[Q] Possibly bricked phone - Huawei Ascend P6, Mate

Hi there fellow xda users!
Today my father decided it was finally the time to root and change his rom on his ascend p6 after seeing how flawless my note 3 with a custom rom runs.
So, the problem is the following: after he had rooted his phone with kingo root (if I recall) he tried to install cwm recovery using the app on the market. During the instalation, it stucked and went into a boot loop. I tried to put in download mode tho I am not sure if it has download mode and I've searched on the internet for it and didn't find anything. I have to mention the fact that I can get it into stock recovery but from that point I can not do anything. It will show "FAIL" as soon as the recovery starts.
Any way to fix this problem?
A fast response will be much appreciated, thanks for the assistance

FranticOgre said:
Hi there fellow xda users!
Today my father decided it was finally the time to root and change his rom on his ascend p6 after seeing how flawless my note 3 with a custom rom runs.
So, the problem is the following: after he had rooted his phone with kingo root (if I recall) he tried to install cwm recovery using the app on the market. During the instalation, it stucked and went into a boot loop. I tried to put in download mode tho I am not sure if it has download mode and I've searched on the internet for it and didn't find anything. I have to mention the fact that I can get it into stock recovery but from that point I can not do anything. It will show "FAIL" as soon as the recovery starts.
Any way to fix this problem?
A fast response will be much appreciated, thanks for the assistance
Click to expand...
Click to collapse
Have you tried flashing new firmware?
If not:
Download an official firmware of choice(B125, B132 etc.) Put the dload folder in the root of a sdcard then hold power and both vol buttons to force firmware flash.
Lähetetty minun P6-U06 laitteesta Tapatalkilla

Ottomaani0 said:
Have you tried flashing new firmware?
If not:
Download an official firmware of choice(B125, B132 etc.) Put the dload folder in the root of a sdcard then hold power and both vol buttons to force firmware flash.
Lähetetty minun P6-U06 laitteesta Tapatalkilla
Click to expand...
Click to collapse
Thanks a ton for your reply! It actually worked! Yay XD.

Btw: For (most) custom ROMs for the P6, you need to flash TWRP through adb
Sent from my P6-U06 using Tapatalk

Related

[Q] Help With Semi Bricked Huawei Ascend P1 Lte (u9202l) - EE

Hi, im new here, anyway here it goes.
I recently have got myself a Huawei Ascend P1 LTE On EE Network and up to now the phone has been great.
Now however i tried to install a beats audio enabler from google play, the phone rebooted but now will not do anything after it boots to the Huawei Ascend Logo. The screen just turns black.
I can boot the handset into stock recovery (Power + Volume Up Key) and i can boot the phone into Fastboot mode (Volume + & - Plus power key).
I really need my phone so if possible could somebody post to me a thread with step by step instructions to downloading stock roms for my phone (including links) and installing them to my phone so i can get it to boot (including required software).
Thanks
Acalvert2012 said:
Hi, im new here, anyway here it goes.
I recently have got myself a Huawei Ascend P1 LTE On EE Network and up to now the phone has been great.
Now however i tried to install a beats audio enabler from google play, the phone rebooted but now will not do anything after it boots to the Huawei Ascend Logo. The screen just turns black.
I can boot the handset into stock recovery (Power + Volume Up Key) and i can boot the phone into Fastboot mode (Volume + & - Plus power key).
I really need my phone so if possible could somebody post to me a thread with step by step instructions to downloading stock roms for my phone (including links) and installing them to my phone so i can get it to boot (including required software).
Thanks
Click to expand...
Click to collapse
Boot into stock recovery and try clearing cache, if that dont work boot into stock recovry and factory reset, you can boot into recovery by holding down the volume up button and power on the device, do not flash any ascend p1 u9220 roms to your device or you will brick it , the lte version has different firmware in the radios and it may well kill your phone
.
Thanks for the reply, ive tried factory resetting the phone, it does that but fails to reboot. I then switch off the phone, turn it back on and it loads the 1st huawei ascend logo, vibrates then goes to a black screen and does nothing else.
I flashed u9200 recovery because I thought there's no difference. now it only boots until huawei logo. is my phone bricked? if yes, can I anyhow unbrick?
You can always salvage your phone if you can boot into recovery. Simply flash the stock ROM and kernel back.
Sent from my Xperia X10 using xda app-developers app
CCVader13 said:
You can always salvage your phone if you can boot into recovery. Simply flash the stock ROM and kernel back.
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
1. I cannot get into recovery, only fastboot
2. there is no stock Rom for the p1 lte
entonjackson said:
1. I cannot get into recovery, only fastboot
2. there is no stock Rom for the p1 lte
Click to expand...
Click to collapse
send it back.its bricked tell a tale of woe..,there are a few custom roms about but for the p1 only not the p1 lte so your a bit buggered at the moment.
This might help.
I also once flashed beats audio and my legend was in boot loop like urs.I fixed it by flashing new rom.
Sent from my Legend using xda app-developers app
thanks. I already fixed it. someone provided me a boot.img, recovery.img and system.img of his working p1 lte. I flashed system.img over fastboot. then I booted my phone with fastboot boot boot.img and then over adb flashed boot.img and recovery.img because over fastboot flash I was always getting download size too large error.
now it works fine again.
entonjackson said:
thanks. I already fixed it. someone provided me a boot.img, recovery.img and system.img of his working p1 lte. I flashed system.img over fastboot. then I booted my phone with fastboot boot boot.img and then over adb flashed boot.img and recovery.img because over fastboot flash I was always getting download size too large error.
now it works fine again.
Click to expand...
Click to collapse
nice maybe share.
ROM or Backup
entonjackson said:
thanks. I already fixed it. someone provided me a boot.img, recovery.img and system.img of his working p1 lte. I flashed system.img over fastboot. then I booted my phone with fastboot boot boot.img and then over adb flashed boot.img and recovery.img because over fastboot flash I was always getting download size too large error.
now it works fine again.
Click to expand...
Click to collapse
Can u make a backup and give me ur phone ROM cz i need a stock rom or backup :/
r4z-xda said:
Can u make a backup and give me ur phone ROM cz i need a stock rom or backup :/
Click to expand...
Click to collapse
I don't have the device no more, but this thread will certainly help you!
i have problem..my phone won't switch on...after overheat..no LED flash...this is can consider hard brick???
You probley toasted the battery burnt it out.get the back off and see whats happened you can replace the battery and see if anything has burnt out.
Sent from my GT-P5110 using xda premium
Pls post system.img boot.img and recovery.img
entonjackson said:
I flashed u9200 recovery because I thought there's no difference. now it only boots until huawei logo. is my phone bricked? if yes, can I anyhow unbrick?
Click to expand...
Click to collapse
Can you post the files for p1 lte as i can't find them anywhere?
http://consumer.huawei.com/en/support/products/downloads/detail/index.htm?id=14401&pro=U9202L

my phone stuck on huawei logo help

as soon as u switch it off it comes back on and just freezes at the logo .nyone help how do I fix this
Try flashing a new firmware. Take out the SD card put any rom in the dload folder and then reboot doing the three button combo (volume + volume - and the power button) you need to have stock recovery for this to work....
Sent from my HUAWEI P6-U06 using Tapatalk
jimbo77 said:
Try flashing a new firmware. Take out the SD card put any rom in the dload folder and then reboot doing the three button combo (volume + volume - and the power button) you need to have stock recovery for this to work....
Sent from my HUAWEI P6-U06 using Tapatalk[/QUOTE
sorry I don't even know whats stock recovery so am sure I don't have .is there any other way I can fix my fone
Click to expand...
Click to collapse
No, there is no other way. What happens when you press those three buttons? Does your phone boots to recovery?
Sent from my HUAWEI P6-U06 using Tapatalk
jimbo77 said:
No, there is no other way. What happens when you press those three buttons? Does your phone boots to recovery?
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
nothing it just goes to the Huawei logo
iscaac said:
nothing it just goes to the Huawei logo
Click to expand...
Click to collapse
If you don't know what stock recovery is, you probably have it, so you should just follow his instructions
Nvm... I saw you attempted to flash twrp already. Just flash a stock recovery. Enough tutorials on here
Sent from my P6-U06 using XDA Premium 4 mobile app
lootjelo said:
If you don't know what stock recovery is, you probably have it, so you should just follow his instructions
Nvm... I saw you attempted to flash twrp already. Just flash a stock recovery. Enough tutorials on here
Sent from my P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
don't see link for tutorials or u mean here on site
I have the same problem,my phone (p6-u06) stays at huawei logo and the problem is i cant shut it off,it keeps restarting draining the batteri and the phone is geting very hot.I have tried to update from sd card but: E:failed to mount / sdcard (no such file or directory). Tried whit 3 diferit sd cards and the same and almost any firmwire i could find.I've tried to flash twrp recovery whit fast boot and doesnt work,wont flash.
The phone is rooted and unlocked.Had installed HYD52ROM_P6_V5_KK and wantend to swap to V6 and unwillingly made an internal storage wipe and since the phone is this way .If anyone can help please give me an idea what to trie next.I tried fastboot and installed stock recovery but now error: divece not found. Pls help me!!!
ciprian-ro said:
I have the same problem,my phone (p6-u06) stays at huawei logo and the problem is i cant shut it off,it keeps restarting draining the batteri and the phone is geting very hot.I have tried to update from sd card but: E:failed to mount / sdcard (no such file or directory). Tried whit 3 diferit sd cards and the same and almost any firmwire i could find.I've tried to flash twrp recovery whit fast boot and doesnt work,wont flash.
The phone is rooted and unlocked.Had installed HYD52ROM_P6_V5_KK and wantend to swap to V6 and unwillingly made an internal storage wipe and since the phone is this way .If anyone can help please give me an idea what to trie next.I tried fastboot and installed stock recovery but now error: divece not found. Pls help me!!!
Click to expand...
Click to collapse
Did you try to restart your phone pressing vol up and down together
Sent from my P6-U06 using xda app-developers app
husen4u said:
Did you try to restart your phone pressing vol up and down together
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
I tried,in goes in stock recovery but i cant do anythuing just reboot now,says no file on sdcard and a big FAIL on the screen.
ciprian-ro said:
I tried,in goes in stock recovery but i cant do anythuing just reboot now,says no file on sdcard and a big FAIL on the screen.
Click to expand...
Click to collapse
Format Your SDcard And Put Back And Try Again.
firmware
husen4u said:
Format Your SDcard And Put Back And Try Again.
Click to expand...
Click to collapse
hi husen4u.
how u doing? I'm using p6 almost two month.right now using B125, I tried kitkat beta but dnt see much improvements. last month I tried to flash CLEANROM then phone was stuck logo after I tried hard by pressing power and volume + - buttons together. but nothing happened then I run to service center. I want to try now HYD52ROM V5 but afraid if again stuck on logo. please can u guide me the easiest way to flash HYD52ROM and if stuck again wht will be solution? my purpose is to custom rom for mainly battery performance. As I use before Lenovo s820, its battery power was same ascend p6 but its last longer than ascend p6 while browsing and youtub. can you suggest some plz
husen4u said:
Format Your SDcard And Put Back And Try Again.
Click to expand...
Click to collapse
did that whit 2 sdcards format to fat 32 and put dload/UPDATE.APP and the same,no file found
downloaded stock from huawei site,didnt work.I think when i gave the wipe internal storage everythin on the internal storege was wiped.
I wonder if there is a way to put a rom direct on the internal storage or to mount a recovery or an image to the internal storage so the phone would start and shut down(it's on for 2 days and i am afraid if i let the battery drain it will not start at all).
Do you boot it with your PC connected to phone? SDcard will fail when still connected to USB
edward0181 said:
Do you boot it with your PC connected to phone? SDcard will fail when still connected to USB
Click to expand...
Click to collapse
no,the phone was not connected to the pc,the SDcard was formated and only the dload folder whit UPDATE.APP
does somebody know a method to update/install firmware via usb cable or some other method???(fastboot wont work... device not found)
the same is hapennig with my phone p6 and I dont know what else to do
i have the same problem with my mate7.it keeps restarting on its own.if i slot in the sd card to install new firm ware,it gets stuck completely until it goes off when the battery gets flat.
Hi guys,
I have the same problem. and also it does not go to recovery mode!!! even by restarting and pressing power, vol up and down together!!!
I used adb and flash boot.img and recovery.img and i think i did a mistake.
Please kindly give me a hand!!!
Thank you
Me To i have the same
Me To i have to same problem but my phone connected on pc when i use the power boutton he show the logo and gone and get a black screen and the connected to pc with name (ANDROID)
Look like no solution yet, I also have the same problem. Stuck at the logo and phone vibrating.

[Q] There is no way to get to recovery mode

So, I got an used Xperia ZL. The person who sold me this said he installed an international firmware, 4.3 and after installing SuperSU I noticed the device is rooted (and bootloader is locked). Now, I want to install a custom ROM but I cannot access Recovery mode! When phone starts there is no LED, pressing volume up does nothing, I installed Quick Boot, clicked restart on recovery but it does nothing. I even tried ADB boot recovery but the phone just restarts normally. What can I do?? I'm going crazy with this phone. Thanks for the help!
Aoi v1 said:
So, I got an used Xperia ZL. The person who sold me this said he installed an international firmware, 4.3 and after installing SuperSU I noticed the device is rooted (and bootloader is locked). Now, I want to install a custom ROM but I cannot access Recovery mode! When phone starts there is no LED, pressing volume up does nothing, I installed Quick Boot, clicked restart on recovery but it does nothing. I even tried ADB boot recovery but the phone just restarts normally. What can I do?? I'm going crazy with this phone. Thanks for the help!
Click to expand...
Click to collapse
you have to install custom recovery.
http://forum.xda-developers.com/showthread.php?t=2261606
Install XZDualRecovery, it is the only way
Sent from my Nexus 7 using XDA Premium 4 mobile app
Ah, thank you both. I got what the problem was, 'cause I installed recovery, then a new rom and lost recovery again xD Now i know, recovery needs to be installed every time something else is flashed. Thanks!
Aoi v1 said:
Ah, thank you both. I got what the problem was, 'cause I installed recovery, then a new rom and lost recovery again xD Now i know, recovery needs to be installed every time something else is flashed. Thanks!
Click to expand...
Click to collapse
Hey.... Share how to install recovery(noob method please). Im stuck too. Already tried many method. But, im still don't have recovery. Wasted 8 hours just trying to gets that mother F.
Sent from my C6502
rayzaweirdooo said:
Hey.... Share how to install recovery(noob method please). Im stuck too. Already tried many method. But, im still don't have recovery. Wasted 8 hours just trying to gets that mother F.
Sent from my C6502
Click to expand...
Click to collapse
I already posted the link above. Go to that link and install xz dual recovery.

Cannot downgrade from 4.4.2....SOLVED!

Cant seem to downgrade from 4.4.2,
After upgrading I tried to restore using a recovery from twrp but phone was just stuck on logo.
I then tried to restore stock recovery which didnt go well either, after flashing via adb I then tried to reboot into recovery to force a update to stock using update app i was still greeted with the team win logo which after a few seconds would just blink every few seconds, I then had a hell of a job restoring the twrp so I could then boot into recovery and reflash sh*tkat.
Phone flashes sh*tkat roms fine and runs backup and restore, so does anyone have any ideas why this is happening? If they could enlighten me I would be most grateful !
Im not sure for huawei mate but for p6 you needed a mid step before you can go down to jelly bean again. And this was all with stock recovery/rom. So search the forum and see if thetes a file like that.
Sent from my SM-G850F
tileeq said:
Im not sure for huawei mate but for p6 you needed a mid step before you can go down to jelly bean again. And this was all with stock recovery/rom. So search the forum and see if thetes a file like that.
Sent from my SM-G850F
Click to expand...
Click to collapse
Hi thaniks for the reply,
yes I thought that if I could re install stock recovery it would enable me to downgrade using hisuite but when I re flashed stock recovery I still got the team win logo showing then the phone would just flash again after about 4 seconds as it couldn't boot to recovery, it was just stuck a recovery bootloop.
See the topic "How to downgrade from B321 to B221"
sent from my MT1-U06 using Tapatalk 2
blankulus said:
See the topic "How to downgrade from B321 to B221"
sent from my MT1-U06 using Tapatalk 2
Click to expand...
Click to collapse
That does not apply to this problem but thanks anyway for your reply
It actually should work for you. You are having trouble going back to stock recovery right? Use custom recovery to flash the file in that post and then you won't have a problem going back to stock recovery. Then you will be able to downgrade to stock 4.2.2
sent from my MT1-U06 using Tapatalk 2
blankulus said:
It actually should work for you. You are having trouble going back to stock recovery right? Use custom recovery to flash the file in that post and then you won't have a problem going back to stock recovery. Then you will be able to downgrade to stock 4.2.2
sent from my MT1-U06 using Tapatalk 2
Click to expand...
Click to collapse
No I know how to flash recovery and use adb, my problem as stated is phone will not boot into recovery when stock is flashed
Quote: then tried to restore stock recovery which didnt go well either, after flashing via adb I then tried to reboot into recovery to force a update to stock using update app i was still greeted with the team win logo which after a few seconds would just blink every few seconds, I then had a hell of a job restoring the twrp so I could then boot into recovery and reflash sh*tkat.
swukjay said:
No I know how to flash recovery and use adb, my problem as stated is phone will not boot into recovery when stock is flashed
Quote: then tried to restore stock recovery which didnt go well either, after flashing via adb I then tried to reboot into recovery to force a update to stock using update app i was still greeted with the team win logo which after a few seconds would just blink every few seconds, I then had a hell of a job restoring the twrp so I could then boot into recovery and reflash sh*tkat.
Click to expand...
Click to collapse
If you have custom rom up then you probably have root too. So try this: get an app called rashr from store and allow it root permisions, then get the stock image of the recovery and put it in the storage and flash it with the app. Get the update.app ready too (in dload folder) on the storage too and try to reboot in recovery.
Sent from my SM-G850F
tileeq said:
If you have custom rom up then you probably have root too. So try this: get an app called rashr from store and allow it root permisions, then get the stock image of the recovery and put it in the storage and flash it with the app. Get the update.app ready too (in dload folder) on the storage too and try to reboot in recovery.
Sent from my SM-G850F
Click to expand...
Click to collapse
As I stated its not flashing recovery thats the problem
Thanks for all your help turns out it was the wrong TWRP lol

Error: Boot certification vertify; TWRP and Fastboot

Hi guys,
This day I flashed a new rom with my g3 (I went form Claudy 2.5 to Flumics 2.7). Flashing goes fast and without any problems, phone boots normal. Then I decided to look up a few things in the rom. I searched and found a point named devic hidden menu (I did not insert a nummber in the dialer). I clickt at it and get in the normal hidden menu. I read the textes there and found one interesting, i hope i rember it right, it was called devic test. So I clicked on it and then bad thinks started.
My phone rebooted, but in the start screen my phone stuck and in the upper right corner i can read:
Error: Boot certification vertify
Secure booting error
Cause: Boot certification vertify
Afer that the led started blinking red and blue.
I have Fastboot mode enabeled and I can get into Recovery (TWRP). So I tried to fix it with flashing my cloudy nandroid backup, wipe everything and to flash a "New" Flumics 2.5 Version, but it didn't worked.
I knew (and I read) Threads about topics like that, but im not sure if they can help, I need you're help guys! How can I fixs this, should I try to simply fash a stock rom?
NuteGunray said:
Hi guys,
This day I flashed a new rom with my g3 (I went form Claudy 2.5 to Flumics 2.7). Flashing goes fast and without any problems, phone boots normal. Then I decided to look up a few things in the rom. I searched and found a point named devic hidden menu (I did not insert a nummber in the dialer). I clickt at it and get in the normal hidden menu. I read the textes there and found one interesting, i hope i rember it right, it was called devic test. So I clicked on it and then bad thinks started.
My phone rebooted, but in the start screen my phone stuck and in the upper right corner i can read:
Error: Boot certification vertify
Secure booting error
Cause: Boot certification vertify
Afer that the led started blinking red and blue.
I have Fastboot mode enabeled and I can get into Recovery (TWRP). So I tried to fix it with flashing my cloudy nandroid backup, wipe everything and to flash a "New" Flumics 2.5 Version, but it didn't worked.
I knew (and I read) Threads about topics like that, but im not sure if they can help, I need you're help guys! How can I fixs this, should I try to simply fash a stock rom?
Click to expand...
Click to collapse
It happens to me some days ago, I just flashed again the stock rom in download mode (KDZ file) and fixed.
Did you tried that method?
Brunoruanvd said:
It happens to me some days ago, I just flashed again the stock rom in download mode (KDZ file) and fixed.
Did you tried that method?
Click to expand...
Click to collapse
No I didn't tried this method. I just flashed the the custom Rom again and used my backup. But I will try your method tomorrow . Did you used the LG fash Tool?
Just dirty flash your rom again
xarcom said:
Just dirty flash your rom again
Click to expand...
Click to collapse
This doesn't work, I can dirty flash it via twrp yeah, but when I reboot the system then I'm still stuck and get this error.
Should I try a stock Rom??? What do you think?
NuteGunray said:
No I didn't tried this method. I just flashed the the custom Rom again and used my backup. But I will try your method tomorrow . Did you used the LG fash Tool?
Click to expand...
Click to collapse
I used Lg Flash tools when it happen to me some time ago.
Sent from my LG-D852 using Tapatalk
jonnyszt said:
I used Lg Flash tools when it happen to me some time ago.
Sent from my LG-D852 using Tapatalk
Click to expand...
Click to collapse
Can I use LG Flash tool? I´m not sure because I have fastboot mode enabled?
Hello
is your download mode working ? flashtool is for download mode only.
What is your issue ? (I mean how did you brick and what version + variant ? -os, version)
bender_007 said:
Hello
is your download mode working ? flashtool is for download mode only.
What is your issue ? (I mean how did you brick and what version + variant ? -os, version)
Click to expand...
Click to collapse
I´m not sure that he works, when I press volume up + power button and then connect it via usb to my pc my pc makes a noise like you´re plugging in a usb stick but I don´t see at the pc. On my phone I don´t get this "download mode information". When I go in TWRP and click on reboot "bootloader" I get into fastboot.
My issu is that I maked a device test, my phone rebootet an now it don´t boot any more, I just get to the lg logo and then I´m gettint this error. Then 2 or 4 sec later the led starts blinking and screen turns of.
This is my rom Flumics 2.7 . I thing it is based von V21c.
Wait, you can go to twrp ?
As for download mode, it's "hold volume up and connect", no power key..
Poslano sa mog LG-H815 koristeći Tapatalk
bender_007 said:
Wait, you can go to twrp ?
As for download mode, it's "hold volume up and connect", no power key..
Poslano sa mog LG-H815 koristeći Tapatalk
Click to expand...
Click to collapse
Yeah i get into twrp, but when I try to use my backup it doesn´t work, when I reboot afer it I´m still stuck.... . Oh yeah ok when i hit yolume up an connect I also get into fastboot mode.
Ok, I take it you're on d855. I'll make you a flashable to fix it. Have you try installing a rom via twrp instead of pulling backup ?
bender_007 said:
Ok, I take it you're on d855. I'll make you a flashable to fix it. Have you try installing a rom via twrp instead of pulling backup ?
Click to expand...
Click to collapse
Yeah i´m on d855. I tried to install the flumics rom again, but it didn´t worked, when i reboot I still get stuck at the lg logo with this error.
You are my hero when your flashable zip will work!
It's actually not flashable. You will have to run it on pc when phone is in fastboot mode.
download this and run it
you will have your download mode back and you can flash kdz/tot file or use lg mobile support tool
Poslano sa mog LG-H815 koristeći Tapatalk
bender_007 said:
It's actually not flashable. You will have to run it on pc when phone is in fastboot mode.
download this and run it
you will have your download mode back and you can flash kdz/tot file or use lg mobile support tool
Poslano sa mog LG-H815 koristeći Tapatalk
Click to expand...
Click to collapse
Ok, just restored my download mode succesfully with your tool, now downloading a kdz for lg fash tool 2014.
NuteGunray said:
Ok, just restored my download mode succesfully with your tool, now downloading a kdz for lg fash tool 2014.
Click to expand...
Click to collapse
see ? No panic
bender_007 said:
see ? No panic
Click to expand...
Click to collapse
It Work "Android is Upgrading" Yeah Yeaaah :victory: ! Thank you so much! I thought destroyed my phone, but you saved me thank you so much. :good:
NuteGunray said:
It Work "Android is Upgrading" Yeah Yeaaah :victory: ! Thank you so much! I thought destroyed my phone, but you saved me thank you so much. :good:
Click to expand...
Click to collapse
No problem
cheers

Categories

Resources