mot.eri.losalert.delay=1000
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
ro.config.nocheckin=1
windowsmgr.max_events_per_sec=150
# sys.use_fifo_ui=1
# persist.sys.scrollingcache=3
# windowsmgr.max_events_per_sec=300
# ro.max.fling_velocity=13800
# ro.min.fling_velocity=10500
# debug.kill_allocating_task=0
MIN_HIDDEN_APPS=false
ACTIVITY_INACTIVE_RESET_TIME=false
MIN_RECENT_TASKS=false
PROC_START_TIMEOUT=false
CPU_MIN_CHECK_DURATION=false
GC_TIMEOUT=false
SERVICE_TIMEOUT=false
MIN_CRASH_INTERVAL=false
ENFORCE_PROCESS_LIMIT=false
# ro.config.fha_enable=true
# ro.config.dha_cached_max=16
# ro.config.dha_empty_max=32
# ro.config.dha_empty_init=32
# ro.config.dha_lmk_scale=0.990
# ro.config.dha_th_rate=1.4
ro.config.sdha_apps_bg_max=64
ro.config.sdha_apps_bg_min=8
# Disable fast dormancy
ro.fast.dormancy=0
ro.config.hw_fast_dormancy=0
ro.ril.fast.dormancy.rule=0
# Enable fast dormancy
ro.fast.dormancy=1
ro.config.hw_fast_dormancy=1
ro.ril.fast.dormancy.rule=1
ro.semc.enable.fast_dormancy=true
# Disable IMS debug logs
# persist.ims.disableDebugLogs=1
# Disable quality control
# persist.radio.oem_socket=false
# set prefer network type
# LTE, GSM, WCDMA(9)
ro.telephony.default_network=10
telephony.lteOnCdmaDevice=1
telephony.lteOnGsmDevice=1
telephony.lte.cdma.device=1
telephony.lte.gsm.device=1
ro.ril.def.preferred.network=10
# Doze parameters
pm.sleep_mode=1
doze.display.supported=true
doze.pulse.notifications=true
doze.use.accelerometer=0
doze.pickup.vibration.threshold=2000
doze.pulse.brightness=5
doze.pulse.delay.in=200
doze.pulse.duration.in=1000
doze.pulse.duration.out=1000
doze.pulse.duration.visible=3000
doze.pulse.proxcheck=0
doze.pulse.schedule=1s,10s,30s,60s,120s
doze.pulse.schedule.resets=3
doze.pulse.sigmotion=0
doze.shake.acc.threshold=10
doze.vibrate.sigmotion=0
debug.doze.component=0
# Doze parameters
pm.sleep_mode=1
# Faster boot mode
# persist.sys.shutdown.mode=hibernate
# ro.config.hw_quickpoweron=true
# Set default power mode to low power for encoder
# vidc.debug.perf.mode=2
# Additional modified props
ro.config.nocheckin=1
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
wifi.supplicant_scan_interval=360
#miracast props
PRODUCT_PROPERTY_OVERRIDES += \
persist.debug.wfd.enable=1
#fix video calls have an audio echo problem - Add this to vendor's prop
ro.vendor.audio.sdk.fluencetype=fluence
#How to improve better signal reception/Fix signal
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#[FIX] NEW PUBGM UPDATE NOTCH
search for this "ro.product.model" set the value from "POCO F1" to "MI 8"
##FIX GPLAY
1. Clear App Data of Google Pay
2. Reboot to TWRP
3. Go to Advanced / File Manager
4. Navigate to file /data/data/com.google.android.gms/databases/dg.db
5. Select chmod, enter "440" and confirm
6. Reboot to System and you should be able to use Google Pay
##Magisk HIDE - Fix for vendor mismatch popup:
1. Install "magsisk hide props config" module from magisk downloads.
2. Install any terminal emulator from play store, I use terminus (as I use it for my ssh too). On terminus go to terminals>connect>local terminal.
3. Type su and hit enter.
4. Type props and hit enter.
5. Follow the instructions on screen to edit the fingerprint. Select your device in later steps. Reboot.
#FP FIX
TWRP, mount persist, /persist/data or /data/persist and remove all fingerprint_0_0 etc,
#FP FIX 2
download selinux switcher app, for example https://labs.xda-developers.com/store/app/com.ibuprophen.selinux set selinux for permissive, reboot phone, add fingerprint, then set selinux back to enforcing, and finally reboot. proof.
#Fix headphone volume - incall volume when your on a phone call:
Go to vendor>etc>mixer paths tasha (with an root explorer, edit it RX0 is default set to 84, set it to 90 or 92
Change it to 90-91 or 92
Save and reboot
Only change the RX0
MAY HAPPEN FROM ENTERING IN BOOTLOOP, I DON'T RESPONSIBLE FOR DAMAGE CAUSED OR DATE LOST BY USING THIS.

yeshua77 said:
#Speed Booster All Devices v7 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- DNS 1.1.1.1,1.0.0.1
- Power Saving
- GPU Performance
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Daisy v7.1 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- DNS 1.1.1.1,1.0.0.1
- Power Saving
- GPU Performance
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Fast Charging
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic All Devices v7.2 [Magisk Module]
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic Daisy v7.3 [Magisk Module]
- Good touch screen response
- Better response and speed
- Fast Charging
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
If you see something wrong please let me know as I am still learning.
If the device does not start, use magisk uninstaller.zip
#Tested on Android 9
#Magisk stable: https://github.com/ianmacd/MagiskBuilds?files=1
https://github.com/ianmacd/MagiskBuilds
https://t.me/magiskplus
MAY HAPPEN FROM ENTERING IN BOOTLOOP, I NOT RESPONSIBLE FOR DAMAGE CAUSED OR DATA LOST BY USING THIS ZIP.
Telegram: https://t.me/A2LiteOfficial
Click to expand...
Click to collapse
Have anybody tried it out yet? Any feedbacks?

chalseu said:
Have anybody tried it out yet? Any feedbacks?
Click to expand...
Click to collapse
Okay so I have tested it out, and I can notice some boost in performance and display responsiveness. Not too much, but noticeable. Have fun trying the module guys!
Uninstalled it because I already have FDE AI app which may conflict with this module.

Using 7.1 with FDE.AI, no issues so far. Asphalt 8 runs smooth at maxed settings.

leitseleac said:
Using 7.1 with FDE.AI, no issues so far. Asphalt 8 runs smooth at maxed settings.
Click to expand...
Click to collapse
Good to know! Thanks for sharing.

I have problems with hotspot. The device connecting to my hotspot can't access internet. Probably because of the Cloudflare DNS, but works fine with the Basic version.

anyone tried this with 10 GSI?

Will this work on MIUI11 custom rom?

Good module but I hate the touchscreen response...can I revert only the touchscreen sensitivity ?

notthesun said:
Good module but I hate the touchscreen response...can I revert only the touchscreen sensitivity ?
Click to expand...
Click to collapse
Updated, thanks for your feedback.

barumbads said:
Will this work on MIUI11 custom rom?
Click to expand...
Click to collapse
use the "All Devices" version.

hi, looks like its not working for me on daisy 10.0.13.0
the 7.1 breaks my edxposed, it shows not installed in xposed manager
and the 7.3 breaks ma magisk, it also says not installed in magisk manager
rom 10.0.13.0
magisk 19.3
riru core 19.1_2
riru edxposed 0.4.5.5_beta

update

yeshua77 said:
update
Click to expand...
Click to collapse
Thank you for the update :good: . all versions working for Q ? or v7.4.X only?

barumbads said:
Thank you for the update :good: . all versions working for Q ? or v7.4.X only?
Click to expand...
Click to collapse
Only the all devices version is compatible.

how to check this module function or not when done installing?

How can i use this? should i replace it with build.prop?
i mean the first comment, check it

what version should i use in your android 10 msm extended custom rom?

How do you uninstalled it?
chalseu said:
Okay so I have tested it out, and I can notice some boost in performance and display responsiveness. Not too much, but noticeable. Have fun trying the module guys!
Uninstalled it because I already have FDE AI app which may conflict with this module.
Click to expand...
Click to collapse