Develop Bugs

[Q] Problems with a boot loop on CDMA after flashing CM9

Sorry for the trouble, I know these questions get asked often here but I've been searching around and it seems like I'm getting conflicting answers everywhere I look. I'm trying to use this kernel: http://forum.xda-developers.com/showthread.php?t=1844049 with this ROM: http://forum.xda-developers.com/showthread.php?t=1772897
I'm unsure of exactly what order to do everything in. It seems like this should be correct, no?
full wipe in recovery
flash kernel zip in recovery
flash boot.img in fastboot
flash cm9 in recovery
Am I totally off course? My phone is obviously still functioning...to an extent. Any help is greatly appreciated. Thanks in advance.
Edit: just tried again with the above steps. Same issue. Boots into CM9 as expected, then about 30-60 seconds later it reboots itself. I know there's something I'm missing, I just can't figure out what :\

Wipe cache
Wipe dalvik cache
Wipe system
Den flash Rom
Sent from my HTC One V using xda app-developers app

Nishblueweapon said:
Wipe cache
Wipe dalvik cache
Wipe system
Den flash Rom
Sent from my HTC One V using xda app-developers app
Click to expand...
Click to collapse
If that doesn't work see if you can't find a newer boot.img (helped me on AOKP)

Alright. I just tried that and I'm still encountering the same issue. Maybe I'm just paranoid but now it seems like the reboots are happening faster than before.
edit: tried flashing AOKP just for the hell of it. Even after following these instructions to a T, the same thing is happening:
* Download ROM and GApps
* Make sure you're running the latest version of your recovery
* MAKE A BACKUP
* Wipe cache/dalvik
* Wipe data (only if coming from another JB ROM / ICS) (NOT Needed for updating, but recommended for full effect)
* Flash ROM
* Flash GApps
* Boot into Bootloader
* fastboot flash boot boot.img (The one inside the ROM.zip)
* reboot
Tomskii said:
If that doesn't work see if you can't find a newer boot.img (helped me on AOKP)
Click to expand...
Click to collapse
where did you find it? I think I'm using the newest one
edit 2: tried reflashing SuperSick http://forum.xda-developers.com/showthread.php?t=2024758 in fastboot. no change

This could solve your problem
http://forum.xda-developers.com/showthread.php?t=1996665
Sent from my One V using xda premium

Let me guess, Virgin Mobile, and if you check, I'll bet your current radio version ends with .9xx. Flash the original Sprint RUU to go back to the old radio and you'll be good to flash ROMs and kernels.

Stevis33 said:
Alright. I just tried that and I'm still encountering the same issue. Maybe I'm just paranoid but now it seems like the reboots are happening faster than before.
edit: tried flashing AOKP just for the hell of it. Even after following these instructions to a T, the same thing is happening:
* Download ROM and GApps
* Make sure you're running the latest version of your recovery
* MAKE A BACKUP
* Wipe cache/dalvik
* Wipe data (only if coming from another JB ROM / ICS) (NOT Needed for updating, but recommended for full effect)
* Flash ROM
* Flash GApps
* Boot into Bootloader
* fastboot flash boot boot.img (The one inside the ROM.zip)
* reboot
where did you find it? I think I'm using the newest one
edit 2: tried reflashing SuperSick http://forum.xda-developers.com/showthread.php?t=2024758 in fastboot. no change
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1882990
Then click on: latest boot.img (it's on the bottom of the post). Then when you get onto the download website I used the top one. Renamed it to boot.img once downloaded and flashed it, this worked for me.

Tomskii said:
http://forum.xda-developers.com/showthread.php?t=1882990
Then click on: latest boot.img (it's on the bottom of the post). Then when you get onto the download website I used the top one. Renamed it to boot.img once downloaded and flashed it, this worked for me.
Click to expand...
Click to collapse
He is CDMA, why are telling him to flash a primou rom?

[OFFICIAL][4.3][TF300T] CyanogenMod 10.2 Nightlies

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
REQUIREMENTS
Click to expand...
Click to collapse
- TF300T (it can be installed on TF300TG but no 3G support!)
- Unlocked bootloader
- Your bootloader must be at least on Jelly Bean version (10.4 and above). - We recommend that you run the 4.2 Bootloader.
DOWNLOADS
Click to expand...
Click to collapse
Google Apps:
http://goo.im/gapps
Nightlies:
http://get.cm/?device=tf300t
HOW TO INSTALL
Click to expand...
Click to collapse
First installation :
1) Unlock your device, and install TWRP recovery (look in the development forum for the thread)
2) Push the update zip to your internal memory
3) Reboot in recovery (Shutdown tablet, press Vol Down + Power, then press Vol Up when prompted)
4) Make a backup
5) Navigate to "Install zip from sdcard", "Choose zip from sdcard", and choose the update zip you previously pushed to your tablet
5a) If you want Play Store, flash gapps now too (link above)
6) Go back and Wipe data/cache
7) Reboot
Updating from previous build:
1) Push update zip to /sdcard/
2) Reboot in recovery
3) Flash as above
4) Reboot
If any issue after updating, wipe data.
CHANGELOG
Click to expand...
Click to collapse
http://changelog.bbqdroid.org/#tf300t/cm10.1/next
SOURCES
Click to expand...
Click to collapse
http://github.com/cyanogenmod
http://github.com/cyanogenmod/android_kernel_asus_tf300t
http://github.com/cyanogenmod/android_device_asus_tf300t
DEVELOPERS
Click to expand...
Click to collapse
xplodwild, bumble-bee (for tf201 device tree from which this tree is inspired), chrmhoffmann, loganmc10, dasunsrule32 for some help, cyanogenmod
SUPPORT US
Click to expand...
Click to collapse
You can either help us by giving FULL bug reports WITH LOGS, WITH REPRO CASE, ETC, or by submitting patches.
If you're not a developer, but still want to support you can hit the "Donate to me" button up ahead. Chrmhoffmann, please remind me to give you some of it - Remember this is something we're doing in our free time, so a small gift is always appreciated and motivates us to keep on updating the port Thanks to all donators!

Woot thanks man, appeciate it!

Tears of Joy
Well almost anyways.

Anyone else getting FC every time the AOSP keyboard try's to popup ?
EDIT: reflashed without gapps and it's fine, but as soon as I flash gapps the FC come back on popup keyboard. Otherwise rom seems fast, everything else seems ok at first glance but I flashed back to a backup cause the ROM in unusable without the keyboard.

So we don't have to be on the 4.2 bootloader for this to work? 4.1 bootloader will be fine?

zaki0saad said:
So we don't have to be on the 4.2 bootloader for this to work? 4.1 bootloader will be fine?
Click to expand...
Click to collapse
The 4.2 Bootloader is preferred, but I have only tested it on the 4.2 bootloadee (my own build). Off course you can try if you are still on the 4.1 bootloader. If the ROM does not boot, then you will know
Sent from my Nexus 10 using Tapatalk 4

zurny said:
Anyone else getting FC every time the AOSP keyboard try's to popup ?
EDIT: reflashed without gapps and it's fine, but as soon as I flash gapps the FC come back on popup keyboard. Otherwise rom seems fast, everything else seems ok at first glance but I flashed back to a backup cause the ROM in unusable without the keyboard.
Click to expand...
Click to collapse
Did you build yourself? Because there is no nightly build yet to download.
If you downloaded the latest nightly from get.cm, and flashed the 4.3 gapps then it would be a bit logical that you get a fc because you flashed 4.3 gapps on a 4.2.2 build.
Sent from my Nexus 10 using Tapatalk 4

Great! Waiting patiently for the official thing

joelalmeidaptg said:
Great! Waiting patiently for the official thing
Click to expand...
Click to collapse
Yeah, that same feeling when he made a post for CM10.1 and wait for a while to get it haha.

scanno said:
Did you build yourself? Because there is no nightly build yet to download.
If you downloaded the latest nightly from get.cm, and flashed the 4.3 gapps then it would be a bit logical that you get a fc because you flashed 4.3 gapps on a 4.2.2 build.
Sent from my Nexus 10 using Tapatalk 4
Click to expand...
Click to collapse
Wow I feel an idiot, looks like I flashed 10.1, I looked at the release date but didn't check the filename, carry on, nothing to see here

glad for your repaired tf300

After I saw that you recommended CWM for this ROM, I downloaded and flashed it. It ****ed up my device, only allowing me into CWM, not even fastboot. That gives me ADB, but CWM wont mount anything, so I cant flash anything...PLEASE HELP ME!!!

I believe you need TWRP 2.5 instead
kriscodian said:
After I saw that you recommended CWM for this ROM, I downloaded and flashed it. It ****ed up my device, only allowing me into CWM, not even fastboot. That gives me ADB, but CWM wont mount anything, so I cant flash anything...PLEASE HELP ME!!!
Click to expand...
Click to collapse
The new bootloader requires TWRP 2.5 instead - I am a firm believer in CM recovery for all my recovery needs except this. Please correct me if I am wrong, but currently as far as I know, TWRP 2.5 is the only recovery that works with the new Android 4.2+ bootloader. Check the basic threads for the background.

kjwaugh said:
The new bootloader requires TWRP 2.5 instead - I am a firm believer in CM recovery for all my recovery needs except this. Please correct me if I am wrong, but currently as far as I know, TWRP 2.5 is the only recovery that works with the new Android 4.2+ bootloader. Check the basic threads for the background.
Click to expand...
Click to collapse
I was on TWRP 2.5.0.0, but in the instructions in this ROM it said CWM. Now I can't flash Recoverys or anything...
What can I do to fix it?

Try the CWM Recovery thread
kriscodian said:
I was on TWRP 2.5.0.0, but in the instructions in this ROM it said CWM. Now I can't flash Recoverys or anything...
What can I do to fix it?
Click to expand...
Click to collapse
You were already there - try the link below:
http://forum.xda-developers.com/showthread.php?t=1668173&page=46
It covers the basics and shows the "new" fastboot mode aswell as the current state of this "new" bootloader requiring TWRP 2.5

Can I update from 10.1? In my galaxy s the partition layout for 10.2 is different from the 10.1 cm so it required a full wipe.
Thanks
Sent from my TF300T using Tapatalk 2

kjwaugh said:
You were already there - try the link below:
http://forum.xda-developers.com/showthread.php?t=1668173&page=46
It covers the basics and shows the "new" fastboot mode aswell as the current state of this "new" bootloader requiring TWRP 2.5
Click to expand...
Click to collapse
But neither of the methods work as I am not allowed into Those choices... It goes straight into CWM, no fastboot

kriscodian said:
But neither of the methods work as I am not allowed into Those choices... It goes straight into CWM, no fastboot
Click to expand...
Click to collapse
Make sure you have adb drivers installed when you are in CWM (check in device manager on pc) and then try typing adb reboot bootloader in adb.

Already tried...

Start at the beginning then
kriscodian said:
Already tried...
Click to expand...
Click to collapse
Install Asus stock rom, then install recovery, root it, factory reset and then continue with usual rom-flashing instructions.

[ROM][6.0][UNOFFICIAL] CyanogenMod 13.0 | Hercules [12-17-16]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
*/
This is an unofficial CyanogenMod 13.0 Marshmallow ROM. This is currently a work-in-progress, so you can expect to run into problems while using it.
Working:
Modem / RIL
Data
WiFi
GPS
NFC
SD Card
Audio
Camera
Bluetooth
Sensors
Video
Issues:
You tell me
Credits:
CyanogenMod
Google / AOSP
CAF
sultanxda
And others
Downloads:
NOTE: You must virtually repartition your device, otherwise you cannot install this ROM! See the 2nd post for details.
ROM: https://www.androidfilehost.com/?w=files&flid=76548
Recommened GApps: http://opengapps.org (Stock or Aroma package recommended)
TWRP recovery updates*: https://androidfilehost.com/?w=files&flid=40309
View http://www.cmxlog.com/13/ for current changes.
Full changelog including device-specific changes can be found HERE.
*You must have completed the repartitioning process in order to install the TWRP recovery updates.
XDA:DevDB Information
[UNOFFICIAL] CyanogenMod 13.0, ROM for the T-Mobile Samsung Galaxy S II
Contributors
bryan2894
Source Code: http://github.com/bryan2894
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Latest Radio Firmware + Recovery
Version Information
Status: Stable
Stable Release Date: 2016-12-01
Created 2015-11-11
Last Updated 2016-12-17

Installation Instructions
NOTE: If you repartitioned your phone using a pit file, its recommended that you flash back the original unmodified pit to take full advantage of the increased space.
Latest official TWRP recovery: http://forum.xda-developers.com/showpost.php?p=61591064&postcount=1276
Virtual Partition TWRP recovery
TWRP 3.0.2: https://www.androidfilehost.com/?fid=313042859668276543
From another non-virtual partitioned ROM:
Make sure you have the latest OFFICIAL TWRP installed.
Backup current ROM if desired
Back up EVERYTHING on your internal SD card to your computer (the internal SD card WILL BE ERASED in the next step).
In TWRP, go to Wipe -> Advanced Wipe -> check Internal Storage -> press on "Repair or Change File System" -> press on "Change File System" -> press on "EXT4", and then swipe to start formatting the internal SD card. This can take up to a minute.
Wipe Data, Cache and System.
Copy the newest version of my TWRP recovery to your device and flash it.
After that is finished, go back to the main menu, then go to Reboot and press on Recovery.
Once the device has rebooted back into TWRP recovery, goto mount then uncheck and recheck data.
Copy and flash the new ROM and your GApps package to your device and flash
Reboot system
Connect your phone to your computer and copy back your backed-up internal SD card data to the internal SD card.
Repartitioning is completed. Enjoy your 8GB of additional app storage space.
From CM12.1 or another virtual partitioned ROM:
Factory reset (to avoid problems)
Flash ROM and GApps
Updating to a newer version:
Just flash ROM and reboot.

Yay! Gonna try this right now, Thanks!
Edit: Uh, just saw.. RIL is not working at all or with issues?

YeshuaGnR said:
Yay! Gonna try this right now, Thanks!
Edit: Uh, just saw.. RIL is not working at all or with issues?
Click to expand...
Click to collapse
It could be working, but I don't have a SIM card to test.
Sent from my LG-D851 using Tapatalk

hollly s*** I am still using your paranoid 5.1 but this is blast!! I can't believe you brought marshmallow to us:laugh:
gonna test it as soon as possible and write report here ty so much:good::good:

Cant wait to have RIL working to start using this!

It only took me 5 years for my first CM rom, thanks.
I'm using it sans SIM, too.
I had a few issues with TWRP, but I pushed through...
My Herc's capacitive buttons have gone to crap, but the onscreen nav buttons work great.
I'm still learning 6.0 M, so thanks again for the upgrade.

Working fine, no problems with TWRP at all, got signal but when someone calls me the phone reboots.
Ill try to come back with some logs if that could help

So coming from Paranoid Android 5.1 which is stable as can be, is this ROM stable? Like with the RIL, that is what I'm most concerned about. Anyone had any problems with it? Also, once I virtually partition my memory will I still be able to install other ROMs that don't require virtually partition ROMs? Thanks!

gwilly330 said:
So coming from Paranoid Android 5.1 which is stable as can be, is this ROM stable? Like with the RIL, that is what I'm most concerned about. Anyone had any problems with it? Also, once I virtually partition my memory will I still be able to install other ROMs that don't require virtually partition ROMs? Thanks!
Click to expand...
Click to collapse
Is stable, been using this since yesterday and everything seems to be working, bit when you recieve a call the phone reboots, Data is working and SMS to.
You cant install non-virtually partitioned ROMs, the process to undo this is installing Oficial TWRP and re-formatting everything but Ext SD Card, that worked for me.

YeshuaGnR said:
Working fine, no problems with TWRP at all, got signal but when someone calls me the phone reboots.
Ill try to come back with some logs if that could help
Click to expand...
Click to collapse
Ok, I should have a fix for that next release.
Sent from my LG-D851 using Tapatalk

bryan2894 said:
Ok, I should have a fix for that next release.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
Not trying to he pushy or anything, if I am sorry but how long should this take? I am going to be using this ROM when I get the chance to install, probably tommorow, but if it is going to be updated should I wait, or will the update take awhile?

gwilly330 said:
Not trying to he pushy or anything, if I am sorry but how long should this take? I am going to be using this ROM when I get the chance to install, probably tommorow, but if it is going to be updated should I wait, or will the update take awhile?
Click to expand...
Click to collapse
to be honest i tought skyrocket or hercules would not get M i was wrong but then again it looks just like lillipop.. am glad there are developers that continue to bring life to the s2. i just recently got me a lg g2 and they lack on developers.. not a lot of support for that device.. does it feel a difference? what about battery?

So I flashed TWRP over CWM, and TWRP and when going to Wipe it is not showing my Internal SD to partition.
Nvm, I fixed this

New build is up. The issue with receiving calls should be resolved

bryan2894 said:
New build is up. The issue with receiving calls should be resolved
Click to expand...
Click to collapse
Receiving calls has been fixed but now not able to make calls
When trying to make calls, get a "Mobile Network Not Available" error. the network signal in status bar goes blank and then re-appears after a few seconds
plus when receiving calls, the name of the person who calls doesn't appear, just the number. shows up as Unknown in recent calls.
Also not able to choose preferred network type in mobile network settings
Logs attached
GPS is working, got a fix fairly quickely

everything seems to work great except the 2 problems with signal that are mentioned in post above
can you post us some fast fix only for that in zip file if it's not too big problem to patch this bug pls

what Gapps should i use, the 5.1 or the 6.0

junio07 said:
what Gapps should i use, the 5.1 or the 6.0
Click to expand...
Click to collapse
6.0. I recommend the micro, nano, or pico Gapps. The Aroma package would also work. That way, you get to choose which Gapps you install. The only problem with that can be it is a bigger package and therefore takes longer to download. Also, Cyanogen recently released Capps that has the Cyanogen OS system apps (not including Gapps). I flashed the micro Gapps and the Capps and everything is fine for me (except cell, which I haven't tested.)
Have a great evening!

jrc2 said:
6.0. I recommend the micro, nano, or pico Gapps. The Aroma package would also work. That way, you get to choose which Gapps you install. The only problem with that can be it is a bigger package and therefore takes longer to download. Also, Cyanogen recently released Capps that has the Cyanogen OS system apps (not including Gapps). I flashed the micro Gapps and the Capps and everything is fine for me (except cell, which I haven't tested.)
Have a great evening!
Click to expand...
Click to collapse
thanks! gonna try the rom now :fingers-crossed:

[Recovery][Official] OrangeFox Recovery - R10 [stable][all working]

OrangeFox Features
* Unique design in Android Pie style
* Supports Android Oreo and Pie
* Supports Treble and non-Treble ROMs
* Updated with latest TWRP commits
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk
* White Flashlight
* Password, torch, led
* Support for Miui and Custom ROMs
* Better language support
* Optimized versions of community scripts
* Fox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
* Alternative lockscreen
* And many more!
Click to expand...
Click to collapse
About this build
Clean OrangeFox R10, without any tweaks and modifications.
Click to expand...
Click to collapse
Information
OrangeFox Version: R10
Latest Stable: R10.0-1
TWRP: 3.3.1.x
Click to expand...
Click to collapse
Issues
None
Click to expand...
Click to collapse
Downloads
Stable: https://files.orangefox.website/OrangeFox-Stable/ysl
Beta: https://files.orangefox.website/OrangeFox-Beta/ysl
Click to expand...
Click to collapse
Source
Device Tree: https://gitlab.com/OrangeFox/Devices/ysl
Click to expand...
Click to collapse
XDA:DevDB Information
[R10] OrangeFox Recovery - Stable [Official][all working], Tool/Utility for the Xiaomi Redmi S2
Contributors
MyCats
Version Information
Status: Stable
Created 2019-07-10
Last Updated 2019-08-30

Hi, i try use R10 Stable version, and there is no Format Data option.
I check on Manage Partition (that mentioned on Wipe section), no Format Data option.
I like this recovery, cute Fox.

meiax93 said:
Hi, i try use R10 Stable version, and there is no Format Data option.
I check on Manage Partition (that mentioned on Wipe section), no Format Data option.
I like this recovery, cute Fox.
Click to expand...
Click to collapse
Hi, I will fix it in next Beta (R10.1-RC1)

MyCats said:
Hi, I will fix it in next Beta (R10.1-RC1)
Click to expand...
Click to collapse
Thanks. I use TWRP to do format data and after finish setup MIUI 10.3.3, i use back this OrangeFox.
Anyway keep it up, great job. :good:

MyCats said:
OrangeFox Features
About this build
Information
Issues
Downloads
Source
Click to expand...
Click to collapse
Hi, @MyCats!
Can you help me?
How I can use it?
What need to do?
maybe links on resources what to do and how?

kaanr said:
Hi, @MyCats!
Can you help me?
How I can use it?
What need to do?
maybe links on resources what to do and how?
Click to expand...
Click to collapse
See some recovery installing guide

MyCats said:
See some recovery installing guide
Click to expand...
Click to collapse
Hi!
Thank you!
I'm newbie in that))

New build is up! (R10.0-1 Stable)
- Works fine with Android 8 and 9
- Fixed img displaying
- Fixed baterry displaying
- Fixed format data
- Fixed MTP
- Fixed flashlight
No known issues now.

Can i use this to install 64 bit rom? Pls reply im going to use it now cus ur recovery has less hassle and clear instructions

Devilukeards said:
Can i use this to install 64 bit rom? Pls reply im going to use it now cus ur recovery has less hassle and clear instructions
Click to expand...
Click to collapse
It should, try it. Don't have this device on hands so can't test.

I have a question is that can I delete these files on the fox folder (it's 3GB) . Also I don't want the orange fox to install my miui updates, I just want my system updater to do it even if it means removing the orange fox, it's still ok.. can I do this?

The beta version of this recovery shows SD card and USB storage 0 mb and thus we can't access them from recovery nor we can mount them (this problem is in beta version only)

I flashed stable version of this recovery but touch was not responding, not even a bit..... then i installed beta version and touch worked, but whenever i tried to install lineage os 16.0 , it shows error 255 ..... i also tried twrp 3.2.1.0 earlier but touch was not responding there as well....nor was otg mouse.... i flashed twrp 3.3.1.0 as well and there otg was working fine but even after installing the rom amd booting up, touch was irresponsive help!!

zick pick said:
I flashed stable version of this recovery but touch was not responding, not even a bit..... then i installed beta version and touch worked, but whenever i tried to install lineage os 16.0 , it shows error 255 ..... i also tried twrp 3.2.1.0 earlier but touch was not responding there as well....nor was otg mouse.... i flashed twrp 3.3.1.0 as well and there otg was working fine but even after installing the rom amd booting up, touch was irresponsive help!!
Click to expand...
Click to collapse
Try this recovery https://forum.xda-developers.com/redmi-s2/development/arm64-twrp-v3-3-1-0-redmi-s2-y2-t3954150
For me it's working fine

i already mentioned , i had tried 3.3.1.0 ..... by the way my issue was resolved by the service centre and for free (under warranty ) i just cleared everything , installed original rom locked the bootloader and went straight in stating that touch became irresponsive after update .... also i would like to update that , i tried pitch black , orange fox stable plus beta , twrp 3.3.1.0,3.2.1.0 and at last flashed stock fastboot rom using mi flash tool as well but failed to solve the problem then ..... I'd 2 phones that made it easy for me

This is really nice, Thanks devs

I can't decrypt the data partition. I'm trying for hours to find an answer. Can anyone please help me? Lock screen password doesn't work.

Snpy1337 said:
I can't decrypt the data partition. I'm trying for hours to find an answer. Can anyone please help me? Lock screen password doesn't work.
Click to expand...
Click to collapse
Go to wipe and click on format data then enter yes and swipe the slider it will format your internal and your encryption will remove

mohitdabas07 said:
Go to wipe and click on format data then enter yes and swipe the slider it will format your internal and your encryption will remove
Click to expand...
Click to collapse
Thanks for the answer, my friend. I really appreciate it. I've already solved this problem.
The thing was that after I format data and rebooted to system it kept encrypting it again. For some people rebooting to recovery again and flashing magisk from an SD card worked. For me it didn't. So I tried again but wiping data, cache, and system and flashing another ROM.

Hi,
I'm actually considering buying the Xiaomi Redmi S2 and I have some questions regarding the device and this recovery.
1. Would you recommend the S2 in 2019/2020
2. Is Treble TWRP required to use treble ROMs or can I install this directly and also use treble ROMs.
3. Any recommended tweaks for this device.
4. What configuration of RAM and Storage would you recommend? (I only found 3GB RAM and 32GB Storage versions)
5. Expandable Storage? (microSD)
6. Any bugs with treble in general or specific treble ROMs?
7. Anything to look for when buying this device used?
Kind Regards

Palladium OS Unofficial Oneplus 5 and 5T (Vanilla and GAPPS)

include <std_disclaimer.h>
/*
* Your warranty is... still valid/probably? ( Subject to OEM's)
*
*We are not responsible for bricked devices, dead SD cards
* unpleasant experiences. Custom ROM's are Custom for a reason and
* as developers, we try our best to give you the most complete experience
* When you choose our ROM, its a choice which you make but it doesnt make us
* liable to any unfortunate events. But we will be happy to help for the greater good.
/
Palladium OS is not yet another ubiquitous os but a trendsetter of its own level. The Prime focus here
are on speed, stability and above all, its a community driven os where everyone can experience their ideas
without any limitations. All these is complemented by the Meteor Fall programme which are a series of OTA updates
which adds in new features and suggestions. So, now you know why its christened The Palladium OS.
Source
Palladium: PalladiumOS
Install Instructions
Backup your personal data (Important)
- Download the ROM and GApps and transfer them to your device.
- Boot to recovery (TWRP recommended).
- Wipe the System, Cache, Data and ART/Dalvik cache.
- Flash the ROM
- Flash Gapps Zip file (Only for Vanilla variant)
- Reboot your device.
Downloads
ROM: sourceforge
GApps: NikGapps
Credits
- Google for AOSP
- LineageOS
- Project Fluid
- ShapeShift OS
- Pixel experience
- Project Streak
- Dot OS
- Octavi OS
- Bliss ROM
- AICP & POSP & Pixys Team for thread template idea
- Also many pro devlopers who all help us to bring this rom to you..
- Please let us know if we forgot to mention your name in credits..
AND TO THE PALLADIUM TEAM FOR THIS ROM​
Build Author/Maintainer - Arokz Dpk
Device Name - Oneplus 5 and 5T
Device Codename -dumpling and cheeseburger
Kernel Source - https://github.com/ArokzDP/kernel_oneplus_msm8998
ROM Status - Unofficial
Android Version - 11.0
ROM Version - v1.3

thanksssssss

Wow! Thank you, is it my birthday? I will flash over the next couple of days. Thank you once again.

I have just tried to flash the gapps version. I flashed with Majisk and got stuck in a bootloop for 25 minutes. Went back into recovery, went through the wipe process again and re-flashed Palladium. I got the 'successful' flash message in Twrp, but when I went to reboot it said that there was no OS installed. I was able to flash the ROM that I was on previously (Pixel) without any problems. Maybe I had a corrupted download, sadly I don't have the time to try again right now, I will try again in a few days.

Drhedphuk said:
I have just tried to flash the gapps version. I flashed with Majisk and got stuck in a bootloop for 25 minutes. Went back into recovery, went through the wipe process again and re-flashed Palladium. I got the 'successful' flash message in Twrp, but when I went to reboot it said that there was no OS installed. I was able to flash the ROM that I was on previously (Pixel) without any problems. Maybe I had a corrupted download, sadly I don't have the time to try again right now, I will try again in a few days.
Click to expand...
Click to collapse
Am on the same gapps version and it booted jus fine for me. If the zip is corrupted u wont be getting successful flash message. Maybe try again afterwards when free. Also happy that u tried it.

Arokia said:
Am on the same gapps version and it booted jus fine for me. If the zip is corrupted u wont be getting successful flash message. Maybe try again afterwards when free. Also happy that u tried it.
Click to expand...
Click to collapse
I also guess the boot loop could be due to encrypted or decrypted thing. Try with f2fs instead...

Arokia said:
I also guess the boot loop could be due to encrypted or decrypted thing. Try with f2fs instead...
Click to expand...
Click to collapse
Okay, thank you for the advice. I will let you know.

Added to the OnePlus 5 Index Thread here.

Drhedphuk said:
I have just tried to flash the gapps version. I flashed with Majisk and got stuck in a bootloop for 25 minutes. Went back into recovery, went through the wipe process again and re-flashed Palladium. I got the 'successful' flash message in Twrp, but when I went to reboot it said that there was no OS installed. I was able to flash the ROM that I was on previously (Pixel) without any problems. Maybe I had a corrupted download, sadly I don't have the time to try again right now, I will try again in a few days.
Click to expand...
Click to collapse
Happened to me as well but i got it fixed by flashing the vanilla rom first and then let it boot, after that i rebooted back to the recovery and flashed gapps. Worked just fine. Hope this will help anyone having a similar issue

Any way to get rid of the home buttons and have a home bar instead ? Couldn't find any option like Derpfest has. Props for the great rom, I'm loving it and the battery life is just incredible.

Jalef said:
Happened to me as well but i got it fixed by flashing the vanilla rom first and then let it boot, after that i rebooted back to the recovery and flashed gapps. Worked just fine. Hope this will help anyone having a similar issue
Click to expand...
Click to collapse
Thank you very much. Which gapps package did you flash?

No good for me. Whatever I try. It says that I have successfully flashed, yet when I go to reboot it says that there is no OS installed, both versions.

Drhedphuk said:
No good for me. Whatever I try. It says that I have successfully flashed, yet when I go to reboot it says that there is no OS installed, both versions.
Click to expand...
Click to collapse
Make sure you have the zip files anywhere in your internal storage. But not inside a folder within the internal storage. Because whenever you wipe data,system,cache and dalvik it will also wipe the downloaded files inside the download folder.

Jalef said:
Make sure you have the zip files anywhere in your internal storage. But not inside a folder within the internal storage. Because whenever you wipe data,system,cache and dalvik it will also wipe the downloaded files inside the download folder.
Click to expand...
Click to collapse
I kept them in the same place that I kept Pixel ROM and was able to flash that afterwards. Plus the APK's that I had within that folder and the Majisk zip were fine too. Weird issue.

Drhedphuk said:
I kept them in the same place that I kept Pixel ROM and was able to flash that afterwards. Plus the APK's that I had within that folder and the Majisk zip were fine too. Weird issue.
Click to expand...
Click to collapse
That's actually weird because when i flashed on my end everything got deleted from there

Drhedphuk said:
No good for me. Whatever I try. It says that I have successfully flashed, yet when I go to reboot it says that there is no OS installed, both versions.
Click to expand...
Click to collapse
Maybe you should try a different recovery?! I use Orange Fox and had no problems with flashing this Rom. Installed the Vanilla version plus Nik Gapps full package.

KeinePanik said:
Maybe you should try a different recovery?! I use Orange Fox and had no problems with flashing this Rom. Installed the Vanilla version plus Nik Gapps full package
Click to expand...
Click to collapse
KeinePanik said:
Maybe you should try a different recovery?! I use Orange Fox and had no problems with flashing this Rom. Installed the Vanilla version plus Nik Gapps full package.
Click to expand...
Click to collapse
I was wondering whether my codeworx Twrp was maybe outdated. Can I flash Orange fox over the top of codeworx with a zip file?
Edit: Flashed Orange Fox, I'll try again.

Yesss!! Flashed it! It was obviously the recovery version that I was running. On the suggestion of @KeinePanik I flashed Orange Fox recovery and voila! (Thank you my friend)
My apologies to the developer and everyone else for flooding this thread with my issues.
I have been running the app for about 5 hours now and can report that it is really smooth, great battery life and some nice UI extras. Many thanks to the dev, will it go official?

Current release has june sec. patch or shall I wait for the upcoming update if it around the corner ???

m.omdaa said:
Current release has june sec. patch or shall I wait for the upcoming update if it around the corner ???
Click to expand...
Click to collapse
Security patch is May 5.