Related
Hi..
Im running on latest miui 10.0.2.0 global stable.
Magisk 17.1 stable.
Magiskhide only work for a while.. I check root on aida64.... It says rooted:no for a while and then say rooted:yes including rootbeer app. I have to turn on and off Magiskhide with magisk manager to get hiding again.. Here is my magisk error..
Code:
11-16 01:24:24.341 9906 9906 E Magisk : read failed with 0: Success
11-16 01:24:24.343 9744 9744 E Magisk : read failed with 25: Not a typewriter
Guys... I think i found a solution.... Don't add lot of apps to magiskhide.... And also dont install busybox from playstore app.... Just install in magisk manager downloads section.... If you did installed just flash magisk uninstaller zip via twrp and do as i said... Worked for mee.... Hit thanks
Nethunter Kernel for Samsung Galaxy S7 (SM-G930F/FD) Stock Oreo
Code:
I am not responsible for bricked devices.
If you going to flash it, you accepted it.
Of course your warranty is void.
This thread is only for herolte . If you have Edge go here
FEATURES:
BadUSB
HID gadget keyboard/mouse (with possibility to temporarily disable)
DriveDroid
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection) [Compatibility List]
Ethernet
F2FS
Bluetooth HCI USB support
RTL-SDR DVB support
Boeffla wakelock blocker v1.10
Wireguard
Enable Netfilter Target TTL
rtl88xxau driver
rtl8188eus driver
Download:
Latest version G930F here.
Installation:
1. Flash latest TWRP twrp-3.3.0-1+ ( to see data partition with enabled disk quota)
1. TWRP Backup your ROM
2. Flash G930F_Nethunter_StockOreo_v*.img
3. Flash Universal DM-Verity, ForceEncrypt (You don't need to disable disk quota)
3. Flash latest Magisk 19.1+
4. Extract libs WiFi_fix_Libsecure_storage.so.zip to folders: /system/lib & /system/lib64 with rw-r--r-- permissions to libs.
5. Install busybox
6. Install Magisk Nethunter module from repository
7. Install kalifs-armhf-*.tar.xz by Nethunter manager
8. Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ OR system/bin/ and give permissions to it rwxr-xr-x
9. Reboot
Loadable modules:
G930F_Nethunter_Modules_vX.X.zip extract only modules for your version of kernel.
In every kernel folder are modules and firmware. You need only modules which you want to use.
For example if you don't want use tuners and dvb-frontends. Don't load modules from /modules/drivers/media tuners and dvb-frontends
In firmware are compiled firmwares for some of modules to use they you need to copy they to system/etc/firmware.
basic commands:
insmod 88XXau.ko - load module
rmmod 88XXau.ko - unload module
lsmod - list loaded modules
Some modules depend on another modules. If you want load rt2800usb.ko, you need first load rt2800lib.ko.
Another way to load modules is Module Loader
Copy modules to storage and choose modules which you want to load (load they more than 1 times, this apk load modules from up to down it don't look at dependence from modules)
EXTRA:
1.In Utilities.7z are wifi testing tools binaries like aircrack-ng compiled from source of nexmon (Not needed for Nethunter only for test tools direct from android without Nethunter)
2. DriveDroid without bugs made by disabling HID Patch:
To disable HID Patch: use this command in terminal: "echo Y > /sys/module/g_android/parameters/hid_disable"
Changing mode isn't instant after changing module status. Use DriveDroid (mount iso -> dismount) to active hid_disable.
To enable HID Patch: "echo N > /sys/module/g_android/parameters/hid_disable" and use DriveDroid like with disabling HID Patch.
HIDPatchSwitch this is simple script which can switch between HID enabled and disabled and show changed status.
Old Installation steps:
1. TWRP Backup your ROM
2. Flash G930F_Nethunter_StockOreo_v*.img
2.1.Look at EXTRA.
3. Flash latest Magisk (Recommend 18.1+ version, 18.0 could make frezzes)
4. Extract libs WiFi_fix_Libsecure_storage.so.zip to folders: /system/lib & /system/lib64 with rw-r--r-- permissions to libs.
5. Install busybox can be one from Magisk repository
6. Install Magisk Nethunter module from repository
7. Install kalifs-armhf-*.tar.xz by Nethunter manager
8. Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ OR system/bin/ and give permissions to it rwxr-xr-x
9. Reboot
Now you have Nethunter on your Stock Oreo ROM.
EXTRA:
1.If you want to have unencrypted data partition:
1.1. Format data partition(you lose your data).
1.2. After flashing kernel flash "remove encryption.zip".
1.3. Reboot to system (First start configuration wizard).
1.4. Reboot to twrp and flash Magisk.
Screens:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[KERNEL] [G930F] Nethunter for Stock Oreo ROM, Kernel for the Samsung Galaxy S7
Contributors
Wirusx
Source Code: https://github.com/Svirusx/NetHunter-s7-kernel-StockOreo
Kernel Special Features:
Version Information
Status: Testing
Created 2019-02-05
Last Updated 2019-05-16
CHANGELOG
2020-12-06 - v1.5.1
Added loadable modules support
Update to Samsung source G930FXXS6ESI4
Enable Netfilter Target TTL
Added rtl88xxau driver
Added rtl8188eus driver
2019-05-16 - v1.4
Nethunter defconfig fixes
2019-04-20 - v1.3
Added monitor mode patches to some wifi usb drivers.
Added possibility to disable HIDPatch (this fixes DriveDroid)
Added HIDPatchSwitch: Simple sh script to switch status of HIDPatch (Info in comments in script)
2019-02-25 - v1.2
Added missing drivers like SUNRPC, NFS v4 etc.
Added Boeffla wakelock blocker
Removed unnecessary drivers.
2019-02-05 - v1.1
Rollback encryption drivers.
2019-02-05 - v1.0
Initial release.
Reserved
A Few Questions:
First of all, sorry if this is a silly question, but how are you supposed to flash the kernel when its in .img format? When i try to flash it with twrp it just asks mart wether i want to flash to the boot or recovery. Which do i choose? Also where do i get the disable encryption.zip that you mention in EXTRAS? Thanks so much for porting this to oreo though!
Jack_Rickwood said:
First of all, sorry if this is a silly question, but how are you supposed to flash the kernel when its in .img format? When i try to flash it with twrp it just asks mart wether i want to flash to the boot or recovery. Which do i choose? Also where do i get the disable encryption.zip that you mention in EXTRAS? Thanks so much for porting this to oreo though!
Click to expand...
Click to collapse
1. Choose boot. If you flash it like recovery than you lose TWRP and you need flash TWRP again by Odin.
2. disable encryption.zip i found sometime ago on this forum but now i can't find it again. I attach it to this post. I don't know why but only this one works for my phone to remove force encryption.
Ok, thx!
Wirusx said:
1. Choose boot. If you flash it like recovery than you lose TWRP and you need flash TWRP again by Odin.
2. disable encryption.zip i found sometime ago on this forum but now i can't find it again. I attach it to this post. I don't know why but only this one works for my phone to remove force encryption.
Click to expand...
Click to collapse
Ok, it seems to work well up to the wifi fix mart, but no matter what i seem to do, it wont let me change the permissions of the wifi fix libs! Do you have any idea why that might be?
Jack_Rickwood said:
Ok, it seems to work well up to the wifi fix mart, but no matter what i seem to do, it wont let me change the permissions of the wifi fix libs! Do you have any idea why that might be?
Click to expand...
Click to collapse
You need to have those files in linux partition like ext4 (system partition is fine for it)
So move files to system/vendor/lib64 and /system/vendor/lib and then change permissions.
you need too remount system partition because default it is read only. Some root explorers do that automatically.
If you have those files in microsd and most time it is exFAT or FAT32 here aren't unix permissions so you can't change permissions here.
Oh, ok, thx so much! Ive got it now
Wirusx said:
You need to have those files in linux partition like ext4 (system partition is fine for it)
So move files to system/vendor/lib64 and /system/vendor/lib and then change permissions.
you need too remount system partition because default it is read only. Some root explorers do that automatically.
If you have those files in microsd and most time it is exFAT or FAT32 here aren't unix permissions so you can't change permissions here.
Click to expand...
Click to collapse
Sorry, last thing. Some wifi hacking apps (like deauthentication) dont seem to be working. Would this be because i have to install the nexmon stuff, or is it just not working yet? If its because i have to install the nexmon stuff, what folder do i put them in and which permissions?
Jack_Rickwood said:
Sorry, last thing. Some wifi hacking apps (like deauthentication) dont seem to be working. Would this be because i have to install the nexmon stuff, or is it just not working yet? If its because i have to install the nexmon stuff, what folder do i put them in and which permissions?
Click to expand...
Click to collapse
For wifi testing you need special usb wifi dongle could be with AR9271 chip. If you want try wifi testing tools without usb wifi dongle you need to switch to Nethunter for LineageOS 14.1 it have monitor mode in interne wifi card.
All needed tools are IN Nethunter chroot soo you don't need binary from nexmon. You need to use Kali terminal or VNC to try wifi testing tools.
If you don't have needed tool in Nethunter chroot you need to update or install it like on normal Linux apt-get ...
Compile for Mi Mix 2 please? Lineage 15.1
Wirusx said:
Nethunter Kernel for Samsung Galaxy S7 (SM-G930F/FD) Stock Oreo
Code:
I am not responsible for bricked devices.
If you going to flash it, you accepted it.
Of course your warranty is void.
This thread is only for herolte . If you have Edge go here
FEATURES:
BadUSB
HID gadget keyboard/mouse
DriveDroid
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection)
Ethernet
F2FS
Bluetooth HCI USB support
RTL-SDR DVB support
Download:
Latest version G930F here.
Installation:
1. TWRP Backup your ROM
2. Flash G930F_Nethunter_StockOreo_v*.img
2.1.Look at EXTRA.
3. Flash latest Magisk (Recommend 18.1+ version, 18.0 could make frezzes)
4. Extract libs WiFi_fix_Libsecure_storage.so.zip to folders: /system/lib & /system/lib64 with rw-r--r-- permissions to libs.
5. Install busybox can be one from Magisk repository
6. Install Magisk Nethunter module from repository
7. Install kalifs-armhf-*.tar.xz by Nethunter manager
8. Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
9. Reboot
Now you have Nethunter on your Stock Oreo ROM.
EXTRA:
1.If you want to have unencrypted data partition:
1.1. Format data partition(you lose your data).
1.2. After flashing kernel flash "remove encryption.zip".
1.3. Reboot to system (First start configuration wizard).
1.4. Reboot to twrp and flash Magisk.
2.In Utilities.7z are wifi testing tools binaries like aircrack-ng compiled from source of nexmon (Not needed for Nethunter only for test tools direct from android without Nethunter)
Screens:
XDA:DevDB Information
[KERNEL] [G930F] Nethunter for Stock Oreo ROM, Kernel for the Samsung Galaxy S7
Contributors
Wirusx
Source Code: https://github.com/Svirusx/NetHunter-s7-kernel-StockOreo
Kernel Special Features:
Version Information
Status: Testing
Created 2019-02-05
Last Updated 2019-02-06
Click to expand...
Click to collapse
Can you please compile this for Mi mix 2 (Chiron) on lineage 15.1 if you have time
Thanks in advance.
@Wirusx do you have telegram support group?
Wow, amazing! Great job! But as I understand it, Monitor mode and packet injection does not work here? Need to connect a usb wifi adapter?
Is it possible that in the future on the stock rom we will get these functions?
Cheers for porting this to Oreo. I may look at including this in my own kernel if you don't mind
Great job for porting this on Oreo, i was still using the one made for note 7 porting on Hydra ROM with Dualboot Patcher. Unfortunately when I flash it it freeze on the first screen of the boot, i'm on the last update of the _alexndr ROM, I tried flashing magisk 18.1 after the kernel or flashing kernel, remove_encryption.zip and magisk 18.1 as you suggested but I got the same result. Could this be becouse I'm on S3ERLF?
ModX81 said:
@Wirusx do you have telegram support group?
Click to expand...
Click to collapse
Sry no telegram support group,
_Danil_ said:
Wow, amazing! Great job! But as I understand it, Monitor mode and packet injection does not work here? Need to connect a usb wifi adapter?
Is it possible that in the future on the stock rom we will get these functions?
Click to expand...
Click to collapse
Monitor mode working when you have special usb wifi adapter like TP-Link TL-WN722N.
All wifi usb adapters with AR9271 chip are fine for kali linux and for this Nethunter port
but you can try my port of LineageOS 14.1 it have support to monitor mode by nexmon ( it's not perfect like usb dongle but works...)
djb77 said:
Cheers for porting this to Oreo. I may look at including this in my own kernel if you don't mind
Click to expand...
Click to collapse
Its open source project made for fun. Do that if you want
SLAYER96 said:
Great job for porting this on Oreo, i was still using the one made for note 7 porting on Hydra ROM with Dualboot Patcher. Unfortunately when I flash it it freeze on the first screen of the boot, i'm on the last update of the _alexndr ROM, I tried flashing magisk 18.1 after the kernel or flashing kernel, remove_encryption.zip and magisk 18.1 as you suggested but I got the same result. Could this be becouse I'm on S3ERLF?
Click to expand...
Click to collapse
Normally i don't use csc mods and this Nethunter is made from Samsung Sources for Stock ROM kernel it may not working with custom ROMs.
When you format data partition and then flash STOCK ROM you can run it for first time it is going to STOCK recovery and install csc than is reboot and NOW you need to go to download mode and flash TWRP and then further like in tutorial but alternative to it could be my next custom kernel port.
I'm busy with porting the best custom kernel which i'm using on my S7 TGPKernel by djb77. I think i can today or tommorow publicate first version of this Nethunter MOD.
Execution of wifite :crying:
All right, thanks for the NetHunter kernel for the stock oreo for Samsung S7, the detail is when starting wifite I get a message to install additional components
, and the second message when downloading from github the first package "aanarchyy", I get an installation error, some way to repair it ?
, and another way to install all packages from a single installation ?, Thanks Svirusx :good:
k4mu5 said:
All right, thanks for the NetHunter kernel for the stock oreo for Samsung S7, the detail is when starting wifite I get a message to install additional components
, and the second message when downloading from github the first package "aanarchyy", I get an installation error, some way to repair it ?
, and another way to install all packages from a single installation ?, Thanks Svirusx :good:
Click to expand...
Click to collapse
I think, this is a repository problem, additional necessary components are not installed. I installed the repositories through katoolin. And now there are no problems, and always fresh libraries on nethunter.
_Danil_ said:
I think, this is a repository problem, additional necessary components are not installed. I installed the repositories through katoolin. And now there are no problems, and always fresh libraries on nethunter.
Click to expand...
Click to collapse
thanks for answering and your help, but sorry if I look a bit clumsy, but pyrit does not appear in the katoolin menu or under what name is, or could you give me a hand to install full wifite?, on the websites I visited mentioned the installation but for linux or ubuntu and with nvidia card, some clue if it serves as something for smarthphone, thanks
i download miui eu last miui 11 in Pie.
First test after install magisk , safetynet pass.
and i install cpu tweak modules, after a reboot . it turn to failed for both cts and basicintegrity.
The final step to fix it is the hiddencore module with edxposed.
But i would like to know other than that. As i never use any module in edexposed. i think magisk module are enough for me. Now i install extra magisk module ,riru-core, edexposed, hidden core just to make sure my safetynet is passed. Such a waste of power of exposed.
here is the story.
--------------------------------
My phone were clean flash( internal storage format) , and the safetynet failed after a few reboot.
i try all method as below.
-update to latest magisk 21.0
-remove the twrp folder in storage(as someone told that might trigger the failed)
-remove all cache in play store, google service framework, google play services
- use magiskhide props and change all to mi max 3.
But non of above steps solve safetynet failed.
(until this step, my phone have 0 third party app)
---
Please tell me what i missed when i flash this rom. (is weird and this safetynet failed only happen in miui.eu 11 Pie)
Have you found a solution?
Envoyé de mon MI 3W en utilisant Tapatalk
Hi guys, i ported the crDroid gsi from here.
I removed the unnecessary files from the rom, and included gapps.
And AIO fixes thanks to @DarkJoker360.
Install steps are easy.
1. Download the ROM from HERE.
2. Extract it.
3. Download Pretoriano80's TWRP from "HERE" and flash it using "fastboot flash recovery_ramdisk <path to TWRP.img>".
4. After that reboot to TWRP while holding the VOL+ and POWER button.
5. In TWRP wipe internal storage and flash "THIS" to decrypt the phone.
6. Reboot to TWRP again.
7. Reboot to bootloader while in TWRP.
8. Flash DarkJoker360's TWRP.
9. Wipe everything except Vendor.
10. Transfer the system.img from the rom to your device's internal storage.
11. Tap on Install, then tap on install image, look for the system.img and flash it as System Image and reboot.
I haven't had any bugs for now, if u find something tell me.
It doesn't work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
alexut210008 said:
It doesn't work.View attachment 5323563
Click to expand...
Click to collapse
Which TWRP recovery did you use?
At first - twrp_p10_lite_0.6_test
Then - TWRP_3.4.0-0-warsaw_DarkJoker360_20200611
alexut210008 said:
At first - twrp_p10_lite_0.6_test
Then - TWRP_3.4.0-0-warsaw_DarkJoker360_20200611
Click to expand...
Click to collapse
And none of them work? For me they both work, which version of emui are you on? I used the latest update for my phone.
is switching recoverys an important step? weird
wow this actually worked, android 11 aosp for prague booting now on my p10 lite
I did everything according to the instructions. Swears at the size of system.img
is there android 11 based crdroid gsi images you can port?
I do everything strictly according to the instructions.
LesterDMolester said:
Hi guys, i ported the crDroid gsi from here.
I removed the unnecessary files from the rom, and included gapps.
And AIO fixes thanks to @DarkJoker360.
Install steps are easy.
1. Download the ROM from HERE.
2. Extract it.
3. Download Pretoriano80's TWRP from here and flash it using "fastboot flash recovery_ramdisk <path to TWRP.img>".
4. After that reboot to TWRP while holding the VOL+ and POWER button.
5. In TWRP wipe internal storage and flash this to decrypt the phone.
6. Reboot to TWRP again.
7. Reboot to bootloader while in TWRP.
8. Flash DarkJoker360's TWRP.
9. Wipe everything except Vendor.
10. Transfer the system.img from the rom to your device's internal storage.
11. Tap on Install, then tap on install image, look for the system.img and flash it as System Image and reboot.
I haven't had any bugs for now, if u find something tell me.
Click to expand...
Click to collapse
Hi...
ok i will give you a method that i used to get it work on my p10 lite WAS-LX1A 4Gb Dual-Sim
First...if you come from latest stock rom was-lx1a 8.0.0b398c432 you need to downgrade to was-lx1a 8.0.0b394c432 with dload or how ever you prefer. cause with b398 you system partition is just 3,7Gb and can not get rezise. but with the b394 you can rezise it but its no need to. cause after encrypting with fstab.hi6250b and the known following steps...format wipe and so on...the system partition have a size from 4.5gb.
I use the Pretoriano80 TWRP 3.2.1.0 twrp_p10_lite_0.5_test.img
then after initial boot and setup the first config....you can see in apps there is superuser app...its integrate in the Rom.
For using magisk i did the following steps thanks to @Hami_Do
hang-in the system and open file manager in TWRP
delete the following
system/bin/adb_root
system/bin/abdb
system/etc/init/adb_root.rc
system/etc/init/adbd.rc
system/etc/init/su.rc
system/app/superuser
system/bin/su
system/xbin/su
flash the stock ramdisk.img
btw camera works with different modi
for magisk...thanks to @Hami_Do i use v23.0apk
then roboot to TWRP
there flash magisk v23.0-phh.zip
Works on a Was-Lx3 9.00.366 (C212)?
emui 8 stock With elemental kernel v5
Cada vez que instalo una rom personalizada desde Android 9.0, da la animación de arranque y allí se reinicia de vez en cuando hasta que termina en recuperación.
kanade266 said:
Works on a Was-Lx3 9.00.366 (C212)?
emui 8 stock With elemental kernel v5
Cada vez que instalo una rom personalizada desde Android 9.0, da la animación de arranque y allí se reinicia de vez en cuando hasta que termina en recuperación.
Click to expand...
Click to collapse
Why you dont try it? Make a Backup of your current System and return to Stock Rom cause you change Kernel and what ever more. After the initial boot configure the Stock Rom to activate Dev-Opt where you can activate OEM unlock and USB Debugging and so on...
solong
speedson
GizmoTheGreen said:
is there android 11 based crdroid gsi images you can port?
Click to expand...
Click to collapse
My charging port is broken, i won't be able to do any ports until i get it fixed, btw Android 11 GSI's are still not stable as Android 10 GSI's.
speedson said:
Why you dont try it? Make a Backup of your current System and return to Stock Rom cause you change Kernel and what ever more. After the initial boot configure the Stock Rom to activate Dev-Opt where you can activate OEM unlock and USB Debugging and so on...
solong
speedson
Click to expand...
Click to collapse
I already did that and it did not leave me the same problem that happened to the first comment I did everything that the post says
Damn, same problem:
"size of image is larger than target device"
The ROM works fine, although I notice it's quite slow when opening apps and animations. The fingerprint reader also doesn't works sometimes like if it wasn't there but is fixed after a restart.
hello all , thanks for this ROM.
I have a problem when I follow every step without any mistakes. my phone does not want to start . just leave twrp mode and open Huawei eRecovery ( download latest version and recovery * wide data/factory reset * reboot ...)
I don't know why my can't start normally .even the logo not shown
thanks in advance
It is possible to have a detailed guide how to install ?
Thanks.
Hi...
ok a repeat again....if you come from Stock Rom with latest Version called WAS-LX1A 8.0.0.398 C432 your System Partition is just 3,7Gb. You need to downgrade to 1 Version before called WAS-LX1A 8.0.0.394 C432 then the System Partition is 4,5Gb. Now you can flash this custom Rom.
For downgrade use dload method and
Huawei P10 Lite WAS-LX1 WAS-L21 hw eu Warsaw-L21A 8.0.0.394(C432) Firmware EMUI8.0 05014JNC [androidhost.ru].zip - AndroidHost.RU
Download file - Huawei P10 Lite WAS-LX1 WAS-L21 hw eu Warsaw-L21A 8.0.0.394(C432) Firmware EMUI8.0 05014JNC [androidhost.ru].zip
androidhost.ru
download the package and in there you find software/dload and there are 4 folder and 1 update_sd.zip
create a dload folder on your desktop and extrac the update_sd.zip and the 1 folder for your Device. so my is a WAS-LX1A (LX1A=L21A) cause of this i extrac the WAS-L21A folder.
put the update_sd.zip and WAS-L21A folder from downloadet package into the createt dload folder on your desktop. Now copy/paste this dload folder from desktop to external-sd card in your Device, Power off the Device and restart it with press and hold Vol-up+Vol-down+Pwr (no usb cable plugged) now the firmware update should start and wait for progress is finished.
speedson said:
Hi...
ok a repeat again....if you come from Stock Rom with latest Version called WAS-LX1A 8.0.0.398 C432 your System Partition is just 3,7Gb. You need to downgrade to 1 Version before called WAS-LX1A 8.0.0.394 C432 then the System Partition is 4,5Gb. Now you can flash this custom Rom.
For downgrade use dload method and
Huawei P10 Lite WAS-LX1 WAS-L21 hw eu Warsaw-L21A 8.0.0.394(C432) Firmware EMUI8.0 05014JNC [androidhost.ru].zip - AndroidHost.RU
Download file - Huawei P10 Lite WAS-LX1 WAS-L21 hw eu Warsaw-L21A 8.0.0.394(C432) Firmware EMUI8.0 05014JNC [androidhost.ru].zip
androidhost.ru
download the package and in there you find software/dload and there are 4 folder and 1 update_sd.zip
create a dload folder on your desktop and extrac the update_sd.zip and the 1 folder for your Device. so my is a WAS-LX1A (LX1A=L21A) cause of this i extrac the WAS-L21A folder.
put the update_sd.zip and WAS-L21A folder from downloadet package into the createt dload folder on your desktop. Now copy/paste this dload folder from desktop to external-sd card in your Device, Power off the Device and restart it with press and hold Vol-up+Vol-down+Pwr (no usb cable plugged) now the firmware update should start and wait for progress is finished.
Click to expand...
Click to collapse
Software installa failed! I have a WAS-LX1A 8.0.0.396 C432
I installed riru core from magisk manager and reboot. then i installed riru apk to verify riru installed then reboot x4. installed edxposed manager and rebooted twice. everytime i try to install edxposed framework from magisk i get redirected to github riru release page. what am i doing wrong?
Use LSposed. EdXposed hasn't been updated in ages.
Do not try to install the latest riru version.
It doesn't play nice with magisk.
Install version v25.4.4 for example.
Have that running without any problems here.
Had same issue and solved it by installing version v25.4.4 by following the video below. You can mute it and follow instructions,works beautifully.
Magisk service.d not working is that due EdXposed riru messed up something? I can see it in Magisk log but it's lying
Code:
02-10 16:22:43.785 618 1321 I : * Running service.d scripts
02-10 16:22:43.786 618 1321 I : service.d: exec [40_sdext]
dmesg
Code:
[ 38.647857] type=1400 audit(1644782200.992:1609): avc: denied { ioctl } for comm="busybox" path="/mnt/media_rw/4D47-9860/.data.sdext2.img" dev="mmcblk0p1" ino=1850 ioctlcmd=0x1272 scontext=u:r:magisk:s0 tcontext=u:object_r:vfat:s0 tclass=file permissive=1
edit: moved mount script into /data/local/tmp and created helper script in service.d which calls mount script. I don't know why but it "works" (at least the mount itself, still avc: denied)
@mlgmxyysd maybe you have any idea why this is permissive=1 and do you think it's normal that we get several avc denied in dmesg on android 10? kindly refer to Magisk github issue #5476
so this seems unrelated to EdXposed as it is same problem without any modules at all. Tried also Zygisk no success. I want to inject supolicy --live how do I do that?
It worked!! Riru 25.4.4 is the way to go, but now my edxposed manager freezes... Which version do you use? @Bunecarera @RAMBO29
Thanks
tommydotwav said:
It worked!! Riru 25.4.4 is the way to go, but now my edxposed manager freezes... Which version do you use? @Bunecarera @RAMBO29
Thanks
Click to expand...
Click to collapse
4.6.2
@Bunecarera ultimately I have it working with latest riru + lsposed