Hi need some expert help please.
Trying to update my Diamond and first i updated Hard-SPL-Diamond-OliNex 1.40 i think it says.
Then i updated with: RUU_Diamond_HTC_WWE_1.37.871.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship.exe
So everythings seems fine and its installing all the programs and so...
BUT the touch screen is not working very good, its like freezing up all the time and some time is just hanging so i haft to boot the device. But when its not possible to use the touch function the "button" is working. Hope u understand what i mean? Somebody know what to do?
Im all new with this kind of stuff pleae help me!
Best regards Micke
y dont u d/l e 1.93 cook rom it more faster... but need to use unsigned SPL
The Signed HardSPL only allowed you to flash ROMs that have been signed by Olipro and listed in his thread in the sticky
OK.. like i sayed im new. So where do i get a cooked ROM and where a Unsign SPL ?
And does anybody know if there is a Swedish ROM out?
Thanks alot!
This one is unsigned SPL (Hard-SPL - Developer Edition)
http://forum.xda-developers.com/showthread.php?t=400950
harky please read before you post... 1.40 is unsigned hard-SPL..
if you're having trouble with device after flashing, try a couple things:
1) hard reset
2) if it still doesn't work, reflash that ROM or another
3) still giving you problems, then i think you should try one of the other Hard-SPLs (look for the one that is from your original SPL version)
he is asking for unsigned one also (i nv see wrong @ his post)
read again.. he already has 1.40 olinex (which is unsigned)
Related
Developers in this forum
Could someone sign the new Diamond rom 1.37.405.1. I dont want to harm my device and install Dev.edi.of Hard SPL.
I have Signed Hard SPL to be sure Im installing somethink ok form developers or HTC.
bagamyanaleks said:
Developers in this forum
Could someone sign the new Diamond rom 1.37.405.1. I dont want to harm my device and install Dev.edi.of Hard SPL.
I have Signed Hard SPL to be sure Im installing somethink ok form developers or HTC.
Click to expand...
Click to collapse
I have installed dev Hard SPL and 1.37.405.1 and it seems ok. But i understand your concerns.
And I have a question when I install dev.ed.hard spl is it possible to turn Signed Hard SPl again ? or not possible at all.
I have the same request and the same question (posted also into Unsigned HardSPL thread: sorry-> time shift...).
Best. And thank for all tools.
Do not worry, the ROM is factorial and without problems for your devices.
Ok I couldnt stop myself to update and I have install developer ed. and start to update my touch but I just want to know is it possible to downgrade HardSPL 1.4 (dev.ed.) to 1.35 ( Signed ) .
Those who have troubles with other HardSPL versions can give the attached 1.23 (shipped), 1.24 (mfg), 1.34 (shipped) HardSPLs a try.
To flash any of these, first establish an activesync connection via usb. Then run diamond-sspl.bat and confirm execution on touchscreen. The screen will turn black. Now run DiamondCustomRUU from either the HardSPL-1.23, HardSPL-1.24 or HardSPL-1.34 folder.
I have tested these versions on my diamond and did not have any issues with them. I prefer 1.24 because it is a mfg spl. A mfg spl includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
Credits:
1. cmonex for the wonderful relocation hack in sspl
2. pof for JumpSPL
perhaps my memory is bad, but the MFG we based Hard-SPL on is the same version as this or newer possibly, I'll find out later.
closing the stable door after the horse already bolted?
Thanks.
Good to see you here on the diamond forum, jockyw2001
After the great work you did for the kaisers hope it will be the same for the diamond.
Great works again Jocky..
Thanks u so much..
Installed 1.24.Hard version.Working fine in my device
Olipro said:
perhaps my memory is bad, but the MFG we based Hard-SPL on is the same version as this or newer possibly, I'll find out later.
Click to expand...
Click to collapse
no they're different, and possibly 1.24 is older if u left the version# untouched
closing the stable door after the horse already bolted?
Click to expand...
Click to collapse
no, for sure not
will try later
i have tryed others...and they just sit at 0%
im no n00b.....i do know what i am doing
Hey! JockyW is here!
Yey, JockW is here. I love your works in Kaiser sections. Welcome, friend.
jockyw2001 said:
Those who have troubles with other HardSPL versions can give the attached 1.23 (shipped) and 1.24 (mfg) HardSPLs a try.
To flash any of these, first establish an activesync connection via usb. Then run diamond-sspl.bat and confirm execution on touchscreen. The screen will turn black. Now run DiamondCustomRUU from either the HardSPL-1.23 or HardSPL-1.24 folder.
I have tested both versions on my diamond and did not have any issues with them. I prefer 1.24 because it is a mfg spl.
Credits:
1. cmonex for the wonderful relocation hack in sspl
2. pof for JumpSPL
Click to expand...
Click to collapse
Hi man, happy to see you here ( i still owe you from radio from hell!!!)
i have a noob question: whats the difference between this hardspl and Olinex version? and do i hjave to change it?( i already have olinex developers edition)
Thanks jocky bro..!
It works just fine
i installed 1.24... it works although i can't see anything special.
@JockyW2001
Can this HSPL be overwritten for warranty returns with original SPL or it also must be signed by your special certificate first? I am referring to OliNex-unsigned "back-to-original-SPL" method.
SecureGSM said:
@JockyW2001
Can this HSPL be overwritten for warranty returns with original SPL or it also must be signed by your special certificate first? I am referring to OliNex-unsigned "back-to-original-SPL" method.
Click to expand...
Click to collapse
You can flash any signed spl with this sspl. Which signature is used doesn't matter: self-signed, olinex, or htc it doesn't make a difference.
works thank you
this now lets me flash what ever i want
before i was getting stuck at 0%...grrrrrr
thank you for this...you are a star!
Great release Buddy still using your first beta
HardSPL v1.34 added to first post.
jockyw2001 said:
HardSPL v1.34 added to first post.
Click to expand...
Click to collapse
thanks for update.I looking for 1.37 and 1.93 SPL in next times
I am confused which one to install?
What is mfg?
Which is better?
Sorry for all questions at once but i am really confused.
BTW i have olinex 1.40 dev edition.
Mfg spl version includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
jockyw2001 said:
Mfg spl version includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
Click to expand...
Click to collapse
Thanks for the quick answer. It explained everything that i needed to know.
so many hard-spls, so little time
k sorry this sounds so noobish but i've never seen so many hard-spl's in one forum before ha..
so you're basically saying if people are having trouble flashing with the other hard-spl (do you have any explanation as to why this is?) they should just try each of these and see which one works?
i guess what i'm wondering is why would 1.23hard-spl work better for someone than 1.34? what i'm guessing right now is, 1.24 is MFG so should work better in most instances, but technically the best 'fit' would be a hard-spl based on your shipped spl?
Hey guys.
Second time I have went with a cooked/modded ROM on a TouchDiamond.
The update process has been 100% sucessful each time.
But now I am trying to get back to the original Telstra ROM - Telstra_WWE_1.38.841.5 on the Asia HTC eClub website. This is also the original ROM on the unit when it shipped.
Using the guide located at:
http://modmydiamond.info/index.php?option=com_content&task=view&id=22&Itemid=26
I installed Hard-SPL 1.40 Olinex SIGNED – Once this was installed I was under the impression somehow it would allow me to go back to Original ROM if needed. As I though the Hard-SPL was a backup before messing with ROM.
I was then using Elite 3.0 – But need to get the unit back to the Original ROM before it is sent away for work use.
I am trying to run the Telstra ROM RUU Installer but receive an ERROR 262 - This occurs when the unit still show 0%.
Any ideas on what I can do.
Also – thank you, as your help and time is much appreciated
Brett
Hi, install the unsigned hard spl developer edition then install that stock rom.
hi sumitescp,
is the SPL 1.93 unsigned referred to as unsigned hardspl developer edition?
You'll either need to get the ROM signed for HardSPL, or use the unsigned HardSPL.
jakontil said:
hi sumitescp,
is the SPL 1.93 unsigned referred to as unsigned hardspl developer edition?
Click to expand...
Click to collapse
I believe that with the term "unsigned hardspl developer edition" we reffer to the unsigned olinex 1.40 hardspl.
It is the first attachment in this thread http://forum.xda-developers.com/showthread.php?t=400950
That is the recommended one.
But I think 1.93 unsigned SPL would work too, but first try the recommended one.
First Install the ROM, and then downgrade the SPL. (Is this for warranty return?)
Laubscherc said:
First Install the ROM, and then downgrade the SPL. (Is this for warranty return?)
Click to expand...
Click to collapse
Use Unsigned SPL ., Flash the ROM
Yes for warranty return
Do you have a copy of the Telstra 1.38 SPL? I didnt think the Original reloads back the SPL?
This isn't actually for a warrenty return. I have had the phone for 2 weeks and been reading quite a bit about it on here - and thought i'd give the Elite v3.0 a go -
Love the speed imporvement of it - The unit just responds so much quicker. But i have then realisied i need the telstra MyPlace apps - My Account, Sensis, Foxtel etc..
So am deciding to go back to the original ROM.
Anyways - So i can re run the Hard SPL installer with an unsigned HardSPL installer and it will over right the exisiting one?
Then this will allow me to install the original ROM from the HTC Site? Is this correct.
In the above guide (as i mentioned the the first post) they reccomend:
"Hard-SPL 1.40 Olinex Developer Edition-unsigned" as the HardSPL Unsigned tool to use.
From there i have the choice of 3 HardSPL installers:
http://forum.xda-developers.com/showthread.php?t=400950
Unsigned-Hard-SPL-Diamond-OliNex.zip (1.92 MB)
HardSPL_Olinex137_Unsigned.zip (137.4 KB)
RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip (136.6 KB)
Which one do you reccomend?
Once again - thanks for all your support on this issue. I very much appriciate it and your time.
Brett
RUU_Signed_1_93OliNex_HSPL_UnsignedEdition
is what I am using on the telstra diamond.
The others left me with some flickering in TF3D
I installed this one over the Signed Hard SPL without any issues.
Hey guys.
Installed the Unsigned HardSPL and then was aloud to install the Original Telstra Rom v1.38...... hate it - but o well. I'll live.
Thanks once again for your help and time
Brett
Hello All,
I am in a fix right now . I ordered HTC Diamond from Rogers and got a french phone instead. I really cant do anything with that. Now I called rogers and they say they dont have touch english in stock anymore and dont expect it soon too. I have two choices only, flash with WWE ROM or return it back. I really dont wanna return it back but I am kinda new to all SPL thing. I want to flash it. I have experience in flashing my HTC Excalibur 3-4 times.
I just have two questions to ask and if you can answer them I will get to keep the phone or else I would have to send it back.
1. My current SPL version is 1.93 . So before flashing to a new rom which SPL should I flash it to. There are tons floating around. Can u pin point to me please.
2. Will any ROM work with the SPL?
I will really appreciate your help .
Thank you
UPDATE: I just found out there is a ROGERS WWE ROM on xda. Do I need to HARD SPL it or I can just change the ROM?
Yup, you'll still need to put the HardSPL on to allow you to change the device, as your changing it's region as far as the device knows.
Use this one:
http://forum.xda-developers.com/attachment.php?attachmentid=101134&d=1216793074
It's Olinex's HardSPL for 1.93 (same one I used), works perfect.
Just make sure you follow the instructions on the flasher.
Thanks for your quick reply Phoenix..
I appreciate this...
Once SPL is done I can flash with any ROM right?
Thanks again...
Yup, no problem and lots of choice lol
Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^
i try this rom and its running with no probleme
Inv1ctus said:
Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^
Click to expand...
Click to collapse
Choose a different HSPL, go for 1.40 or 1.93. I had the same problem.
Could you please tell me exactly what you have done?
Every step and which SPLs you used?
Did you only use the CustomRUU from the download file?
That would be very nice
Otherwise i am about to desperate
sraaj: okay, i am going to try it right now^^
I could write my version, but if you look at sticky number 3, that has everything. I followed it and it worked just fine....
http://forum.xda-developers.com/showthread.php?t=416211
just that 1.30 did not work, so I used 1.40 which is in the post above... also i hope its not CDMA, since the above is for GSM models..
Could anyone give me a link to download HSPl 1.40 or 1.93 please?
I seem to be too stupid to find another one than 1.3
Edit:
Well, i now found a 1.93 and a 1.40 but they seem to be the same as my 1.3
Does anyone have a link with the version i need?
2. Edit:
I found an 1.40 .... finally
so now i try it again
It is updating right now, with HSPL 1.40..oh guys i hope so much that it works in the end
.....And did it work?
So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys
Inv1ctus said:
So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys
Click to expand...
Click to collapse
Congratulations
Yes, that was precisely my problem. with 1.40 everything works.
I upgraded to 1.93 but dont know why, just cuz it looks to be a higher version...
So now you can spread the knowledge, and keep helping our junior members...