Related
1st OP
Welcome, fellow Nook users, to the future of the Nook Simple Touch! We present to you: 1337 ROM!
This ROM is made for both the Nook Simple Touch and the Nook Simple Touch with GlowLight using software version 1.2.1.
Features
New kernel, with multitouch and USB host capability
NoRefresh
Status bar and other UI tweaks
Book Button Menu (Configure the book button to open it with Nook Touch Mod Manager)
ReLaunch
Cupcake/Donut Launcher
AndroNook Settings
Google Apps
Rotation Control
Preloaded necessity apps (trying not to say bloatware; you can uninstall them!)
More background tweaks
Installation Instructions
Install Clockworkmod Recovery (to internal memory, not the SD Card) according to this thread.
Download the latest version of the ROM from the Downloads section. THESE ARE NOT FLASHABLE FILES.
Extract the package to an accessible location. You should have three *.zip files.
Copy all three *.zip files to the SD Card or internal memory.
Boot to Clockworkmod by rebooting and holding the bottom left and right buttons at the "Your Nook is Starting Up" screen.
Wipe /system (mounts & storage > format /system > Yes)
Flash the nook_1337rom_xx.zip and reboot.
Follow through normal B&N setup, then boot back into recovery.
Flash Nooter-Part1.zip and reboot back into the OS.
You should be brought to ReLaunch instead of the B&N homescreen.
Open YouTube. Hit Menu -> My channel. At the prompt that appears, tap Add Account.
Sign in with your Google credentials (Gmail and password) and close YouTube.
Open Gmail. Tap menu -> Sync. Gmail will promptly crash (straight to home; no FC or "unfortunate" stop)
Reboot back to CWM again. This time, flash Nooter-Part2.zip.
Reboot again and enjoy!
Upgrade Instructions for coming up from previous versions of the ROM
Download the latest *.zip file and extract it somewhere safe. As a reminder: THIS IS NOT A FLASHABLE FILE
Copy the three contained *.zip files to your SD card.
Reboot into recovery.
Wipe /system (mounts & storage > format /system > Yes)
Flash all three files in this order, without rebooting: nook_1337rom_xx.zip, Nooter-Part1.zip, then Nooter-Part2.zip.
Reboot.
Note - Be sure to check out the 2nd OP for the changelog, planned features, FAQ, and more.
XDA:DevDB Information
1337 ROM, ROM for the Barnes & Noble Nook Touch
Contributors
yattaro, ИΘΘK¡€, javelinanddart
ROM OS Version: 2.3.x Gingerbread
ROM Firmware Required: B&N OS 1.2.1
Based On: Stock
Version Information
Status: Beta
Current Beta Version: 1.3.4
Beta Release Date: 2015-04-09
Created 2014-11-07
Last Updated 2015-04-11
[NST/NSTG][ROM] 1337 ROM [Nov. 6]
2nd OP
Changelog
• Version 1.0 - Alpha (unreleased)
• Version 1.1 - Testing (unreleased)
• Version 1.2 Beta - initial release (see above for details)
• Version 1.3 Beta - added AndroNook Settings, Cupcake/Donut Launcher; removed Fastmode; updated ReLaunch for fixed root permissions (Apr. 7)
• Version 1.3.1 Beta - added USB host and multitouch (Apr. 8)
• Version 1.3.2 Beta - fixed USB host and multitouch with new kernel (Apr. 8)
• Version 1.3.3 Beta - added NoRefresh (Apr. 8)
• Version 1.3.4 Beta - (current) fixed a couple minor bugs (Apr. 9)
To Do
• ADB support (near future!)
• Multitouch support
• USB host mode support
• init.d support
• Support for 2.3 Gingerbread and beyond
• Upload screenshots
Addons/Modifications
• Coming soon - orientation switch via status bar button
FAQ
Q: "What home launcher does this ROM use?" - @DrNO[PL]
A: It uses the ReLaunch launcher.
Q: "Where are the downloadable files?" - @kwyrt
A: Since this thread is a DevDB project, the downloads are in a separate page, which is accessible through a link in the ribbon above the OP.
Q: "Does this project use Android 2.3?" - @dorfd1
A: No, it doesn't - the only reason the 1st OP says it does is because 2.3.x is the lowest Android version allowed in the DevDB system. This ROM uses Android 2.1.
Q: "Will multiple languages be added to this ROM?" - @DrNO[PL]
A: No, they won't, because, believe it or not, it's already a stock feature - you just need root to access it! Here's how:
1. Install the app Termimal Emulator from the Market.
2. Open it, and enter the command
Code:
su
The line should now have a "#" on the far left.
3. Enter the command
Code:
am start -n com.android.settings/.DevelopmentSettings
...which launches a hidden settings menu.
4. Tap "Locale Picker[English (United States)]".
5. Choose your language, and enjoy!
Q: "Is this ROM rooted?" - @youxiaojie
A: Yes, it is.
Q: "Are you guys working on an updated ROM that uses 2.3?" - @frap129
A: No, because as of now nobody has been able to update the Android version on the Nook Touch device. 2.1 is the version we are developing for. UPDATE - It's looking like Gingerbread and beyond may be possible for the NST, so the new answer to your question is YES.
Can you post some screenshots?
Which homeapp is used? I'm asking as the one in [NST/NSTG][ROM] Tweaked Modded ROM [Feb16] is restarting / falling into refresh loop with some of my books, which is a bit annoying
DrNO[PL] said:
Can you post some screenshots?
Which homeapp is used? I'm asking as the one in [NST/NSTG][ROM] Tweaked Modded ROM [Feb16] is restarting / falling into refresh loop with some of my books, which is a bit annoying
Click to expand...
Click to collapse
It uses ReLaunch. Give me about an hour and I can throw together some screenies.
Edit: they're up now! Sorry for the delay. Check up top.
yattaro said:
Download the latest nook_1337rom_xx.zip, Nooter-Part1.zip, and Nooter-Part2.zip (not to be confused with the ones for pinguy1989's ROM) from the links above..
Click to expand...
Click to collapse
Would love to try this out but I'm not seeing the links for the 1337rom, nooter-part1, and nooter-part2. Am I missing something?
kwyrt said:
Would love to try this out but I'm not seeing the links for the 1337rom, nooter-part1, and nooter-part2. Am I missing something?
Click to expand...
Click to collapse
It's a DevDB project. Look above the OP.
yattaro said:
It's a DevDB project. Look above the OP.
Click to expand...
Click to collapse
Gotcha. Had not seen that before. Thanks!
Thanks, I will test it tonight
DrNO[PL] said:
Thanks, I will test it tonight
Click to expand...
Click to collapse
Let us know how/if you like it - and also be sure to report any bugs you find using the DevDB Bug Reports feature, and leave a review using the DevDB Reviews feature!
Is this android 2.3?
Sent from my GT-P3110 using Tapatalk
dorfd1 said:
Is this android 2.3?
Sent from my GT-P3110 using Tapatalk
Click to expand...
Click to collapse
No, it's not - the DevDB options just don't allow any Android version below 2.3.x. It's really Android 2.1, just like every other Nook thing.
Sorry about that.
thenookieforlife3 said:
Let us know how/if you like it - and also be sure to report any bugs you find using the DevDB Bug Reports feature, and leave a review using the DevDB Reviews feature!
Click to expand...
Click to collapse
Just flashed and already like it from the start. New, nice pre-boot and shutdown screens and boot animation. Home is just what I searched for. Let me test it for a day or two. I'll let you know about ups and downs, pros and cons... Review comes afterwards
1st question, is there a way to make app drawer to just display icons in 4 columns (with labels or not) instead of 2-column short-list?
2nd are you going to include additional languages similar to HERE?
DrNO[PL] said:
Just flashed and already like it from the start. New, nice pre-boot and shutdown screens and boot animation. Home is just what I searched for. Let me test it for a day or two. I'll let you know about ups and downs, pros and cons... Review comes afterwards
1st question, is there a way to make app drawer to just display icons in 4 columns (with labels or not) instead of 2-column short-list?
2nd are you going to include additional languages similar to HERE?
Click to expand...
Click to collapse
Glad you're enjoying the ROM!
Answer to 1st question - I bet there is, but I don't know for sure - try messing around with the ReLaunch settings a bit.
Answer to 2nd question - No, we aren't, because, believe it or not, it's already a stock feature - you just need root to access it! Here's how:
1. Install the app Termimal Emulator from the Market.
2. Open it, and enter the command
Code:
su
The line should now have a "#" on the far left.
3. Enter the command
Code:
am start -n com.android.settings/.DevelopmentSettings
...which launches a hidden settings menu.
4. Tap "Locale Picker[English (United States)]".
5. Choose your language, and enjoy!
1. I'll try searching
2. nope... there's no Polish :/ only mainstream ones that can be chosen also from normal nook Settings
DrNO[PL] said:
Nope... there's no Polish :/ only mainstream ones that can be chosen also from normal nook Settings
Click to expand...
Click to collapse
Hmm. Well, I don't think we're planning on adding that, but I'll talk to @yattaro and see what he says.
thenookieforlife3 said:
Hmm. Well, I don't think we're planning on adding that, but I'll talk to @yattaro and see what he says.
Click to expand...
Click to collapse
Would be nice, but that's not a show stopper.
Rom still did not crash, launcher resterted only once, but it can be my fault. Works smooth and fast. Good job!
Yet I have not opened even one book :silly: lol
In the mean time I've added some, in my opinion, bugs.
I'm going to die now... See you tomorrow
DrNO[PL] said:
Would be nice, but that's not a show stopper.
Rom still did not crash, launcher resterted only once, but it can be my fault. Works smooth and fast. Good job!
Yet I have not opened even one book :silly: lol
In the mean time I've added some, in my opinion, bugs.
I'm going to die now... See you tomorrow
Click to expand...
Click to collapse
I might look into swapping the settings.apk and merging the functionality in framework-res.apk in that mod you posted. You might be able to flash that mod straight over this, but you'll lose a lot of the theming that @thenookieforlife3 originally added, notably the status bar.
does it be rooted , support init.d and app2sd?
yattaro said:
1st OP
Welcome, fellow Nook users, to the future of the Nook Simple Touch! We present to you: 1337 ROM!
Features
OC Kernel with FastMode
Status bar tweaks
Book Button Menu (Configure the book button to open it with Nook Touch Mod Manager)
ReLaunch
Google Apps
Rotation Control
Preloaded necessity apps (trying not to say bloatware; you can uninstall them!)
More background tweaks
Installation Instructions
Install Clockworkmod Recovery (to internal memory, not the SD Card) according to this thread.
Download the latest nook_1337rom_xx.zip, Nooter-Part1.zip, and Nooter-Part2.zip (not to be confused with the ones for pinguy1989's ROM) from the links above.
Copy all three *.zip files to the SD Card or internal memory.
Boot to Clockworkmod by rebooting and holding the bottom left and right buttons at the "Your Nook is Starting Up" screen.
Flash the nook_1337rom_xx.zip and reboot.
Follow through normal B&N setup, then boot back into recovery.
Flash Nooter-Part1.zip and reboot back into the OS.
You should be brought to ReLaunch instead of the B&N homescreen.
Open YouTube. Hit Menu -> My channel. At the prompt that appears, tap Add Account.
Sign in with your Google credentials (Gmail and password) and close YouTube.
Open Gmail. Tap menu -> Sync. Gmail will promptly crash.
Reboot back to CWM again. This time, flash Nooter-Part2.zip.
Reboot again and enjoy!
Note - Don't forget to thank both of the OPs, not just this first one!
XDA:DevDB Information
1337 ROM, ROM for the Barnes & Noble Nook Touch
Contributors
yattaro, thenookieforlife3
ROM OS Version: 2.3.x Gingerbread
ROM Firmware Required: B&N OS 1.2.1
Based On: Stock
Version Information
Status: Beta
Current Beta Version: 1.2
Beta Release Date: 2014-11-06
Created 2014-11-07
Last Updated 2014-11-12
Click to expand...
Click to collapse
does it be rooted , support init.d and app2sd?
youxiaojie said:
does it be rooted , support init.d and app2sd?
Click to expand...
Click to collapse
It is rooted.
It does not support init.d yet, but we're working on it.
If App2SD works on any other regular rooted Nook, it works just fine for this ROM, too.
By the way, next time, please don't quote the OP, and save all of us from ESD (Excessive Scrolling Disorder). Also, please edit your post and delete the [quote][/quote] tags and everything in between them.
thenookieforlife3 said:
It is rooted.
It does not support init.d yet, but we're working on it.
If App2SD works on any other regular rooted Nook, it works just fine for this ROM, too.
By the way, next time, please don't quote the OP, and save all of us from ESD (Excessive Scrolling Disorder). Also, please edit your post and delete the (quote][/quote] tags and everything in between them.
Click to expand...
Click to collapse
Are you guys working on compiling an updated ROM? I noticed all the changed files are included in the source other than the device tree, so I may try compiling 2.3, and if that works, higher.
Rom updated on May 19. This is LP 5.1 release 2. Latest Google/CM/Resurrection sources + all hardened features. Plus cleaned IP addresses (got rid of Google, Level 3 communication, AT&T, Orange, Department of Defense and other shady ips). Also enabled is Volte (enhanced LTE), which is Voice over LTE. This depends on the service provided by your carrier. In the States, for example, T-Mobile provides such services, which include high definition voice. Usually, you need special update done by the manufacturer in conjunction with your carrier. This rom does not need that. Your Z1 is already provisioned for Volte. You will see in Mobile Settings another entry: Enhanced 4g LTE Mode. ALso, in test menu/phone (*#*#4636#*#*), you will see a Volte Provisioned Flag. So, as soon as your carrier starts Volte, you are all set.
Sources are the same...
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12531
_____________________________________________________________________________________
Rom updated to latest sources on May 4. In addition to regular hardened features, more than 40 instances of Google IP, Level 3 Communication and Department of Defense IPs removed from sources both for IPV4 and IPV6. The same is replaced with Opendns IP. Keep in mind that those ips go not only in configuration files, but libs also and the latter cannot be decompiled and fixed...
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=12289
______________________________________________________________________________________
Rom Updated to LP 5.1.1. All hardened/security features implemented. Kernel used from Slimroms 5.1.
TWRP 2.8.6 is integrated in kernel.
Obviously, this is an alpha version...
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12110
Kernel Source: https://github.com/AOSP-Argon/kernel_sony_msm8974/tree/lp5.1
___________________________________________________________________________________________________
Rom updated to 5.1: all hardened features enabled.
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=11901
___________________________________________________________________________________________________
March 31: kernel updated to include screen color calibration:
See Download link: http://forum.xda-developers.com/showpost.php?p=59801528&postcount=94
_________________________________________________________________________________________________
March 27: New build is up, latest CM and Resurect changes; kernel includes voltage table, syncookie and TWRP.
Download Link: http://d-h.st/lw2s
Mirror Link: http://forum.xda-developers.com/devdb/project/dl/?id=11744
_________________________________________________________________________________
March 15: New build is up including latest sources, TWRP integrated in kernel, led lights fixed
DOWNLOAD LINK: http://d-h.st/UO7W
_______________________________________________________________________________________________
Marchh 7: Rom Updated to the latest version + plus all security enhancements. Sources for security changes are the same as posted
See Download section for update
Here is Resurection Remixed Lollipop hardened and secure. Built from sources on February 24.
Changes:
First of all, as many know, encryption on lollipop slows down the device to almost unusable. I was able to resolve that. The culprit was Qualcom crypto module and drivers that collide with graphics. In this rom, when you encrypt your device, there is no noticeable slow down at all. Your master encryption key is no longer stored in crypto module (which rumor has it is backdoored anyway), but rather hashed and salted on the drive itself.
1. Modified kernel to disable creepy SElinux and enable Tomoyo security. Now you can safely use Xposed framework and some modules such as Xprivacy, Appsettings and ShowDialpad, as well as many others
2. Modified kernel to disable qualcom module and drivers
3. Disabled creepy qualcom random number generation and enabled all other methods
4. Enabled 256 bit AES drive encryption as opposed to Google's default 128 bit
5. Enabled all ciphers and hashes available in kernel and disabled by default (thanks Sony and Google)
6. Latest CM changes
7. Omniswitch (to be flashed separately after flashing the rom)
Maybe more
INSTALL:
1. Be on Kitkat, rooted with CWM or TWRP
2. Enter Recovery, wipe System, Data, Cache
3. Flash the rom
4. Flash Omniswitch
5. Reboot and enjoy
If you want to encrypt your device, you need to do 2 additional steps before or after encryption. Go to Developer Options and enable "Force GPU rendering" and "Disable HW overlays. Yes, you have to enable (not disable) "Disable HW overlays" option. The latter won't stick after reboot. So, manually transfer the attached init.d script to /system/etc/init.d and set permissions to at least 744. This way the option will be set at boot and you won't have any noticeable slowdown. In fact, I don't see any difference in speed between encrypted and non encrypted device.
CREDIT: Resurection-Remix Team, Cyanogenmod, AOSP and Omniroms
WARNING:
I am not responsible if your device explodes and kills everyone around. You are doing it on your own. Russians, who are definitely coming, won't help you either :laugh:
Download links
Rom: http://d-h.st/l1rB For Update see Download Section
Omniswitch: http://d-h.st/AbGH
Init.d script (in case you want to encrypt your data): http://d-h.st/QIiE
Sources: https://github.com/ResurrectionRemix
https://github.com/HonamiZ1/android_system_vold
https://github.com/HonamiZ1/kernel_sony_msm8974
XDA:DevDB Information
Resurection-Remixed Lollipop 5.1.1 Hardened, ROM for the Sony Xperia Z1
Contributors
optimumpro
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP, Cyanogenmod
Version Information
Status: Testing
Created 2015-02-25
Last Updated 2015-05-19
screenshots
Screenshots added
Kernel updated with CPU voltage table
Kernel updated to allow under/over volting. See attachment.
Instructions:
1. Unzip the file
2. Flash in fastboot: fastboot flash boot boot.img and fastboot reboot
Enjoy
Thanks for this ROM, are there any known bugs?
wis3m0nkey said:
Thanks for this ROM, are there any known bugs?
Click to expand...
Click to collapse
All CM bugs as of February 24. You can go on their site and see the list of changes...
optimumpro said:
All CM bugs as of February 24. You can go on their site and see the list of changes...
Click to expand...
Click to collapse
So just need to look at http://forum.xda-developers.com/xperia-z1/general/rom-official-cyanogenmod-12-nightlies-t3007118 is that right?
Sorry I have to confirm, there are multiple threads (Official/Development) for CM12.
This ROM will maintain root and recovery, right?
I'll flash and let you know if I find any other issues.
Tried it. Works great. Some strange problem with mms though. Could not load them even though data works perfectly. Battery life looks great. Didn't try calling so i can't say anything about the mic.
Kyrius said:
Tried it. Works great. Some strange problem with mms though. Could not load them even though data works perfectly. Battery life looks great. Didn't try calling so i can't say anything about the mic.
Click to expand...
Click to collapse
I use Textsecure as sms replacement. Microphone works great...
Very buggy
you should definately fix this rom as i cannot start camera it fc. it restart itseft
NOT STABLE
darkdevu said:
you should definately fix this rom as i cannot start camera it fc. it restart itseft
NOT STABLE
Click to expand...
Click to collapse
1. Learn the rule about not posting bug reports without logcat
2. Camera works fine: verified
3. Always wipe System/Data/Cache before flashing
4. Are you sure you have Xperia Z1?
Cheers
his profile says Z3. lol
Any further reports on this ROM? Interesting to know how it performs and about stability
Deleted
wis3m0nkey said:
Thanks for this ROM, are there any known bugs?
Click to expand...
Click to collapse
Rom Updated to the latest version. See Download section in the OP.
and where is the link to the update?
shikimafia said:
and where is the link to the update?
Click to expand...
Click to collapse
It is in Download section:
http://forum.xda-developers.com/devdb/project/?id=8412#downloads
Screenshots added in post #2. Note that only this rom and SlimLP work with the latest Xpivacy module. Tried on Crdroid and others and there is bootloop as soon as you enable Xprivacy.
Has no one tried this rom as not reports or posts
tried flashing update from scratch and get play services fc on every gapps i used............i am guessing i may have to flash initial release and dirty flash this over it? excuse me if i may have got it wrong
shingers5 said:
Has no one tried this rom as not reports or posts
Click to expand...
Click to collapse
Well. The first version had 69 downloads. The latest one had 20. Other than the bogus claim about camera foreclosing (by someone who has Xperia Z3) there were no reports of problems. I have been using this rom for about 10 days without any problems...
optimumpro said:
Well. The first version had 69 downloads. The latest one had 20. Other than the bogus claim about camera foreclosing (by someone who has Xperia Z3) there were no reports of problems. I have been using this rom for about 10 days without any problems...
Click to expand...
Click to collapse
I'm having issues flashing the new version as getting play services errors.... Was gonna try dirty flash over previous versions
The Unlegacy-Android ProjectIntroduction
Unlegacy-Android started out as the OMAP4-AOSP Project. It was created in late 2015 in order to maintain a clean and organized place for pure AOSP support for various OMAP4 devices, such as the Galaxy Nexus and the Samsung Galaxy Tab 2 series. Over time this evolved to support more than just these devices, but still maintains its roots of supporting "legacy" devices that no longer receive "official" updates: hence Unlegacy-Android was born.
This organization's goal is not to create feature packed ROMs, but to create a base ROM in such a way that custom ROM developers can easily adapt the changes. We're good at (properly) fixing compatibility issues between newer Android versions and older devices, among other core things. The "bells and whistles" like themes we leave to others.
The first public build here had something exclusive for the Galaxy Nexus, yet unseen on any other OMAP4 device: all RAM carveouts reserved for Ducati (the multimedia subsystem of OMAP4, responsible for hardware-accelerated video decoding, encoding and camera functionality) have been switched over to CMA.
A few words for those who see CMA for the first time:
The Contiguous Memory Allocator (CMA) makes it possible for device drivers to allocate big contiguous chunks of memory after the system has booted.
The main difference from the similar frameworks is the fact that CMA allows to transparently reuse memory region reserved for the big chunk allocation as a system memory, so no memory is wasted when no big chunk is allocated. Once the alloc request is issued, the framework will migrate system pages to create a required big chunk of physically contiguous memory.
Click to expand...
Click to collapse
This means that a total of 996 MB physical memory is available to the system, while keeping Ducati fully working - this is a huge step forward, coming from the 694 MB available in the last factory image released by Google (Android 4.3). This gives the OS access to an additional 300MB of RAM.
While CMA was just recently implemented for this device, thanks to one of our developers (let's just call him Luden), it's quite stable: even under heavy memory pressure, the system manages to free up the required memory in order to start up Ducati and launch the requested multimedia functionality in a few seconds at most.
Installation
For Marshmallow (6.0) and below, It's important that /system needs to be unmounted before installing the ROM - some recoveries tend to leave it mounted after performing operations on it.
If you're planning to install GApps, be sure to read the second post!
Aside from these, installation and upgrading is no different than on other ROMs.
Problems
While we weren't able reproduce any CMA-related problems, hidden ones can still arise. In most cases, these problems will be either lost Ducati functionality (no multimedia capabilities) until rebooting, or a kernel panic (hard reboot) - upon noticing any of these, be sure to grab a logcat/dmesg and/or last_kmsg and send it to us (preferably by attaching it to a post in this thread).
Other than that, these are bugs we're aware of in the current build:
- The RIL on LTE devices (toro, toroplus) isn't fully working; calls and texts should be OK, but expect no data.
- Sound pops can be observed, mostly when using touch sounds (this is being investigated)
- Some exotic video formats or camera modes might not be perfect - if you notice any artifacts or green spots (the issue that happened in the past), report the details in this thread
- Inverted colors mode not working
- Tricky connection to some 5 GHz Wi-Fi networks
- SELinux is in Permissive mode (this isn't a problem for most people, just mentioned it here as extra information)
If you notice anything else, be sure to report it in this thread. While we're kind of busy, we usually read the thread and acknowledge the bug reports, even if I don't reply directly to them.
Downloads
See: http://builds.unlegacy-android.org.
As usual, feedback is appreciated
Want to support development? You can consider donating, we've spent countless of hours with this
XDA:DevDB Information
Unlegacy Android Project, ROM for the Samsung Galaxy Nexus
Contributors
Ziyan, MWisBest, Android-Andi
Source Code: https://github.com/Unlegacy-Android/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Version Information
Status: Stable
Created 2016-03-12
Last Updated 2017-04-07
GApps
If you want to install GApps, we recommend Open GApps Nano or BaNkS GApps.
An important note: as this is a pure AOSP ROM, installing GApps tends to be problematic: in order to try to avoid installation issues, be sure to install GApps immediately after installing the ROM, before booting the system for the first time. After the initial bootup finished, be sure to go into Settings -> Apps, and grant every permission to every Google application - most importantly, Google Play services.
In the case of an upgrade, be sure to re-install the GApps package, as upgrading wipes /system. You shouldn't need to re-set the permissions afterwards.
siealex said:
One more note. DO NOT set up your Google account until you grant all permissions, otherwise you will be stuck on the initial setup.
Click to expand...
Click to collapse
Rooting
You can flash either the latest SuperSU or OpenSource SuperUser to get rooted.
Incredible work! Thank you to ALL the volunteer developers for making this FREE and OPEN SOURCE progress possible! The code is free, but your time is not! Thank you!!!
Out of curiosity, is aosp_mm_tuna_2016-03-12 running DDK1.9 or DDK1.8? I feel like it's 1.9 from your mention of recording artifacts, but I'm not an android developer, so I can't tell.
I'm running this right now, and it's awesome. Marshmallow in general seems to have much better performance than Lollipop on our device. I do miss some custom kernel flags, but I'm sure that'll come with time.
@Ziyan Which recovery do you recommend ?
DRM services not working means also Netflix doesn't work?
PythonNut said:
Out of curiosity, is aosp_mm_tuna_2016-03-12 running DDK1.9 or DDK1.8? I feel like it's 1.9 from your mention of recording artifacts, but I'm not an android developer, so I can't tell.
Click to expand...
Click to collapse
DDK 1.9 of course
Master94ga said:
@Ziyan Which recovery do you recommend ?
Click to expand...
Click to collapse
The latest TWRP should be fine. I might have not mentioned it in the OP, but the ROM supports F2FS as well.
Master94ga said:
DRM services not working means also Netflix doesn't work?
Click to expand...
Click to collapse
Possibly.
Ziyan said:
DDK 1.9 of course
The latest TWRP should be fine. I might have not mentioned it in the OP, but the ROM supports F2FS as well.
Possibly.
Click to expand...
Click to collapse
Thanks, 3.0 unofficial or your last recovery?
You are a god!
I'm downloading and will be testing this, I'm super excited about this work.
EDIT: So, first thing I've noticed is that the phone is struggling with the configuration in the first boot. Either in the "checking connection" or in the "just a sec..." loading frame, it freezes and doesn't get past it. Is it because of google play services?
diogofd8 said:
So, first thing I've noticed is that the phone is struggling with the configuration in the first boot. Either in the "checking connection" or in the "just a sec..." loading frame, it freezes and doesn't get past it. Is it because of google play services?
Click to expand...
Click to collapse
Yes Google Play Services can mess it up - I don't recall how, but I managed to press a skip button or something to easily get past it when it started looping. I guess we should add a mini how-to to the OP about it, as I really don't want to hack the framework for this.
Yep, I'm stuck in "just a sec..."
Edit: I restarted the Phone and now it works.
Netflix works too
Big thanks to @Ziyan and all OMAP4 dev for all your contribution so far ! I'll test this immediately [emoji106]
Sent from my Galaxy Nexus using Tapatalk
Ah, another thing!
When I flash the rom .zip file with all the partitions in f2fs, it auto changes to ext4 and installs. Maybe I'm being noob using TWRP so I'll say what I did here:
1) Full wipe
2) Convert system to f2fs, convert data to f2fs, convert cache to f2fs
3) Adb push rom zip file
4) Flash it
5) Check partition format, it's all on ext4
diogofd8 said:
Ah, another thing!
When I flash the rom .zip file with all the partitions in f2fs, it auto changes to ext4 and installs. Maybe I'm being noob using TWRP so I'll say what I did here:
1) Full wipe
2) Convert system to f2fs, convert data to f2fs, convert cache to f2fs
3) Adb push rom zip file
4) Flash it
5) Check partition format, it's all on ext4
Click to expand...
Click to collapse
There are a couple things going on here. The system ROM is an ext4 image, so it doesn't matter what you format it to, because it'll always become whatever is in the image.
Furthermore, only /data benefits from being F2FS, but it's not you fault for not knowing this because it wasn't mentioned in the documentation!
The other thing is that I don't know of a TWRP build that isn't buggy. When I tried to format to F2FS, it didn't work because my particular version of TWRP had a bug. So maybe your /data format failed for the same reason. I personally do not know what version of TWRP will reliably work for this. But this is a discussion for the TWRP thread.
2) Convert system to f2fs
Click to expand...
Click to collapse
Don't do this! F2FS is not supported on /system.
Wifi is extremely slow.
I can't do anything.
Google Play store can't install apps.
vipelp said:
Wifi is extremely slow.
I can't do anything.
Google Play store can't install apps.
Click to expand...
Click to collapse
Wifi works perfectly fine here ....with 2.4ghz
you using 5ghz or 2.4 ghz ?
I already tried both and it doesn't matter.
Browser times out opening google.com.
Play store doesn't load images and can't download apps
Wifi automatically disconnects....
rohitchouhan07 said:
Wifi works perfectly fine here ....with 2.4ghz
you using 5ghz or 2.4 ghz ?
Click to expand...
Click to collapse
WiFi working fine for me on 5GHz as well.
To other people: when this ROM boots, you may see the Google splash screen, then the screen will go black, and the device will act like it has died. It hasn't. Just give it a minute and the regular Android boot animation will appear.
OK i'm trying a reflash now. Complete wipe.
For me all work correctly, no problem with google play store or wifi
The Unlegacy Android ProjectIntroduction
Unlegacy-Android started out as the OMAP4-AOSP Project. It was created in late 2015 in order to maintain a clean and organized place for pure AOSP support for various OMAP4 devices, such as the Galaxy Nexus and the Samsung Galaxy Tab 2 series. Over time this evolved to support more than just these devices, but still maintains its roots of supporting "legacy" devices that no longer receive "official" updates: hence Unlegacy Android was born. In our opinion, these ROMs are how the official updates would look.
On top of AOSP, we only include changes which are necessary to support the hardware, be secure, and get acceptable performance. Current features for hammerhead include:
BFQ IO scheduler (official kernel 3.4 release), set up so GUI processes have the highest priority
Volume button wakeup (setprop persist.wm.volume_wake_screen 1)
Last upstream (kernel/msm) hammerhead kernel tag merged
Charging LED control (setprop persist.sys.led_on_charger 0)
Enhanced backlight map for lower min brightness
Night display blue light filter (GLES-based)
KCAL & PCC color temperature interfaces
Other security patches & minor bug fixes
F2FS support from K4.4 backports
SELinux in Enforcing mode
Installation
It's important that /system needs to be unmounted before installing the ROM - some recoveries tend to leave it mounted after performing operations on it.
If you're planning to install GApps, be sure to read the second post.
Aside from these, installation and upgrading is no different than on other ROMs.
Problems
No known issues on Nougat builds
See post #3 for Oreo/Pie notes
If you notice anything, be sure to report it in this thread. Stability is our main concern. While it may takes some time, I usually read the thread and acknowledge the bug reports, even if I don't reply directly to them.
Downloads
See: http://builds.unlegacy-android.org. Our automated builds ensure that we always have the latest Android security patches merged in, without having to manually start and upload builds
Also, we'll have a built-in OTA updater (just like stock) soon (it's a work in progress).
Features?
There isn't much to say here - this is AOSP, if you install GApps, you pretty much get the same thing that's running on the Nexus devices (see second post). The aim of this project is to create a fast and stable ROM, as close to AOSP as possible without diminishing usability. Occasionally, small non-AOSP features may be implemented, provided there is a clear need and they make sense on hammerhead.
XDA:DevDB Information
Unlegacy Android Project, ROM for the Google Nexus 5
Contributors
amaces, Ziyan
Source Code: https://github.com/Unlegacy-Android
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.1.2
Stable Release Date: 2017-04-18
Current Beta Version: 9.0.0
Beta Release Date: 2017-10-02
Created 2017-04-21
Last Updated 2018-10-30
GApps
If you want to install GApps, we recommend micro packages on N builds (e.g., Open GApps), and pico otherwise.
An important note: as this is a pure AOSP ROM, installing GApps tends to be problematic: in order to try to avoid installation issues, be sure to install GApps immediately after installing the ROM, before booting the system for the first time. If you experience any issues with the Google applications, be sure to go into Settings -> Apps, and grant every permission to every Google application - most importantly, Google Play services.
In the case of an upgrade, be sure to re-install the GApps package, as upgrading wipes /system. You shouldn't need to re-set the permissions afterwards.
Stock-like setup
Disable the following built-in (AOSP) apps:
- Android keyboard (once you installed Gboard)
- Browser
- Calculator
- Camera
- Clock
- Email
- Gallery
Install the following apps from the Play store:
- Google Photos (https://play.google.com/store/apps/details?id=com.google.android.apps.photos)
- Calculator (https://play.google.com/store/apps/details?id=com.google.android.calculator)
- Chrome (https://play.google.com/store/apps/details?id=com.android.chrome)
- Clock (https://play.google.com/store/apps/details?id=com.google.android.deskclock)
- Gboard (https://play.google.com/store/apps/details?id=com.google.android.inputmethod.latin)
- Gmail (https://play.google.com/store/apps/details?id=com.google.android.gm)
- Google Calendar (https://play.google.com/store/apps/details?id=com.google.android.calendar)
- Google Camera (https://play.google.com/store/apps/details?id=com.google.android.GoogleCamera)
- Google Now Launcher (https://play.google.com/store/apps/details?id=com.google.android.launcher)
Rooting
You can flash the latest SuperUser (phh's open source fork), Chainfire's SuperSU, or Magisk to get rooted.
Oreo/Pie Status & CAF Notes
Oreo 8.1 builds are almost bug-free at this point, but still tagged as experimental. While last issues are sorted out, I will trigger manual builds, also published at https://builds.unlegacy-android.org/aosp-8.1/hammerhead.
To my knowledge, these are the remaining issues:
Bluetooth HFP speaker (mono/SCO) output is garbled. This seems related to a more general issue with audio effect/ACDB blobs.
Once all visible issues are fixed, and stability is comparable to Nougat builds, I'll switch on official builds on our Jenkins server.
Pie 9.0 builds are also becoming fully usable. Current builds have the same one remaining HFP bug described above.
Beyond "official" experimental builds, I post personal builds (including CAF experiments) in the hammerhead folder here.
Regarding sources for the WIP CAF kernel-based builds, see https://github.com/airend/android_kernel_lge_hammerhead/commits/tmp/caf+113+common. Corresponding device tree is still in rough shape and not uploaded yet, but assuming everything goes well, it'll replace current device tree when it's ready.
I've used the 05/04 build for 2 days a few weeks ago and it was a great rom.
The only issue I came across back then was that it has the green flickering when recording videos.
It's nice that the project has a XDA thread now and I gonna test this rom asap.
Thanks for keeping our good old Nexus 5 up to date.
Nexive said:
The only issue I came across back then was that it has the green flickering when recording videos.
Click to expand...
Click to collapse
Should be fixed on current builds (both green bar, and Google Camera flickering).
have a volume wake option?
Does it have issues with network location (Battery saver location)?
Some AOSP-based ROMs have this issue, so many apps (Chronus, Google Fit, f.lux, Instagram) can't get location.
alessio89g said:
Does it have issues with network location (Battery saver location)?
Some AOSP-based ROMs have this issue, so many apps (Chronus, Google Fit, f.lux, Instagram) can't get location.
Click to expand...
Click to collapse
No, all UA ROMs have this issue fixed
Ziyan said:
No, all UA ROMs have this issue fixed
Click to expand...
Click to collapse
Great, I think I'll try this ROM tomorrow!
--- --- ---
EDIT:
Is there any kind of changelog?
--- --- ---
RE-EDIT:
Okay, I found this:
https://gerrit.unlegacy-android.org
Hi....
Any screen shot?
keretapanau said:
Any screen shot?
Click to expand...
Click to collapse
Umm… it's barebones AOSP?
Buttery smooth,everything seems to be working fine here..Awesome jobs dev..keep it up.Finally this is the rom i been waiting for.:good:
CreateYourDream said:
have a volume wake option?
Click to expand...
Click to collapse
It is not an AOSP feature. It is something custom roms introduced.
Android-Andi said:
It is not an AOSP feature. It is something custom roms introduced.
Click to expand...
Click to collapse
thanks for answer, but i have broken power button :crying:
Cant Install Gapps
I've flashed it for about half a day, and it's very promising, it seems a great ROM!
I've noticed only three defects:
- The blue light filter (Night mode) is missing;
- With stock kernel, SuperSU will be in system mode;
- The Clock app crashes if you try to add another Time zone in the main screen.
Everything else works fine.
CreateYourDream said:
thanks for answer, but i have broken power button :crying:
Click to expand...
Click to collapse
Did you try this
Check out "Custom Navigation Bar"
https://play.google.com/store/apps/details?id=xyz.paphonb.systemuituner
Thanks for the ROM guys!
When I flash Open Gapps this message appears:
"This Gapps pkg is for Android 7.1.x ONLY
Please download the correct version for you ROM: 5.1.1 (SDK 22)"
I've flashed build ua_hammerhead-7.1.2-20170423031839 before gapps
Is there any alternative app for kcal..?KCAL app seems to be force closing once installed.
substratum support please
After some hard work i like to share you the first working optimized stock rom from version 11M with stock kernel (for now).
This rom is a minimal rom, as i like it. No Google services or Framework inside.
I will provide extra packs for google stuff.
Main features:
- full deodexed
- De-bloated (Removed Google & some LG Apps)
- Kernel is free from dm-verity and root check
Tweaks:
- Jpeg and Video optimization
- remove some debug
- high Impedance Mode All The time (big thanks @Whiskeyomega)
- build.prop optimization
Installation:
You need an open Bootloader!
This rom is ONLY FOR H930!
You can flash the rom inside twrp.
After flashing the rom please install the neweset magisk root.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Then wipe Dalvik/ART and Cache.
Feedback:
If you find some bugs or something is not working correct, please contact me.
Future Release:
- include magisk installer
- include new modem
- you tell me
Download:
Version without Google:
https://drive.google.com/open?id=11Zy0Sac9LXZDqHODosPDBmsGtdedI8ob
Version with all Apps:
https://drive.google.com/open?id=18xDw6X5SYF9FBwZTyGWmEKthICWf5h08
XDAevDB Information
Debloated Stock ROM Open EU 11m
Contributors
djsven
Source Code: http://opensource.lge.com
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2018-01-25
Created 2018-01-25
Last Updated 2018-01-25
Downloading and testing right now! MANY MANY THANKS!!
You are the first one..
Thanks me after you test it
Dumb question now that i read it ... Google service and Framework free ... can i flash Gapps?
Not realy i guess..the gapps are for aosp roms ?
If, you do not flash this..
I will provide tomorrow an update packet for it.
Have you flashed the rom?
Dirty flashed from 10f for now. Google FC's as thought. Tried flash gapps but the same. Ok then i will restore twrp backup. Cannot test more after i am in montenegro the whole weekend where i have no time to test/flash more. Need a working system for the weeken. ....
Sent from my LG-H930 using XDA-Developers Legacy app
Oh wow....Yea i havent the time to fix my rom really. had problem after problem IRL so im glad someone else got there.
@ Whiskeyomega
Thanks
@ Mr. Schnabel
I will upload a new ZIP with Google Inside.
Flashing right now...
Edit1: No way... It tells me The encription did not succeed ! And i have to reboot the phone...
Thanks for your anwer.
So you did encrypt your phones data partition?
Realy strange.
Is this the only message?
My phone is not enctypted.
I will have a look on it.
djsven said:
Thanks for your anwer.
So you did encrypt your phones data partition?
Realy strange.
Is this the only message?
My phone is not enctypted.
I will have a look on it.
Click to expand...
Click to collapse
I followed the step from another user. I paste all steps.
"The order i flashed everything and how i set up everything was:
1) flash twrp and make sure it sticks
2) boot twrp
3) completly wipe /data, so twrp is able to mount it (you have to format the data partition.)
3.5) DONT reboot
4) flash no-verity-opt-encrypt-6.0.zip, root disabler and magisk
5) boot stock rom and setup everything (initial setup and so on)"
I wiped all data, system, internal, etc... also I formatted /data ....
I'll do some checks and I'll post the results.
Thx in advance
---------- Post added at 09:14 AM ---------- Previous post was at 08:58 AM ----------
It seems I partially solved. It boots but it stuck at "Checking for updates... This may take a minute or two"
Of course, as i saw, this rom does not include gapps so i'm unable to setup the google account, and that's why I select "set up as new".
Edit: I think i'm going to wait for the google framework included version How is it going?
Stock ROM with google is uploading now..
New Version with all google inside is up...
Would it be possible to flash micro gapps from opengapps onto the ROM with gapps removed?
Might try it out in a couple of hours and I'll report back.
djsven said:
New Version with all google inside is up...
Click to expand...
Click to collapse
It would be perfect if the gapps package incuded in the full version comes with some bloat
I mean movies, music, powerpoints, documents from google... For me this is bloat too
5 hours with the full version flashed and at the moment zero problems.
This is an idea..
Iam going to create a tool for deleting the bloatware which you want.
But my focus i on the kernel now.
Thanks for positiv feedback .-)
I need the phone working for the weekend but gonna definitely try this on Monday. Good work!
djsven said:
This is an idea..
Iam going to create a tool for deleting the bloatware which you want.
But my focus i on the kernel now.
Thanks for positiv feedback .-)
Click to expand...
Click to collapse
I'm trying again with the version without google and there is no way to enter the wifi key to continue. and it stops searching for updates. But it promises
Good job
fliky said:
Would it be possible to flash micro gapps from opengapps onto the ROM with gapps removed?
Might try it out in a couple of hours and I'll report back.
Click to expand...
Click to collapse
Just finished installing it with the no Google ROM and pico gapps it works great, just one hitch when installing I couldn't get the keyboard to come up on the screen.
Solved the keyboard issue by connecting an external keyboard and installing gboard from the play store.
Realy interesting.
@ fliky
Which keyboard you like to use?? Stock one or from google?
@all
This rom is the beginning!! The first one.
Now we have the base to do more.