I am attempting to flash a treble supported GSI with a supported recovery.
I have selected Linage OS 15.1 Unofficial GSI to test and came to a confusion.
Please help me in making a valid decision.
Screenshot of download links is included.
Thank You!
///\\\
Screenshot
It's only A device
Select A-Only. As we don't have Seamless system update Support.
Ummm did it boot?
ashwinonm said:
Ummm did it boot?
Click to expand...
Click to collapse
Nopes.
It comes back again and agian to fastboot.
Also, I have /factory partition.
Wipe data, cache and flash that gsi using twrp install image method, should work.
sanketp60 said:
Nopes.
It comes back again and agian to fastboot.
Also, I have /factory partition.
Click to expand...
Click to collapse
First download aicp full treble supported unooficail rom boot in to that go to recovery than flash gsi it will work in that way...
kashyapp said:
First download aicp full treble supported unooficail rom boot in to that go to recovery than flash gsi it will work in that way...
Click to expand...
Click to collapse
Can you Link the AICP Unofficial build which will help me?
Thank You
///\\\
sanketp60 said:
AICP Unofficial build
Click to expand...
Click to collapse
https://forum.xda-developers.com/le...icp-13-0-oreo-8-0-0-official-t3689030/page124
Related
Your risk use rom
Not my responsibility any thing do your phone:good:
IF YOU LIKE ONLY THANKS
?This rom fully stock deodex rom
stock applications full remove
Volume safe warning remove
Power menu in recovery mode add
Volume panel in colour change
VOLTE support
I have j710FN working wall
If you have j710F/MN/GN try your risk but backup recommends after try ROM:laugh:
Battery backup is friendly
Thanks to @geiti94 to share dump stock
Thanks to 4pda dev Игорь19780204 to allowd me share hear his mod
Thanks to @ASSAYYED Kitchen
Download link
https://drive.google.com/file/d/0B5UVDZxkMqyGeWF4ckhlZ1hsSkk/view?usp=drivesdk
Rom flash after magisk recommends v13.3
Bug lock screen pattern/password start in wait
Same like stock bug
So don't say me fix
Contact me Telegram KNIGHT139
what about lockscreen delay..
jochester said:
what about lockscreen delay..
Click to expand...
Click to collapse
Yas wait after on
I am on stock MM Rom. Can you please tell me how i can flash this rom??? Thanks
husen4u said:
I am on stock MM Rom. Can you please tell me how i can flash this rom??? Thanks
Click to expand...
Click to collapse
Yes mm after Flash TWRP format
And flash rom
X-MAN said:
Flash TWRP format
And flash rom
Click to expand...
Click to collapse
Thank you for reply. Just want to ask if i can flash this rom on marshmallow?
How to flash rom use twrp recovery and flash
X-MAN said:
How to flash rom use twrp recovery and flash
Click to expand...
Click to collapse
Thanks a lot. Appreciate It.
I have to unlock bootloader before flash twrp?
mksail said:
I have to unlock bootloader before flash twrp?
Click to expand...
Click to collapse
You have in developer options enable OEM unlock. After you can flash TWRP and put Rom.
NICE MATE
ermakovermakov7878 said:
You have in developer options enable OEM unlock. After you can flash TWRP and put Rom.
Click to expand...
Click to collapse
THANKS bro
Works Samsung Always On Display???
Diegocbv111 said:
Works Samsung Always On Display???
Click to expand...
Click to collapse
? AOD and BLF not in ROM
X-MAN said:
AOD and BLF not in ROM
Click to expand...
Click to collapse
=(
Someone installed this Rom in the J710MN, works perfect or gives brick on the mobile ...
---------- Post added at 15:37 ---------- Previous post was at 15:25 ----------
Samsung Cloud works and Wi-Fi Direct, is fixed the lock screen bug when using pattern or password and the Wi-Fi removed passwords are saved.
First i install the rom and after magisk v 13.3 to root?
bogdan003 said:
First i install the rom and after magisk v 13.3 to root?
Click to expand...
Click to collapse
1st rom INSTALL
2nd flash magisk
Reboot phone
Hello, i would share this with all those having Nubia Z17S
here's a link to MOKEE rom for NX595J only
i have tested it and it works.
installation
1- you need TWRP 3.2.1 installed
2- Before installing, be sure to do format data partition and full cleaning!
3- After installation do not reboot! Return to the main page - Advanced Toolbox - turn off the boot authentication, after that you can reboot.
4-DO IT AT YOUR OWN RISK
5- Enjoy
Download:
MEGA
Original thread:
https://bbs.nubia.cn/thread-1158509-1-1.html
Have someone tried this ROM as a daily ROM ? Any feedback ?
Thanks
This is suppose to be Z17 thread why mention z17s or z11 or whatever? isn't this wrong?
I agree, this seems to be in the wrong place. Why Nubia Z17S doesn't have a own topic? People can easily make a mistake and install this software on Z17.
evronetwork said:
This is suppose to be Z17 thread why mention z17s or z11 or whatever? isn't this wrong?
Click to expand...
Click to collapse
There is no subforum for Z17s ! Where should we post ?
spctoma said:
There is no subforum for Z17s ! Where should we post ?
Click to expand...
Click to collapse
Maybe request XDA to create Z17S subforum?
smich_ayane said:
Hello, i would share this with all those having Nubia Z17S
here's a link to MOKEE rom for NX595J only
i have tested it and it works.
installation
1- you need TWRP 3.2.1 installed
2- Before installing, be sure to do format data partition and full cleaning!
3- After installation do not reboot! Return to the main page - Advanced Toolbox - turn off the boot authentication, after that you can reboot.
4-DO IT AT YOUR OWN RISK
5- Enjoy
Download:
MEGA
Original thread:
https://bbs.nubia.cn/thread-1158509-1-1.html
Click to expand...
Click to collapse
Прошу не выкладывать здесь зеркала с 4pda.ru !!!
spctoma said:
Have someone tried this ROM as a daily ROM ? Any feedback ?
Thanks
Click to expand...
Click to collapse
I have tested it.
The only problem is the very low brightness after boot. Is there a way to increase it manually over 100% ?
j0nj0n said:
I have tested it.
The only problem is the very low brightness after boot. Is there a way to increase it manually over 100% ?
Click to expand...
Click to collapse
Need patch
dead link
how can add nubia camera to this rom ? please
delete...
slimr1 said:
https://r.tapatalk.com/shareLink?ur...hare_fid=3793&share_type=t&share_pid=74779455
https://drive.google.com/open?id=15PC80rwZ7_v2gczfGD2irFI8J-JLUa8V
Odesláno z mého NX563J
Click to expand...
Click to collapse
thank for best support ihave and quation this camera can use portrate mode thank to reply:laugh::laugh:
Hello,
is it possible to have capture of the interface? Are notifications on the screen saver working?
The beta version Nubia UI v506 based android8.1
for me the rom does not work it stays in bootloop
format data if bootloop
Wonderful ROM great features!
dantonuci said:
format data if bootloop
Wonderful ROM great features!
Click to expand...
Click to collapse
The file is gone...
kenzo_cz said:
the beta version nubia ui v506 based android8.1
Click to expand...
Click to collapse
how can i download this rom ?
anybody using this rom?
are there other working roms for the nx595j?
Hello,
How can I insert a Treble Rom custom app?
thank you in advance
Heinzx3 said:
Hello,
How can I insert a Treble Rom custom app?
thank you in advance
Click to expand...
Click to collapse
Download treble recovery image and flash it
Can we flash gsi roms ?
cjprostar said:
Can we flash gsi roms ?
Click to expand...
Click to collapse
Of course, we have twrp.
hehk1234 said:
Of course, we have twrp.
Click to expand...
Click to collapse
Hi, sorry for the dumb question but is it safe to flash magisk? I'm on the global beta available from the 'Unlock Bootloader' post.
The thread will be deprecated.
Go to https://forum.xda-developers.com/t/...-x-for-redmi-note-8-8t-ginkgo-willow.4233515/
Flash latest android 10 firmware？
Any hope for adding 8T support to the ROM?
thanks, which gapps to use?
sim card not recognized...
Cheers working good with clean flash so far.
I can't get Magisk to work though. It just boots to fastboot after flashing magisk...
hi everyone, I did a clean flash, I was on crdroid 6.12, why is my sim card not recognized?
Anyone installed it pls give some screenshots of settings, customisations, QS, Power Menu.
ep0ch2 said:
Cheers working good with clean flash so far.
I can't get Magisk to work though. It just boots to fastboot after flashing magisk...
Click to expand...
Click to collapse
To answer myself, for Magisk, at the time of writing use Canary build.
support encryption?
ep0ch2 said:
Cheers working good with clean flash so far.
I can't get Magisk to work though. It just boots to fastboot after flashing magisk...
Click to expand...
Click to collapse
Please use magiskR
wsdyleon said:
Flash latest android 10 firmware？
Click to expand...
Click to collapse
yes
darkherman said:
support encryption?
Click to expand...
Click to collapse
Sorry, no support
yoyo-went said:
hi everyone, I did a clean flash, I was on crdroid 6.12, why is my sim card not recognized?
Click to expand...
Click to collapse
Try to flash the latest firmware
zixuanf said:
Try to flash the latest firmware
Click to expand...
Click to collapse
Sim working
zixuanf said:
Sorry, no support
Click to expand...
Click to collapse
How rare is an A11 rom for ginkgo that supports encryption, do you want me to share the developer source?
darkherman said:
How rare is an A11 rom for ginkgo that supports encryption, do you want me to share the developer source?
Click to expand...
Click to collapse
link
zixuanf said:
link
Click to expand...
Click to collapse
Kyvangka1610 - Repositories
Kyvangka1610 has 25 repositories available. Follow their code on GitHub.
github.com
Will using Sixteen Kernel as a base have anything to do with that?
darkherman said:
Kyvangka1610 - Repositories
Kyvangka1610 has 25 repositories available. Follow their code on GitHub.
github.com
Will using Sixteen Kernel as a base have anything to do with that?
Click to expand...
Click to collapse
I read the source code carefully, no changes, the only difference is the kernel.
darkherman said:
Kyvangka1610 - Repositories
Kyvangka1610 has 25 repositories available. Follow their code on GitHub.
github.com
Will using Sixteen Kernel as a base have anything to do with that?
Click to expand...
Click to collapse
The latest Octavi , encryption has been broken .