Related
Hey all,
ive read here now several days about updating your universal etc.
Im now quit a bit in the stuff and i wanted to upgrad my Qtek 9000 with some of these nice FWs here.
I tried Indras, helmis and another one but all dont want to start the Update.
I own an original Qtek 9000 without ANY branding, i used an official update which worked flawless 100% good!
Now any FW i choose here, gives me "Country Error" and YES i replaced the files from the directory but didnt help at all Also searched this forum alot but nothing could help me.
Also my IMEI isnt accepted at qteks website....
Any1 an idea? Do i need a special update?
Sorry for beeing dumb, but im just trying to get into this material
Greetings
--Edit--
I somehow killed my ROM and just did a hardreset and reinstalled the official upadte. worked great but still no update of these nice custom roms here
By replacing files, do you mean you used MaUpgradeUt_noID.exe to upgrade?
And before you use MaUpgradeUt_noID.exe, did you put your device into bootloader mode?
CWKJ said:
By replacing files, do you mean you used MaUpgradeUt_noID.exe to upgrade?
And before you use MaUpgradeUt_noID.exe, did you put your device into bootloader mode?
Click to expand...
Click to collapse
hello CWKJ
can u please explain how to place the device in boot loader ?
and this bootloder must be done before the rom upgrade ???
I too keep getting a country error 120
Iv replaced with the Maupgrade utility...
I am not a genies guys like mamiach and others but following procedure I do for upgrading my Universal.
>1.0 Down load your preferred ROM version and extract it on your computer. Inside extracted file you will see among others the ROM file “nk.nbf”
>1.1 Download the file: Country_ID_Error.zip and extract it to folder “Country_ID_Error”
>1.2 Copy the “nk.nbf” file from the ROM folder in to folder Country_ID_Error folder.
>1.3 Set your device in Boot loader mode with pushing button combinations “Backlight button” + “power button” + and with your styles the “reset button”
>1.3.1 Now you will observe on your device boot loader screen which is in fact almost dark screen .
>1.4 Now Connect your device to your computer
>1.5 start the installation with the file “MaUpgradeUt_noID. exe ” which is in the folder “Country_ID_Error”
>1.6 After the ROM installation is completed, hard reset your Device with button combination: power button + 1st soft key control button + 2nd soft key control button (soft key buttons are the2 xbuttons on your device keyboard with the sign of “ –“ on it)
>1.6.1 Now on your device screen you will observe the message push the button “0” for factory settings which you will follow and complete the actual hard reset.
Well you are completed the ROM upgrade and it should be everything fine. :0)
Bulldog said:
I am not a genies guys like mamiach and others but following procedure I do for upgrading my Universal.
>1.0 Down load your preferred ROM version and extract it on your computer. Inside extracted file you will see among others the ROM file “nk.nbf”
>1.1 Download the file: Country_ID_Error.zip and extract it to folder “Country_ID_Error”
>1.2 Copy the “nk.nbf” file from the ROM folder in to folder Country_ID_Error folder.
>1.3 Set your device in Boot loader mode with pushing button combinations “Backlight button” + “power button” + and with your styles the “reset button”
>1.3.1 Now you will observe on your device boot loader screen which is in fact almost dark screen .
>1.4 Now Connect your device to your computer
>1.5 start the installation with the file “MaUpgradeUt_noID. exe ” which is in the folder “Country_ID_Error”
>1.6 After the ROM installation is completed, hard reset your Device with button combination: power button + 1st soft key control button + 2nd soft key control button (soft key buttons are the2 xbuttons on your device keyboard with the sign of “ –“ on it)
>1.6.1 Now on your device screen you will observe the message push the button “0” for factory settings which you will follow and complete the actual hard reset.
Well you are completed the ROM upgrade and it should be everything fine. :0)
Click to expand...
Click to collapse
Sorry for my mistake for the paragraph 1.6 please ignore the previos 1.6 and follow the below
>1.6 After the ROM installation is completed, hard reset your Device with button combination:
1st soft key control button + 2nd soft key control button + and with you styles the reset button (soft key buttons are the2 x buttons on your device keyboard with the sign of “ –“ on it)
Looks like Bulldog has beaten me to the answer.
Copy nk.nbf to Country_ID_Error directory of copy MaUpgradeUt_noID.exe to the nk.nbf directory is the same.
thanks Bulldog
its been of great help
i figured out what the problem was.
I somehow had to flash back to an orignal rom and then only the roms here did work...
Thx for your help guys
problem entring bootloader
is there any way to flash the rom through memory card un able to enter the boot loader please help i have got struck at o2 screen
Hi all,
Just received my Vodafone-branded Diamond, and I'm afraid I already managed to brick it!
It was equipped with version "1.37.172.3 NLD" so I decided to upgrade it to the latest version.
The installation of OliNex Hard-SPL 1.93 went flawless, but the installation of ROM "RUU_Diamond_HTC_WWE-ME_1.93.456.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe" stopped at about 25% with error code 302. The recovery method that came with the package didn't help, every time the upgrade stopped at the same moment.
Since the device is stuck in the bootloader, and I'm left with a non-chargeable battery, I tried the official Vodafone-branded "RUU_Diamond_Vodafone_NL_1.97.172.4_Radio_Signed_Diamond_52.44.25.24_1.08.25.08_Ship.exe" ROM. Unfortunately, this upgrade stops at 48% and throws the same 302 error.
Anyone who can tell me what I'm doing wrong, and what I can do to solve all this?
I hope I don't have a brand new, but bricked device on Christmas!
TIA and have a nice day.
Try a hard reset first. If this doesn't help google or search at XDA for MTTY.
This tool can fix your device
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader
Try this, maybe will work
Try a Vodafone branded stock rom before mtty.
Regards,
Carty..
He already tried a stock rom....
Potential Solution
Have you looked at the thread titled,
[UPG][TRBL]How-to fix: Update/Flash doesnt work, stops at 0% or 5% (invalid model ID)
It may just be a model ID glitch that can me fixed.
Take a look. It's in this forum in a sticky by cptsunshine.
Thanks all for the help, I'll have a look at your suggestions.
The problem isn't that it stops at 0% or 5%, it stops at random percentages (depending on the ROM I use).
I also see the bootloader (red / green / blue), so it's not dead. I guess it's just that it doesn't pick up a ROM.
Besides, the bootloaders says upgrade ROM code error please try again.
Edit:
A hard reset doesn't seem to work. In the bootloader, when I press "volume down" and "enter" together, and press the "reset button" the screen goes black, but then goes back to the bootloader screen after a sec or 2.
Edit 2:
MTTY doesn't do much either, after executing "boot" the phone is showing me the Vodafone logo and that's it.
For the rest, MTTY shows me the following:
Cmd>boot
InitDisplay: Display_Chip=1
dwDirectNum: 0, dwMatrixNum: 0, dwMicroPNum: 0
Fixed new dwPSImageSize = 0x53E0000
Install Rom via Internal Memory Method
Steps from Suiller:
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Let me know how it goes.
Make sure you have Net framework 3.5 installed on devices.
Nakkie27 said:
Thanks all for the help, I'll have a look at your suggestions.
The problem isn't that it stops at 0% or 5%, it stops at random percentages (depending on the ROM I use).
I also see the bootloader (red / green / blue), so it's not dead. I guess it's just that it doesn't pick up a ROM.
Edit:
A hard reset doesn't seem to work. In the bootloader, when I press "volume down" and "enter" together, and press the "reset button" the screen goes black, but then goes back to the bootloader screen after a sec or 2.
Edit 2:
MTTY doesn't do much either, after executing "boot" the phone is showing me the Vodafone logo and that's it.
For the rest, MTTY shows me the following:
Cmd>boot
InitDisplay: Display_Chip=1
dwDirectNum: 0, dwMatrixNum: 0, dwMicroPNum: 0
Fixed new dwPSImageSize = 0x53E0000
Click to expand...
Click to collapse
u can do one thing then press woluem down and reset bottom at the same time then u go to rescue mode then u wait and put in the usb stick and there stand seriel when u put in the cable it will change to usb thenu can load the firmware again
band27 said:
Steps from Suiller:
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!
Click to expand...
Click to collapse
I wish I could mate, but I cannot put files on it anymore, since ActiveSync doesn't recognize my device when it's in the bootloader.
janielsen said:
u can do one thing then press woluem down and reset bottom at the same time then u go to rescue mode then u wait and put in the usb stick and there stand seriel when u put in the cable it will change to usb thenu can load the firmware again
Click to expand...
Click to collapse
Can you please be more specific? Are you telling me how to do a hard reset? I tried as to do a hard reset, but it goes back to the bootloader instead of resetting. USB stick?
Thanks all, much appreciated. A pain this can happen, looking at the fact that I did everything exactly as described in all these flashing manuals.
Nakkie27 said:
I wish I could mate, but I cannot put files on it anymore, since ActiveSync doesn't recognize my device when it's in the bootloader.
Can you please be more specific? Are you telling me how to do a hard reset? I tried as to do a hard reset, but it goes back to the bootloader instead of resetting. USB stick?
Thanks all, much appreciated. A pain this can happen, looking at the fact that I did everything exactly as described in all these flashing manuals.
Click to expand...
Click to collapse
first push the volum down buttom at the same time press the reset buttom then the 3 color display will appear and in the buttom will stand seriel then u putt in the usb cable to ur phone whit u have attact to ur pc then it will say usb now u can load new firmware
janielsen said:
first push the volum down buttom at the same time press the reset buttom then the 3 color display will appear and in the buttom will stand seriel then u putt in the usb cable to ur phone whit u have attact to ur pc then it will say usb now u can load new firmware
Click to expand...
Click to collapse
No mate, I never had problems getting into the 3 color screen. The problem was updating afterwards, which never completed without error code 302.
Anyway, I guess I just fully bricked my device after putting SPL-1.40.OliNex (according to the guide at http://forum.xda-developers.com/showthread.php?t=416211) on it. The SPL install was succesful, but when booting I'm now not even getting to see the 3 color bootloader. All I see is the Vodafone logo with some version numbers at the bottom, but that's it. It doesn't boot further on, and I can't get a USB-connection.
Edit:
Volume down + reset brought me in the bootloader again, although it's saying SPL-1.93.OliNex.
Nakkie27 said:
No mate, I never had problems getting into the 3 color screen. The problem was updating afterwards, which never completed without error code 302.
Anyway, I guess I just fully bricked my device after putting SPL-1.40.OliNex (according to the guide at http://forum.xda-developers.com/showthread.php?t=416211) on it. The SPL install was succesful, but when booting I'm now not even getting to see the 3 color bootloader. All I see is the Vodafone logo with some version numbers at the bottom, but that's it. It doesn't boot further on.
Click to expand...
Click to collapse
that i know but as i say in the post that when u do it that way i say u can load new firmware whitout it needs to boot try my friend i have done it 3 times because wrong loading of firmware
u have to only push thoose 2 buttom then it will work because u go to rescue mode
But what will that give me extra? I can access the Hard-SPL 1.93 bootloader (3 color screen), and I can get into USB mode. It's just that the upgrade of both firmwares stop at a certain percentage.
I'm constantly trying to hard reset the device, but after pushing the reset button (with both volumn down + enter pressed down), the device just reboots back into the bootloader and doesn't give me the hard reset warning.
Nakkie27 said:
But what will that give me extra? I can access the Hard-SPL 1.93 bootloader (3 color screen), and I can get into USB mode. It's just that the upgrade of both firmwares stop at a certain percentage.
I'm constantly trying to hard reset the device, but after pushing the reset button (with both volumn down + enter pressed down), the device just reboots back into the bootloader and doesn't give me the hard reset warning.
Click to expand...
Click to collapse
u need to hold them down until it leave the 3 color display an turns into grey
Ok, finally managed to do a hard reset. Afterwards I tried upgrading to the official Vodafone NL 1.97 ROM once more, but it failed at 48% again.
Any ideas what to do? I know have Diamond with Hard-SPL 1.93 (which says upgrade ROM code error) with no working OS.
Ok all, got it finally working again!
Don't ask me why, but flashing the newest Dutty ROM (and the included radio) did work.
Thanks for all your help, and a wonderful evening!
Hi all,
I have a quit similar problem. I've read a lot, but couldn't find an answer to my problem - may bye someone can help me.
I updated my Dimond (OliNex Hard-SPL 1.93, radio 1.09.25.23 and rom dutty V4). When I start my phone most of the time (95% plus) I end up in the color screen - however some time it's starts perfect (without changing anything).
When I get stock in the color screen, I can start the phone with mtty and the command "boot".
What can I do to make my phone always start in the normal way?
Thanks!
Nakkie27 said:
Ok all, got it finally working again!
Don't ask me why, but flashing the newest Dutty ROM (and the included radio) did work.
Thanks for all your help, and a wonderful evening!
Click to expand...
Click to collapse
i smell a radio issue - last time i was trying to upgrade my radio - ended up with something similar, managed it out like you did - but now you're up - so that's good!!
try some other rom (this time without radio) - i don't think you should have any issues going forward... good luck and have fun!
Please help!
My HTC TP2 freezes at start up with the black screen and the Touch Pro2 Logo and some details in red at the bottom:
B 80
R 4.49.25.17
G 61.44tc.25.32U
D 1.86.67102
No USB connection can be established.
What happened:
1. Tried to update from original WM 6.1 to WM 6.5 by using the official HTC ROM update utility. Seems like USB connection broke during update and update freezed at 42%. Update utility process has stopped by itself (no process visible anymore in the Task Manager).
2. Restarted phone and multicolor screen appeared and stayed. After connecting with USB cable again "USB" appeared at the bottom. Started again the HTC ROM update utility which recognized the phone and started the update process again, but stopped at the beginning with an error message stating something like the ROM is broken.
3. Restarted again (by removing the battery and hit power button) and state reached like described above (HTC TP2 freezes at start up with the black screen and the Touch Pro2 Logo and some details in red at the bottom).
4. Performed a hard reset but did not help.
What can I do to bring the phone back to life?
So you can't or can get in the colored screen now? (the boatloader)
And it's kind of normal that their nothing happens after the tp2 + red information screen, this since their is no rom to startup.
EDIT
Is it possible to tell exactly what error you got?
EDIT
Try to hard reset your device, do you know how to do this?
If not this is how to do it:
To perform a hard reset
1. With the device turned off, press and hold the TALK/SEND, END and POWER buttons until you see this message on the screen.
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel."
2. Release the TALK/SEND, END and POWER buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Source: http://forum.xda-developers.com/showthread.php?t=523083
This is just what worked for me..
Had the same issue on my tp...
Hope it will work for you.
Did already the hard reset - but this did not help as nothing changed!
One further info: whenever I insert the battery the device automatically starts up - until it freezes again at the start up.
Can someone please help?
It's normal that the device starts up when the battery is plugged in...
But this is just what I know out of my own experience.
So sorry I can't help you farther.
EDIT
Did some research you might want to try to flash your phone by micro sd... (not for sure if it helps but by some people it did work)
Read the tread about flashing at the top of the rhodium section and you know how to do it.
Did another trial: downloaded and copied a RHODIMG.nbh to the micro sd card, inserted it again and pressed volume up at startup -> colored screen appears shortly, then switches to a white screen telling "Loading..." in blue font color, but nothing more.
Is there anybody out there who can help?
Do I need a specific RHODIMG.nbh to make this approach working? I didn't flash this device before, so it has been still in the original manufacturer's state.
frieder01 said:
Did another trial: downloaded and copied a RHODIMG.nbh to the micro sd card, inserted it again and pressed volume up at startup -> colored screen appears shortly, then switches to a white screen telling "Loading..." in blue font color, but nothing more.
Is there anybody out there who can help?
Do I need a specific RHODIMG.nbh to make this approach working? I didn't flash this device before, so it has been still in the original manufacturer's state.
Click to expand...
Click to collapse
suppose 2 press down volume not up after soft reset
This may help,
Try entering bootloader by switching off device then switch back on holding down the Vol down key.
If you can enter bootloader this way then you wil be able to flash from SD card following the instructions from here
http://forum.xda-developers.com/showthread.php?t=550540
if you want to flash the Official update from HTC you can extract the Nbh from the Exe file you downloaded from them, just use winzip, Zzip or Win RAR to extract the contents from the Exe you are looking for RUU_signed.nbh..follow the above thread instructions to change the name of the file to RHODIMG.nbh.
I DONT KNOW IF YOU NEED TO HARD SPL FOR THIS..Probably better to do it than not. Can Anyone Confirm???
i hope this helps
Device is up and running again !
Could enter bootloader mode and tried first to install again via the official HTC installer -> worked!
Thanks a lot for your support!
great news welldone Bro and welcome to the forum!!!
osrix25 said:
This may help,
Try entering bootloader by switching off device then switch back on holding down the Vol down key.
If you can enter bootloader this way then you wil be able to flash from SD card following the instructions from here
http://forum.xda-developers.com/showthread.php?t=550540
if you want to flash the Official update from HTC you can extract the Nbh from the Exe file you downloaded from them, just use winzip, Zzip or Win RAR to extract the contents from the Exe you are looking for RUU_signed.nbh..follow the above thread instructions to change the name of the file to RHODIMG.nbh.
I DONT KNOW IF YOU NEED TO HARD SPL FOR THIS..Probably better to do it than not. Can Anyone Confirm???
i hope this helps
Click to expand...
Click to collapse
For future info, from what I have gathered you must hardSPl for all ROM flashes. If the ROM you flash is the stock ROM, you can also revert your SPL to stock. For any other ROM, you must leave your device hardSPL'd.
Hope I helped.
how were you able to connect the phone with the pc. i seem to have a similar problem but am finding it difficult to connect the phone to the pc. i have activesync installed but cannot connect to the phone
osrix said:
This may help,
Try entering bootloader by switching off device then switch back on holding down the Vol down key.
If you can enter bootloader this way then you wil be able to flash from SD card following the instructions from here
http://forum.xda-developers.com/showthread.php?t=550540
if you want to flash the Official update from HTC you can extract the Nbh from the Exe file you downloaded from them, just use winzip, Zzip or Win RAR to extract the contents from the Exe you are looking for RUU_signed.nbh..follow the above thread instructions to change the name of the file to RHODIMG.nbh.
I DONT KNOW IF YOU NEED TO HARD SPL FOR THIS..Probably better to do it than not. Can Anyone Confirm???
i hope this helps
Click to expand...
Click to collapse
is it possible to connect to active sync in bootloader, cos my phone cannot even boot, it freezes up with a white screen and htc logo.
After entering bootloader you can flash either way,either by ruu package provided by your ROM's maker or running official ruu release or if you have the renamed file on the root of your sd card....I never use sd card flashing and have never had a failed flash...If in bootloader it will not connect with activesync,but device should be recognized by ruu.exe
WC
Ok. First I want to thank's all of the xda team to brings us so much fun with our HTC phone. HTC makes very good machines and XDA brings it to another level of performance.
Here's my problem. I unlocked my phone, then make a hardspl. I see the confirmation of this in the tri-color screen. So by now, everything works correctly.
Then each time I try to flash a ROM with the PC (USB) it say "error 220". And when I try to flash with my SD card, and go to the booting screen, it brings my on a grey screen that offer my two choice 1) "abort with "volume less" button or 2) upgrade the ROM with "power" button. But the power button doesn't do anything. When a press it nothing happend. The "volume less" button work perfectly but only for aborting. I've try the other buttons but nothing worked. It's like the power button just doesn't work.
I've followed all the instructions given in this xda page : "Flashing your First GSM Rhodium Rom "
I have a canadian TP2 from Telus.
I somebody can help.
Put your phone in bootloader and try to flash USB. You will NOT have an active sync connection but your bootloader screen will show USB at the bottom.
Let me know
Russ
Rickforet said:
Ok. First I want to thank's all of the xda team to brings us so much fun with our HTC phone. HTC makes very good machines and XDA brings it to another level of performance.
Here's my problem. I unlocked my phone, then make a hardspl. I see the confirmation of this in the tri-color screen. So by now, everything works correctly.
Then each time I try to flash a ROM with the PC (USB) it say "error 220". And when I try to flash with my SD card, and go to the booting screen, it brings my on a grey screen that offer my two choice 1) "abort with "volume less" button or 2) upgrade the ROM with "power" button. But the power button doesn't do anything. When a press it nothing happend. The "volume less" button work perfectly but only for aborting. I've try the other buttons but nothing worked. It's like the power button just doesn't work.
I've followed all the instructions given in this xda page : "Flashing your First GSM Rhodium Rom "
I have a canadian TP2 from Telus.
I somebody can help.
Click to expand...
Click to collapse
Thank's for this suggestion but like I've said in my firt post, I've already tried this an obtain this message "error 220".
Russ741 said:
Put your phone in bootloader and try to flash USB. You will NOT have an active sync connection but your bootloader screen will show USB at the bottom.
Let me know
Russ
Click to expand...
Click to collapse
Rickforet said:
Thank's for this suggestion but like I've said in my firt post, I've already tried this an obtain this message "error 220".
Click to expand...
Click to collapse
ERROR [220] : MAIN BATTERY POWER
This error message will appear when the device's battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure that your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).
Source
Let "search" be ur best friend around here...
Like said above, batt power must be above 50%. I do believe it says so in the instructions as you flash from RUU. To get around that you can flash from sd but make sure you have sufficient power to complete. It is faster if you flash from sd anyway.
kwambewright said:
Like said above, batt power must be above 50%. I do believe it says so in the instructions as you flash from RUU. To get around that you can flash from sd but make sure you have sufficient power to complete. It is faster if you flash from sd anyway.
Click to expand...
Click to collapse
Thank you all for your help. It's more encouraging to search a solution together.
Well, now there is suffisiant power on my battery, the process seems to go well since I got a knew error message : ERREUR [226] ECRITURE MEMOIRE FLASH (my translation : "flash memory wrinting")
Rickforet said:
Thank you all for your help. It's more encouraging to search a solution together.
Well, now there is suffisiant power on my battery, the process seems to go well since I got a knew error message : ERREUR [226] ECRITURE MEMOIRE FLASH (my translation : "flash memory wrinting")
Click to expand...
Click to collapse
ERROR [226] : FILE WRITE
This could indicate that the downloaded image (.nbh file) is corrupt, re-download the image.
Redownload the ROM
DaDoctor said:
ERROR [226] : FILE WRITE
This could indicate that the downloaded image (.nbh file) is corrupt, re-download the image.
Redownload the ROM
Click to expand...
Click to collapse
I've tried to download the ROM from different sources and I also try different ROM versions. Always the same error.
Thank you for your help.
My mistake !
I'm really sorry guys. It's a begginner mistake. I realized that I have a CDMA phone so I had to find a ROM to fit this particulirity. I found a good one and it work perfectly.
Sorry to waisted your time and thank's again for your support.
Anyone can help me here? So my HTC 10 is the international unlocked version. I bought it from Amazon US and use it in Indonesia.
It worked really fine for more than a month but today something happened.
I turned off the phone and replace the SIM card. When I powered up, it shows only black screen with white htc writing in the center and "powered by android" at the bottom. After a while, there's no change other than the screen turned brighter. It stopped there.
Usually, the normal start up would be green htc logo, and some circles making movement and shapes.
I managed to get into the bootloader screen (volume down, plus power button. And as the logo disappeared, release power button and then press volume up).
Tried to choose reboot, still the same. Tried "reboot to bootloader", it gave the same response as "reboot". Tried "boot to recovery" : nothing significant happened.
Tried "boot to download" : everytime I hit a menu, the screen showed the message that it did the command, but nothing happened after 5 minutes.
Tried to power down, and then charge, the battery percentage didn't show any increase. but it actually charged, because after I entered bootloader and powered off again, charged and then it showed the percentage change. But still not increasing from that later level. And I also couldn't powered on after charge. I had to press volume down and power, to get any response.
What should I do? I suspect major software breakdown even impacted the bootloader? What files can I download (I still confused between RUU, ROM, firmware) to restore my phone. Hopefully it can be done without having to unlock bootloader etc.
Right now it's still "LOCKED", "S-ON", "Software status : Official"..
I just want to restore.. Older firmware will be no problem, as long as it can function normally again and I can update OTA from thereon.
Thank you
Check out this thread: http://forum.xda-developers.com/htc-10/help/brick-stuck-boot-t3372373
MNoisy said:
Check out this thread: http://forum.xda-developers.com/htc-10/help/brick-stuck-boot-t3372373
Click to expand...
Click to collapse
I haven't had the experience to do all that.
The best clue right now is that in download mode, with SD card installed, the system was looking for a 2PS6IMG.zip file. I found one that I think from a trusted source. Can I just use it, or it will be a problem if the model don't match?
rafiqsulistyo said:
I haven't had the experience to do all that.
The best clue right now is that in download mode, with SD card installed, the system was looking for a 2PS6IMG.zip file. I found one that I think from a trusted source. Can I just use it, or it will be a problem if the model don't match?
Click to expand...
Click to collapse
You will need your CID and MID to match. They're both listed in download mode. Also check your OS version on same screen. Paste them here and I can probably help.
purple patch said:
You will need your CID and MID to match. They're both listed in download mode. Also check your OS version on same screen. Paste them here and I can probably help.
Click to expand...
Click to collapse
OS version is 1.80.709.1
htc_pmeuhl PVT S-ON
Radio info...
OpenDSP...
I can't get more data, because even in download mode, after for example choosing one of the option, the screen just stay the same and do nothing.. And I have to press volume down + power again to get into the fastboot screen
But as I had the 1.80.709.1 I can assume that mine would be CID: HTC__621 | MID: 2PS620000
Because all ages still original, updated via OTA, never been unlocked & so on..
The 2ps6img file I got is for the global variant (1.30.401.1)
rafiqsulistyo said:
OS version is 1.80.709.1
htc_pmeuhl PVT S-ON
Radio info...
OpenDSP...
I can't get more data, because even in download mode, after for example choosing one of the option, the screen just stay the same and do nothing.. And I have to press volume down + power again to get into the fastboot screen
But as I had the 1.80.709.1 I can assume that mine would be CID: HTC__621 | MID: 2PS620000
Because all ages still original, updated via OTA, never been unlocked & so on..
The 2ps6img file I got is for the global variant (1.30.401.1)
Click to expand...
Click to collapse
You will need the 1.30.709.1 zip from here https://www.androidfilehost.com/?w=files&flid=74636. Rename it to 2ps6img.zip.
purple patch said:
You will need the 1.30.709.1 zip from here https://www.androidfilehost.com/?w=files&flid=74636. Rename it to 2ps6img.zip.
Click to expand...
Click to collapse
Ok, copied and tried.. After went into the download mode, message in attachment popped up. I hit volume Up button, but nothing happened. I've waited for 10 minutes it didn't indicate any progress whatsoever.
I don't know, may be because I came to this condition, unintentionally (it just went error during startup), maybe some settings aren't correct so the instructions can't be processed? Or it's just my badluck, that even the download mode got corrupted too?
Is there still any hope?
rafiqsulistyo said:
Ok, copied and tried.. After went into the download mode, message in attachment popped up. I hit volume Up button, but nothing happened. I've waited for 10 minutes it didn't indicate any progress whatsoever.
I don't know, may be because I came to this condition, unintentionally (it just went error during startup), maybe some settings aren't correct so the instructions can't be processed? Or it's just my badluck, that even the download mode got corrupted too?
Is there still any hope?
Click to expand...
Click to collapse
Are you sure you have the correct firmware zip? Can you post a picture of the red writing in download mode. It will show CID, MID and OS version.
purple patch said:
Are you sure you have the correct firmware zip? Can you post a picture of the red writing in download mode. It will show CID, MID and OS version.
Click to expand...
Click to collapse
Ok.. Please see attachment..
As additional information, when I went into recovery mode, I never had the phone image with triangle and exclamation sign. What I had was phone with red QUESTION mark. Then, when I press power + volume Up, the message appeared (see attachment also)
purple patch said:
Are you sure you have the correct firmware zip? Can you post a picture of the red writing in download mode. It will show CID, MID and OS version.
Click to expand...
Click to collapse
Ok.. Please see attachment..
As additional information, when I went into recovery mode, I never had the phone image with triangle and exclamation sign. What I had was phone with red QUESTION mark. Then, when I press power + volume Up, the message appeared (see attachment also)
rafiqsulistyo said:
Ok.. Please see attachment..
As additional information, when I went into recovery mode, I never had the phone image with triangle and exclamation sign. What I had was phone with red QUESTION mark. Then, when I press power + volume Up, the message appeared (see attachment also)
Click to expand...
Click to collapse
You will be able to flash firmware using fastboot. Strange you have no factory reset option. Can you post your question in here http://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297. And link to our conversation. I think something else is going on with your phone. The experts in there will be able to help you better.