Hi there,
The phone is unlocked, the fastboot is loading and running fine without any issues, custom recovery is also can install.
But when flashing even a drain ROM (official MIUI latest and previous) through a fastboot, it does not load into the system (hanging on the Poco logo) with a bootloop. Is there a chance to flash without edl? It looks like something does not allow to boot into the system at all, because usually there should be a MIUI logo but this does not happen, perhaps some kind of boot verification or authorization mechanism is corrupted or broken (?).
Thanks.
Did you use Miflash?
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Do a factory reset in recovery mode and try again.
NOSS8 said:
Did you use Miflash?
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
Tried about 4 different ROMs - official and customs thru miflash, fastboot but not working. Just stuck on Poco logo.
user0u said:
Do a factory reset in recovery mode and try again.
Click to expand...
Click to collapse
This also didn't work. I even did an EDL through an authorized vendor and he flashed it, but it didn't work and the result is the same.
Try formatting data in custom recovery (OrangeFox recommended) before and after flashing official ROM via Miflash.
eduaaard said:
This also didn't work. I even did an EDL through an authorized vendor and he flashed it, but it didn't work and the result is the same.
Click to expand...
Click to collapse
If the EDL mode did not work, it may be a problem H.W.
NOSS8 said:
If the EDL mode did not work, it may be a problem H.W.
Click to expand...
Click to collapse
Yes, probably something happened with memory and in general with the motherboard.
Related
My bootloader is unlocked.
After installing PIE update to MIUI Global 10.3.1.0 Stable, when I try to boot OrangeFox recovery ver. R9.0-2 for Whyred using fastboot command "fastboot boot recovery.img" in CMD ( the result is shown below), the phone does NOT boot in OrangeFox recovery. It just remain stuck on MI logo after booting ...
C:\platform-tools>fastboot boot recovery.img
Downloading 'boot.img' OKAY [ 0.951s]
booting OKAY [ 0.157s]
Finished. Total time: 1.158s
Kindly advise on how to resolve the issue
Did you temporarily deactivate the Anti-Rollback-Feature with
>fastboot flash antirbpass dummy.img
where you will find the dummy.img in the official download of the Xiaomi firmware before trying to boot into recovery?
This needs to be done in the same fastboot-session that you want to boot into recovery.
NOTE 5 PRO Soft Bricked recovery bootLoop after MIUI Pie 10.3.1 Global Stable update
One more!! Hello i have a note 5 pro, yesterday it received automatic OTA update of miui 10.3.1.0.PEIMIXM with android 9.0, after install it soft bricked saying this miui version cant be installed on this device.
it lets me wipe data, which didnt help, also i connect with mi assistant using my pc suite nothing works, pc suite wont even recognize the phone on windows 10,.
PLEASE HELP! !
Kindly advise on how to resolve the issue[/QUOTE]
JosephusQuint said:
Did you temporarily deactivate the Anti-Rollback-Feature with
>fastboot flash antirbpass dummy.img
where you will find the dummy.img in the official download of the Xiaomi firmware before trying to boot into recovery?
This needs to be done in the same fastboot-session that you want to boot into recovery.
Click to expand...
Click to collapse
Many thanks for the advice. Worked like a charm. :good:
No, I did NOT deactivate the Anti-Rollback-Feature which was causing the problem.
In the past, whenever I installed custom recovery on my device including the first time, I did NOT have to flash dummy.img as my device booted into custom recovery without flashing dummy.img.
P.S.: I used dummy.img from this thread:
Everything About Anti Roll-back [Whyred]
ExoticPoint said:
One more!! Hello i have a note 5 pro, yesterday it received automatic OTA update of miui 10.3.1.0.PEIMIXM with android 9.0, after install it soft bricked saying this miui version cant be installed on this device.
it lets me wipe data, which didnt help, also i connect with mi assistant using my pc suite nothing works, pc suite wont even recognize the phone on windows 10,.
PLEASE HELP! !
Kindly advise on how to resolve the issue
Click to expand...
Click to collapse
ONLY IF you have Unlocked-Bootloader, then you can use this MIUI Flashing Guide- Method 2: Fastboot Update to unbrick your device.
Please carefully chose the firmware version (Global / India) to download the fastboot stock ROM for your device.
Lahoria said:
Many thanks for the advice. Worked like a charm. :good:
No, I did NOT deactivate the Anti-Rollback-Feature which was causing the problem.
In the past, whenever I installed custom recovery on my device including the first time, I did NOT have to flash dummy.img as my device booted into custom recovery without flashing dummy.img.
P.S.: I used dummy.img from this thread:
Everything About Anti Roll-back [Whyred]
Click to expand...
Click to collapse
Great that it solved your problem!
As addendum: The Anti-Rollback (afaik) has to be disabled every single time the recovery is changed/updated. This caught me off guard as I wanted to update TWRP from within the offical TWRP app. This failed and made my recovery unusable (Although I could still normally boot into system).
So let this be a cautionary tale to people.
I can't boot to my custom recovery in my redmi note 5. it is booting to the original recovery. I tried TWRP and REDWOLF recoveries . It will boot in the first time, then I reboot my phone after that when I reboot, it is booting to the original recovery. Same happened when I tried RED WOLf recovery. Pls help me.
Ayyappadas said:
I can't boot to my custom recovery in my redmi note 5. it is booting to the original recovery. I tried TWRP and REDWOLF recoveries . It will boot in the first time, then I reboot my phone after that when I reboot, it is booting to the original recovery. Same happened when I tried RED WOLf recovery. Pls help me.
Click to expand...
Click to collapse
After flash twrp, just flash magisk zip through twrp recovery...
Hello
i have a Mi Max 3 , it came with CN ROM.
i unlocked with the unlocked tool.
I tryed to flash the phone with flashing tool with a global room.
But the phone is stucked in the fastboot even with adb command.
When i try to flash again i get error "no crc list ".
I enter the recovery mode and wiped all data but is still stuck.
What can i do to flash to a Global ROM and get out of fastboot?
Thanks
iscac7558 said:
Hello
i have a Mi Max 3 , it came with CN ROM.
i unlocked with the unlocked tool.
I tryed to flash the phone with flashing tool with a global room.
But the phone is stucked in the fastboot even with adb command.
When i try to flash again i get error "no crc list ".
I enter the recovery mode and wiped all data but is still stuck.
What can i do to flash to a Global ROM and get out of fastboot?
Thanks
Click to expand...
Click to collapse
You might do something wrong on miflash tool. Retry but I never used this
It's possible to flash global on cn if bootloader is unlocked.
BTW why not flashing orangefox twrp and flash miui with it ? Xiaomi.eu or any other modded miui ?
Regards
Sent from my MI MAX 3 using XDA Labs
Same issue
My max3 china rom change to global rom
Stuck at fastboot please help me
iscac7558 said:
Hello
i have a Mi Max 3 , it came with CN ROM.
i unlocked with the unlocked tool.
I tryed to flash the phone with flashing tool with a global room.
But the phone is stucked in the fastboot even with adb command.
When i try to flash again i get error "no crc list ".
I enter the recovery mode and wiped all data but is still stuck.
What can i do to flash to a Global ROM and get out of fastboot?
Thanks
Click to expand...
Click to collapse
When you flashed global rom with tool you needed to choose option to only wipe data but you chose flash and lock hence stuck in EDL mode now. Need to have someone with permissions remove it but it take you to open back off phone and do test point. I did same thing as you guys and found a guy you got my phone back. It's an easy error to make and it's why phone will go to fastboot when try to boot. You needed to change option. Try unlock bootloader as if flash work it will boot then when bootloader unlocked
If your bootloader is still unlocked then check the version of global rom your flashing as need a fastboot version not recovery
have you solved your issue?
iscac7558 said:
Hello
i have a Mi Max 3 , it came with CN ROM.
i unlocked with the unlocked tool.
I tryed to flash the phone with flashing tool with a global room.
But the phone is stucked in the fastboot even with adb command.
When i try to flash again i get error "no crc list ".
I enter the recovery mode and wiped all data but is still stuck.
What can i do to flash to a Global ROM and get out of fastboot?
Thanks
Click to expand...
Click to collapse
hi i was wondering if you were able to solve your issue. i have the exact same problem, any help would be sincerely appreciated.
nice1nice said:
hi i was wondering if you were able to solve your issue. i have the exact same problem, any help would be sincerely appreciated.
Click to expand...
Click to collapse
Hi there,
I encountered the same issue. I tried to flash some CN Rom without enough research, without knowing that you can't just flash an Android 10 rom from 9 directly by recovery (even TWRP). So I ended up Fastboot or TWRP but never able to boot into system. Fortunately I didn't flash my Max3 by fastboot rushly, so my phone was still unlocked.
This is how I solved it:
1. Download an official CN ROM (the below I used is MIUI 11 with Android 9.9.x);
I can't post link here but search "miui通过线刷升级" - you shall see a miui.com link ending with shuaji-393.html. That's the page I download the Mi Max3 ROM from.
2. Use MiFlash to flash the official ROM with the flash option "clean all", NOT "clean All and lock";
3. The phone shall reboot into system, give it 5-10 minutes;
4. Flash the miui.eu ROM you like (DO make sure it is Android 9 tho) by recovery (tutorial given under every official xiaomi.eu ROM download).
Again it's easy to search
It took me less than an hour to do it (I don't have much experience with new XiaoMi phone). So don't worry about bricking your phone forever.
Hope it helps to destress
I tried to flash MIUI global 12.0.7.0 through fastboot and now my phone just boots to fastboot, and recovery, which doesn't give me anything. Can't flash it through Mi Flash tool
So you have another time Mi recovery 3.0? Try to flash twrp recovery developed by geoanto555 (you can find here in XDA) and flash another rom. Also my mi 10 was bricked and I flashed MIUI 12.5 and now it's ok.. I think now there is the stable version too
Divolka said:
I tried to flash MIUI global 12.0.7.0 through fastboot and now my phone just boots to fastboot, and recovery, which doesn't give me anything. Can't flash it through Mi Flash tool
Click to expand...
Click to collapse
Similar thing happened to me, this might help - https://forum.xda-developers.com/t/guide-tip-failed-fastboot-flashing-of-stock-rom.4232797/
_mysiak_ said:
Similar thing happened to me, this might help - https://forum.xda-developers.com/t/guide-tip-failed-fastboot-flashing-of-stock-rom.4232797/
Click to expand...
Click to collapse
found it on my own and it worked like a charm, but thanks!
After trying to install a custom ROM (PixelExperience for OnePlus 7T [hotdogb]) via fastboot, the installation flashing ended with errors with "no such partition" for odm, product and system I tried everything to get out of the fastboot screen loop. After finding a bat file with IMG files which got me on the Android 11 Beta 1. build (still no WiFi)
What can I do to fix the partition error to get on the Pixel Experience ROM or even get back to the stable build - I did try MSM but it isn't listing the phone even after pressing ENUM.
Please help...
Context (can skip): The latest stable build OOS for my 7T had issues with the microphone not working and so I decided to do a factory reset which resulted in having a clean install but now, WiFi doesn't connect for some reason. After trying some fixes I decided to install a custom ROM.
U need to flash stock recovery (fastboot flash recovery recovery.img) as twrp prevents fastbootD entry. Then type fastboot reboot fastboot to enter fastbootD. Then flash your rom. Personally, I just flash roms via Chinese twrp or 3.5.10 twrp
HueyT said:
U need to flash stock recovery (fastboot flash recovery recovery.img) as twrp prevents fastbootD entry. Then type fastboot reboot fastboot to enter fastbootD. Then flash your rom. Personally, I just flash roms via Chinese twrp or 3.5.10 twrp
Click to expand...
Click to collapse
that was my process for the first try - entered fastbootD for the flashing process which ended with the mentioned partition error and the fastboot loop. I realised that TWRP version I got from TOOL ALL IN ONE wasn't going to work as it couldn't access data no matter what.
No twrp can decrypt oos or a11 custom roms data. Chinese twrp can access data only on a10 custom roms if u remove screen lock before booting into twrp for backup
What do you reckon I try this time then?
itssata said:
What do you reckon I try this time then?
Click to expand...
Click to collapse
[OP7T][OOS 11.0.5.1 HD65AA/BA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
1. Boot into fastboot mode. To do this, restart your device, then press the volume down key until the fastboot screen appears.
2. Connect your device to PC/laptop.
3. Now to install the recovery, enter "fastboot flash boot boot.img" or you can drag the image to cmd "fastboot flash boot (drag file)"
It is important to have your own boot.img, it does not load on all firmwares. To boot, you need to flash it in OrangeFoxboot to the boot section.
Does this work on android 12 (MIUI 13.0.5 global) ?
mangi. k said:
It is important to have your own boot.img, it does not load on all firmwares. To boot, you need to flash it in OrangeFoxboot to the boot section.
Click to expand...
Click to collapse
Hi guy,
I don't really understand what you mean ?? are you succeed in flashing Orange Recovery ?
What is OFRP-agate-boot-1.img ? Is it necessary to rename this file to "boot.img" and then flashing it via fastboot ?
To sum up, to install orange recovery, do I have to flash the file in the link via fastboot ?
Greetings, I wanted to know if someone has been able to install this Recovery on Xiaomi mi 11T Amber
felixpaz1992 said:
Greetings, I wanted to know if someone has been able to install this Recovery on Xiaomi mi 11T Amber
Click to expand...
Click to collapse
Man could you try flashing this on a11
Stephanizgo said:
Man could you try flashing this on a11
Click to expand...
Click to collapse
I tried it like TWRP, but it only remains in the fox logo, not whether I'm skipping something or it's the IMG 1ue that doesn't work
felixpaz1992 said:
I tried it like TWRP, but it only remains in the fox logo, not whether I'm skipping something or it's the IMG 1ue that doesn't work
Click to expand...
Click to collapse
I booted on MIUI 14 but could not boot system
Please show me your kernel version if it's also 4.14.186 I want to know if this phone was EOL from the day it shipped