QMAT - QC Mobile Analysis Tool
What is it ?
It is a development and debugging tool for Qualcomm mobiles - the only tool you'll ever need for research and development.
Who may need it ?
Mobile engineers / reverse engineers / cryptoanalysts / forensics
Crypto Functions :
- Calculate CRC-30, CRC-32, SHA1, SHA2 (SHA224 + SHA256), MD4 and MD5 of any file
- Bruteforce bytes to fit CRC-30 needed when qcsblhd_cfgdata.mbn was edited
- Decrypt and Encrypt any RSA-Message, including ASN-1 / SHA Signatures. (you can add publickeys to publickeys.xml)
- Calculate TEA/XTEA/DES/RSA in various modes (ECD,CBC,OFC, etc..)
- Generate RSA Private Key and create .pvk files
- Check firmware signature given Modulus and Exponent (for HTC and BQS mobiles)
- Extract information from .pvk files
- Search for algorithms in binary files (find cryptomethods + signatures) CRC8, CRC16, CRC32, MD4, MD5, SHARK, HAVAL, GZIP, ZIP, SHA1, ... and much more (you can add cryptosignatures to crypto.xml)
- Search for qc standard functions in binary files
JTAG Interface :
(soon via Segger J-Link)
Functions for QC mobiles :
1. Load binary files for :
Extraction of certificates
Extraction of BMPs,GIFs,PNGs, JPGs
2. Load Partition File to get overview about NAND/NOR structure
3. Send any String to a COM/USB Port and backup all your SMS !
4. Make usage of QCs Diag USB/COM Port Interface
(Useful for any QC mobile in the world)
5. Find SP and SPC and several other codes
6. CDMA Parameter Editor
Standard Features :
- Send standard diag commands or any hexadecimal command you want (database included)
- Read out all NVItems (range given)
(all that exist, more than QPST normally extracts)
- Backup and Restore all NVItems
- Read out and Dump Firmware in Memory (SRam)
- Read out complete EFS
- Switch to FTM Mode (or anything else you want)
- Get infos about phone, codes ..... etc ..... a lot more functions
- Generate SimSecure Command to write to SimSecure using given file (may brick your phone when used without knowledge)
- Full Feature EFS Browser
Bootloader / DownloadMode Features :
- Load any file to mobile at any address and execute (bootloader f.e.)
- Read out complete NAND Memory using bootloader (range given) with included MSM6250/A bootloader or any given bootloader
Usage : Take out battery, put in battery, press ON # to enter emergency mode, Execute Loader
or (with SL91,SF71 f.e.) enable FTM mode, Execute Loader
- Use any Download Mode or Bootloader Command to experiment
- Read application memory of newer Diag Ver 6 in Download Mode
- Show complete infos about used NAND after loading of Bootloader
Flasher Features :
Flash any QC mobile (OBL Multiboot) with given bootloader
- Flash PBL (dangerous), QCSBL, QCSBL Header and Config Bits, Partition, OEMSBL, OEMSBL Header, AMSS, AMSS Header and EFS
Functions for BQS only :
1. Load AMSS to extract files or useful infos
(EF81, E81C, EF91, SXG75, EF82, SF71, SL91 or similiar ones)
Features :
Extract Infos from AMSS : USBID, Product.Nr., SVN, SwBuild, Mobiletype
Extract internal filesystem (mif,bar,sig etc. files)
Extract AMSS signature bytes (if production key)
Show all file references used by mobile
2. Check Firmware validity (signature)
3. Sim_Secure extraction/decryption (non-public)
4. Master-/Usercode/Unlock extraction and direct unlock (non-public)
Functions for HTC only :
1. Check validity of HTC firmware (signature check)
2. Cut out signatures from .nbh file
3. Split radio.nb into qualcomm files for analysis
4. Find HTC Public keys using Cryptosearch
5. Generate Security passwords (SPL + radio) for newer HTC
6. Generate NBH Files (you can add any device into devlist.xml)
7. Dump Files from NBH (you can add any type into nbhtype.xml)
8. Fix radio.nb checksum
9. Generic Bootloader / AT Command interface with logging functions
10. Generate goldcard for older and newer htc devices (newer one non-public)
Functions for Network Engineers - registered version
Network Calculators :
TDMA (GSM/UMTS) :
--------------------
IMEI
GSM A5-1
GSM A5-2
GSM A5-3
3G ECSD
GEA3 - GPRS
3G SNOW
3G UEA2
3G UIA2
GSM A3/A8 COMP128 V1
GSM A3/A8 COMP128 V2
GSM A3/A8 COMP128 V3
3G Milenage
3G Milenage Resync
CDMA :
-------
CAVE
CAVE Authentication
CAVE CMEA
CAVE EMEA
CAVE EMEA_NF
CAVE Wireless Residential Extension
CAVE Datakey / Look Up Table / Mask
CAVE DTC / DCCH
CAVE KSG
CAVE Long Block
CAVE Short Block
CAVE Enhanced Message
CAVE Enhanced Voice Privacy
CAVE Enhanced Data Mask
and much more ....
Planned in future :
1. Bugfixes
2. EFS Restore to Zip File
3. QC Jtag interface using Segger J-Link ARM
4. LNBS HTC support to replace MTTY 5. Tooltips showing real addresses in graphical window
5. CDMA Write functions
6. Read out / Write back Addressbook
7. Restore backupped SMS to phone
8. much much more
NO UNLOCKING ! PLEASE DO NOT REQUEST. THIS PROJECT IS FOR EDUCATIONAL PURPOSES ONLY, NOT TO HARM COMPANIES FOR THEIR EFFORTS.
What we need :
- Any contribution to the project is welcome.
- Donations for new hardware and software for further development of this tool.
Link to the project files :
------------------------
Version 4.21 (Major Release) Stable
QMAT Homepage
Cya and keep on reversing,
Viper BJK
==> Donate via PayPal <==
See older threads here :
http://forum.xda-developers.com/showthread.php?p=2519683
Small update :
--------------
New version 4.22 will feature :
- DECT DSAA algorithm
- OTA SMS Tools
Cya,
Viper BJK
New version 4.22 out
--------------------
What's new :
-------------
- Added DECT DSAA Algorithm to Network Calculators
- Fixed Bug in Security Password Retrival
Cya,
Viper BJK
I am going to implement Jtag to QMAT, so we need Beta Testers.
Are you :
1. Using Segger J-Link ARM or any clone (H-Link, JT-Link, etc..) ?
2. Experienced in Jtagging ?
3. Have a phone ready to jtag using a MSM Chipset (jtag pinouts etc. available) ?
Then join the QMAT Jtag beta team, mail your JTAG Serialnumber to [email protected].
Cya,
Viper BJK
Small update :
--------------
Right now we're doing a lot of bugfixes regarding spc / sp and usercode search, but also a lot of bugfixes for efs read. EFS read will now be done fully automatically. Of course, we take bugs serious and due to official support of lg ks20 in the next qmat release, we are also fixing all those nasty timeouts that messed up some extracted data.
So right now, it's bugfixing weeks. After that we will continue on jtag interface and all other feature requests you brave people sent us.
Cya,
Viper BJK
what about KU990 (which have MSM6280)?
I guess KU990 will also be fine
But I can only give official support for ks20, as it's the only lg mobile I got here to work with.
Cya,
Viper BJK
Right now we're doing some beta testing qmat 4.23.
After all issues are fixed, there will be another great release including a lot of improvements and features.
Cya,
Viper BJK
New version 4.23 out
--------------------
What's new :
-------------
- Complete Com Rewrite, fixing timeout issues
- Read Memory in Download Mode / Display Memory Partitions in Download Mode (even ones other tools cannot download )
- Find SP password in non standard QC AMSS Firmware
- CRC30 bugfixes
- Added SP function detection
- Automatic EFS read size detection
- Usercode search / Advanced SPC search
- Official LG KS20 support
- Load QC Bootloader in HEX and get address automatically
- EFS Backup to ZIP bugfixes
- EFS Read Factory Fixes
- Bootloader NAND read bugfixes
- a lot more ...
Cya,
Viper BJK
Small update on progress :
--------------------------
"Uhoh ... bad things happen and sometimes the world isn't perfect."
This message is intended for those who work with QC EFS and QMAT.
Several ways to read out EFS exist. And the one from QMAT wasn't perfect at all. Sometimes, sniffing usb data gets you nowhere ... we had to act professional. In fact, after some heavy researches and reversing of firmware, I can now confirm that there is not only "ONE" EFS read at all.
So next version to be released will hopefully introduce two-way-efs for efs explorer to be used with all known qc types. And of course I had to write a lot of fixes for efs RAW/Factory read that I didn't knew before ....
Expect the next version 4.24 to be not only a lot more stable than all versions before ... but will also feature REAL efs dump
Cya,
Viper BJK
Small update :
--------------
Boys and girls,
version 4.24 will be really new. I rewrote complete com/usb port stack and added a lot of new features, like a new command database, gui improvements, efs generic and subsystem browsing, safe factory efs, new bootloader interface, etc....
Trust me, this version will fix a lot of crashes and hangs
To prevent any bugs still being in it, we're doing severe bugtesting right now.
Cya,
Viper BJK
As we wish to make a good working and much better QMAT,
we start a Beta Tester Program.
What advantages do you get :
- Be the first to get unofficial versions
- Be productive and make QMAT more user-friendly
- Get a discount on special modules
- Get your phone working with QMAT
- Increase your knowledge regarding qc technology
Why it is important for us :
- Make more phones work with QMAT
- Fix any existing bug and make QMAT more stable
If you're interested, please write a PM to me, with subject "QMAT Beta Tester" and a short introduction of yourself
(where you are from, if you are a user / programmer / reverse engineer, why you want to be a beta tester, what phones with qc chipsets you have to test)
Thanks,
Viper BJK
QMAT Beta Tester
viperbjk said:
As we wish to make a good working and much better QMAT,
we start a Beta Tester Program.
What advantages do you get :
- Be the first to get unofficial versions
- Be productive and make QMAT more user-friendly
- Get a discount on special modules
- Get your phone working with QMAT
- Increase your knowledge regarding qc technology
Why it is important for us :
- Make more phones work with QMAT
- Fix any existing bug and make QMAT more stable
If you're interested, please write a PM to me, with subject "QMAT Beta Tester" and a short introduction of yourself
(where you are from, if you are a user / programmer / reverse engineer, why you want to be a beta tester, what phones with qc chipsets you have to test)
Thanks,
Viper BJK
Click to expand...
Click to collapse
I saw it in the original forum and to start i'm from Bulgaria (South-Eastern Europe), interested mostly in replacing/messing around with LG's AMSS system, the bootloaders will be great, but i'm realist so the illusions are out, i have KU990 not a real reverse-engineer, but i know basic stuff (i was developing in PHP about an year) for how system works.
ceckin said:
I saw it in the original forum and to start i'm from Bulgaria (South-Eastern Europe), interested mostly in replacing/messing around with LG's AMSS system, the bootloaders will be great, but i'm realist so the illusions are out, i have KU990 not a real reverse-engineer, but i know basic stuff (i was developing in PHP about an year) for how system works.
Click to expand...
Click to collapse
Well the more beta testers we have, the better
Small update :
--------------
Version 4.24 is almost done and about to be released at the end of the week approximately. It seems it is a lot more stable and works way better than any qmat version ever before.
Finally, we were able to reverse whole EFS read, add a new alternate EFS factory read for newer MSM >8xxx, add EFS Browsing not only for generic devices but also for devices with only subsys ... and of course added features like rename directory / change modes.
Also we did some gui changes for easy recognition of diag commands.
You can now even cancel running diag processes ! *thanks to adfree for the hint*
So expect Version 4.24 to bring you great new features and more stability
Cya,
Viper BJK
New version 4.24 out !
---------------------
What's new :
-------------
-Severe Com Port fixes
-EFS alterate read for newer MSM to be released
-GUI changes - EFS Browsing
-Severe bugfixes thanks to beta testing team
-Factory EFS read
-Improved speed of Usercode/SPC search (by 0x1000)
-Button to stop current com port function
Cya,
Viper BJK
New version 4.25 out !
----------------------
What's new ?
-------------
-EFS Browse Bugfixes
-PRL Read/Write
-GUI Improvements
-Bootloader Bugfixes
-SimSecure Bugfixes
-Byte Cutter Bugfixes
-Cmd Byte for different NVItem Read
-Signature Search / SP / SPC Search improved
-EFS Raw Read Fixes
-Added option to add vendor specific commands
-Added support for newer Samsung CDMA
-Added ECC Calculation (Hamming, Toshiba, Reed Solomon)
Cya,
Viper BJK
New version 4.26 out !
----------------------
What's new ?
-------------
- Added new goldcard generation to registered users
- Implemented new registration scheme
- Added rudimentary IDC Script generation for IDA with Function/Algorithm Search (put in output directory as results.idc)
- Function/Algorithm Search is now able to use "??" instead of "FF" as wildcards in .xml files function.xml and crypto.xml
- Added new ECC algorithms
- Several bugfixes
Cya,
Viper BJK
New version 4.27 out
............................
What's new ?
-------------
- Fixed QMAT not to start on several pcs.
Cya,
Viper BJK
New version 4.28 out
.............................
What's new ?
-------------
- JTAG fixes
- Fixed encap files speed
- CID is now called Country ID (GUI improvement)
- New functions added to function-database
Cya,
Viper BJK