Related
[Custom Rom] Huawei Mate 8 - NXT-L29C432B582 - Custom System Update - ("V. 6")
I have merged my threads. Please look here:
https://forum.xda-developers.com/ma...mate-8-nxt-t3677961/post73901232#post73901232
ChinHon said:
[Custom Rom] Huawei Mate 8 - NXT-L29C432B582
- Custom System Update - ("V.6")
- EMUI 5.01 - Android 7 -
On TWRP backup basis.
This update replaces the [K-Rom-M8-V5].
Developed and tested on this device:
Huawei Mate 8 (NEXT)
Model number: Huawei NXT-L29
Build number: NXT-L29C432B582
- OTA updated.
- Without branding, with root and root access.
- TWRP recovery
Mods:
- Call Recorder
- KangVip Advanced settings
- Autostart administration in the phone manager (PM+)
- Viper 4 Android FX
- Obtaining OTA authorization
I couldn't test if this runs on Firmwares other regions.
I think the v6 is going on all regions on B582/592.
Quick guide for experienced users:
Please make a backup of your data with Huawei Backup and TWRP.
The Rom will be installed as if you wanted to restore a TWRP backup.
All your apps remain intact.
Conditions required:
- Firmware B582,
- TWRP recovery, (from download, or available from v5 )
- root is not necessary,
- OEM and FRP unlocked,
- USB Debugging on.
All required files are in the download folder.
You are familiar with the matter? Then let's go!
If available, uninstall these apps: SuperSu and Magisk.
A unroot is not necessary. Please do not download the downloads as "ZIP".
Installation:
1. Replace existing boot partition:
"2017-12-M8.B582.stock.kernel.boot"
copy in the TWRP backup directory to the ExtSd and restore.
2. Install update:
"2017-12-M8_B582_AdvS_Xposed_SystemUpdate"
also copy to the TWRP backup directory and restore."
3. Rooting:
- In TWRP mount Internal storage/ system,
- go to: Install, system/ k-rom/ set and install the SuperSU. zip.
- Reboot.
- After starting, take the BusyBox App from the download.
Then please use it to install its binaries.
- Install the PM+ app and bring the autostart administration to the phonemanager.
Iggnore the incompatibility warning.
Do not reboot between steps 1 to 3. Do not wipes before and after.
That's all. The installation is complete.
If Viper or Xposed have not been installed with it, this can be found in the
Advanced settings can be made up for.
Xposed is already active. In case the framework gets disabled,
in the Advanced settings. There's no way use other Xposed versions.
This also applies to SuperSU. They are not compatible with this system.
Both are optimized for this system.
Of course, you can also use Magisk to root later with the instructions
in the v5 thread. (loss of ota authorization)
Xposed does not run under magisk rooting together with the Advanced settings.
It must be used for a successful SafetyNet test, must be completely removed before rooting.
In the Kangvip Advanced settings do not use the Addblocker and "hide Activate NavBar".
Both works only on China Roms.
Hiding the NavBar can be done comfortably with the App "Tiles" from the playstore. (See v5)
In the K-Advanced Settings /tune cpu, some of the following are available.
Modifications of the computer performance possible. Those who need more power can do so.
Testing out the "Power save" options is useless. Did a lot of it.
The Huawei's own energy saving settings cannot be topped.
Good luck!
Thank you very much:
[KangVIP] (Advanced settings),
@Tecalote (SuperSU)
and Chainfire, Stephen (Stericson) + Jmz Software, Team Win RecoveryProject,
JRummy and Huawei Technologies Co., Ltd.
Hint:
Despite careful elaboration, I cannot guarantee that the execution of this manual will not cause any damage to the device or operating system and therefore I do not assume any liability for any damage or malfunction of the hardware and software! If you are still unsure, follow these steps: Follow the instructions only if you or your device is subject to any conditions (model number, Android version, etc.). Read the instructions carefully and completely, look up unknown terms. Check downloaded files for viruses. Make a backup of important settings and data. Do not follow the instructions if you do not know what you are doing.
These warnings must be logical. Please process my comments correctly.
Click to expand...
Click to collapse
you da man
Sent from my HUAWEI NXT-AL10 using Tapatalk
jbmc83 said:
you da man
Sent from my HUAWEI NXT-AL10 using Tapatalk
Click to expand...
Click to collapse
This rom is going really well. Especially Xposed. I haven't been able to get it that stable yet. I'm really glad I finally made it.
@jbmc83
I now have the link of the v2 you are looking for. Still interested?
ChinHon said:
@jbmc83
I now have the link of the v2 you are looking for. Still interested?
Click to expand...
Click to collapse
me
nikolas60 said:
me
Click to expand...
Click to collapse
Do you know what it's about? The link is for developers only.
ChinHon said:
@jbmc83
I now have the link of the v2 you are looking for. Still interested?
Click to expand...
Click to collapse
sure thing, lets have it that would be the HRT v2 right? would i be qualified for the link tho? im not a dev either
Sent from my HUAWEI NXT-AL10 using Tapatalk
Everyone who works on a rom is a developer!
Here the link friends.
https://pan.baidu.com/s/1bpJGYyb
It's not HRT. Should be better. Look closely at the zip, could have subdirectories.
ChinHon said:
Everyone who works on a rom is a developer!
Here the link friends.
https://pan.baidu.com/s/1bpJGYyb
It's not HRT. Should be better. Look closely at the zip, could have subdirectories.
Click to expand...
Click to collapse
ah yes, i remember that one! actually have it already, you had provided a link before still, thanks for your trouble!
apparently, there is a new chinese B593 out, although the full stock versions provided on firmware finder are not approved for installation, unfortunately... so they cant be flashed properly. still, nice to see development continuing
I'll continue, of course, because it's questionable whether we get oreo.
Has someone successfully installed my update on another region?
Please let us know.
ChinHon said:
I'll continue, of course, because it's questionable whether we get oreo.
Has someone successfully installed my update on another region?
Please let us know.
Click to expand...
Click to collapse
could get interesting next spring, maybe well have another shot at oreo then... still wondering what the heck @c|nder was up to with this thread here
https://forum.xda-developers.com/mate-8/orig-development/oreo-rom-1-0-mate-8-south-america-t3702767
jbmc83 said:
could get interesting next spring, maybe well have another shot at oreo then... still wondering what the heck @c|nder was up to with this thread here
https://forum.xda-developers.com/mate-8/orig-development/oreo-rom-1-0-mate-8-south-america-t3702767
Click to expand...
Click to collapse
How to make new roms when you can't get to the baidu downloads anymore?
ChinHon said:
How to make new roms when you can't get to the baidu downloads anymore?
Click to expand...
Click to collapse
question is rather: how to make new roms if there arent any new firmwares being developed officially?
Sent from my HUAWEI NXT-AL10 using Tapatalk
Yeah, that's an aspect too. Making a new rom after every update is somehow unproductive. Just because of the google patch? I only made my update because of the stable xposed. I only make new ones in the future if something fundamentally changes.
Any news about oreo guys?[emoji848]
.....
Wow this is great work, how about the data? Is it decrypted with this method?
(sorry for the noob question)
aaron13 said:
Wow this is great work, how about the data? Is it decrypted with this method?
(sorry for the noob question)
Click to expand...
Click to collapse
Thank you.
My rom is not encrypted. It also replaces only the boot and system partitions.
Since data remains unaffected, nothing changes. It remains as it was before installation.
ChinHon said:
Thank you.
My rom is not encrypted. It also replaces only the boot and system partitions.
Since data remains unaffected, nothing changes. It remains as it was before installation.
Click to expand...
Click to collapse
But it is rooted so titanium can be used?
aaron13 said:
But it is rooted so titanium can be used?
Click to expand...
Click to collapse
Yes!
Go with all my roms.
As we all know our 1+5T doesn't support project treble,
so my question is,
is this hardware or software dependent?
In other words,
is it possible for devs to find a way to implement it in future custom roms or in a kernel for our dumpling?
Or would this just be impossible?
Thanks in advance
Mikxx said:
As we all know our 1+5T doesn't support project treble,
so my question is,
is this hardware or software dependent?
In other words,
is it possible for devs to find a way to implement it in future custom roms or in a kernel for our dumpling?
Or would this just be impossible?
Thanks in advance
Click to expand...
Click to collapse
Good question.
At least one would need to repartition internal card, if I understood. This alone is not impossible but a bit hard and not without risk.
That said often I wonder if it could be possible to boot, say, TWRP (or any other Linux) from USB and take full dd backup of internal card for all certainty (and then repartition). This is how many Android TV boxes can be backed up (they use u-boot infrastructure). So why not phones?
Dior DNA said:
Good question.
At least one would need to repartition internal card, if I understood. This alone is not impossible but a bit hard and not without risk.
That said often I wonder if it could be possible to boot, say, TWRP (or any other Linux) from USB and take full dd backup of internal card for all certainty (and then repartition). This is how many Android TV boxes can be backed up (they use u-boot infrastructure). So why not phones?
Click to expand...
Click to collapse
indeed and that is what made me think, because aftervall, android is build upon lnnux
Mikxx said:
As we all know our 1+5T doesn't support project treble,
so my question is,
is this hardware or software dependent?
In other words,
is it possible for devs to find a way to implement it in future custom roms or in a kernel for our dumpling?
Or would this just be impossible?
Thanks in advance
Click to expand...
Click to collapse
This question has been discussed lots before.
https://forum.xda-developers.com/oneplus-5t/how-to/change-org-project-treble-op5t-t3709841
Implementing Project Treble would require repartitioning storage. Also, it gives literally zero benefit to a custom ROM.
TL;DR: It's never going to happen.
the Doctor said:
[...]Also, it gives literally zero benefit to a custom ROM.[...]
Click to expand...
Click to collapse
I mark these words. Have a nice day.
update
Perhaps there is no functional benefit. But porting seems easier for some devices:
What about :
https://www.xda-developers.com/samsung-galaxy-s9-aosp-android-oreo-project-treble/
This is the Samsung Galaxy S9 running on AOSP Android Oreo thanks to Project Treble
the Doctor said:
This question has been discussed lots before.
https://forum.xda-developers.com/oneplus-5t/how-to/change-org-project-treble-op5t-t3709841
Implementing Project Treble would require repartitioning storage. Also, it gives literally zero benefit to a custom ROM.
TL;DR: It's never going to happen.
Click to expand...
Click to collapse
But it happened ?
cubandanger05 said:
But it happened ?
Click to expand...
Click to collapse
Yup, somebody saw a mountain and decided to climb it. We'll see what comes of it.
Yeah mokee ROM has treble working on the OnePlus One 5T. There's an unused partition that can be created without re-partition in the device and if you install a regular ROM it doesn't see it you install a treble ready ROM and you previously had mokee installed according to the mokee dev it works. It uses the ab style of treble. There is an "a" and "ab" and "a/b" versions from what I read. Mokee is releasing nightlies of their ROM
Haven't tried it on mine pretty happy with the aicp Oreo that I'm running so I can't tell you what bugs it has. Google it XDA has a discussion on mokee and treble with OnePlus 5t
I've google for it. Basically it's a rom project by Google and native 8.0 phone support this.
So, our XA1 Ultra?
I've tried the Treble Check app for check the support ( according to them ) but with negative results such "Our database doesn't contain you phone name", pff!
Is there anyone who has already tried to install it? Will there really be a support? One chance?
There is also talk of partitions of type A/B...
SPLT said:
I've google for it. Basically it's a rom project by Google and native 8.0 phone support this.
So, our XA1 Ultra?
I've tried the Treble Check app for check the support ( according to them ) but with negative results such "Our database doesn't contain you phone name", pff!
Is there anyone who has already tried to install it? Will there really be a support? One chance?
There is also talk of partitions of type A/B...
Click to expand...
Click to collapse
We don't have treble, you need a custom kernel
Hi there,
I would like to install a AOSP ROM zip file, but whenever I look for it I never find it
Can someone help me please and give me some page or even a link?
Thank you
Hi all,
Here is the latest official update. please download to your device and update from system update - local update - install - enjoy.
If updare failed, please check the following:
1. is your current version is 4.16?
2. have you rooted or modified system?
3. have you installed 3rd party recovery?
link:
https://drive.google.com/file/d/1W3zFOUgF0S6WBRcy4-PKJf0TSVJEn71c/view?usp=drivesdk
Can someone give a gapps link?
lazye53 said:
Can someone give a gapps link?
Click to expand...
Click to collapse
you can download from official website: www.opengapps.org
No, my buddy does not work. Nubia is not a very solid firm in this regard, it does not load Google applications in a solid way.
lazye53 said:
No, my buddy does not work. Nubia is not a very solid firm in this regard, it does not load Google applications in a solid way.
Click to expand...
Click to collapse
no, the official ROM is very unfriendly with google, if you rely google much I suggest you to use 3rd party rom.
Why are there so few custom roms to try?
Support is minimal.
Other devices with the same equipment have far more rumors.
My other device even had treeble support.
lazye53 said:
Why are there so few custom roms to try?
Support is minimal.
Other devices with the same equipment have far more rumors.
My other device even had treeble support.
Click to expand...
Click to collapse
Nubia is not as famous as others, only few romers own it.
lazye53 said:
Why are there so few custom roms to try?
Support is minimal.
Other devices with the same equipment have far more rumors.
My other device even had treeble support.
Click to expand...
Click to collapse
As for Treble support, we are getting there... S_Y_ succceeded in making mokee for our device and made it support Treble.?
Hello everyone. I have a phone that launched with android 7. of course, it doesn't support project treble. I want to make my device become compatible with project treble. But I don't know what I need to do. I knew my device much be have vendor partition. That is. After repartition, I have this partition. What I need to do next? please help me
I have the same problem and I am searching for it hope i can find out the solution
Majd98SY said:
I have the same problem and I am searching for it hope i can find out the solution
Click to expand...
Click to collapse
Haha, me too. Searching for it for weeks, but i have found a youtube channel named AlasKa Linux User AKLU. He do guides (very good) for roms, but i don't know if he does treble or not.
Also i found this:
link.
If you find any clue then please PM me. I also want to build an android with treble.
Deleted since not a useful post
Arc android said:
Actually you can enable treble on your phone !!!!!!!! Just watch this video :
Click to expand...
Click to collapse
This doesn't work. You cannot enable treble by changing build.prop. If you follow these instructions, you risk bricking your device!
He just wants to get youtube ad-revenue!!!
Darkstriker said:
This doesn't work. You cannot enable treble by changing build.prop. If you follow these instructions, you risk bricking your device!
He just wants to get youtube ad-revenue!!!
Click to expand...
Click to collapse
Sorry !!!! I am new in the world of android, so I don't know many things. I thought maybe this would actually enable treble. And later I found that u can't on android 7 coz u won't get ro_treble_enabled=false in the build prop. So don't even watch this video!!!!!
Arc android said:
Sorry !!!! I am new in the world of android, so I don't know many things. I thought maybe this would actually enable treble. And later I found that u can't on android 7 coz u won't get ro_treble_enabled=false in the build prop. So don't even watch this video!!!!!
Click to expand...
Click to collapse
That toggle doesn't work, even if it exists. If you toggle it an trick android into trying to update your device, you have a high risk bricking your device and the odds of it actually succeeding are minimal. That property is NOT an enable or disable switch, it is the device manufacturer telling the OS that the device software does NOT support treble.
Enabling treble is not as simple as changing a switch in build.prop. Treble requires seperate vendor partion. You need to repartition the device. People have been successful in doing that for mi A1. look here :
[GUIDE] [Q&A] [TREBLE] From Stock to Treble - everything you need to know!
Here I will share all the info you need to know about using Treble on the Mi A1. Everyone is more than welcome to ask questions and clarification here, I am happy to answer and will update this thread over time. Thanks! Contents 0. Key Terms...
forum.xda-developers.com
any luck here?