So Im in desperate need of at least one more Wall charge for my galaxy note 8.0 and Galaxy S4. The only problem is they're either pretty expensive for the more legit products, or sketchy. I just need the white box part that goes into the wall outlet. SO incredibly embarrassing and frustrating that I can't seem to figure out what it's actually called. In any case, through my searches I found this:
Qmadix 4.4A USB Triple Travel Charging Hub
It allows for three ports, but each port is designated differently. well, okay... two are the same (1A), but ones different (2.4A). I have no clue about electricity, except to know if you don't use the samsung recommended converters it could damage the battery in the long run. Im under the impression that both of my devices require 2.0A. Does this mean only the 2.4A port would work?
Is anyone familiar with this Item Ive listed? Could I use this device to power bot my Galaxy Note 8.0 AND Galaxy S4 at the same time?
It seems like such a great deal and very compact. Can't pass up without at least asking about it.
again, Im asking about the:
Qmadix 4.4A USB Triple Travel Charging Hub
This is what you NEED to get: http://forum.xda-developers.com/showthread.php?t=2608578
vectron said:
This is what you NEED to get: http://forum.xda-developers.com/showthread.php?t=2608578
Click to expand...
Click to collapse
I appreciate the reply. I had actually seen that and immediately fell in love... but I just as quickly wrote it off because of the additional cable thats required to plug it into an outlet. I need something more compact... something with collapsible prongs.
Another one I was looking at is this one iXCC Dual USB 4.2 Amp (20 Watt) SMART High Capacity AC Travel Wall Charger...
Any thought?
Ports listed as 1A might still be able to supply 2A for your phone, but they might be right at the top of their current limiting (thus running warmer). The whole thing about using only Samsung provided charger is just to scare you off so you buy their original overpriced accessories But there is a truth to it as well, when you buy cheap stuff from ebay where they sell 1A rated outputs labeled with 2A and can run into a problem above (overheating, which causes short, which can cause a damage to your phone). Anker is a trusted brand with a decent quality control, RAVPower is good, and I heard of QMadix before as well.
Here is a problem. When you are dealing with wall outlet converters with multiple outputs that carry a lot of heat/power, you are too close to the main electrical outlet. So, I would be careful not too overload these. Maybe using 2 devices plugged in at a time is ok, but NEVER 3 at a time. When you have something like that 40W Anker converter, you are placing it away from the outlet, it exposed to air circulation from every side (cooling it better), and it should have some fuse or internal protection in case of a short. I understand, for convenience you need wall converter that plugs in, but make sure you get a double one, not the triple output one because i would consider those to be not as reliable when you are charging 3 devices at the same time while plugged into a single wall outlet directly.
Anker also make this one: www.amazon.com/Anker®-4-Port-Charger-Travel-Adapter/dp/B00EI8SS4U/ - but I would not load more than 2 ports at a time. Or if you load 3 or 4 ports, make sure it's not overnight when you are sleeping and that all 4 charging devices are not drawing max current
Btw, one quick question... The Anker 40W 5-port USB wall charger... Should I only charge 2 devices at a time with it aswell? or was that referring only to chargers that plug directly into the wall because of the heat issue?
varxtis said:
Btw, one quick question... The Anker 40W 5-port USB wall charger... Should I only charge 2 devices at a time with it aswell? or was that referring only to chargers that plug directly into the wall because of the heat issue?
Click to expand...
Click to collapse
You can use all 5 ports on that one (40W version that doesn't plug into wall outlet directly). That how I do it all the way, mostly using 4 ports at once to charge my Note 2, my Metawatch smartwatch, my mp3/DAP player, and external battery. Sometime also add my wireless headset too
Related
Any suggestions on an external battery? Woudl hate to buy battery with the wrong rating, have been using one for when I travel to charge my phone at least 3 times when away from a socket especially overseas
Docsboard said:
Any suggestions on an external battery? Woudl hate to buy battery with the wrong rating, have been using one for when I travel to charge my phone at least 3 times when away from a socket especially overseas
Click to expand...
Click to collapse
Needs to be able to supply 2A.
Tab will not charge unless it sees D+ and D- shorted together at about 1.24 volts (See the "make your own cables" thread and the "universal charging adapter" schematic)
I believe the Tab's internal battery is something like 6-7 AH. So the external battery will need to be a 8-9 AH Li-Ion to get one full tab charge (Charging isn't 100% efficient). That's around 4 18650s.
Don't have the expertise to make own cable, has anyone bought any external battery they can recommend?
I've used one for my phones for 3 years, I just change the cable and get 3 charges per full charge, a life saver for a frequent traveler
Sent from my GT-P7510 using Tapatalk
I think there's a universal charging adapter available from DealExtreme - I don't have the link, read through some of the other charger threads. Might try searching DX for "P1000"
I have a PhoneSuit Primo Power Core. It's a 7000mah battery that comes with charging adapters for several devices including the Tab. Works great.
URPREY said:
I have a PhoneSuit Primo Power Core. It's a 7000mah battery that comes with charging adapters for several devices including the Tab. Works great.
Click to expand...
Click to collapse
Just got it from FRY'S for $99, love it, only beef, wish it used a standard USB wall charger , hate to have too many chargers
Does anyone know if energizer xp8000 would work fine with the tablet?
here is the link
http://www.energizerpowerpacks.com/vn/products/xp8000/
URPREY said:
I have a PhoneSuit Primo Power Core. It's a 7000mah battery that comes with charging adapters for several devices including the Tab. Works great.
Click to expand...
Click to collapse
Can you clarify what you mean by "adapters ... including the Tab"?
I picked one up from Fry's and it works, but it requires me to use my Samsung cable that came with the tablet. I can trickle charge that way, and it does come with an adapter that provides the proper resistance to get the tab into "AC" charge mode, but there is no GT specific cable in the kit.
Is there another version that does come with a GT specific cable?
And does it need the resistance adapter?
flarbear said:
Can you clarify what you mean by "adapters ... including the Tab"?
I picked one up from Fry's and it works, but it requires me to use my Samsung cable that came with the tablet. I can trickle charge that way, and it does come with an adapter that provides the proper resistance to get the tab into "AC" charge mode, but there is no GT specific cable in the kit.
Is there another version that does come with a GT specific cable?
And does it need the resistance adapter?
Click to expand...
Click to collapse
Mine came with several adapters that works with various devices including my Tab. It had a USB cable with a round opening at the end and the adapters slide into the end of it. You might contact the company if yours didn't come with it..
URPREY said:
Mine came with several adapters that works with various devices including my Tab. It had a USB cable with a round opening at the end and the adapters slide into the end of it. You might contact the company if yours didn't come with it..
Click to expand...
Click to collapse
Yes, mine came with that cable and a bunch of adapters including one that looked close but just wouldn't fit into the tab's slot so I assumed it was for iThings. I'll try it again and check the company's support site...
Hi all,
I lost my charger unfortunately.
I did search around but found amazon out of stock.
Where can I buy the charger.
Thanks.
drpratik said:
Hi all,
I lost my charger unfortunately.
I did search around but found amazon out of stock.
Where can I buy the charger.
Thanks.
Click to expand...
Click to collapse
http://www.amazon.com/Motorola-SPN5...SKM8/ref=sr_1_1?ie=UTF8&qid=1312842851&sr=8-1
http://cgi.ebay.com/Car-AC-Charger-...758129?pt=PDA_Accessories&hash=item588f078a71
Thanks a lot.
ANY charger that puts out 1000mA will work with it. Motorola makes "travel" wall chargers that sometimes go on sale for a buck, and have the plug folding into them so it takes less space in a bag. As long as it has a micro-USB plug or takes your USB cable, it will work, does not have to be specific for the phone.
The whole idea of microUSB chargers is part of a larger EU plan to allow for standard chargers with microUSB tips, so you can replace your cell phone but "never" have to replace the wall wart for it.
Just check the power output, most of the Motorola chargers put out 1000mA now because some phones with big batteries (like the Atrix) can use that power to charger quickly. Lower power rating, longer charge times.
You read my mind,
It was just the info I wanted to know.
Thanks.
Bear in mind though, not all micro usb chargers work on atrix. I have a few that dont work but work fine on my other stuff. Im not sure why though. I have an external battery that worked with my nexus one but not my atrix.
I voided my warranty.
Rred said:
ANY charger that puts out 1000mA will work with it.
Click to expand...
Click to collapse
The one that comes with the phone in the US is 800ma actually. But as you said, 1000ma would charge it faster.
My atrix charger died so I'm currently using a blackberry charger with 750ma output. The iphone charger works too but it's a slower charge.
Whaddayaknow. The one supplied with my phone says 850mA, the one supplied with my bt earbud is 1000mA. Maybe someone at Motorola is paying attention to profits.<G>
But this is all part of why he industry is moving to standard chargers and why "all" standard chargers should work with standard phones. If a charger doesn't work with this phone, odds are it is too low power or simply a cheap piece of Chinese quality control which has one or more broken contacts in it.
I've gotten USB cables that have the same problem, charge or data not both. that isn't by design but at least one of the four wires in them was broken. Cheap cables is cheap cables--and I've seen cheap cables shipped as OEM from brand names.
Like cables from WD and possibly Moto that have the USB log on the wrong side of the plug--which means they are not entitled to use the logo at all, and the maker does not understand the USB spec.
If you live near a hotel, walk in and say that you left your phone charger in one of the rooms. They usually have boxes of forgotten chargers.
Thanks all for your help.
I started using lg micro USB charger which gives 700 ma.
Will get original one as well.
Thanks again.
Sent from my MB860 using Tapatalk
Go to monoprice.com and grab a dual USB / 3 port electrical outlet for like 3 bucks. Then stock up on 6-10ft micro USB cables for a buck a piece.
Sent from my MB860 using XDA Premium App
Nice idea.
Will surely check out monoprice,
Sent from my MB860 using Tapatalk
What is the best solution for quick charging the Galaxy Nexus in an automobile?
I have started to use 12-220 volt converter so I can use wall chargers.
I have bought a few of the low profile car usb chargers but they were never recognized as an AC charge. Come to find out, it was the USB cable. I bought a usb charging cable from Amazon last week and it goes in the USB charger and the phone does not think it is a USB charge. I have not timed it but it is recognized the same as the wall charger.
http://www.amazon.com/gp/product/B003VYBCAY
ellisz said:
I have bought a few of the low profile car usb chargers but they were never recognized as an AC charge. Come to find out, it was the USB cable. I bought a usb charging cable from Amazon last week and it goes in the USB charger and the phone does not think it is a USB charge. I have not timed it but it is recognized the same as the wall charger.
http://www.amazon.com/gp/product/B003VYBCAY
Click to expand...
Click to collapse
+1 .. this solution has been working great for me, as well.
I've been getting 2.1A car chargers (look for ones for the iPad), most of the ones I had prior to this were 700mA or so and they can't keep up with my 1A phones. Be careful of dual port chargers advertising 2A, they may only be 1A each and may be "optimistic" about that rating. And don't worry about getting one rated for too much current, the Galaxy Nexus won't pull more than an amp no matter what the charger rating.
Some really good solutions here and thank you all for the help.
I'd really hate to use an inventer in my car just to maintain a clean install, so that really isnt an option for me.
Was really hoping to be able to use a off the shelf car charger with the correct pins to trick the GNexus into thinking that it was charging from a USB port, but the above solution should work well with using a socket USB charger.
I've never run into a car adapter that looks like a USB port, including the VZW charger with a spare port or the cheap 2.1A chargers I got from Amazon. My guess is that a charger not built correctly and leaving the data pins open only supports ~500mA anyway. Even if that's not the case I have a moral objection toward buying a cable to fix a design flaw in another cheap product - but that's just me
Grant H said:
Some really good solutions here and thank you all for the help.
I'd really hate to use an inventer in my car just to maintain a clean install, so that really isnt an option for me.
Was really hoping to be able to use a off the shelf car charger with the correct pins to trick the GNexus into thinking that it was charging from a USB port, but the above solution should work well with using a socket USB charger.
Click to expand...
Click to collapse
I've got a charger similar to http://www.ebay.com.au/itm/USB-Car-...ccessories&hash=item4ab18358f4#ht_1638wt_1392
All I had to do was undo the screws at the top, put a bit of solder between the middle usb pins, and my phone recognises it as a AC source rather than USB.
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Grant H said:
What is the best solution for quick charging the Galaxy Nexus in an automobile?
Click to expand...
Click to collapse
Make sure the charger has the IC (rapid) chip. I use this one:
http://www.amazon.com/Motorola-Vehicle-Adapter-micro-USB-Charger/dp/B000S5Q9CA
I've heard that Motorola one mentioned a lot as a good one.
The nice thing about having the low-profile usb plug is (a) it is low profile, (b) I can use it to charge other devices. The charge-only cable is only about $4, so I had no issues buying it to work with this to charge as an AC charge over a USB charge.
Grant H said:
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Click to expand...
Click to collapse
I have this one and it charges just like it does from the home outlet and its says "AC" charging. I bought another 8 for family and friends and they all love it.
I think I've figured out the disconnect, I've run into chargers that appear as a USB host which limits the charging to 500mA on previous phones I've had.
You guys are concerned about USB vs. AC charging mode. Of the chargers I've got, this one lists as AC while the rest as USB. However, the fact that the other chargers all work just fine keeping up with GPS+streaming music indicates that the USB vs. AC really has no bearing on the charge current delivered. I'd stay away from charge-only cables just because they'll get mixed in with your standard USB cables and you'll knock yourself out wondering why they don't work. On the other hand, if you really want AC in your battery info order the one I linked.
I keep it in my car... i think I've heard on other threads that USB charging doesn't keep up with GPS (for Directions). Any verify?
Sent from my Galaxy Nexus using XDA App
TheKaz said:
I keep it in my car... i think I've heard on other threads that USB charging doesn't keep up with GPS (for Directions). Any verify?
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
What's much more important is the rating on the power source. The GN can pull up to 1000mA, if your charger is only rated for 800mA (like many car chargers) it doesn't matter if it's in AC mode.
jdbower said:
What's much more important is the rating on the power source. The GN can pull up to 1000mA, if your charger is only rated for 800mA (like many car chargers) it doesn't matter if it's in AC mode.
Click to expand...
Click to collapse
makes sense.. the one I use has dual usb (1.0 and 2.1)
You went and gave me a project for the weekend, and once again science prevails over anecdotal evidence. I took each of my 5 chargers and hooked them up to a 12V power supply that measures current. I then recorded whether the charger reported AC or USB, for the ones with USB I modified a right-angle adapter to short out the data pins, and I measured the current. The contenders:
Verizon Wireless Dual Charger
XTG Dual Port Charger
Griffen Powerjolt Dual USB Charger
Griffen Portjolt Micro
CostMad Dual USB Charger
The VZW model was USB out the external port as I had tested before, however AC out the built-in cable which I hadn't bothered to test. It pulled 0.25A @12V via the USB port and 0.59A via the cable. Hmmm... A hole develops in my previous observation. While I had used this on a long car trip with no issues, it was via the built-in cable.
The XTG was new, I hadn't used it before as it's in the car I rarely drive. It reported USB and 0.22A. With the adapter to make it report AC it pulled 0.48A.
The pattern was set. I had expected the Griffen adapters to be built more appropriately but the dual charger reported 0.22A without the adapter and 0.42A with. I had used this without losing charge in the past so this was surprising to me, but it's possible I just wasn't drawing as much current because the screen was dimmer or something.
The compact Griffen adapter (which is great for a laptop bag, BTW) pulled 0.21A and 0.47A respectively.
The cheap CostMad adapter was the only one that performed well out of the box, both reporting AC and pulled 0.57A.
In theory, a perfect adapter should pull 0.42A. Anything more is waste, anything less means it's not keeping up. I have doubts about the Griffen 2x allowing for a full amp, but the VZW and CostMad chargers are pretty lossy. What's even worse is that I'm pretty sure the VZW charger is rated for 800mA (but I can't find an actual spec on it) which would mean that it pulled the most power for the least current. Not that this really matters unless you've got an electric car.
Sorry for misleading you earlier, I should have checked the other port of the known-good VZW charger and probably doublechecked the numbers on my other "known good" charger. Still hating cables that work for charging but not for data, I ended up modifying each of the chargers to short the middle pins (except for the VZW one). If I didn't have the soldering iron for this, I probably would have gone for some of these instead.
Grant H said:
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Click to expand...
Click to collapse
CyberPunk7t9 said:
Make sure the charger has the IC (rapid) chip. I use this one:
http://www.amazon.com/Motorola-Vehicle-Adapter-micro-USB-Charger/dp/B000S5Q9CA
Click to expand...
Click to collapse
I'm using the same one and it works perfect. Charges even when GPS navigation is running.
Make sure you select Amazon as the seller though. I heard there are a lot of fake ones.
Grant H said:
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Click to expand...
Click to collapse
+1 to those recommending this one. I have this exact model and it does indeed charge at the "AC" rate, about twice as fast as the "USB" rate.
TheKaz said:
I keep it in my car... i think I've heard on other threads that USB charging doesn't keep up with GPS (for Directions). Any verify?
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
The Motorola one will charge even when using GPS. I have a friend I bought one for that uses his GPS all day and loves the Motorola charger.
So I'm looking to buy some additional chargers for my OPO. But unfortunately you cannot buy the official charger seperatly. Are there any 3rd party chargers that work just as well? I have a few at home that just don't seem to charge the phone fast enough (also, I think it does not hold the charge as long with these chargers, but that could be the placebo effect.) What should I be looking for in a good charger? Is the wall piece more important that the USB cord. Does the type of USB cord even matter if the wall piece has the right "specs". Any suggestions for chargers to buy (preferably on Amazon since I have Prime).
Thanks for the help!
Definitely look got chargers with high A. I noticed that on my old chargers were the A was 1.3, it would not charge the phone or would charge very slowly. The stock charger is great, I use a different USB cable so it's longer in length.
http://forum.xda-developers.com/goo.../hands-best-fastest-cheapest-nexus-5-t2729066 is a good charger, for $5 you can get two of them. They're 1.8A slightly less than the stock oneplus one charger but works very well and the length is very long and is cheap.
Sent from my One using Tapatalk
zephiK said:
Definitely look got chargers with high A. I noticed that on my old chargers were the A was 1.3, it would not charge the phone or would charge very slowly. The stock charger is great, I use a different USB cable so it's longer in length.
http://forum.xda-developers.com/goo.../hands-best-fastest-cheapest-nexus-5-t2729066 is a good charger, for $5 you can get two of them. They're 1.8A slightly less than the stock oneplus one charger but works very well and the length is very long and is cheap.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
What is the stock details of the OEM chargers? Not got mine yet and I usually use some old HTC chargers which are 5V/1amp
Cool, thanks man.
I just used that link and unfortunately ( I found more for a few more $ but I can wait.) they are unavailable at this time but ill keep my eye open.
EddyOS said:
What is the stock details of the OEM chargers? Not got mine yet and I usually use some old HTC chargers which are 5V/1amp
Click to expand...
Click to collapse
5v=2a
yeah most of mine are around 1a
The galaxy S4 and up chargers are 2A. If you can find some around somewhere.
The OnePlus charger is a 2A 5V part and the included USB cable charges it relatively fast. However, the small length of the cable pissed me off.
I ended up getting 2 of these - http://www.siig.com/it-products/it-accessories/mobile-phone-accessories/3-1a-ac-dc-usb-charger.html . It has a little 1A USB charge port addon for use in the car's 12V port. The main USB port on the charger is a 2.1A port if I remember correctly. Charges as fast or faster than the OnePlus charger included.
The charger has a little removable two-prong plug (like the Apple chargers) and you can stick any random two-pin power cord on this end, basically giving you as much length as you need. That's what I liked a lot about these. Annoying thing though is the blue LED, a bit bright but nothing electrical tape won't fix.
EDIT: Use any charging-only cable, one of the Samsung 2A cables or the Oneplus One cable itself for fast chargng.
I just got this: http://www.amazon.com/gp/product/B00GTGETFG/ref=oh_details_o00_s00_i01?ie=UTF8&psc=1
and this: http://www.amazon.com/gp/product/B004GF8TIK/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
coupled they are killer. The anker hub is amazing...will provide PLENTY of power to anything plugged into it, and the mediabridge cable is 24 AWG, so it can handle the 2amp that the phone requires...plus it's very long.
the blackberry playbook chargers work great. they have long cords and are < $5 on amazon.
i ordered these: http://www.amazon.ca/gp/product/B00K8HY132/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
they charge fast and work well.
I bought Blitzwolf 3A USB-C cable which I am using in my car with Android Auto & my HTC 10.
While I am switching to 1+3t I am thinking if I can still use same cable for Android Auto+charging in car
Any ideas?
The cable should be fine, but it will be trickle charge. Only the dash chargers provide quick charging.
I got this one for $6 on Amazon and it's Benson approved. I also brought a few Otium adapters, which sell a pair for $7 and of course Benson approved. They are so small, so I just have them all over the place. One in a bag, one in the bedroom, one in the car, and one in the office. If anyone found a good Benson approved USB-C cables that sell in packs with at least one 6ft, please share.
I bought a pack of these: https://www.amazon.com/AUKEY-Adapter-Type-C-MacBook-Google/dp/B01ANLA6OU/ref=sr_1_5?ie=UTF8&qid=1480436320&sr=8-5&keywords=usb+b+to+c+adapter which work ok and I didn't have to buy all new cables, at least for now. I will eventually get a new cable though.
GiSS88 said:
I bought a pack of these: https://www.amazon.com/AUKEY-Adapter-Type-C-MacBook-Google/dp/B01ANLA6OU/ref=sr_1_5?ie=UTF8&qid=1480436320&sr=8-5&keywords=usb+b+to+c+adapter which work ok and I didn't have to buy all new cables, at least for now. I will eventually get a new cable though.
Click to expand...
Click to collapse
These allowed you to trickle-charge via standard microUSB, correct? I have a 3T on the way, and I don't look forward to being chained to one charging cable.
donalgodon said:
These allowed you to trickle-charge via standard microUSB, correct? I have a 3T on the way, and I don't look forward to being chained to one charging cable.
Click to expand...
Click to collapse
Yes, they work fine. Description states it also has a 56kOhm resistor to prevent damage, but I don't really have any way of testing. I generally only use it as a backup at this point.
GiSS88 said:
Yes, they work fine. Description states it also has a 56kOhm resistor to prevent damage, but I don't really have any way of testing. I generally only use it as a backup at this point.
Click to expand...
Click to collapse
I had a Oneplus One and the only thing that broke on it was the charging cable, so being tied to one cable gives me pause.
Always go for high-quality well known and reviewed usb-c cable's. As dash charge uses 4 Amps+ you will definitely need a high gauge cable (thicker copper wires) to safely carry that amount of current. Tell tail signs of cheap cables are obviously slow charging but the worse case is a buildup of heat and short out of the cables. Braided also tend to have higher wear and fraying resistance. I went for one of these Anker PowerLine+ USB-C to USB
https://www.amazon.co.uk/dp/B01GN0M6NE/ref=cm_sw_r_cp_apa_O6jwyb6S54SRJ
LMcR92 said:
Always go for high-quality well known and reviewed usb-c cable's. As dash charge uses 4 Amps+ you will definitely need a high gauge cable (thicker copper wires) to safely carry that amount of current. Tell tail signs of cheap cables are obviously slow charging but the worse case is a buildup of heat and short out of the cables. Braided also tend to have higher wear and fraying resistance. I went for one of these Anker PowerLine+ USB-C to USB
https://www.amazon.co.uk/dp/B01GN0M6NE/ref=cm_sw_r_cp_apa_O6jwyb6S54SRJ
Click to expand...
Click to collapse
Yeah I just got one of these but Dash charging doesn't work. Might buy an extra from oneplus and reverse engineer and make my own.
I did discover the 1+3T slurps 1.5A (voltage drops to 4.6V)out of my desktop-PC USB2.0 socket when no data-connection is provided, and nicely reduces the current to 495 mA when connected to USB.
This with original dash-cable and Legion meter. I did not try for long though, as my mainboard is only rated for 1A.
From a good high current (IKEA) 3 x 2.1 A adapter it also takes 1.5A, with no voltage drop. So it looks to me that the phone is charging with 1.5A unless a dashcharger is directly connected, or reduced to 0.5 A when connected to USB.
When connected through my Legion meter, it will charge with 1.5A even if connected to a dash-charger.
From the cable-tables, you can select AWG 23 for 4.7A, AWG 27 for 1.7A and AWG 32 for 0.53A, so there is quite a difference
donalgodon said:
I had a Oneplus One and the only thing that broke on it was the charging cable, so being tied to one cable gives me pause.
Click to expand...
Click to collapse
If you want to be able to quick charge you will be tied down to the stock cable. I have an abundance of USB-C cables that I used to use with my Nexus 5X (charged at 2.3A on average) and none of those cable come close to charging the OP3T at 4A. I usually get around 1.4A when using 3rd party cables.
Gor this one in AliExpress, dash working and fast delivery to Spain https://es.aliexpress.com/item/100-...-Flash-Charging-USB-Wire-For/32708785156.html
I bought this before 3 months https://www.aliexpress.com/item/Ori...32695530105.html?spm=2114.13010608.0.0.nTY2Iz support dash
Also seeing about 1.5a while using high quality cables and powerful charger...tested using Ampere. Just glad that this is my first android phone that I don't need to charge throughout the day.
Previous phones: mytouch4g, s2, note 3, note 4, note 5.... Never really put the 6p through its paces.
Sent from my ONEPLUS A3000 using Tapatalk