Hii,
I have installed cm14 and now want to go back to stock but twrp 3.0.2.2 is not able to flashany(both stable and community bulids) oxygen os plz help
Twrp works.
You may need to flash firmware, first. Read OP of the rom you want to flash.
Balaji Dasari said:
Hii,
I have installed cm14 and now want to go back to stock but twrp 3.0.2.2 is not able to flashany(both stable and community bulids) oxygen os plz help
Click to expand...
Click to collapse
You need a modified TWRP version for flashing OOS based roms:
Updated TWRP Recovery Needed 3.0.2-22 available HERE Credits @eng.stk
---------- Post added at 11:37 AM ---------- Previous post was at 11:36 AM ----------
null0seven said:
Twrp works.
You may need to flash firmware, first. Read OP of the rom you want to flash.
Click to expand...
Click to collapse
Firmware is already integrated in the official rom files
Related
Hello,
I am currently using Blisspop 4.0.1 on Yureka and want the device to be on Stock Cyanogen OS 12. Searched Yu Official Forum, here and google too but I cant seem to find exact steps required to do this over custom rom.
Can someone please help with the steps or point me to the link which has exactly same situation like mine ?
paramjeetgem said:
Hello,
I am currently using Blisspop 4.0.1 on Yureka and want the device to be on Stock Cyanogen OS 12. Searched Yu Official Forum, here and google too but I cant seem to find exact steps required to do this over custom rom.
Can someone please help with the steps or point me to the link which has exactly same situation like mine ?
Click to expand...
Click to collapse
in recovery-
clean data/dalvik/system/cache and then install flash this ROM
cm-12.0-YNG1TAS1K0-tomato-signed zip file from Yureka forum.
shashank1320 said:
in recovery-
clean data/dalvik/system/cache and then install flash this ROM
cm-12.0-YNG1TAS1K0-tomato-signed zip file from Yureka forum.
Click to expand...
Click to collapse
TWRP or stock cm recovery or anything will do..??
cksup said:
TWRP or stock cm recovery or anything will do..??
Click to expand...
Click to collapse
anyone will do. Better to go with TWRP latest and if you change your mind later to install some other latest custom ROMs, then you wont face any issue with inbuilt root permission with latest TWRP (as some of them not working on older TWRP) and also TWRP is better for the backup and restore as well.
Been a while since I flashed my ROM and just found about treble enabled images which have been made available for my device but are rather new.
I understand that treble roms add the vendor partition which I assume remains untouched when you flash a new treble ROM but I expect there needs to be a bit of change to partition tables when you first upgrade to a treble based ROM?
If that is the case, what happens if I want to go back to an earlier 7.1 based ROM for example? Is it just a matter of flashing that again in TWRP and it will rebuild the partitions or does that become a little problematic?
It needs rebuilding of nougat partitions for your device,oreo vendor and treble is not supported bu nougat
---------- Post added at 03:44 AM ---------- Previous post was at 03:43 AM ----------
It needs rebuilding of nougat partitions for your device,oreo vendor and treble is not supported by nougat
OK, so is that possible by simply flashing back a nougat ROM with TWRP or do you need to repartition with ODIN?
bunta126 said:
OK, so is that possible by simply flashing back a nougat ROM with TWRP or do you need to repartition with ODIN?
Click to expand...
Click to collapse
It depends. On unofficial treble devices (Xiaomi) ,you don't even have to do anything more than a normal flash.But if you are using official treble by OEM,(like Huawei and Samsung),then you need to follow official ways to full downgrade to nougat.
I am on firmware 8.11.22 , currently have twrp orange. getting error 7 always while flashing LOS 15.1. is it coz of firmware? there is xiaomi's antirollback so is it safe to flash miui 8.9.14 firmware via miflash?
No, ARB Protection not implemented on Mix 2. Have you tried with another revovery?
Yes. Error 7 is always Firmware mismatch. Look up what version the ROM needs.
---------- Post added at 04:14 AM ---------- Previous post was at 04:09 AM ----------
Harshavarbm13 said:
I am on firmware 8.11.22 , currently have twrp orange. getting error 7 always while flashing LOS 15.1. is it coz of firmware? there is xiaomi's antirollback so is it safe to flash miui 8.9.14 firmware via miflash?
Click to expand...
Click to collapse
I have tried all the Roms for the phone and have used all. Currently back to default with root. Just Google Xiaomi Mi Mix 2 FW and get the latest one. LOS is Android 9.0, so you need the FW for Android 9.0.
I somewhat have the same problem but for me I get the Error 7 by trying to flash Omnirom 9.0 every damn time
Marlonese said:
I somewhat have the same problem but for me I get the Error 7 by trying to flash Omnirom 9.0 every damn time
Click to expand...
Click to collapse
Flash the latest FW for Omni Rom. Easy fix.
---------- Post added at 07:46 AM ---------- Previous post was at 07:29 AM ----------
Marlonese said:
I somewhat have the same problem but for me I get the Error 7 by trying to flash Omnirom 9.0 every damn time
Click to expand...
Click to collapse
Use FW 8.9.20+. The link to 8.9.20 is posted in OMNI forum. Or Google Xiaomi Mi Mix 2 Firmware and download the latest. Any ROM that is based on Android 9 will give you Error 7 ( Red text error) if you don't have the right FW.
Problem solved. Thanks for confirming that there is no anti rol back in mix 2. flashed fw 8.4.19 and flashed LOS. Enjoying the rom.
Android 10 official china stable- https://hugeota.d.miui.com/20.1.7/miui_BEGONIA_20.1.7_0b83fef2aa_10.0.zip
Expect global soon
Dos you installed on phone?
AvengerAnonymous said:
Dos you installed on phone?
Click to expand...
Click to collapse
Hey I have some unlock issues but the device with china rom can install it without that also
New rom android 10 stable. I has flashed successfully Chinese android 10 rom for note 8 pro.
And this is beta ro, MIUI 11 20.1.7
bahuy2003 said:
New rom android 10 stable. I has flashed successfully Chinese android 10 rom for note 8 pro.
Click to expand...
Click to collapse
can you tell me how to install from global rom?
Any initial findings so far? Anything not working properly? I'm looking to give it a go, is it stable enough for a daily driver even if i like to live on the edge
iflawlietasgod said:
can you tell me how to install from global rom?
Click to expand...
Click to collapse
1. Flash recovery TWRP.
2. Go into recovery.
3. Wipe data/cache.
4. Flash rom android 10.
5. Format data.
6. Reboot system.
---------- Post added at 04:40 AM ---------- Previous post was at 04:39 AM ----------
tomgiannelli said:
Any initial findings so far? Anything not working properly? I'm looking to give it a go, is it stable enough for a daily driver even if i like to live on the edge
Click to expand...
Click to collapse
This rom is good, every things work well for me.
https://hugeota.d.miui.com/V11.0.1.0.QGGCNXM/miui_BEGONIA_V11.0.1.0.QGGCNXM_6ea29705c9_10.0.zip
Can I install on an unlocked bootloader?
I'm dumb
bahuy2003 said:
1. Flash recovery TWRP.
2. Go into recovery.
3. Wipe data/cache.
4. Flash rom android 10.
5. Format data.
6. Reboot system.
---------- Post added at 04:40 AM ---------- Previous post was at 04:39 AM ----------
This rom is good, every things work well for me.
Click to expand...
Click to collapse
thank you, I successfully installed it do you know how to root it?
iflawlietasgod said:
thank you, I successfully installed it do you know how to root it?
Click to expand...
Click to collapse
No, i can't root it. I tried many ways to root my device, but i can't.
Has anyone flashed miui china based Android 10 (Official miui or Xiaomi.eu or miui pro) in the Indian variant of redmi note 8 pro? There is Miui Pro v20.1.16-10 available in miuipro fans Telegram channel. Any suggestions or steps for Indian variant?
Anyone running an Android Q GSI with Magisk installed? If so, can you send me the version number and region (Global, China, China Dev) of the stock ROM you are coming from? What GSI are you running and what steps did you take?
I can get Magisk to install with Xiaomi EU, but I prefer to use Pixel Experience Q. The fingerprint sensor works in almost all GSIs now, but I really need to get Magisk working so I can run ANX Camera. When I install any version of Magisk via zip or patched images I get a loop at the Mi logo. If I patch recovery I can boot into the GSI, but Magisk is not showing as installed.
Any alternate methods to get ANX Camera installed would be greatly appreciated as well. I actually don't do much with root access.
hmm
dbjungle said:
Anyone running an Android Q GSI with Magisk installed? If so, can you send me the version number and region (Global, China, China Dev) of the stock ROM you are coming from? What GSI are you running and what steps did you take?
I can get Magisk to install with Xiaomi EU, but I prefer to use Pixel Experience Q. The fingerprint sensor works in almost all GSIs now, but I really need to get Magisk working so I can run ANX Camera. When I install any version of Magisk via zip or patched images I get a loop at the Mi logo. If I patch recovery I can boot into the GSI, but Magisk is not showing as installed.
Any alternate methods to get ANX Camera installed would be greatly appreciated as well. I actually don't do much with root access.
Click to expand...
Click to collapse
is the Pixel Experience Q rom for Mi 9se? I am about to install cruDroid and I wanna compare and see. If so link to the Pixel Experience thread.
mikededo4 said:
is the Pixel Experience Q rom for Mi 9se? I am about to install cruDroid and I wanna compare and see. If so link to the Pixel Experience thread.
Click to expand...
Click to collapse
I ended up going with the Official Derpfest Q rom after fooling around trying to get Magisk working on GSIs for several days.
PE GSI
https://forum.xda-developers.com/pr...sion/gsi-expressluke-built-gsis-t4003457/amp/
DF ROM
https://sourceforge.net/projects/derpfest/files/grus/DerpFest-10-Official-grus-20200401.zip/download
dbjungle said:
I ended up going with the Official Derpfest Q rom after fooling around trying to get Magisk working on GSIs for several days.
PE GSI
https://forum.xda-developers.com/pr...sion/gsi-expressluke-built-gsis-t4003457/amp/
DF ROM
https://sourceforge.net/projects/derpfest/files/grus/DerpFest-10-Official-grus-20200401.zip/download
Click to expand...
Click to collapse
thank you ill let you know my results.
---------- Post added at 03:22 AM ---------- Previous post was at 03:11 AM ----------
dbjungle said:
I ended up going with the Official Derpfest Q rom after fooling around trying to get Magisk working on GSIs for several days.
PE GSI
https://forum.xda-developers.com/pr...sion/gsi-expressluke-built-gsis-t4003457/amp/
DF ROM
https://sourceforge.net/projects/derpfest/files/grus/DerpFest-10-Official-grus-20200401.zip/download
Click to expand...
Click to collapse
how do I know if i should download arm64ab or arm64a? just to make sure I get the latest and right version.
mikededo4 said:
thank you ill let you know my results.
---------- Post added at 03:22 AM ---------- Previous post was at 03:11 AM ----------
how do I know if i should download arm64ab or arm64a? just to make sure I get the latest and right version.
Click to expand...
Click to collapse
You need an A/B rom, but you can use the Treble Info app on any phone if you are ever unsure. I'm under the impression that any phone shipped with Android 9 or higher should use A/B roms because it should be system as root. Anyone correct me if I'm wrong.