Hello all. I have a G7 thinq, the power button of my phone is not working, so I cannot boot into EDL mode. I saw commands to enter into EDL mode but nothing regarding exiting from it and rebooting back to home. Could anyone help?
Not sure if there is any other way. I've tried once to try booting to EDL using commands which did not work. And also the only method I know of to exit EDL is to hold the power + volume - button.
Both the Python EDL client (edl.py reset) and my own Windows EDL client (edl.exe /z) have operations to reboot from EDL mode.
Related
Hi,
I'm pretty sure my Mi 5s doesn't support EDL mode. I tried to get into EDL mode in every way I found online.
When I try to enter EDL mode, my phone simply restarts back to the OS.
My bootloader is unlocked, this is what I've already tried:
Enabling developer mode + usb debugging, and use command "adb reboot edl"
Using this special script in fastboot mode: https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Combo buttons while phone is turned on: Volume up + Volume down + Power button, and leave power button after few seconds
Combo buttons while phone is turned off: Volume up + Volume down + Power button, and leave power button after few seconds
Reboot windows with "disabled driver signature enforcement" feature
Re-installing the drivers in MiFlash, including the qualcomm driver
In my understanding I am supposed to see a black screen, or a flashing red led, but non of these happen for me, simply restart back to the OS.
The reason I need to enter EDL is because I must flash persist partition again. When I tried to fix my fingerprint sensor I tried multiple things in order to flash the persist partition, but without success. Eventually I accidentally deleted all the persist partition content. So then I re-installed the latest MIUI china dev and hoped the persist will be fine, but now my fingerprint sensor, proximity sensor, and adaptive brightness doesn't work, perhaps other things that I didn't find out yet.
I tried following this thread: http://en.miui.com/thread-478922-1-1.html , thanks to david_korku help.
When I try Part I, and use "fastboot erase persist", I get "FAILED (remote: partition write protected)" error.
When I try Part II, I can't finish it because I can't enter EDL mode (because of the reasons I wrote above).
Please help, can someone help me figure out how to flash the presist image? and maybe even enter EDL mode? (if it exist on my phone)
#################################
UPDATE:
I finally managed to get into EDL mode and got everything fixed!!
This thread can be deleted.
I updated the rest in my other thread: https://forum.xda-developers.com/mi-5s/help/firmware-to-fix-fingerprint-sensor-t3653847
quarvin said:
Hi,
I'm pretty sure my Mi 5s doesn't support EDL mode. I tried to get into EDL mode in every way I found online.
When I try to enter EDL mode, my phone simply restarts back to the OS.
My bootloader is unlocked, this is what I've already tried:
Enabling developer mode + usb debugging, and use command "adb reboot edl"
Using this special script in fastboot mode: https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Combo buttons while phone is turned on: Volume up + Volume down + Power button, and leave power button after few seconds
Combo buttons while phone is turned off: Volume up + Volume down + Power button, and leave power button after few seconds
Reboot windows with "disabled driver signature enforcement" feature
Re-installing the drivers in MiFlash, including the qualcomm driver
In my understanding I am supposed to see a black screen, or a flashing red led, but non of these happen for me, simply restart back to the OS.
The reason I need to enter EDL is because I must flash persist partition again. When I tried to fix my fingerprint sensor I tried multiple things in order to flash the persist partition, but without success. Eventually I accidentally deleted all the persist partition content. So then I re-installed the latest MIUI china dev and hoped the persist will be fine, but now my fingerprint sensor, proximity sensor, and adaptive brightness doesn't work, perhaps other things that I didn't find out yet.
I tried following this thread: http://en.miui.com/thread-478922-1-1.html , thanks to david_korku help.
When I try Part I, and use "fastboot erase persist", I get "FAILED (remote: partition write protected)" error.
When I try Part II, I can't finish it because I can't enter EDL mode (because of the reasons I wrote above).
Please help, can someone help me figure out how to flash the presist image? and maybe even enter EDL mode? (if it exist on my phone)
#################################
UPDATE:
I finally managed to get into EDL mode and got everything fixed!!
This thread can be deleted.
I updated the rest in my other thread: https://forum.xda-developers.com/mi-5s/help/firmware-to-fix-fingerprint-sensor-t3653847
Click to expand...
Click to collapse
Link is not workint, can you explain please!
If anyone got success in recovering their z2 plus from 900e mode or unable to boot please tell us here how to do so. Thanks.
It happened to me . I cut down my z2plus plus cable to make deep flash cable and https://youtu.be/A9D-kqIziaA
Yes I got success
To enter in the edl mode or get 9008
Just follow the step
Completely switch off your phone
Now hold volume up button for 15 sec
After 15 sec press the power button for .5sec
Now again press and hold the power button insert the cable after you enter to edl mod realese both power and volume button
If any problem occur try it again and again
Done...
Okay so this helped me in booting to EDL mode, but still i'm unable to flash using QFIL or MiFlash. What should I do now?
Ensure the following steps
1 You have a valid qpst flashable file.
2. The file was extracted in c drive within a folder having simple name.
3. Start qfil app after going to the EDL mode perform the operation as fast as you can.
if problem persists .
TRY AGAIN AND AGAIN FROM THE VERY BEGINNING
okay Will try.
Update:
Workedd....!!! Thanks a Tonn......
hi
My phone does not enter EDL mode. When I press and release the volume keys, when I plug in the cable, the mobile charging screen appears and the earphone and Qualcomm are not detected by Windows.
ahmadjuybar said:
hi
My phone does not enter EDL mode. When I press and release the volume keys, when I plug in the cable, the mobile charging screen appears and the earphone and Qualcomm are not detected by Windows.
Click to expand...
Click to collapse
You should not release the key before you plugged into your PC.
Why don't you - adb reboot edl ?
ahmadjuybar said:
hi
My phone does not enter EDL mode. When I press and release the volume keys, when I plug in the cable, the mobile charging screen appears and the earphone and Qualcomm are not detected by Windows.
Click to expand...
Click to collapse
My OP7T HD1900 does not go to EDL mode as well. I've tried every possible way of holding the volume =/- then plugging the phone to the PC. It just jumps on to Fastboot mode everytime. Dev tools have been enabled and I've also tried long holding the buttons, not letting go long after I've plugged the phone -- no dice. Also tried the "adb reboot edl" command -- still no go. Hoping somebody's expert advise.
Skarrab22 said:
My OP7T HD1900 does not go to EDL mode as well. I've tried every possible way of holding the volume =/- then plugging the phone to the PC. It just jumps on to Fastboot mode everytime. Dev tools have been enabled and I've also tried long holding the buttons, not letting go long after I've plugged the phone -- no dice. Also tried the "adb reboot edl" command -- still no go. Hoping somebody's expert advise.
Click to expand...
Click to collapse
EDL mode doesn't show anything on the screen. You have to detect it with an app on the PC. Just throwing that out there in the event you're expecting to see a screen that says EDL or something.
xocomaox said:
EDL mode doesn't show anything on the screen. You have to detect it with an app on the PC. Just throwing that out there in the event you're expecting to see a screen that says EDL or something.
Click to expand...
Click to collapse
You're right. Screen's just supposed to remain black/blank (like it's turned off). But definitely it is not supposed to go on Fastboot display, right?
You can use Magisk to reboot into EDL mode.
Magisk->modules->3 vertical dots->reboot to EDL
Skarrab22 said:
You're right. Screen's just supposed to remain black/blank (like it's turned off). But definitely it is not supposed to go on Fastboot display, right?
Click to expand...
Click to collapse
It shouldn't go to Fastboot. That means it's not working right.
Do you need an unlocked bootloader to enter EDL mode?
speedyjay said:
Do you need an unlocked bootloader to enter EDL mode?
Click to expand...
Click to collapse
Nop
For edl mode shutdown the oneplus 7t
After this press and hold the voll + and voll - and putt in the usb cable but keep pressing the two buttons
And start the msm tool.
the op7t should be found by the edl tool, if not click on ensure.
and don't release the two buttons until you press the start button in the edl tool, otherwise the op7t will automatically exit the edl mode after a while (approx. 10 seconds)
Is Windows Device Manager supposed to show a yellow triangle on a "Qualcomm HS-USB QDLoader 9008" when in EDL mode? Event Manager shows the following error:
Code:
Device USB\VID_05C6&PID_9008\7&24d98034&0&4 was not migrated due to partial or ambiguous match.
Last Device Instance Id: USB\Vid_0E0F&Pid_0001\2370402450030061
Class Guid: {36fc9e60-c465-11cf-8056-444553540000}
Location Path: PCIROOT(0)#PCI(0701)#PCI(0003)#USBROOT(0)#USB(6)#USB(4)
Migration Rank: 0xF000FFFFFFFF0033
Present: false
Status: 0xC0000719
Source: Kernel-PnP, Event ID: 442
i think with this tool from this link http://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711 is the easiest way to put your 7T on EDL mode
Nevermind, I finally found the driver. It was in Windows Update, but Windows wouldn't install it automatically. I had to click on "View optional updates" and check the box for the Qualcomm driver.
ChrisFeiveel84 said:
For edl mode shutdown the oneplus 7t
After this press and hold the voll + and voll - and putt in the usb cable but keep pressing the two buttons
And start the msm tool.
the op7t should be found by the edl tool, if not click on ensure.
and don't release the two buttons until you press the start button in the edl tool, otherwise the op7t will automatically exit the edl mode after a while (approx. 10 seconds)
Click to expand...
Click to collapse
Thank you for this. My phone kept going out of EDL after a few seconds and I was afraid to start the msm tool thinking it would fail. Worked perfectly.
ChrisFeiveel84 said:
For edl mode shutdown the oneplus 7t
After this press and hold the voll + and voll - and putt in the usb cable but keep pressing the two buttons
And start the msm tool.
the op7t should be found by the edl tool, if not click on ensure.
and don't release the two buttons until you press the start button in the edl tool, otherwise the op7t will automatically exit the edl mode after a while (approx. 10 seconds)
Click to expand...
Click to collapse
THANK YOU FOR THIS!!!!
I was struggling to get it to work. One port on my laptop just kept launching Fastboot, I thought the other wasn't doing anything until I looked in control panel and saw it connected and disconnecting every 10 seconds!
ChrisFeiveel84 said:
For edl mode shutdown the oneplus 7t
After this press and hold the voll + and voll - and putt in the usb cable but keep pressing the two buttons
And start the msm tool.
the op7t should be found by the edl tool, if not click on ensure.
and don't release the two buttons until you press the start button in the edl tool, otherwise the op7t will automatically exit the edl mode after a while (approx. 10 seconds)
Click to expand...
Click to collapse
EVERYBODY WHO HAS BRICKED THEIR OP7TPRO READ THIS POST CAREFULLY. I THOUGHT MINE WAS TOAST BUT THE BUTTONS AND PLUGGING IN IS CRUCIAL FOR YOUR PC TO RECOGNIZE YOUR PHONE IN MSM.........IT WORKS...........THANK YOU CHRIS
Skarrab22 said:
My OP7T HD1900 does not go to EDL mode as well. I've tried every possible way of holding the volume =/- then plugging the phone to the PC. It just jumps on to Fastboot mode everytime. Dev tools have been enabled and I've also tried long holding the buttons, not letting go long after I've plugged the phone -- no dice. Also tried the "adb reboot edl" command -- still no go. Hoping somebody's expert advise.
Click to expand...
Click to collapse
Hi, I have the same issue. Have you found a solution?
XD-MOD2-9MM said:
Why don't you - adb reboot edl ?
Click to expand...
Click to collapse
sedated8 said:
Hi, I have the same issue. Have you found a solution?
Click to expand...
Click to collapse
`adb reboot edl` was the simplest approach for me.. and the 7t does reboot if it doesn't get connection request from MSMtool. so keep the msmtool open, and issue the reboot, MSM will automatically connect once it sees the phone.
I tried ton of time while pressing Vol Up+Down Always T-Mobile 7T entering to Fastboot Menu.
Please someone help me.
Sorry for my English
Thank you
Your phone has to be off for it to go into EDL Mode. turn phone off then try again.
The commands ur using is for fastboot it sounds like.
Follow these steps:
Hold down Volume Up + Volume Down buttons for few seconds and plug in the USB cable, which is already attached to the computer from another side. Keep pressing until you see EDL mode. (Note: Make sure you have USB connected in PC before connecting it to the smartphone while pressing both the buttons.)
xHvlios said:
Your phone has to be off for it to go into EDL Mode. turn phone off then try again.
The commands ur using is for fastboot it sounds like.
Follow these steps:
Hold down Volume Up + Volume Down buttons for few seconds and plug in the USB cable, which is already attached to the computer from another side. Keep pressing until you see EDL mode. (Note: Make sure you have USB connected in PC before connecting it to the smartphone while pressing both the buttons.)
Click to expand...
Click to collapse
Note in EDL Mode your screen should be completely black and on device manager it should say like qsbulk or qualcomm something
I brick my phone and it bootloops... So i can't enter into the firmware...
I can't enter into any recovery so I can't sideload...
My only way is using EDL.. but I'm unable to enter... I completely turn it off, pressed both vol buttons and plug the cable
If I keep the buttons, it enters always en fastboot mode; if I not hold the buttons it tries to load the normal firmware and bootloads
How can I enter? Why I am unable to sideload?
Please help
Astur_Torque said:
I brick my phone and it bootloops... So i can't enter into the firmware...
I can't enter into any recovery so I can't sideload...
My only way is using EDL.. but I'm unable to enter... I completely turn it off, pressed both vol buttons and plug the cable
If I keep the buttons, it enters always en fastboot mode; if I not hold the buttons it tries to load the normal firmware and bootloads
How can I enter? Why I am unable to sideload?
Please help
Click to expand...
Click to collapse
Hold both volume buttons and power bottom to enter fastboot mode, in fast boot mode type fastboot boot twrp.img or what ever the twrp image name is and in twrp boot to EDL. Make sure MSM Download Tool to is up and running and you clicked the start button first. It will flash the firmware to the phone....
TheGhost1951 said:
Hold both volume buttons and power bottom to enter fastboot mode, in fast boot mode type fastboot boot twrp.img or what ever the twrp image name is and in twrp boot to EDL. Make sure MSM Download Tool to is up and running and you clicked the start button first. It will flash the firmware to the phone....
Click to expand...
Click to collapse
thanks, but I was completely unable to enter into twrp... when I put fastboot boot twrp.img or similar filename It always restarts and bootloops
Any idea what twrp version works?
Astur_Torque said:
thanks, but I was completely unable to enter into twrp... when I put fastboot boot twrp.img or similar filename It always restarts and bootloops
Any idea what twrp version works?
Click to expand...
Click to collapse
OnePlus 9 pro
Download twrp-3.7.0_11-0-lemonadep.img
Download page for twrp-3.7.0_11-0-lemonadep.img
dl.twrp.me
TheGhost1951 said:
OnePlus 9 pro
Download twrp-3.7.0_11-0-lemonadep.img
Download page for twrp-3.7.0_11-0-lemonadep.img
dl.twrp.me
Click to expand...
Click to collapse
With that it restarts but not load TWRP
I've been through some woes this week with MSM Tool and my advice for anyone that gets to that point this week when trying to get to Android 13 with root:
If you open MSM Tool and you don't see any ports or devices listed (ever), then you have a driver problem. If you get the Sahara error you have the wrong MSM Tool or more-likely, you didn't play Simon Says correctly with your buttons.
If you get the sahara error or you cannot ever get your phone into EDL mode, then do the following:
Take a deep breath
Unplug your phone
Grab your phone like a crab claw and mash both volume buttons and the power button so you can easily hold all 3 at the same time
Hold all 3 down for 30 seconds then let go
Wait a few seconds
Hold ONLY the volume buttons down for a few seconds
Did the phone turn on? If not then sweet the phone is off off
Now hold both volume buttons down for 10 seconds and then plug in your usb cable with MSM Tool already open
You should now be in EDL mode and if not you're bad at Simon Says so try again
If your screen is black and you get nothing back from MSM Tool then it's your drivers.
I focused so so much on changing PCs and cables and MSM Tools and fastboot commands when in reality drivers were my issue from the beginning and MSM Tool and EDL mode are both flakey. The above steps worked for me 100% of the time. You just have to actually wait a long time between your steps.
Astur_Torque said:
With that it restarts but not load TWRP
Click to expand...
Click to collapse
Time to MSM, there has to be a way to EDL!