IIIIII'm stuck! - T-Mobile LG G3

Long story short - Bought an LG D851 off Swappe. It came with CM13. I've been sticking nightlies on it. Currently on 2/14. I tried to put 2/18 and found that TWRP wasn't working - it hangs on TWRP Splace. Then I noticed SuperSU wasn't on the phone. So I installed it. Can't update the binaries. Looks like I don't have root.
Used LG Flash tool and flashed D85120E_00.kdz. Part way through, I get an error that the software cannot communicate with the server and it asks if I want to abort. I let it continue.
The phone reboots, I get the "Android is updating 1/196", etc. After which, it reboots, I get the boot jingle, and then it holds on the T-Mobile screen. I've tried flashing the KDZ a few times with the same result.
So now, I humbly, yet again, ask for help.
The endgoal here, is to have a working ROM with BT and WiFi working. I really don't care what it is at this point. Marshmallow is nice. Lollipop is okay. Whatever. I just need a working phone.
Thanks in advance, as always.

mdphoenix said:
Long story short - Bought an LG D851 off Swappe. It came with CM13. I've been sticking nightlies on it. Currently on 2/14. I tried to put 2/18 and found that TWRP wasn't working - it hangs on TWRP Splace. Then I noticed SuperSU wasn't on the phone. So I installed it. Can't update the binaries. Looks like I don't have root.
Used LG Flash tool and flashed D85120E_00.kdz. Part way through, I get an error that the software cannot communicate with the server and it asks if I want to abort. I let it continue.
The phone reboots, I get the "Android is updating 1/196", etc. After which, it reboots, I get the boot jingle, and then it holds on the T-Mobile screen. I've tried flashing the KDZ a few times with the same result.
So now, I humbly, yet again, ask for help.
The endgoal here, is to have a working ROM with BT and WiFi working. I really don't care what it is at this point. Marshmallow is nice. Lollipop is okay. Whatever. I just need a working phone.
Thanks in advance, as always.
Click to expand...
Click to collapse
Ouch!!! Read my CM13 post...you don't need SuperSU anymore (CM13 has root built in)--I had the same problem a while back--fixed it by flashing the old factory version on the phone & then used Purple Drake to root it & then installed CM13...Was a HARD lesson for me.
Upshot---No SuperSU needed--No BusyBox needed on CM13. If you are used to the old way of doing things--you'll get B0rked big time.
Luck to you!!!!

debianmain1 said:
Ouch!!! Read my CM13 post...you don't need SuperSU anymore (CM13 has root built in)--I had the same problem a while back--fixed it by flashing the old factory version on the phone & then used Purple Drake to root it & then installed CM13...Was a HARD lesson for me.
Upshot---No SuperSU needed--No BusyBox needed on CM13. If you are used to the old way of doing things--you'll get B0rked big time.
Luck to you!!!!
Click to expand...
Click to collapse
I guess trying to push the SuperSU binaries is what effed up TWRP?
I'll check out your CM13 post. But the issue I have is that I can't flash a factory version with LG Flash Utility. I mean, it does, but now it just sits on the Tmobile splash.
Hopefully your post will show me something I missing.
@debianmain1 is this the post you're talking about? http://forum.xda-developers.com/showpost.php?p=65432245&postcount=158
I tried that DD command to no avail last night. I tried everything I could find before reaching out to everyone for help.

mdphoenix said:
I guess trying to push the SuperSU binaries is what effed up TWRP?
I'll check out your CM13 post. But the issue I have is that I can't flash a factory version with LG Flash Utility. I mean, it does, but now it just sits on the Tmobile splash.
Hopefully your post will show me something I missing.
@debianmain1 is this the post you're talking about? http://forum.xda-developers.com/showpost.php?p=65432245&postcount=158
I tried that DD command to no avail last night. I tried everything I could find before reaching out to everyone for help.
Click to expand...
Click to collapse
Yes--the SuperSU binaries B0rked my install real good ( as I understand it--2 different types of SU installed B0rks everything )..... And with CM13, you have to allow ADB & apps to have root. I've been modding phones for years now & CM13 threw me under the bus until I learned what to do... I use to ALWAYS root, install BusyBox & SuperSU---not with CM13
Ya--that won't help you I'd look up fastboot commands & try to flash it that way--sounds like you are stuck in a startup bootloop. I did see some info online about starting the G3 in fastboot--I had a very hard time getting my G3 fixed. Do you have a Linux computer to use? It's easier to work with some of the diag stuff with Linux.

debianmain1 said:
Yes--the SuperSU binaries B0rked my install real good ( as I understand it--2 different types of SU installed B0rks everything )..... And with CM13, you have to allow ADB & apps to have root. I've been modding phones for years now & CM13 threw me under the bus until I learned what to do... I use to ALWAYS root, install BusyBox & SuperSU---not with CM13
Ya--that won't help you I'd look up fastboot commands & try to flash it that way--sounds like you are stuck in a startup bootloop. I did see some info online about starting the G3 in fastboot--I had a very hard time getting my G3 fixed. Do you have a Linux computer to use? It's easier to work with some of the diag stuff with Linux.
Click to expand...
Click to collapse
I can always fire up an Ubuntu flash drive if necessary. I'll get working on Fastboot.
Thanks again!
@debianmain1 Hmmm, Fastboot doesn't seem to be functional. I've got download mode. Can I push something to it that way?

I managed to get somewhere yesterday. I tried flashing D85120e_00.kdz and it failed again. I got the "cannot communicate with server" error, then it rebooted and tried running initial setup and failed.
So I tried flashing D85110C_00.kdz. Much to my surprise, it worked! So I ran through initial setup and got the phone working to make sure all was well. I rebooted and got the Red 2. So now here I am. Guides show that I should be able to put it in download mode and reload factory firmware again. But all I get is the "Download Mode" graphic. It never switches over to the updating mode with the circular arrows. I fear the worst at this point, but I really don't know enough about the LGs to diagnose my own doom just yet.

Someone on Reddit pointed me in the direction of Board Diag. Unfortunately it doesn't appear to work on D851. Running out of options. Looks like it'll end up being an expensive learning experience.

Related

[Q] Failed Sprint Note 2 Root Stuck in Loop, Dev not answering

I attempted a root on Samsung Note 2 Sprint version (in white). Followed all steps, however phone got stuck in a reboot loop right after I put the option 2 (root only) Odin step in. Sprint ver LPH889 (I believe that is what Odin is calling it, option 72). Toolkit used was ADB 4.1.0.
Original symptoms were that the Android updater was looping trying to load everything; being new I made it worse and tried recoveries and reloads which also failed. Now it boots, goes to splash, circling blue oval image and...it stays there.
Good news: I have access to download mode and recovery reset mode (including sideloading).
Bad news: every thread I've followed has given me an issue.
I have recovery access but I need some idea of where to go from here and searches have shown near but not exact symptoms. I have unplugged it from the pc, removed the battery, done a factory reset, attempted to reflash via Odin (root) attempted to reflash stock via Odin and so far I am still stuck in a reboot loop. Windows detects the phone but shows a problem in device manager because possibly it won't stop rebooting. Any help you can provide is appreciated and if at all possible I need to recover some form of working phone here, and soon. My girl needs it for work and Sprint's network in my area barely works from day to day (which they admit but don't credit my account for). This phone has problems sending/receiving calls, they claim it's fine, and I was forced to try a root to get some form of working device. That failed too.
I'm a newb at this...it's been years since I flashed a phone (Razor v3), so...any help would be appreciated, otherwise I have to crawl to sprint/samsung and get it replaced, which I don't want to do. Thanks.
doesitwork? said:
I attempted a root on Samsung Note 2 Sprint version (in white). Followed all steps, however phone got stuck in a reboot loop right after I put the option 2 (root only) Odin step in. Sprint ver LPH889 (I believe that is what Odin is calling it, option 72). Toolkit used was ADB 4.1.0.
Original symptoms were that the Android updater was looping trying to load everything; being new I made it worse and tried recoveries and reloads which also failed. Now it boots, goes to splash, circling blue oval image and...it stays there.
Good news: I have access to download mode and recovery reset mode (including sideloading).
Bad news: every thread I've followed has given me an issue.
I have recovery access but I need some idea of where to go from here and searches have shown near but not exact symptoms. I have unplugged it from the pc, removed the battery, done a factory reset, attempted to reflash via Odin (root) attempted to reflash stock via Odin and so far I am still stuck in a reboot loop. Windows detects the phone but shows a problem in device manager because possibly it won't stop rebooting. Any help you can provide is appreciated and if at all possible I need to recover some form of working phone here, and soon. My girl needs it for work and Sprint's network in my area barely works from day to day (which they admit but don't credit my account for). This phone has problems sending/receiving calls, they claim it's fine, and I was forced to try a root to get some form of working device. That failed too.
I'm a newb at this...it's been years since I flashed a phone (Razor v3), so...any help would be appreciated, otherwise I have to crawl to sprint/samsung and get it replaced, which I don't want to do. Thanks.
Click to expand...
Click to collapse
What method are you using to root.....I used the "toolkit" and had no problems at all.
http://forum.xda-developers.com/showthread.php?t=1957155....try this if you haven't already
vel7wil said:
What method are you using to root.....I used the "toolkit" and had no problems at all.
http://forum.xda-developers.com/showthread.php?t=1957155....try this if you haven't already
Click to expand...
Click to collapse
I thought it would to but I did not want to dig through 70+ pages of the thread when searching failed...unless I really needed to. Most of it is old and doesn't apply.
I was directed by the referenced Youtube vid. I used the options referenced for the phone in this thread with that toolkit. I backed up existing files (not as one unit, but internal files and I think OS), went for the option 2, followed the instructions and things went great through odin...until android went to update and started looping with the 'updating files' percentages. At that point I tried to restore to basic and started clearing caches and such and that is how I got to where I am.
When that failed I started looking at the leaked stock flash and that failed on shoot.ini which that guy never addressed because he thought his international version was all versions (that's why I choose 'doesitwork?' as screen name ). So i'm down to sideloading or something. I really need guidance, and I emailed the toolkit author but I'm still waiting on a reply.
Any thoughts?
doesitwork? said:
I thought it would to but I did not want to dig through 70+ pages of the thread when searching failed...unless I really needed to. Most of it is old and doesn't apply.
I was directed by the referenced Youtube vid. I used the options referenced for the phone in this thread with that toolkit. I backed up existing files (not as one unit, but internal files and I think OS), went for the option 2, followed the instructions and things went great through odin...until android went to update and started looping with the 'updating files' percentages. At that point I tried to restore to basic and started clearing caches and such and that is how I got to where I am.
When that failed I started looking at the leaked stock flash and that failed on shoot.ini which that guy never addressed because he thought his international version was all versions (that's why I choose 'doesitwork?' as screen name ). So i'm down to sideloading or something. I really need guidance, and I emailed the toolkit author but I'm still waiting on a reply.
Any thoughts?
Click to expand...
Click to collapse
When used the toolkit a year ago, I found that I had to turned off all firewalls and antivirus apps for it to work properly. Once I did that it worked fine....give it a shot...can't hurt......might even be able to repair what you've done so far.....Good Luck!!!
I'll give this my best shot...download a rooted rom from the development section and place it on your SD card.
Download toolkit from here (I take no credit for this) http://d-h.st/iu0
Put phone in download mode.
Open ODIN and uncheck "auto reboot". Then click "PDA" and add the .tar file (recovery).
Plug phone into PC (make sure to have samsung drivers installed).
Once ODIN sees the phone you can click "start".
When the recovery flash is complete, pull your battery to ensure power down.
Boot into recovery : volume up, home, power all at the same time.
Flash rooted rom.
Toolkit is an extra and unnecessary step.
http://rwilco12.com/downloads.php?d...ung Galaxy Note II (SPH-L900)/Stock ROMs/MC2/
Grab the one click flavor of choice. Use the one with 1090526 in the name as that's the full version.
Open in windows, put phone in download mode and flash. Easy Peasy.
Let me know if you have any issues with this.
Sorry for the late reply, I had some issues with the "catchpa".
The one click fix worked like a charm, thank you! I will soon be making a contrib to the site. It's a shame I couldn't root as easily :laugh: .
I know the level of work that goes into this stuff and the desire to keep on top of new gear while maintaining support for the old and I appreciate the community coming to my aid, so again, thank you!
---------- Post added at 08:14 AM ---------- Previous post was at 07:36 AM ----------
[/COLOR]
doesitwork? said:
Sorry for the late reply, I had some issues with the "catchpa".
The one click fix worked like a charm, thank you! I will soon be making a contrib to the site. It's a shame I couldn't root as easily :laugh: .
I know the level of work that goes into this stuff and the desire to keep on top of new gear while maintaining support for the old and I appreciate the community coming to my aid, so again, thank you!
Click to expand...
Click to collapse
It is usually a pretty common courtesy to hit the "thanks button" when someone helps you out.
I am not at all trying to be mean, just letting you know.
garwynn said:
Toolkit is an extra and unnecessary step.
http://rwilco12.com/downloads.php?d...ung Galaxy Note II (SPH-L900)/Stock ROMs/MC2/
Grab the one click flavor of choice. Use the one with 1090526 in the name as that's the full version.
Open in windows, put phone in download mode and flash. Easy Peasy.
Let me know if you have any issues with this.
Click to expand...
Click to collapse
hello @garwynn im trying to do this same thing.. its been so long since ive odin'd, how would i put TWRP on this now after these steps? i tried goomanager and that didnt work. (couldnt find recovery) and i tried flashing in stock recovery and got a fail . im kind of lost right now and am wondering if there is another way or do i have to do the toolkit? thanks
edit: for some reason, the tool kit links have been pulled by a mod. ..but this video helped me get twrp back. phew. zedomax to the rescue.. http://www.youtube.com/watch?v=7leb9OznhqY

Phone Bricked, can anyone help please??

so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Penley94 said:
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Click to expand...
Click to collapse
The key here is going to be getting back into recovery. Have you tried getting into Download Mode? If you saw the LG logo then you SHOULD be able to get into download mode. Make sure the phone is completely powered off. Connect the USB to your pc but before you connect the other end to your phone, hold volume up then connect it. You should see "Download Mode" on the screen. You will see other directions for download mode but for me this always works, usb to pc, hold volume up then plug the phone in while still holding the volume up. If you can get into Download Mode you can flash a teenybin to get back into recovery following the guide in this thread here.
Currently even if you can get into Download Mode adb might not recognize your phone(at least it never did for me). Once you flash a teenybin using LGNPST, you should be able to get into Recovery. Once in Recovery you can use adb to pull your files off of the phone and onto your computer. I use it from a linux terminal but there are guides available for Windows if that's what you use. The adb guide should be easy to find on xda(just search) so I haven't linked to it. Once adb is set up on your computer AND you can get into Recovery you can use the command 'adb pull /data/media' without quotations and it will copy the contents of your internal storage to your pc. However if you can get into recovery you do have other options for just getting the phone back up and running. This guide here should also help.
If you are familiar with irc(internet relay chat) you can hop onto freenode and enter the #lg-optimus-g channel. As soon as you enter the channel you will see "Need Help? You won't read this but..." followed by a link. All the files for LGNPST, teenybins, and in depth tutorials on fixing a soft brick will be found there. I hope this helps you and hooray for me because this is my 200th post!
PS - If you can't get into Download Mode then your secondary bootloader is gone and there isn't anything you can do(to my knowledge). However, like I said, if you saw the LG logo at all, Download mode should still be an option. Also keep in mind these instructions are for the Sprint(ls970) lg optimis g. I believe the keys are flipped on AT&T/International models(Volume Down when you plug it in to get to Download Mode).
HPTesla said:
The key here is going to be getting back into recovery. Have you tried getting into Download Mode? If you saw the LG logo then you SHOULD be able to get into download mode. Make sure the phone is completely powered off. Connect the USB to your pc but before you connect the other end to your phone, hold volume up then connect it. You should see "Download Mode" on the screen. You will see other directions for download mode but for me this always works, usb to pc, hold volume up then plug the phone in while still holding the volume up. If you can get into Download Mode you can flash a teenybin to get back into recovery following the guide in this thread here.
Currently even if you can get into Download Mode adb might not recognize your phone(at least it never did for me). Once you flash a teenybin using LGNPST, you should be able to get into Recovery. Once in Recovery you can use adb to pull your files off of the phone and onto your computer. I use it from a linux terminal but there are guides available for Windows if that's what you use. The adb guide should be easy to find on xda(just search) so I haven't linked to it. Once adb is set up on your computer AND you can get into Recovery you can use the command 'adb pull /data/media' without quotations and it will copy the contents of your internal storage to your pc. However if you can get into recovery you do have other options for just getting the phone back up and running. This guide here should also help.
If you are familiar with irc(internet relay chat) you can hop onto freenode and enter the #lg-optimus-g channel. As soon as you enter the channel you will see "Need Help? You won't read this but..." followed by a link. All the files for LGNPST, teenybins, and in depth tutorials on fixing a soft brick will be found there. I hope this helps you and hooray for me because this is my 200th post!
PS - If you can't get into Download Mode then your secondary bootloader is gone and there isn't anything you can do(to my knowledge). However, like I said, if you saw the LG logo at all, Download mode should still be an option. Also keep in mind these instructions are for the Sprint(ls970) lg optimis g. I believe the keys are flipped on AT&T/International models(Volume Down when you plug it in to get to Download Mode).
Click to expand...
Click to collapse
Thank you for the response, i just tryed to get in to download mode and it went in to it fine. I would try to do all that to repair it but I dont want sprint to see that its rooted and it I cant have it be fixed when the new phone comes in, the only thing that i want is to get my files from it. Is there any way that I can just do that but leave the phone the way it is? (Not booting up passed the lg logo) I want the new phone because my current Optimus G's battery is going pretty bad I think and I would like a new one.
Penley94 said:
Thank you for the response, i just tryed to get in to download mode and it went in to it fine. I would try to do all that to repair it but I dont want sprint to see that its rooted and it I cant have it be fixed when the new phone comes in, the only thing that i want is to get my files from it. Is there any way that I can just do that but leave the phone the way it is? (Not booting up passed the lg logo) I want the new phone because my current Optimus G's battery is going pretty bad I think and I would like a new one.
Click to expand...
Click to collapse
There are plenty of ways to get it stuck at the lg logo, sometimes it happens just from dirty flashing a rom, sometimes because you install a rom without wiping dalvik/cache. But you should know if you are on Sprint, one of the reasons I stick with them(even though their coverage is horrible in my area) is because rooting DOES NOT void your warranty with Sprint. They will warn you against it but they are the only carrier that allows rooting and will still fix your phone. Here is some info on that here. They won't advertise it but it's the truth. But bricking your phone intentionally is pretty easy I think. After getting back your data, just go into recovery and start deleting stuff you normally wouldn't. It's similar to opening up your car's hood and saying "This looks important" and ripping it out, lol. At this point that's what I would do, fixing your rooted phone is within their warranty, replacing it(which is what you want) I'm not 100% on. Although the post I linked to, says even ordering a replacement on a rooted phone is covered. Its in a reply on that page, you'll see another link. So you could get your info, use a different LGNPST file to set your phone back to factory(which will relock the bootloader and lose root) and then you can do what you did to get there in the first place or root it and start deleting important files with a root explorer to get it back to being stuck. Hope this helps.
HPTesla said:
There are plenty of ways to get it stuck at the lg logo, sometimes it happens just from dirty flashing a rom, sometimes because you install a rom without wiping dalvik/cache. But you should know if you are on Sprint, one of the reasons I stick with them(even though their coverage is horrible in my area) is because rooting DOES NOT void your warranty with Sprint. They will warn you against it but they are the only carrier that allows rooting and will still fix your phone. Here is some info on that here. They won't advertise it but it's the truth. But bricking your phone intentionally is pretty easy I think. After getting back your data, just go into recovery and start deleting stuff you normally wouldn't. It's similar to opening up your car's hood and saying "This looks important" and ripping it out, lol. At this point that's what I would do, fixing your rooted phone is within their warranty, replacing it(which is what you want) I'm not 100% on. Although the post I linked to, says even ordering a replacement on a rooted phone is covered. Its in a reply on that page, you'll see another link. So you could get your info, use a different LGNPST file to set your phone back to factory(which will relock the bootloader and lose root) and then you can do what you did to get there in the first place or root it and start deleting important files with a root explorer to get it back to being stuck. Hope this helps.
Click to expand...
Click to collapse
Oh wow I never knew that but that helps a lot thanks for the help, the sprint guy said theydid a master reset or hard reset or soemthing like that, does that mean it deleted all my pictures and everything? And i understand what you mean to rebrick it that's pretty simple. When i get my new optimus is there a new root out for the update? And what roms do you prefer?
Penley94 said:
Oh wow I never knew that but that helps a lot thanks for the help, the sprint guy said theydid a master reset or hard reset or soemthing like that, does that mean it deleted all my pictures and everything? And i understand what you mean to rebrick it that's pretty simple. When i get my new optimus is there a new root out for the update? And what roms do you prefer?
Click to expand...
Click to collapse
If they did a hard reset it is possible that it wiped everything but not a definite. I purchased my phone from Best Buy and was on zvb. When the zvc update came through it messed my phone up(which is why you don't take OTA's once rooted without further knowledge/modifications) so I took it to Best Buy and they said they did a hard reset to fix it. It worked, my phone booted back up and my internal was fine. However, that's Best Buy and they barely know what they are doing so it may have been a soft reset, I am not 100% sure. As for a new root for the update, I received another phone shortly after because the glass back on mine broke and Best Buy replaced it with a whole new phone. It was on zvc and I used an app named Framaroot with the Gandalf exploit option and it worked fine for me. I have heard of others having issues with that method but for me, it worked and has stuck.
Fiddy619's universal root method seems to be the preferred way for our phone, look in the general section here for a thread by engine95 to see what I mean. After I rooted with Framaroot I then used FreeGee and unlocked the bootloader then made a total nandroid backup of my stock in TWRP before going further. I also copied the backup to my PC just in case.
As for my preferred roms, if we are talking about Android 4.4 both Vanir and PSX are my personal favorites. However as you can tell from my signature I am still using stock zvc android 4.1.2. I have flashed just about every rom available for our phone but my daily driver is stock that I have modified manually(different kernel, removed bloat ware, minor modifications and tweaks, etc). For android 4.3 I have had the best experience with CM10.2 and cfxe. I have not tried CM11(based on 4.4) for awhile but it seems to have overwhelming support - Cyanogenmod usually does.
Really when it comes to roms it's personal preference. They are all very similar with different tweaks/additions. As for which one is the most stable that is also a tricky question. Even though we have the same model of phone, I have seen how picky they can be from one to the other. My roommates have the EXACT same phone, installing CM10.2 worked fine for two of us, but one lost GPS and I had to fix it.
My best advice for when you get your new phone is to backup your working stock and then have fun flashing different things making sure you follow the instructions per rom exactly. It's always a good idea after making your backup(if planning to install another rom) to wipe everything except your internal storage and do a clean install of the rom and gapps. Then, test it for a day or so because sometimes it takes time to settle in. It's a shame that Optimus DE gave you issues, it was rock solid for me, again, these phones are picky! But one of the main reasons I stayed with stock is because the AOSP based cameras leave much to be desired when compared to the LG camera. Again it's just personal preference because some don't like the lg camera.
If you have any other issues or questions I will be glad to help if I can. A lot of the people you see who are active on the forums are very knowledgeable, as long as you ask politely most will be glad to help.
HPTesla said:
If they did a hard reset it is possible that it wiped everything but not a definite. I purchased my phone from Best Buy and was on zvb. When the zvc update came through it messed my phone up(which is why you don't take OTA's once rooted without further knowledge/modifications) so I took it to Best Buy and they said they did a hard reset to fix it. It worked, my phone booted back up and my internal was fine. However, that's Best Buy and they barely know what they are doing so it may have been a soft reset, I am not 100% sure. As for a new root for the update, I received another phone shortly after because the glass back on mine broke and Best Buy replaced it with a whole new phone. It was on zvc and I used an app named Framaroot with the Gandalf exploit option and it worked fine for me. I have heard of others having issues with that method but for me, it worked and has stuck.
Fiddy619's universal root method seems to be the preferred way for our phone, look in the general section here for a thread by engine95 to see what I mean. After I rooted with Framaroot I then used FreeGee and unlocked the bootloader then made a total nandroid backup of my stock in TWRP before going further. I also copied the backup to my PC just in case.
As for my preferred roms, if we are talking about Android 4.4 both Vanir and PSX are my personal favorites. However as you can tell from my signature I am still using stock zvc android 4.1.2. I have flashed just about every rom available for our phone but my daily driver is stock that I have modified manually(different kernel, removed bloat ware, minor modifications and tweaks, etc). For android 4.3 I have had the best experience with CM10.2 and cfxe. I have not tried CM11(based on 4.4) for awhile but it seems to have overwhelming support - Cyanogenmod usually does.
Really when it comes to roms it's personal preference. They are all very similar with different tweaks/additions. As for which one is the most stable that is also a tricky question. Even though we have the same model of phone, I have seen how picky they can be from one to the other. My roommates have the EXACT same phone, installing CM10.2 worked fine for two of us, but one lost GPS and I had to fix it.
My best advice for when you get your new phone is to backup your working stock and then have fun flashing different things making sure you follow the instructions per rom exactly. It's always a good idea after making your backup(if planning to install another rom) to wipe everything except your internal storage and do a clean install of the rom and gapps. Then, test it for a day or so because sometimes it takes time to settle in. It's a shame that Optimus DE gave you issues, it was rock solid for me, again, these phones are picky! But one of the main reasons I stayed with stock is because the AOSP based cameras leave much to be desired when compared to the LG camera. Again it's just personal preference because some don't like the lg camera.
If you have any other issues or questions I will be glad to help if I can. A lot of the people you see who are active on the forums are very knowledgeable, as long as you ask politely most will be glad to help.
Click to expand...
Click to collapse
Okay Im going to try some new roms out when I get my new phone, I would like to try out an AOSP Kitkat Rom but I couldnt get one to flash last time I tryed but I will figure that out later when I get it. Now back to my Bricked Optimus, I want to try the teenybin method although I dont understand the directions... the second step tells me to flash but how can I do that without recovery? and it doesnt say anything about entering in download mode which is the only thing I can do, am I forgetting something? And thank you for the help Tesla I really appreciate it, Ive had more assistance from you than anyone else.
Penley94 said:
Okay Im going to try some new roms out when I get my new phone, I would like to try out an AOSP Kitkat Rom but I couldnt get one to flash last time I tryed but I will figure that out later when I get it. Now back to my Bricked Optimus, I want to try the teenybin method although I dont understand the directions... the second step tells me to flash but how can I do that without recovery? and it doesnt say anything about entering in download mode which is the only thing I can do, am I forgetting something? And thank you for the help Tesla I really appreciate it, Ive had more assistance from you than anyone else.
Click to expand...
Click to collapse
Are you a windows user? The teenybin isn't flashed from recovery it is flashed from a tool called LGNPST which is a Windows program. I am going to private message you a link. It will have links for downloading and installing LGNPST on your PC. It says that you will lose all your data but if you are using the teenybin you shouldn't. It's LG's tool for flashing firmware and gives that warning regardless of what you flash. And you're welcome, coming from an EVO 4G this phone is very different and plenty of people have helped me - just paying it forward.
HPTesla said:
Are you a windows user? The teenybin isn't flashed from recovery it is flashed from a tool called LGNPST which is a Windows program. I am going to private message you a link. It will have links for downloading and installing LGNPST on your PC. It says that you will lose all your data but if you are using the teenybin you shouldn't. It's LG's tool for flashing firmware and gives that warning regardless of what you flash. And you're welcome, coming from an EVO 4G this phone is very different and plenty of people have helped me - just paying it forward.
Click to expand...
Click to collapse
Hey I got in to recovery through the Teenybin although the reset that they did deleted all of my stuff so Im kinda bummed:/ but its okay cause I got my new Optimus today and its brand new so Im happy with it. Thanks again for all of the help. Thats funny that you used to have an EVO 4G because I had it for so long and thats the phone I switched back to when my LG got bricked, but let me tell you Im glad to be back to the Optimus haha the EVO 4G is just way to slow anymore. Now that I have this new Optimus which root method should I go with? Its currently runnning ZVB (4.1.2) should I update the software? It says theres a software update available but I know that sometimes they dont have roots out for those updates so how should I start with this process again with the new phone in your opinion? I havnt done this in forever (going on a year) so I cant really remember everything that I had to do.
Penley94 said:
Hey I got in to recovery through the Teenybin although the reset that they did deleted all of my stuff so Im kinda bummed:/ but its okay cause I got my new Optimus today and its brand new so Im happy with it. Thanks again for all of the help. Thats funny that you used to have an EVO 4G because I had it for so long and thats the phone I switched back to when my LG got bricked, but let me tell you Im glad to be back to the Optimus haha the EVO 4G is just way to slow anymore. Now that I have this new Optimus which root method should I go with? Its currently runnning ZVB (4.1.2) should I update the software? It says theres a software update available but I know that sometimes they dont have roots out for those updates so how should I start with this process again with the new phone in your opinion? I havnt done this in forever (going on a year) so I cant really remember everything that I had to do.
Click to expand...
Click to collapse
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Exactly what he said, framaroot was quick and easy for me, but the lgog is so damn picky and fiddy seems to be the preferred method so use it just to be safe. I had zero issues with framaroot but I think I've just been lucky. And definitely update to zvc before doing either. I'd also update prl and profile for good measure.
That sucks that you lost all of your data, they must have actually did a hard reset where as BestBuy told me they did a hard reset and actually did a soft reset. But it's BestBuy so I never expect much. I softbricked my lgog the day after I got it using the GAIO tool(before finding out about FreeGee) and they fixed it with a soft reset. The guy called the manager over and the manager asked me if I tried unlocking the bootloader and I played dumb. My exact words were "What the hell is a bootloader?" and he immediately fixed it. But I was shocked anyone at BestBuy would even know that. Lmao.
As for my EVO, the micro usb port broke so I was charging it for two months like MacGyver, literally stipped the usb charging wire and hooked it straight into the positive/negative terminals in the battery while turned off! It was a fire hazard but it did the trick, lol. And luckily it had external sd(my one big gripe about the lgog) so I could still get my stuff off of it even without usb. I did love that phone, but you're right, it's incredibly slow now compared to the wonderful lgog.
And as always you are quite welcome!
---------- Post added at 07:39 PM ---------- Previous post was at 07:30 PM ----------
Penley94 said:
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
Click to expand...
Click to collapse
I think the reason I say framaroot is bc its also super easy, install the app, pick gandalf exploit and it will do it's thing - done without ever connecting to a pc. But @engine95 is right, fiddy is more stable so use that. As for TWRP, I love 2.5.0.0 but for KK roms you have to use the one that comes with updated FreeGee, TWRP 2.6.3.x because of the SELinux changes Google made with 4.4. TWRP 2.6 was unstable originally but has since become just as stable as 2.5 according to most. OpTimuS DE was rock solid for me, as for getting some of the G2 apps, I'm not certain. It's doable but I don't know how difficult it would be because I've never tried to install them elsewhere. And I already gave you my choice of best current KK roms but today I found out a few guys are trying to get OMNI official for us. When that happens I think I will be switching to OMNI because they have been producing some impressive commits/tweaks that you won't find elsewhere. Just look through xda news to see what I mean, OMNI is on a roll!
Penley94 said:
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
Click to expand...
Click to collapse
I prefer TWRP just because that has always been our best one since the beginning. Now that all the versions of the OG are coming together though both are fine.
I like stock, but Lrod's OpTimuS 5.0 is my daily. The G2 adds he made got me hooked.
If your gonna try to pull some stuff from DE, check with Lrod. He's made alot of changes to a lot of files making it difficult. For me at least.
I've ran all the KK Roms and I liked them all. PSX is probably my favorite though. I liked Liquid in its early days, pre KK. I'm not sure it's up to KK yet.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
I prefer TWRP just because that has always been our best one since the beginning. Now that all the versions of the OG are coming together though both are fine.
I like stock, but Lrod's OpTimuS 5.0 is my daily. The G2 adds he made got me hooked.
If your gonna try to pull some stuff from DE, check with Lrod. He's made alot of changes to a lot of files making it difficult. For me at least.
I've ran all the KK Roms and I liked them all. PSX is probably my favorite though. I liked Liquid in its early days, pre KK. I'm not sure it's up to KK yet.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Again, I think you're right on all fronts. Liquid was smooth(heh) but it hasn't been long since we received an official 4.3 so I don't think they're up to 4.4. And same goes for the G2 apps, sometimes it's as simple as pulling an apk out of a zip and pushing it to system/apps and changing permissions but I think Lrod did a lot of work to get the G2 apps working on our phone because they required certain dependencies/modified frameworks.
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Okay so I rooted it through fiddys universal root but when I try to go on to FreeGee it just doesnt want to open for me? Ive tryed a lot of times and I get nothing it will either send me to the playstore to an app called busy box or will sometimes restart my phone, Im confised I have no clue what to do? I tryed to uninstall and reinstall and nothing I installed the busybox app but it said I didnt have root permission or there was a problem getting the root or something like that.
Penley94 said:
Okay so I rooted it through fiddys universal root but when I try to go on to FreeGee it just doesnt want to open for me? Ive tryed a lot of times and I get nothing it will either send me to the playstore to an app called busy box or will sometimes restart my phone, Im confised I have no clue what to do? I tryed to uninstall and reinstall and nothing I installed the busybox app but it said I didnt have root permission or there was a problem getting the root or something like that.
Click to expand...
Click to collapse
You have to root before unlocking.
Make sure your phone has at least 70 percent charge or more!!
Go to Settings: Settings>Security>Unknown sources checked: Settings>Developer Options>USB Debugging checked, Settings> Display>Screen Timeout - at least 5 min
from fiddy thread.
Directions
1. Unzip the zip file
2. Make sure USB Debugging is on, and you are in Charge only Mode
3. Run the CurrentRoot.bat, wait for the prompt. (Can now be run as admin if you wish, Still works running as regular user tho. Thanks robisodd)
4. Change to MTP Mode
5. Just ignore when your computer asks how to view files on your device.
6. Press enter in the CMD prompt to continue.
7. Done.
You shouldn't have any issues.
If you do, then try Framaroot. http://forum.xda-developers.com/showthread.php?t=2130276 and follow those directions.
Follow this. http://forum.xda-developers.com/showthread.php?t=2050582 It has all the info on rooting and unlocking
Edit. You may have to root as admin/not admin, try both.
Edit #2 Also, do not use USB 3.0 ports. They are iffy for this stuff. LGNPST included
engine95 said:
You have to root before unlocking.
Make sure your phone has at least 70 percent charge or more!!
Go to Settings: Settings>Security>Unknown sources checked: Settings>Developer Options>USB Debugging checked, Settings> Display>Screen Timeout - at least 5 min
from fiddy thread.
Directions
1. Unzip the zip file
2. Make sure USB Debugging is on, and you are in Charge only Mode
3. Run the CurrentRoot.bat, wait for the prompt. (Can now be run as admin if you wish, Still works running as regular user tho. Thanks robisodd)
4. Change to MTP Mode
5. Just ignore when your computer asks how to view files on your device.
6. Press enter in the CMD prompt to continue.
7. Done.
You shouldn't have any issues.
If you do, then try Framaroot. http://forum.xda-developers.com/showthread.php?t=2130276 and follow those directions.
Follow this. http://forum.xda-developers.com/showthread.php?t=2050582 It has all the info on rooting and unlocking
Edit. You may have to root as admin/not admin, try both.
Edit #2 Also, do not use USB 3.0 ports. They are iffy for this stuff. LGNPST included
Click to expand...
Click to collapse
Okay i will try this later when i have access to a computer, but the last root i tryed told me it was successful although it didnt restart my phone or anything it just said it was in the command prompt. I will try again cause i dont think it did anything. But i have a question about roms, i am most likely going to flash the DE 5.0 again because i like it with the g2 keyboard and i kind of like the lg feel to it but the only problem is google play music always gives me an error when im playing songs and it always has. I heard aosp roms dont have that problen so in your opinion what is the most stable aosp rom with all features working like gps and everything??
Penley94 said:
Okay i will try this later when i have access to a computer, but the last root i tryed told me it was successful although it didnt restart my phone or anything it just said it was in the command prompt. I will try again cause i dont think it did anything. But i have a question about roms, i am most likely going to flash the DE 5.0 again because i like it with the g2 keyboard and i kind of like the lg feel to it but the only problem is google play music always gives me an error when im playing songs and it always has. I heard aosp roms dont have that problen so in your opinion what is the most stable aosp rom with all features working like gps and everything??
Click to expand...
Click to collapse
AOSP SuperNexus has been getting good reviews here in the forums but I haven't tried it yet. I would give that one a shot though. I'd flash GAPPS standard with it instead of GAPPS core as well. This is just generally speaking with any of the AOSP roms.
The directions @engine95 gave you for fiddy are spot on(as usual ), specifically having the phone in charge only mode instead of mtp. I think a lot of people have missed that step and it won't work in mtp. Using usb 2.0 is another good tip.
And if your phone didn't reboot, you probably arent rooted. Easiest way to check that you are rooted is by going into the app drawer and seeing either Superuser or SuperSu app. If it's there, you're rooted, if not, it didnt work. If it said it worked but didnt reboot, Im assuming you rebooted manually? It sounds silly but sometimes it's as simple as that. But again, after rebooting if one of those apps arent there, you are not rooted.
EDIT: I've never tried rooting with fiddy without being in charge only mode, Im wondering if being in mtp may install supersu/superuser app but not the binary? Probably not but I could be wrong. Just wondering if there is any possible way that the app could be there but you still wouldn't have root privileges. For me, if the app is there, I'm rooted but I don't pretend to know everything(far from it, lol).
EDIT#2: Once you are rooted and recovery is installed, here is the link to SuperNexus.
EDIT#3: And I can't stress this one enough....after rooting and unlocking the bootloader, before flashing ANYTHING, make a full backup of your stock AND copy the TWRP folder(with your backup in it) to a computer, JUST IN CASE! That way you will always have a backup elsewhere, even if something goes wrong with your phone's internal storage. Better safe than sorry!!! And it's also best to copy the entire TWRP folder.
@HPTesla You're on a roll!
Go with everything he's said.
I don't use Google music ,so I'm of little help there.
Almost every ROM has its quirks, and it's just a matter of finding the one that does what you need/want.
Our devs have given us a lot of options. And I know, I sure appreciate them.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Penley94 said:
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Click to expand...
Click to collapse
I ran OpTiMuS for a long time and every time I would try new roms, decide I didn't like or whatever and go back, I'd always have to 1. Dial ##72786# 2. Let it self activate sometimes twice, but usually just once before I would pick up 3g/4g. May have just been my phone but you may try that out if you go back to optimus De. Over all, my favorite stock like rom though.
Sent from my Optimus G using XDA Premium 4 mobile app

Blu Advance 4.0 L A010U ROMs

Hey guys,
I really need to find at least the stock ROM for the new-ish Blu Advance 4.0L (model A010U), because the most recent OTA update unforgivingly bricked mine. Now I want to try to re-flash the stock ROM, but I am also open to custom ROMs, if there are any available. Please help me out! Thanks in advance
I am really surprised no one has replied yet, but again I am facing the same problem and I've been searching the Internet for one month now and I found absolutely nothing for this phone (specifically for version A010U).
So I am going to post a different question in the hopes that someone will read it and help us out:
I have two Blu Advance 4.0 L A010U phones, which are identical except for the color (white and green). They were manufactured a month apart one in 10/2015 and one in 9/2015.
Unfortunately after only a couple of months of light use and for no apparent reason (did not drop it, or wet it, etc) it started going through a boot loop. It will start, show the "bold like us" logo then restart again without making it to the operating system at all. Like I said I've been looking for over a month to find a ROM (stock or modded) to reflash but with no luck. Then I had an idea. Since I have the other identical phone that's working fine, is there a trick I can do using the working phone to create a ROM that I can use in my broken one. By the way, the non working phone will allow me to get into the recovery menu, but unfortunately nothing happens if I wipe the cache or even if I reset to factory defaults.
Anyone knows what's causing that "boot loop", how to fix it and where to find a ROM or even "extract" or "create" one using a working Advance 4.0 L ???
Thank you very much!
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Deuler93 said:
Hey guys,
I really need to find at least the stock ROM for the new-ish Blu Advance 4.0L (model A010U), because the most recent OTA update unforgivingly bricked mine. Now I want to try to re-flash the stock ROM, but I am also open to custom ROMs, if there are any available. Please help me out! Thanks in advance
Click to expand...
Click to collapse
I just got ahold of a couple of these devices myself and am in the process of going through all the in's and out's of them....I'm a Samsung nerd so I haven't messed with something like these in a while but I got one (that was supposedly dead bricked per the lady friend of mine I got them from) at least able to boot into factory mode and recovery via ADB and just as I'm posting this I'm in adb shell going through the device's internal memory.....so we'll see what all I find and can pull out of this one and possibly know enough to post an intelligible reply with solutions next time
The boot looping sounds like a common problem with these and when I get to that point I'm going to get rid of the stock bootanimation.zip ASAP and try something else. I get the idea that these things aren't exactly power houses built for much so the littlest thing or small bug in their coding could lead to this kind of crap happening.
Hopefully you figure yours out before I toss these out the window! lol
Cheers y salud!
---------- Post added at 02:27 AM ---------- Previous post was at 02:20 AM ----------
good.m. said:
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Click to expand...
Click to collapse
Forgot to add a couple things about your post, sorry! I beleive (and I just started digging into this phone) that the no command part is the locked bootloader these phones appear to have. I think it was a combo of holding both volume buttons down from a powered off state then pressing power button on that came up with the option for factory mode or recovery (which led to the sad 'no command' droid), i went into factory mode and theres an option for Tp Upgrade which Im assuming is F/W or something similar but I just hooked up to the PC and in that mode it's reading the internal and external memory of the phone and that's about where I'm at so far.
Wow! I'm surprised this thread is still going.
Anywho, I found a repository that is storing the default ROM for the 4.0L. The files were just added recently. I would have liked to have seen a custom Lollipop ROM made by now, but this device is far too irrelevant to get any attention, unfortunately. Just root and forget, I guess.
I can't wait to try it, thank you! And btw, were you able to get root successfully and if so, how?
Deuler93 said:
Wow! I'm surprised this thread is still going.
Anywho, I found a repository that is storing the default ROM for the 4.0L. The files were just added recently. I would have liked to have seen a custom Lollipop ROM made by now, but this device is far too irrelevant to get any attention, unfortunately. Just root and forget, I guess.
Click to expand...
Click to collapse
Hey Deuler93 -
You have my respect for digging out that BLU ROMs link and sharing with the rest of us. I downloaded the one for my Advance and used SP flash tool to flash the phone that was stuck on a boot-loop. Of course first I had to download and install the MediaTeK drivers for USB connectivity with my PC. Everything worked flawlessly, no glitches what so ever. All these links are easily found and widely available online if anyone is interested I can share here too. I just hope that this boot-loop was due to some software glitch and not hardware failure. Everything seems to work fine for now, keepint my fingers crossed it will NOT happen again.
Well, one less headache to worry about. By the way we're not that far, if you're ever in the Chicago area, I owe you a beer or something. Thank you!
Hi guys !
Thank you very much for the Advance 4.0L Roms.
I have successfuly recovered my phone, but the IMEI got lost.
So, I need to root it in order to recover the IMEI, but I just can´t get success on any method :
Kingroot
Framaroot
Towelroot
is there another way to root it ?
Thank you very much.
I got temporary root using the kingroot apk. But it messed things up and I don't trust it anymore. None of the other mentioned methods worked for me either, maybe try the PC kingroot method
well this helps one thing
good.m. said:
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Click to expand...
Click to collapse
umm. . . when the no command option comes up just press the power button and the rest of options will appear. doesnt exactly solve your problem however unless you have the ZIP file to install, which is what I'm looking for.
What might happen if a ROM is used for another blu phone. ??
A similar phone as well.
Plz advise.
Damn! This thread just keeps going!
I haven't even looked here in a while, so I will bunch my commentary here. I'm also salaried now, so I bought into a OnePlus X (onyx), a more expensive cheapo device, so I do not use the 4.0L anymore.
As for rooting tools, I used the Kingroot APK successfully in the stock environment. I never tried flashing something SuperSU myself, but it could work. Is flashing a SU app possible from the fastboot interface?
And to Steve's question - it is technically possible to flash a ROM for a different device onto your own device, but is considered a bad idea due to the possibility of introducing incompatibilities and missing proprietary requirements. I feel like this would hold especially true to stock ROMs because the manufacturer probably has no interest in supporting anything more than the device that they are manufacturing for. Doing so removes many possible "compatibility" issues from even having to be considered, but I digress. In short, try to find a ROM made for your device and your device only.
Did you find the zip file for the recovery
Marya Wynter said:
umm. . . when the no command option comes up just press the power button and the rest of options will appear. doesnt exactly solve your problem however unless you have the ZIP file to install, which is what I'm looking for.
Click to expand...
Click to collapse
i root my blu advance 4.0l a010u with the kingoroot PC apk, but i got some issues with the lock screen and some apps, so, i need some advice..
i was looking for a zip to use it via recovery but i can't find any..
Recover IMEI
srspinho said:
Hi guys !
Thank you very much for the Advance 4.0L Roms.
I have successfuly recovered my phone, but the IMEI got lost.
So, I need to root it in order to recover the IMEI, but I just can´t get success on any method :
Kingroot
Framaroot
Towelroot
is there another way to root it ?
Thank you very much.
Click to expand...
Click to collapse
You dont need root to recover imei all you have to do is type *#*#84666364#*#* in your dialer and you will be entered in EngineerMode then go into connectivity ,CDS information and radio information phone 1 or 2 then you will see AT+ type something eg.A then backspace and select the first thing you see. Put a space after AT+ and then put you imei code here "IMEI" between these "" You can find your imei by removing your battery it willl be there. After sending command reboot and imei is back.
links are down....check this instead
Hey guys, links here seems to be down .
Maybe this link would be useful for you all... stock firmware can be downloaded and useful help on videos is available too... Enjoy

Root + twrp + bootloader unlock + twrp flashable stock rom - marhsmallow

If you are on Lollipop, this guide is NOT for you!
Almost none of this is my work, I just collect it and put it together in one place and I'm writing a small how-to get things done.
PLEASE ONLY PROCEED AT YOUR OWN RISK!!!!!!!!!
ONLY FOR ZX551ML
Bootloader unlock:
Currently the only way I was able to get ROOT on the phone was by installing it from TWRP which required an unlocked bootloader, so the first step is to get the bootloader unlocked, to do this please follow this steps:
1) Enable USB debugging - If you do not know what is that and how to do it, you should probably STOP right here.
2) Download and extract: Unlock 6_ZX551ML.ZIP
3) From the extracted folder run unlock.bat (This will restart your phone into fastboot mode, downgrade the bootloader and unlock it)
4) When step 3 is completed, you need to run restore.bat
If everything went on correctly your boot screen should be inverted (white background, black Asus text). This was the most risky part. I only have my phone and it worked, but if something goes wrong here you might end up bricking your phone, so please take extreme care, always read the messages on the screen!!!!!
Custom Recovery:
1) Now to get a custom recovery, please download TWRP-3.0.2-M1-Z00A.img.
2) Put your phone into bootloader mode, if your phone is currently in use, just use the following commands:
Code:
adb reboot bootloader
Alternatively you can power off the phone, remove the USB cable. Power it back on while holding the volume up button.
3) once your phone if in bootloader mode please use the following command:
Code:
fastboot flash recovery TWRP-3.0.2-M1-Z00A.img
4) Use the vol up & down to select "RECOVERY"
5) Use the power button (short press) to reboot to TWRP
ROOTING
1) Download BETA-SuperSU-v2.74-2-20160519174328-patch-by-shakalaca-for-zenfone2-6.0_(1).zip
2) In recovery select Advanced -> Sideload
3) From your computer use the following commands:
Code:
adb sideload "BETA-SuperSU-v2.74-2-20160519174328-patch-by-shakalaca-for-zenfone2-6.0_(1).zip"
4) Once it's completed installing, restart the phone to system
FLASHABLE STOCK ROM
If you have TWRP installed and you want to flash the latest stock ROM, you will need to, make sure you un-root your phone from the supersu app, reboot to recovery and sideload the zip. You can also copy the zip to your phone and install it from twrp. When installing the stock rom, your bootloader will be locked again, so you will need to unlock it (if you wish), also you will need to root again, because the root is lost. However the modified stock rom will NOT remove the custom recovery giving you freedom to flash whatever you like in the future...
XPOSED
Xposed on our device won't work if we have SuperSu installed. If you want to use Xposed modules you will need to use PHH's SuperUser instead. All files required for Xposed/Magisk/Phh's SuperUser are available in the Xposed folder.
Available modified stock rom versions:
UL-Z00A-WW-4.21.40.141-user-TWRP.zip - Updated: 2016-Oct-07
UL-Z00A-WW-4.21.40.197-user-TWRP.zip - Updated: 2016-Dec-16
Files can be downloaded from: here
Again, please proceed on your own risk.
Special tanks and credits to all the guys who made this possible, namely:
@sorg @social-design-concepts @shakalaca - For bootloader unlock
@jrior001 for the TWRP
@shakalaca - For the modified SuperSU package.
Magisk / systemless should also work?
any way to get back the noninverted Bootscreen?
Tr4sHCr4fT said:
Magisk / systemless should also work?
any way to get back the noninverted Bootscreen?
Click to expand...
Click to collapse
Yes I'm using Magisk, but even with it I wasn't able to use Google Pay. To get back to non inverted, you will need to flash the locked bootloader.
Emil Borconi said:
Yes I'm using Magisk, but even with it I wasn't able to use Google Pay. To get back to non inverted, you will need to flash the locked bootloader.
Click to expand...
Click to collapse
While essentially true the user can always use a different boot animation by flashing one via twrp. There might even be one somewhere of the unmodified asus screen.
Can anyone confirm the flashable Rom mentioned in Post #1 is MM 6.0.1? I ask because my phone upgraded itself right after I booted it up and I wondered if it was on a newer version than the downloadable one. Pretty sure the update was only security updates given it was only around 80mb.
The actuall boot screen is only a couple of seconds long while the boot animation shown
---------- Post added at 10:00 PM ---------- Previous post was at 09:02 PM ----------
Well as usual the linux users drew the short straw. The shell script is for mac users. I decided to see about running the lines manually but never even reached the "danger zone". As soon as I did an "adb reboot bootloader" I followed up with "sudo fastboot devices" (some linux distro's need sudo..some don't)....and nothing shows up although I can clearly see the device is hooked up and in fastboot mode as well as the fact the adb reboot bootloader worked. I swap out one of my other devices and check things...they show up fine in fastboot....ok...so what's missing from this picture?
*update* solved by updating the ubuntu adb and fastboot binaries from here: https://github.com/simmac/minimal_adb_fastboot/tree/master/linux
*update2* bootloader unlocked, supersu flashed and verified. Much appreciated.
I ran the bootloader unlock and it appeared to work. Now it keeps booting back into the bootloader. I can't seem to get it to boot normal. Suggestions?
Nevermind, I didn't realize that I needed to run restore.bat while still in the bootloader. It is booting now! I was able to follow your guide and it is now rooted.
Regarding the marshmallow zip you include. I have a couple questions.
- For the modified stock version that will keep the recovery do I just need to flash it from recovery?
- Do I need to unroot before flashing this modified stock marshmallow?
Thanks!
slgooding said:
I ran the bootloader unlock and it appeared to work. Now it keeps booting back into the bootloader. I can't seem to get it to boot normal. Suggestions?
Nevermind, I didn't realize that I needed to run restore.bat while still in the bootloader. It is booting now! I was able to follow your guide and it is now rooted.
Regarding the marshmallow zip you include. I have a couple questions.
- For the modified stock version that will keep the recovery do I just need to flash it from recovery?
- Do I need to unroot before flashing this modified stock marshmallow?
Thanks!
Click to expand...
Click to collapse
Happy to read you got it booting, by the time I got to answer you seemed to git it figured out.
Regarding the zip, yes flash from recovery and you don't need to unroot before, but you will need to root after flashing.
However I do suggest you make a backup before flashing jsut in case....
Emil Borconi said:
Happy to read you got it booting, by the time I got to answer you seemed to git it figured out.
Regarding the zip, yes flash from recovery and you don't need to unroot before, but you will need to root after flashing.
However I do suggest you make a backup before flashing jsut in case....
Click to expand...
Click to collapse
I'm assuming the file is just for folks who are on lollipop who want to upgrade? Didn't see any need to flash it since already on 6.0.1 and have it rooted...unless I'm missing something again.
I read this after I went to 6.0.1 from Asus's manual download and update process. I can't get ADB to connect in the OS (developer mode never displays, even though it tells me I'm a developer after doing kernel ver. button process). I tried to get adb devices -l in fastboot and recovery, and it wont discover it. I've tried multiple windows drivers (including the one that worked when I flashed the firmware the first time) to no avail. Any ideas?
Irishman2020 said:
I read this after I went to 6.0.1 from Asus's manual download and update process. I can't get ADB to connect in the OS (developer mode never displays, even though it tells me I'm a developer after doing kernel ver. button process). I tried to get adb devices -l in fastboot and recovery, and it wont discover it. I've tried multiple windows drivers (including the one that worked when I flashed the firmware the first time) to no avail. Any ideas?
Click to expand...
Click to collapse
If windows doesn't see the phone when in recovery there is something wrong, this can be:
1) Wrong driver
2) Damaged USB cable
3) Damaged USB port.
When you are in recovery you should see the phone with adbm if you are in fastboot you should see the phone with:
Code:
fastboot devices
If nothing works you have the nuclear option.
Manually download the original firmware from Asus website: https://www.asus.com/support/Download/39/1/0/26/BXbNqJplzZiLmk6G/32/
copy the zip to an Sd card.
1) Now Turn Off your phone and boot into recovery mode by pressing Power+Volume UP.
2) Now in recovery mode choose to apply update from sdcard.
3) Now select the zip file.
4) Now wait until the process complete and then Reboot the phone.
5) Done!
famewolf said:
I'm assuming the file is just for folks who are on lollipop who want to upgrade? Didn't see any need to flash it since already on 6.0.1 and have it rooted...unless I'm missing something again.
Click to expand...
Click to collapse
More or less true, but somehow I was on a 6.0.1 version which is now gone from the firmware list of Zenfone, meaning I have updated from 6.0.1 to 6.0.1
Again now I see there is a new firmware released yesterday if I have the time I will patch that system image as well so it can be upgraded with TWRP.
famewolf said:
I'm assuming the file is just for folks who are on lollipop who want to upgrade? Didn't see any need to flash it since already on 6.0.1 and have it rooted...unless I'm missing something again.
Click to expand...
Click to collapse
Just for you I've just uploaded the 4.21.40.197 release as well... so now there is a point of the TWRP rom's
Emil Borconi said:
Just for you I've just uploaded the 4.21.40.197 release as well... so now there is a point of the TWRP rom's
Click to expand...
Click to collapse
Typical....now you've given me work I need to do on the phone. ;P
Appreciate your work!
Out of curiosity have you tried xposed?
famewolf said:
Typical....now you've given me work I need to do on the phone. ;P
Appreciate your work!
Out of curiosity have you tried xposed?
Click to expand...
Click to collapse
Yes and it works. I tried a few modules, but generally speaking I'm not a big xposed user myself. Nify doesn't work to well because of all the asus software on it and I wasn't able to get google assistant either. Android audo mod worked perfectly, so yeah generally speaking xposed work's
Emil Borconi said:
Yes and it works. I tried a few modules, but generally speaking I'm not a big xposed user myself. Nify doesn't work to well because of all the asus software on it and I wasn't able to get google assistant either. Android audo mod worked perfectly, so yeah generally speaking xposed work's
Click to expand...
Click to collapse
Thanks...that answers all my questions except for figuring out what's safe to disable. I put a post in q&a but no replies..the zoom appears to have a very small group on xda. I'll figure it out eventually.
famewolf said:
Thanks...that answers all my questions except for figuring out what's safe to disable. I put a post in q&a but no replies..the zoom appears to have a very small group on xda. I'll figure it out eventually.
Click to expand...
Click to collapse
Actually most if them can be. Here is a print screen of the ones I have disabled on my phone hover I have a zenpad z380c which I use as my car dashboard and on that one o have disabled almost of all of the apps, except zenhome, audio manager and the file manager.
Yes I was surprised to find out that there is almost no zoom community.
Emil Borconi said:
Actually most if them can be. Here is a print screen of the ones I have disabled on my phone hover I have a zenpad z380c which I use as my car dashboard and on that one o have disabled almost of all of the apps, except zenhome, audio manager and the file manager.
Yes I was surprised to find out that there is almost no zoom community.
Click to expand...
Click to collapse
I'm actually enjoying mobile managers auto startup managing...it's done a good job of keeping 10000 things from running at startup that don't need to although "Startup Manager" would do a similar job for free. I'm liking the zenui launcher and calling screen so don't want to break anything related to that...the phone's been performing exceptionally well for days on end with no required reboots. Been very impressed. Previously been fighting with a T-mobile V10 and an Alcatel Idol 3...the v10 had spontaneous reboots...the idol had a stock rom with a bunch of lag in it....tiny to nothing development on both of those.
What about Zentalk, ZenChoice, PhotoCollage, MyAsus Service center, Clean Master, Audiowizard and Bug Reporter?
famewolf said:
I'm actually enjoying mobile managers auto startup managing...it's done a good job of keeping 10000 things from running at startup that don't need to although "Startup Manager" would do a similar job for free. I'm liking the zenui launcher and calling screen so don't want to break anything related to that...the phone's been performing exceptionally well for days on end with no required reboots. Been very impressed. Previously been fighting with a T-mobile V10 and an Alcatel Idol 3...the v10 had spontaneous reboots...the idol had a stock rom with a bunch of lag in it....tiny to nothing development on both of those.
Click to expand...
Click to collapse
I use tasker for that, but yes I agree as a whole is not bad, this is my 4rd Asus product (Zenfone 4, Zenfone 2, Zoom and Zenpad) and overall I'm quite impressed with how they perform, just the support from Asus isn't really the top of the cream... they released MM when other were releasing N... so yeah a bit of sour taste, otherwise happy. And the camera, I think it's brilliant, not the best on the market, but the optical zoom is cool, as well as the camera app which allows you to do some nice manual shooting.
Emil Borconi said:
I use tasker for that, but yes I agree as a whole is not bad, this is my 4rd Asus product (Zenfone 4, Zenfone 2, Zoom and Zenpad) and overall I'm quite impressed with how they perform, just the support from Asus isn't really the top of the cream... they released MM when other were releasing N... so yeah a bit of sour taste, otherwise happy. And the camera, I think it's brilliant, not the best on the market, but the optical zoom is cool, as well as the camera app which allows you to do some nice manual shooting.
Click to expand...
Click to collapse
I listed a few apps in my previous post I wondered if you had looked at..it was a last minute addition so you may have missed it. I own tasker...I'm unaware of using it to stop tasks from running at bootup although I have used it to MAKE some apps run after "Boot Completed".
famewolf said:
I listed a few apps in my previous post I wondered if you had looked at..it was a last minute addition so you may have missed it. I own tasker...I'm unaware of using it to stop tasks from running at bootup although I have used it to MAKE some apps run after "Boot Completed".
Click to expand...
Click to collapse
Generally tasker can be used for almost anything.... but I'm doing most of the thing with root+shell scripts, but yes nothing wrong with the app provided by Asus. I think everybody uses the setup/software he/she is most comfortable using... and there is no right or wrong.... that's until you are NOT and iCrap user, because that is the ultimate WRONG! )
Emil Borconi said:
Generally tasker can be used for almost anything.... but I'm doing most of the thing with root+shell scripts, but yes nothing wrong with the app provided by Asus. I think everybody uses the setup/software he/she is most comfortable using... and there is no right or wrong.... that's until you are NOT and iCrap user, because that is the ultimate WRONG! )
Click to expand...
Click to collapse
Well from the lack of posts it appears you and I ARE the zenfone zoom community. Any idea where the system updates get stored after downloading? I thought in /cache based on regular zenfone posts but was unable to see it. I've got one available but it has to be modified for twrp compatibility as well as unrooting temporarily.

is there any way to root without twrp?

Yes, it's me again. Yes, I have written about this already. Yes, still the same problem.
So, as some of you may know, I have a huge problem with flashing TWRP. No matter how hard I try, no matter what my pc OS is, I get this problem every time, when I try to move from official MIUI to any other ROM.
At this time I'm using Ubuntu 18.04 LTS, but it gets to the same point as on Windows. I reboot to bootloader via ADB, my device is on fastboot devices list, and when I enter 'fastboot flash recovery twrp.img' or 'sudo fastboot flash recovery twrp.img' - nothing happenes. Terminal is like frozen, there is no information what's going on (no sending recovery). When I had Windows, I used to reset (to be clear - format) my PC, and then it worked for some time. Theoritically I could do the same with Ubuntu, but hey guys, I think we can all agree that it shouldn't work like that, should it? Right now, the only way for me is to root my phone first, then it would be easy. But guess what! Root requiers TWRP, TWRP requiers root. Annoying LOOP.
I'd be really thankfull if someone answered this thread, even wrong, trying is what counts, right?
Download TWRP app and try flashing using the app. Never tested it. Your best bet run window simulator on PC or go library or use someone's computer. Takes like 1 min to root. I have bricked my phone million times already, piece of cake to bring it back to life.
Asheque said:
Download TWRP app and try flashing using the app. Never tested it. Your best bet run window simulator on PC or go library or use someone's computer. Takes like 1 min to root. I have bricked my phone million times already, piece of cake to bring it back to life.
Click to expand...
Click to collapse
To flash TWRP via app I need root. And I see no way to root my phone. But the windows emulator sounds like a good idea Gonna try that. And I have tried on my brothers computer one day, didnt work
Hilus said:
To flash TWRP via app I need root. And I see no way to root my phone. But the windows emulator sounds like a good idea Gonna try that. And I have tried on my brothers computer one day, didnt work
Click to expand...
Click to collapse
Go on your brothers computer, download TeamViewer. Message me and I can do it for you.
Asheque said:
Go on your brothers computer, download TeamViewer. Message me and I can do it for you.
Click to expand...
Click to collapse
Right now I am making a bootable windows, to see if this works. If it fails I'll text you
Hilus said:
Right now I am making a bootable windows, to see if this works. If it fails I'll text you
Click to expand...
Click to collapse
Sounds good. Very easy once you have it setup. Keep in mind you have to reinstall TWRP and root every time you update MiUi OS. For me the global update is like every Friday so I have to reinstall TWRP and Root every week.
Asheque said:
Sounds good. Very easy once you have it setup. Keep in mind you have to reinstall TWRP and root every time you update MiUi OS. For me the global update is like every Friday so I have to reinstall TWRP and Root every week.
Click to expand...
Click to collapse
After some time, I gave up. Last hope was to try one more time on my brother's PC, and luckly - it worked. Everything ended good for me, but I still don't get it why sometimes my PC decides to go along and work with me and sometimes it just doesn't care. I am aware that flashing official MIUI wipes custom recovery, that's why I usually don't come back to it from any other custom ROM. Anyway, I'm really thankful for your help Asheque, thanks for all advices, and I think one day I will come back exactly to this thread and read them again. Appreciate it!
Hilus said:
After some time, I gave up. Last hope was to try one more time on my brother's PC, and luckly - it worked. Everything ended good for me, but I still don't get it why sometimes my PC decides to go along and work with me and sometimes it just doesn't care. I am aware that flashing official MIUI wipes custom recovery, that's why I usually don't come back to it from any other custom ROM. Anyway, I'm really thankful for your help Asheque, thanks for all advices, and I think one day I will come back exactly to this thread and read them again. Appreciate it!
Click to expand...
Click to collapse
I am glad it worked out Make sure you install Magisk apk and flash Magisk.zip for root access and pass safetynet if you want to use Google Pay. Also, highly recommend you download GBoard Theme module from Magisk. It's the best, makes Google Keyboard freaking awesom.
Asheque said:
I am glad it worked out Make sure you install Magisk apk and flash Magisk.zip for root access and pass safetynet if you want to use Google Pay. Also, highly recommend you download GBoard Theme module from Magisk. It's the best, makes Google Keyboard freaking awesom.
Click to expand...
Click to collapse
Thanks so much, I'm gonna try it out

Categories

Resources