Related
ok! where to even start...
I like many got this 2in1 at wal-mart and I live it. unfortunately I like many am not yet familiar with the new UEFI bootloader bios SOC stuff
heres what I do know and please correct me if im wrong. also please tell me if this 2 in 1 is and can be flashed the same as the asus t100
ok the Flexx11 has a bayntrail-t CR quad core processor 1.33-1.83ghz model Z3735F the t100 is3740
11.6" screen ips touchscreen at 1366x768 res
Efun is the corp and yifang vers.NX1106.1.02.008\139
THE BIOS IS YFG0315009112
it is a 32bit EFI bootloader
the reason I mention all of this is I have tried several times to dualboot androoid and each time ruined the computer and had to return it and I simply no longer wish to return it and love it to much to get something else
the first try the time began to lag and was unfixable for some reason the second time i somehow lost the keys booting and formatted wrong or something and the tablet bricked it would remain black with keyboard lit and no button combo could get it back no boot at all.
I am currently using AMIDUOS to run android kitkat and I love it but from what I understand it isnt compatible with win10 and really still isnt the same as the full android being on the tablet although really really close and awesome
but honestly I have been doing this stuff for years and now with this new windows secure boot and system on a chip stuff im lost
ever get anywhere with this?
I'm curious as well.
It has to be possible. I say that because I recently owned a ChuWi dual-boot device with the same Baytrail processor and SOC.
I wonder if it wouldn't be possible to take a system dump from one of the chuwi dualboot devices and flash it to the nextbook.
Sent from my Ascend Mate 2 using XDA Free mobile app
I'm also interested in doing this. It appears that the Nextbook Ares has the same hardware (minus 1GB RAM) but has Android. I contacted Nextbook to see if I could get a copy of the Ares Android firmware but was denied. If someone with the Ares could upload a backup that would be helpful.
I was finally able to get this working using this method...
https://hitricks.com/guide-how-to-dual-boot-remix-os-with-windows-uefi-legacy
So far I was able to get it to boot from a partition on the main drive as a test. In the process of installing to a secondary partition on my sd card. We'll see how it goes.
I wasnt able to get the boot menu that he shows but after going through the steps I then had an Android OS boot option in the bios boot menu. Pretty awesome! Runs great. Tried running Dead Trigger 2 as a test with full graphics. Ran perfectly.
I just bought one of these yesterday, and it shipped with Windows 10 Home 32-bit. I'm trying to install the 64-bit version but it won't boot from USB. Turns out it doesn't support 64-bit OSes. Where can I find recovery images for this? I messed up and now I don't have audio or touchscreen drivers.
64 bit processor?
I just bought one of these yesterday, and it shipped with Windows 10 Home 32-bit. I'm trying to install the 64-bit version but it won't boot from USB. Turns out it doesn't support 64-bit OSes. Where can I find recovery images for this? I messed up and now I don't have audio or touchscreen drivers.
Click to expand...
Click to collapse
Alright, I'm slightly confused now. Looking at system specs for mine it says it has an x64 based processor. Doesn't that mean it should be able to handle 64-bit OS? Even though it comes with 32-bit? If possible I would like to put 64-bit on it as well, but I'd like to be sure that that's not going to break it.
GeneticJulia said:
Alright, I'm slightly confused now. Looking at system specs for mine it says it has an x64 based processor. Doesn't that mean it should be able to handle 64-bit OS? Even though it comes with 32-bit? If possible I would like to put 64-bit on it as well, but I'd like to be sure that that's not going to break it.
Click to expand...
Click to collapse
It just won't boot the USB. At all. Unless it's 32-bit.
rowdyrocket said:
I was finally able to get this working using this method...
https://hitricks.com/guide-how-to-dual-boot-remix-os-with-windows-uefi-legacy
So far I was able to get it to boot from a partition on the main drive as a test. In the process of installing to a secondary partition on my sd card. We'll see how it goes.
I wasnt able to get the boot menu that he shows but after going through the steps I then had an Android OS boot option in the bios boot menu. Pretty awesome! Runs great. Tried running Dead Trigger 2 as a test with full graphics. Ran perfectly.
Click to expand...
Click to collapse
I'm loving Remix OS on here with dual boot. Having some issues though and I really want this to work.
Main and I mean main issue is no sound at all, no rotation is next in line and Bluetooth isn't working. Everything else works great.
This is so awesome its like Android lollipop with windows desktop functionality. Now if I can get the bugs fixed I will be in android hog heaven.
GREAT FIND BRO!!!!! EXACTLY what I was looking for maybe even better than.
for those interested here is the XDA section for all things REMIX OS
http://forum.xda-developers.com/remix
By the way for those who may want to know I installed dual boot onto the hard drive it went with no issues.Here's some tips for flexx 11
1. I used a partition manager such as easy partition manager to partition the C: drive regardless of what the tutorial said. Couldn't use windows disk management. I deleted the recovery for an extra 5 gigs (make a backup if you do) I used about 19 gigs from the C: drive and made an E: NTFS.
2.Also do not use the remix files from that tutorial use the ones here from the main site http://www.jide.com/remixos-for-pc they are newer and the ones from the other post where incomplete. Also the newer ones on the site now include OTA updating which is totally awesome.
3. I'm hoping this will help someone..... After I was all finished I expected it to dual boot as any other dual boot restart and then i would see options for the OS's not the case here I got stuck on this I was using easy BCD and trying all sorts of stuff, once I looked at the tut a little closer I realized you don't need any of that. Once your all done do a restart and it will go back to windows as usual. Now go to settings, then recovery, then advanced startup and choose from devices I think its the second option on the left list. There you will find Android OS click that and it will take you to your dual boot options. Sounds a lot more complicated than it really is. But believe me once you know this your better off.
And that's all I've got please and I mean please post here with any fixes especially for sound and if you have questions I will try to help.
Thanks
PS: I AM GETTING OCASIONAL LOCK UPS, MEANING THE OS FREEZES AND I HAVE TO RESTART BY HOLDING POWER.
Im not sure if this is good news or not...
Using the methos outlined I was not able to get audio bluetooth autorotate and other things to work but after a bit of digging I found out that remix os has an image specifically for nextbook baaytrail (Our PC) here: http://www.jide.com/remixos/devices
click other upper left.....
I cannot find instructions to install this though and using the other install instructions from here fail because the only part of the file to replace is the system image.
I also attempted the other install methods and easy BCD does not work for this PC
So if anyone can help to install this file specifically for our computer as well as verify that it works and what works and how you installed would be great
OK this is really cool I have made headway sort of.
I have installed kit kat android-x86-4.4-r3.img using the Androidx86-Installv24-5800.exe installer and i have rotation, root and it works pretty good for the most part wifi works great so far no bluetooth, it freezes during shut down and the major issue as in most cases is the sound. Im not sure about the camera now that I think about but i will check and report back here.
I really want the sound working on this and I woud be bigtime happy this forum could be solved as far as im concerned
From what I understand there is a bug with baytrail and linux where the spp port is pointed automatically to the usb or something. but for the life of me after weeks of scouring the internet cannot find a laymens guide to a simple fix for this. I'm really not even sure there is one because I'm yet find a rock solid confirmation of a solution
Update: camera doesn't work either
So far the 4.4.3 port is the best. I just can't seem to find any help whatsoever so its looking like so close yet so far away. Its a pure shame that audio and a few other major bugs are the only things in the way of this being a fully working and easy dual boot method.
I have bought a nextbook flexx10 but am unable to install remix OS. I have followed all the steps highlighted before.
1. partitioned the drive with gparted to make a 10G NTFS drive
2. downloaded android x86 5.1.1 iso and remix iso from jide website.
3. used android installer and android 5.1.1 iso to install the image
4. used 7zip to uncompress the remix iso
5. then copied over the 4 necessary files from remix to the drive to the android drive
6. copied over grub.cfg
Now, I do see the entry for androidOS but when I select that, I just get a message at the center of my screen that says "AndroidOS boot failed" and a blue OK button in DOS like font. thats it.. I am interested in knowing if any additional BIOS settings needs to be tweaked.
furthermore, I have tried installing android x86 6.0 by formating the same partition as ext4. All proceeded well and i got to the last screen that said "Run android-x86 now" or reboot. I removed the USB and was able to get into android. (some missing functionality). But when i reboot into windows and try to boot into androis, I get the same message of Andoid boot failed..
Thus I need to know if there's some BIOS settings related to permissions or sorts that i'm missing.
thanks
murlig123 said:
I have bought a nextbook flexx10 but am unable to install remix OS. I have followed all the steps highlighted before.
1. partitioned the drive with gparted to make a 10G NTFS drive
2. downloaded android x86 5.1.1 iso and remix iso from jide website.
3. used android installer and android 5.1.1 iso to install the image
4. used 7zip to uncompress the remix iso
5. then copied over the 4 necessary files from remix to the drive to the android drive
6. copied over grub.cfg
Now, I do see the entry for androidOS but when I select that, I just get a message at the center of my screen that says "AndroidOS boot failed" and a blue OK button in DOS like font. thats it.. I am interested in knowing if any additional BIOS settings needs to be tweaked.
furthermore, I have tried installing android x86 6.0 by formating the same partition as ext4. All proceeded well and i got to the last screen that said "Run android-x86 now" or reboot. I removed the USB and was able to get into android. (some missing functionality). But when i reboot into windows and try to boot into androis, I get the same message of Andoid boot failed..
Thus I need to know if there's some BIOS settings related to permissions or sorts that i'm missing.
thanks
Click to expand...
Click to collapse
Sorry for the late reply, use the installer and create a separate drive using C: like a D: or E: and get android 4.4 the .IMG that should work for you and the installer should do everything for you.
So use the uefi android installer after you partition a drive to load android 4.4 the uefi IMG
Its just going to piss you off though because there's no audio and seemingly no way to fix it, which is a crying shame ��
P.S. typically secure boot is off in the bios on this machine, but if by any chance you turned it on or the newer ones come that way make sure it is off or this will not work.
UEFI Settings
So I can get to a menu with 6 icons (2 rows and 3 columns) by running the "shutdown.exe /r /o" command and then going to Troubleshoot>Advanced Options>UEFI Firmware Settings and clicking restart. The problem is that when I get to this menu the touchscreen and keyboard do not work, and I can only move the highlighter up and down, not left and right. Hopefully one you guys have figured this out. I contacted the Nextbook support desk and they were no help at all.
korycooper said:
So I can get to a menu with 6 icons (2 rows and 3 columns) by running the "shutdown.exe /r /o" command and then going to Troubleshoot>Advanced Options>UEFI Firmware Settings and clicking restart. The problem is that when I get to this menu the touchscreen and keyboard do not work, and I can only move the highlighter up and down, not left and right. Hopefully one you guys have figured this out. I contacted the Nextbook support desk and they were no help at all.
Click to expand...
Click to collapse
Okay. So I was able to test this one of my co workers Nextbook and it seems like its a problem with mine.
This might be beneficial for us Flexx 11 users. It's a full port of Remix 2.0 to the Ares 8 with everything working except the camera rotation issue. Very promising. I've heard the hardware is similar. Working on attempting to install on mine. Anyone else tried it?
http://forum.xda-developers.com/remix/supported-devices/port-remix-os-2-0-nextbook-ares-8-t3498015
Hey guys,
NextBook Flexx 11, 64Gb, NXW116QC264, Windows 10
I'm really interested in trying to install Remix OS in Dual boot. However, in my trials, I goofed up my tablet. I found an image, but it turned out to be a Windows 8.1 image, and it wiped everything from my tablet. I had originally had Windows 10 on it.
Could someone perhaps be able to send me the recovery partition of their Nextbook; as long as they had Win10 installed. Maybe if I dump a Win10 recovery partition, I can do a repair on it and restore Win10 to the system.
I can't find the stock/factory rom for the Win10 version of the Flexx.
Thanks in advance,
Kori
KorishanTalshin said:
Hey guys,
NextBook Flexx 11, 64Gb, NXW116QC264, Windows 10
I'm really interested in trying to install Remix OS in Dual boot. However, in my trials, I goofed up my tablet. I found an image, but it turned out to be a Windows 8.1 image, and it wiped everything from my tablet. I had originally had Windows 10 on it.
Could someone perhaps be able to send me the recovery partition of their Nextbook; as long as they had Win10 installed. Maybe if I dump a Win10 recovery partition, I can do a repair on it and restore Win10 to the system.
I can't find the stock/factory rom for the Win10 version of the Flexx.
Thanks in advance,
Kori
Click to expand...
Click to collapse
Just to be clear...(and this goes for everyone wondering in the future) it was windows 10, from the factory??? Last i checked
they only shipped with windows 8.1 or android, depending on the model...If not and you put windows 10 on there, back when it was free, you just use the media creation tool from Microsoft to update windows 8.1 to Windows 10 (after restoring windows 8.1)... it can do this because most tablets have unchangeable hardware, so no cd key is required...it's like how your md5 hash verifies your downloaded files, Windows provides Microsoft with your hardwares md5 hash signature and if it is in the list, then it activates the pc/tablet... but, it only works if you got it free, not if you bought it... if you bought win10 then you will need your cd-key when you re-install, while the other steps are same as above... just note, that for the free upgrade there was NO cd-key, therefore in that instance, if it asked you for a key, you would leave it blank, which you can do in any case, and add your key in from Windows if needed...
And... as for the others having sound issues in Android, I read something about a reason for that having to do with something called an... 'audio stack', I think it was??? Not 100% sure what it meant, but basically, it is designed so the audio hardware only works in windows, I think... (so they can make more money, by making you buy the android tablet separately...)
hope this helps someone who stumbles upon this thread...
Wiebenor said:
Just to be clear...(and this goes for everyone wondering in the future) it was windows 10, from the factory??? Last i checked
they only shipped with windows 8.1 or android, depending on the model...If not and you put windows 10 on there, back when it was free, you just use the media creation tool from Microsoft to update windows 8.1 to Windows 10 (after restoring windows 8.1)... it can do this because most tablets have unchangeable hardware, so no cd key is required...it's like how your md5 hash verifies your downloaded files, Windows provides Microsoft with your hardwares md5 hash signature and if it is in the list, then it activates the pc/tablet... but, it only works if you got it free, not if you bought it... if you bought win10 then you will need your cd-key when you re-install, while the other steps are same as above... just note, that for the free upgrade there was NO cd-key, therefore in that instance, if it asked you for a key, you would leave it blank, which you can do in any case, and add your key in from Windows if needed...
And... as for the others having sound issues in Android, I read something about a reason for that having to do with something called an... 'audio stack', I think it was??? Not 100% sure what it meant, but basically, it is designed so the audio hardware only works in windows, I think... (so they can make more money, by making you buy the android tablet separately...)
hope this helps someone who stumbles upon this thread...
Click to expand...
Click to collapse
I realize this is a dead thread, but I had to chime in... I bought my NextBook Flexx 11 from Walmart 3 or 4 years ago and it shipped with Windows 10 Home, not Windows 8.1... However, IMHO, Windows 10 is a resource hog on this little device. I'm currently looking in to installing Linux...
I was going to wait for this device to be added to devdb to make a release thread, but that's being delayed, if it'll ever happen. So, I'm making this thread as a placeholder. No big fancy text, just a known problem list and the release. If you're looking for this, you probably know what to do with it. Everything should work from flashing to backup and restore from all external media. If it doesn't, please report it.
KNOWN PROBLEMS:
1. This is a multirom edition of twrp, but there's no multirom support yet.
2. My wireless keyboard / mouse combo (an old Logitech MX something or another) fails to initialize the mouse on boot. I have to unplug and replug the USB receiver for the mouse to work. My wired mouse doesn't do this. I'm curious if anyone else sees a similar problem or if there's something weird with my hardware.
SOURCE:
device (branch cm-12.1-mrom)
kernel
vendor
CURRENT RELEASE:
For Android M:
twrp-20160222-UNOFFICIAL-foster.img
Known Issue: This release does not work on 4K displays. It boots to a black screen. Please use a 1080p display for TWRP until this is fixed.
For Android L:
twrp-multirom-20151112-UNOFFICIAL-foster.img
OLD RELEASES:
twrp-multirom-20150630-UNOFFICIAL-foster.img
twrp-multirom-20150624-UNOFFICIAL-foster.img
twrp-multirom-20150613-UNOFFICIAL-foster.img
MultiRom will be a must have on this device.
I really appreciate your work, and reading the various thread on xda I found out that you're one of the best developers for Nvidia Shield devices.
Without people like you we would all be locked in a large digital cage.
Compliments
Thanks Steel01!
I'm starting to slowly look at what I can disable in the kernel to shrink it down enough to fit in the recovery partition. Unfortunately, my first two ideas, network and sound, can't be unilaterally removed due to the android USB gadget (used for adb) depending on them. I've got it down to 26 MB, but iI dont know if it still boots. I'll try a few more things and hopefully have something working in the next couple days. I'm also hoping Tasssadar merges the 2.8.7.0 changes soon, the resize functionality will be useful (in testing I somehow shrunk my user data partition to 11 GB and had to reformat it get the full 4?? GB back).
Or it could be quicker than I thought. Todays test was successful. It's small enough to barely fit in the partition and appears to work correct. The link is in the OP. The next update to the multirom TWRP will probably make it too big again and I'll have to rip some more stuff out...
I want to install twrp recovery on my 16gb Shield, but i have no need for multirom. Is there an option to bypass the boot option or should I wait for a standard TWRP?
You didn't take much of a break before going back at it again. Thanks for your dedication!
Well, I'm not going back at it fully yet. Next week and a half will likely be pretty busy. I'm just doing a piece here and there.
This TWRP has multirom support, but does not require it or even set it up by default. In fact, to enable multirom, you have to install a separate zip (which I haven't released because it doesn't work). So no, you won't see any extra boot screens with this.
A standard TWRP build should be simple to make with the sources I've linked in the OP. I haven't released one here (or on any device I support) because I don't want to support it directly (basically, I'm supporting what I use myself). If no one else makes one, I might make a one time build for those that want it.
Hi Steel01, thanks for your efforts. I am a rookie at best at this, however, I managed to get this installed to my 16 gb shield tv, all appears to work fine, except I am unable to pair the shield remote, the shield game controller paired fine, but not the remote, just curious is this is expected, or maybe something wrong on my end. Also, If I wanted to load another rom at some point, is it as simple as booting to the twrp screen and selecting install? Hope that doesn't sound like a dumb question, I'm just a little unsure of that exact process. thanks
Remote controller fix
cdsn99 said:
Hi Steel01, thanks for your efforts. I am a rookie at best at this, however, I managed to get this installed to my 16 gb shield tv, all appears to work fine, except I am unable to pair the shield remote, the shield game controller paired fine, but not the remote, just curious is this is expected, or maybe something wrong on my end. Also, If I wanted to load another rom at some point, is it as simple as booting to the twrp screen and selecting install? Hope that doesn't sound like a dumb question, I'm just a little unsure of that exact process. thanks
Click to expand...
Click to collapse
Do not worry and follow these simple steps to fix your remote controller problem:
This is quite normal after a system reset or wipe.
If the remote did not connect:
If the microphone symbol is not flashing, hold down the back and home buttons at the same time until it flashes (3 seconds).
If the microphone symbol does not flash after holding for 3 seconds, charge the remote and try again.
To charge the remote, connect it to one of the USB ports on the back of your SHIELD with the included USB cable or connect it to another USB power source.
---------- Post added at 06:08 AM ---------- Previous post was at 06:01 AM ----------
cdsn99 said:
Hi Steel01, . Also, If I wanted to load another rom at some point, is it as simple as booting to the twrp screen and selecting install? Hope that doesn't sound like a dumb question, I'm just a little unsure of that exact process. thanks
Click to expand...
Click to collapse
Yes with TWRP it is very easy to flash a new rom, it is also recommended to use the recovery roms for updating your system.
Instead of running the OTO updates because this will undo your Root modification and reinstall the original recovery partition.
Download the correct firmware from this forum from the nvidia developers network, place it on a SD card boot to recovery and flash.
As a final suggestion have a look at the Flashify utllity (not compatible yet) or similar from the appstore, that a simple front end for flashing & backing up boot and recovery partitions. And it will enable you to boot to recovery in one click.
I have TWRP running on my Shield Portable / Shield Tablet without any problems.
Enjoy
Josti-Band said:
Do not worry and follow these simple steps to fix your remote controller problem:
This is quite normal after a system reset or wipe.
If the remote did not connect:
If the microphone symbol is not flashing, hold down the back and home buttons at the same time until it flashes (3 seconds).
If the microphone symbol does not flash after holding for 3 seconds, charge the remote and try again.
To charge the remote, connect it to one of the USB ports on the back of your SHIELD with the included USB cable or connect it to another USB power source.
---------- Post added at 06:08 AM ---------- Previous post was at 06:01 AM ----------
Yes with TWRP it is very easy to flash a new rom, it is also recommended to use the recovery roms for updating your system.
Instead of running the OTO updates because this will undo your Root modification and reinstall the original recovery partition.
Download the correct firmware from this forum from the nvidia developers network, place it on a SD card boot to recovery and flash.
As a final suggestion have a look at the Flashify utllity (not compatible yet) or similar from the appstore, that a simple front end for flashing & backing up boot and recovery partitions. And it will enable you to boot to recovery in one click.
I have TWRP running on my Shield Portable / Shield Tablet without any problems.
Enjoy
Click to expand...
Click to collapse
Thanks Josti-Band , that fixed my remote, I appreciate it greatly. Thanks also for the info on flashing, I'm still have one more question, when I flashed the img file from this thread TWRP, did I change the rom or just the recovery? It seems like the rom is the original that was on the shield tv, If rom was not changed do you or anyone else have a recommendation. Thanks again for the assistance.
cdsn99 said:
Thanks Josti-Band , that fixed my remote, I appreciate it greatly. Thanks also for the info on flashing, I'm still have one more question, when I flashed the img file from this thread TWRP, did I change the rom or just the recovery? It seems like the rom is the original that was on the shield tv, If rom was not changed do you or anyone else have a recommendation. Thanks again for the assistance.
Click to expand...
Click to collapse
No Problem, Your Shield TV has basically 3 partitions (to keep it simple)
1) Boot
2) Recovery
3) OS/Data (Rom)
With the steps you have followed
a) you unlocked your 1) bootloader, to enable the installation of unsigned packages to make this possible your personal data was erased/wiped from the 3) OS/Data partition.
b) Then you applied a new TWRP image to the recovery partition an replacing the old one.
So your 3) OS/Data (Rom) is still the original one you only wiped the personal data clean when unlocking the bootloader, this also the partition you will write your updated recovery images to. And stay updated.
I have TWRP running on my Shield Portable / Shield Tablet without any problems.
Enjoy[/QUOTE]
Josti-Band said:
No Problem, Your Shield TV has basically 3 partitions (to keep it simple)
1) Boot
2) Recovery
3) OS/Data (Rom)
With the steps you have followed
a) you unlocked your 1) bootloader, to enable the installation of unsigned packages to make this possible your personal data was erased/wiped from the 3) OS/Data partition.
b) Then you applied a new TWRP image to the recovery partition an replacing the old one.
So your 3) OS/Data (Rom) is still the original one you only wiped the personal data clean when unlocking the bootloader, this also the partition you will write your updated recovery images to. And stay updated.
Click to expand...
Click to collapse
Thank you, that makes better sense, I will try and load a rom and gapps and see how it goes. thanks again for the assistance
Steel01 said:
2. My wireless keyboard / mouse combo (an old Logitech MX something or another) fails to initialize the mouse on boot. I have to unplug and replug the USB receiver for the mouse to work. My wired mouse doesn't do this. I'm curious if anyone else sees a similar problem or if there's something weird with my hardware.
Hi Steel01 , I have a logitech k400r wireless keyboard and mouse, it seemed to work ok, except was very laggy, had to wait for it a few seconds each time I went to move the mouse, and sometimes mouse would freeze.
Click to expand...
Click to collapse
I have edited and deleted the orginal text from this post,and moved it to it's own thread. I realized I was beginning to hijack steels thread, I couldn't find a way to just delete the whole post, sorry.
Tassadar merged TWRP 2.8.7.0 into his multirom twrp fork today. So I ran new builds for everything I support. Unfortunately, I have not been able to test this device (TV's been busy all night), so YMMV. The other builds came off fine, so I don't see why this one should have any problems the last build didn't. Of interest in this build is the partition resize feature. So if someone does something weird like I did and ends up with an 11 GB data partition on the pro, it'll be *much* easier and quicker to fix now. Build is in the OP.
Steel01 said:
Tassadar merged TWRP 2.8.7.0 into his multirom twrp fork today. So I ran new builds for everything I support. Unfortunately, I have not been able to test this device (TV's been busy all night), so YMMV. The other builds came off fine, so I don't see why this one should have any problems the last build didn't. Of interest in this build is the partition resize feature. So if someone does something weird like I did and ends up with an 11 GB data partition on the pro, it'll be *much* easier and quicker to fix now. Build is in the OP.
Click to expand...
Click to collapse
What about the kexec-hardboot patch ? Do you have already tried it ?
The others binary for multirom execution are the same for all arm64 devices like the nexus 9 or we need a specific build for shield ? I never played with multirom stuff. There are specific problems to solve ? In case i can help you with experiments if you don't have much time.
P.S.
I tried your patch for the framework and all others new Nvidia binary + resigned private apk like blakepairing and others. But this year Nvidia added many others things to the framework. You can see by yourself with dex2jar.
It's a shame that for a stupid controller there are all this bloatware inside the firmware. Very bad behaviour, that a so big company not publish drivers for an hardware that we have bought. Fortunately we can use also better wireless controllers. But this fact really remove 10000 points from Nvidia as good company.
I've worked very little on the multirom side of things. The kernel repo has a mrom branch with a kexec patch, which still boots to stock. However, there's something getting triggered in the multirom init program that is skipping the boot screen. I haven't tried to track that down yet.
The controller part is off-topic, but there isn't really anywhere else to discuss it yet. Maybe I'll open a CM thread for discussion and put not working in bold at the top. Anyways, the framework patches work with the blakepairing shipped with the Shield TV, that's what I ship with my portable and tablet builds. But you have to deodex and stuff the class file back in the apk. Or easier, use the one in my vendor repo and just resign it. That should at least run. On a side note, the underlying technologies are all open source. WiFi Direct, wps, hid, etc. It just a standard USB hid controller with a WiFi chip and USB sound card. It's driven by an xmega (iirc) as well, those are all pretty open. It's obfuscation atm that stops me from completely reimplementing the pairing open source.
Steel01 said:
I've worked very little on the multirom side of things. The kernel repo has a mrom branch with a kexec patch, which still boots to stock. However, there's something getting triggered in the multirom init program that is skipping the boot screen. I haven't tried to track that down yet.
The controller part is off-topic, but there isn't really anywhere else to discuss it yet. Maybe I'll open a CM thread for discussion and put not working in bold at the top. Anyways, the framework patches work with the blakepairing shipped with the Shield TV, that's what I ship with my portable and tablet builds. But you have to deodex and stuff the class file back in the apk. Or easier, use the one in my vendor repo and just resign it. That should at least run. On a side note, the underlying technologies are all open source. WiFi Direct, wps, hid, etc. It just a standard USB hid controller with a WiFi chip and USB sound card. It's driven by an xmega (iirc) as well, those are all pretty open. It's obfuscation atm that stops me from completely reimplementing the pairing open source.
Click to expand...
Click to collapse
Already tried all. deodexed and resigned stock stuff, also used your framework patch and your (resigned) apks . not work in shield console. as i write above in shield console there are others proprietary things in the framework. Tested also with your wpa_supplicant and hostapd but the result does not change.
In any way i will retry
We can discuss in a separate thread. sorry for off-topic. can be useful also for others developers
This is very interesting, please continue with this work! Would be great to get the remote working on other ROMs.
Thanks!
Steel01 said:
I've worked very little on the multirom side of things. The kernel repo has a mrom branch with a kexec patch, which still boots to stock. However, there's something getting triggered in the multirom init program that is skipping the boot screen. I haven't tried to track that down yet.
The controller part is off-topic, but there isn't really anywhere else to discuss it yet. Maybe I'll open a CM thread for discussion and put not working in bold at the top. Anyways, the framework patches work with the blakepairing shipped with the Shield TV, that's what I ship with my portable and tablet builds. But you have to deodex and stuff the class file back in the apk. Or easier, use the one in my vendor repo and just resign it. That should at least run. On a side note, the underlying technologies are all open source. WiFi Direct, wps, hid, etc. It just a standard USB hid controller with a WiFi chip and USB sound card. It's driven by an xmega (iirc) as well, those are all pretty open. It's obfuscation atm that stops me from completely reimplementing the pairing open source.
Click to expand...
Click to collapse
Steel01 said:
I
KNOWN PROBLEMS:
1. This is a multirom edition of twrp, but there's no multirom support yet.
2. My wireless keyboard / mouse combo (an old Logitech MX something or another) fails to initialize the mouse on boot. I have to unplug and replug the USB receiver for the mouse to work. My wired mouse doesn't do this. I'm curious if anyone else sees a similar problem or if there's something weird with my hardware.
Click to expand...
Click to collapse
I have a logitech K830 keyboard with trackpad and have exactly the same issue as you. I have to unplug and replug the usb receiver before it will work with the recovery.
The recovery itself is working great for me. I can access my external usb hd from the file manager, and I did a TWRP backup to the external usb drive last night :good: Ive sideloaded this app to boot straight into the recovery from the TV.. https://play.google.com/store/apps/details?id=gt.reboot.utility
Short version of question: How can I unbrick my ONEPLUS 3 (A3000) if I cannot boot to Android and OEM Unlock AND USB Debugging both have not been enabled?
Long version: Phone was recently purchased second hand from a third-party market (Kijiji, kind of like craigslist for Canadians). Person I bought it from claimed in the ad that the device was in a bootloop and couldn't access the OS. I had in the past successfully saved a ONEPLUS 1 from bricked status, so I didn't feel a simple bootloop would pose much of an issue. That, and at the price he was selling I really couldn't turn it down.
I tried various different methods of restoring the phone's partitions, OS, and firmware to stock/custom, but had no real luck with any (I will list below what I have attempted). If there was a root cause of this, I believe it's due to the fact that some part of the phone's storage partition (boot or system if I had to guess) had become corrupted at some point. Given the volume of threads I've seen here and elsewhere online, I wouldn't rule out a bad OTA flash, but doesn't really matter. What does matter, however, is that the Android OS is inaccessible despite my best efforts, and the bootloader is set to locked and ADB Debugging remains off.
Generally speaking, is there a way to access Developer Options to correct both these issues through terminal or a tool? I'm confident that I can get my device working again if I could access this menu, but as of yet I have had no luck.
Methods used to restore/info worth mentioning
While I don't doubt their effectiveness at large, for whatever reason I have yet to find a tool/guide that yields the anticipated results upon completion. MSM Download Tool (V3 and V4) have both been downloaded, executed, and completed numerous times, but will still not boot past the loading screen upon completion.
According to Unified Android Toolkit, my device build is being detected as "OnePlus3 7.0 NRD90M" and All-in-One Toolkit is showing that Android 6.0.1 is installed.
Drivers are all installed correctly, as proven both via tools downloaded and through Windows CMD terminal (adb devices, fastboot devices, adb get-state, etc)
Stock recovery and bootloader modes can both be reached through both hardware keys and software commands. I will note that it seems to take longer than I'd expect to boot to either of these modes using hardware keys.
I have utilized multiple USB ports, Type-C cables, different OS' on two laptops (MS Windows 10 and 7, FWUL Linux). I usually have no problem with the device being detected by the system. When I have, it usually involved one pesky USB cord.
common commands used and their effects:
fastboot OEM unlock: fails, cannot be done remotely
fastboot flash x: fails, remote: flashing partitions not allowed
ADB push: fails. cannot access partition
ADB devices: device is seen by system with serial and state
fastboot devices: device is seen by system with serial
ADB sideload: varying results. Some will fail at 0% citing "total xfer: 0.00x", some will reach 47% and fail (always exactly 47% oddly). Generally if the sideload operation passes 47% it will complete.
fastboot format/erase x: fails, partition formatting/erasing not allowed
fastboot continue: executes, but does not help with android bootloop issue as I had hoped
While I searched for an answer online, I did come across an infosec whitepaper regarding ONEPLUS 3 vulnerabilities, though it was over a year old. To my surprise, the command they had been entering works on my device, but I'm not sure how to properly use it effectively. The command used was fastboot OEM boot_mode [rf/wlan/ftm/normal]. Now, I was unable to determine what each of the triggers does, but what I did discover is that with boot_mode set to rf, my device would display chinese/korean lettering in lieu of the usual ONEPLUS logo with "powered by Android" below. This is also how I managed to have my device show up in CMD terminal for ADB commands to be issued. To the best of my knowledge though, there doesn't seem to be much point to it as I couldn't push/pull any files. Does anybody know where I could find more info on this command, as I'd like to know what the other triggers accomplish.
I've just about exhausted every available resource looking for an answer, but im still coming up short. I've gone as far as contacting ONEPLUS directly, but without proof of purchase they can't (more accurately won't) help me. And while it's not a business practice I would personally support, I can understand why they have it implemented. I've contacted a few phone shops in the area, but none have been able to assist me further than I've already gotten in this process.
I apologize again for creating a new thread about this, but I felt my circumstances warranted a new thread due to the bulk of the others having either an unlocked bootloader or TWRP installed, neither of which I do.
So, can anybody offer their help or suggest something I haven't already tried? Or should I be on EBAY looking for motherboards? Thanks in advance.
Calgary84 said:
Short version of question: How can I unbrick my ONEPLUS 3 (A3000) if I cannot boot to Android and OEM Unlock AND USB Debugging both have not been enabled?
Long version: Phone was recently purchased second hand from a third-party market (Kijiji, kind of like craigslist for Canadians). Person I bought it from claimed in the ad that the device was in a bootloop and couldn't access the OS. I had in the past successfully saved a ONEPLUS 1 from bricked status, so I didn't feel a simple bootloop would pose much of an issue. That, and at the price he was selling I really couldn't turn it down.
I tried various different methods of restoring the phone's partitions, OS, and firmware to stock/custom, but had no real luck with any (I will list below what I have attempted). If there was a root cause of this, I believe it's due to the fact that some part of the phone's storage partition (boot or system if I had to guess) had become corrupted at some point. Given the volume of threads I've seen here and elsewhere online, I wouldn't rule out a bad OTA flash, but doesn't really matter. What does matter, however, is that the Android OS is inaccessible despite my best efforts, and the bootloader is set to locked and ADB Debugging remains off.
Generally speaking, is there a way to access Developer Options to correct both these issues through terminal or a tool? I'm confident that I can get my device working again if I could access this menu, but as of yet I have had no luck.
Methods used to restore/info worth mentioning
While I don't doubt their effectiveness at large, for whatever reason I have yet to find a tool/guide that yields the anticipated results upon completion. MSM Download Tool (V3 and V4) have both been downloaded, executed, and completed numerous times, but will still not boot past the loading screen upon completion.
According to Unified Android Toolkit, my device build is being detected as "OnePlus3 7.0 NRD90M" and All-in-One Toolkit is showing that Android 6.0.1 is installed.
Drivers are all installed correctly, as proven both via tools downloaded and through Windows CMD terminal (adb devices, fastboot devices, adb get-state, etc)
Stock recovery and bootloader modes can both be reached through both hardware keys and software commands. I will note that it seems to take longer than I'd expect to boot to either of these modes using hardware keys.
I have utilized multiple USB ports, Type-C cables, different OS' on two laptops (MS Windows 10 and 7, FWUL Linux). I usually have no problem with the device being detected by the system. When I have, it usually involved one pesky USB cord.
common commands used and their effects:
fastboot OEM unlock: fails, cannot be done remotely
fastboot flash x: fails, remote: flashing partitions not allowed
ADB push: fails. cannot access partition
ADB devices: device is seen by system with serial and state
fastboot devices: device is seen by system with serial
ADB sideload: varying results. Some will fail at 0% citing "total xfer: 0.00x", some will reach 47% and fail (always exactly 47% oddly). Generally if the sideload operation passes 47% it will complete.
fastboot format/erase x: fails, partition formatting/erasing not allowed
fastboot continue: executes, but does not help with android bootloop issue as I had hoped
While I searched for an answer online, I did come across an infosec whitepaper regarding ONEPLUS 3 vulnerabilities, though it was over a year old. To my surprise, the command they had been entering works on my device, but I'm not sure how to properly use it effectively. The command used was fastboot OEM boot_mode [rf/wlan/ftm/normal]. Now, I was unable to determine what each of the triggers does, but what I did discover is that with boot_mode set to rf, my device would display chinese/korean lettering in lieu of the usual ONEPLUS logo with "powered by Android" below. This is also how I managed to have my device show up in CMD terminal for ADB commands to be issued. To the best of my knowledge though, there doesn't seem to be much point to it as I couldn't push/pull any files. Does anybody know where I could find more info on this command, as I'd like to know what the other triggers accomplish.
I've just about exhausted every available resource looking for an answer, but im still coming up short. I've gone as far as contacting ONEPLUS directly, but without proof of purchase they can't (more accurately won't) help me. And while it's not a business practice I would personally support, I can understand why they have it implemented. I've contacted a few phone shops in the area, but none have been able to assist me further than I've already gotten in this process.
I apologize again for creating a new thread about this, but I felt my circumstances warranted a new thread due to the bulk of the others having either an unlocked bootloader or TWRP installed, neither of which I do.
So, can anybody offer their help or suggest something I haven't already tried? Or should I be on EBAY looking for motherboards? Thanks in advance.
Click to expand...
Click to collapse
Thanks for the exhaustive description. You seem to have covered every known method. If the MSM Tool also fails, I think that it is a hardware issue and you are better off searching for a new motherboard instead of wasting further time on trouble-shooting.
Best of luck!
tnsmani said:
Thanks for the exhaustive description. You seem to have covered every known method. If the MSM Tool also fails, I think that it is a hardware issue and you are better off searching for a new motherboard instead of wasting further time on trouble-shooting.
Best of luck!
Click to expand...
Click to collapse
I was afraid of that..... is there a way to test a given hardware component?
Have you tried the unbrick tool FULL updated: https://mega.nz/#!NmhhgZyB!CM7Fw8VjECiMIhh4gRXUx24QVCiE599_ZFAPDf08AiM
acetone802000 said:
Have you tried the unbrick tool FULL updated: https://mega.nz/#!NmhhgZyB!CM7Fw8VjECiMIhh4gRXUx24QVCiE599_ZFAPDf08AiM
Click to expand...
Click to collapse
Indeed I have, dozens of times between the full and mini versions. I've even gone as far as running the toolkits featuring MSMDownloadTool v4.0 to see if it achieved different results (it did not). The mini tool would finish doing its thing (turned the text green upon completion),but I would face varying partitions not being flashed correctly. The full version completes and does not have these varying partitions missing, but the device would then be either stuck in a bootloop where it will eventually reboot itself, or would hang indefinitely on the "swirling dots" loading screen. I tried the remedy of deleting cache in recovery, but this did not help.
deleted
***UPDATE*** - As I mentioned in this thread earlier, I noticed a discrepancy between the variant type listed on my actual device and the variant type returned when queried via fastboot. This got me thinking, and to make a long story somewhat shorter, I found that while most stock Oxygen images I attempt to sideload onto the device fail (at precisely 47%, oddly), I was able to sideload two different Hydrogen images without any resistance at all. I'm guessing something to do with the eMMC vs UFS file storage systems and how each OS uses them.
So I got Hydrogen flashed onto my my device. Smooth sailing, right? Afraid not. Despite fastboot's output clearly stating it was a successful transfer, and the stock recovery on the device echoing this, I still cannot get the OS to load. Now i' stuck with the loading screen hanging indefinitely prior to animation occurring, so basically the static ONEPLUS logo. Factory resets and cache wipes have done nothing to help the situation along. Conventional wisdom from the threads here seem to say using the MSMTool is the right answer..... and thus the circle of frustration is complete with me arriving back where I started. Does anybody have another suggestion I can try out? Still can't flash/boot to TWRP, unlock bootloader, or access Android to activate USB Debug/OEM Unlock either btw.
Have you tried flashing just the firmware, i havent flashed in years but i would assume you could sideload the firmware as well?
voodooline said:
Have you tried flashing just the firmware, i havent flashed in years but i would assume you could sideload the firmware as well?
Click to expand...
Click to collapse
Guess who didn't read? And after a year without flashing + a lack of reading skills, you still think you could solve this case? That's a spirit.
===
You better do pm some devs in dev section and point them to this thread and see if they can help, if you are still curious.
My guess is dead emmc, it can be replaced without buying the whole board.
150208 said:
Guess who didn't read? And after a year without flashing + a lack of reading skills, you still think you could solve this case? That's a spirit.
===
You better do pm some devs in dev section and point them to this thread and see if they can help, if you are still curious.
My guess is dead emmc, it can be replaced without buying the whole board.
Click to expand...
Click to collapse
I did read it, its funny always someone who has to be a **** about things. I should have been more specific. He was able to flash h2os. So he could try to flash the firmware for h2os to see if that gets it to boot.
voodooline said:
I did read it, its funny always someone who has to be a **** about things. I should have been more specific. He was able to flash h2os. So he could try to flash the firmware for h2os to see if that gets it to boot.
Click to expand...
Click to collapse
Magnificent, bro.
You're a truly genius.
THIS IS OUTDATED
BOOTMOD - Root your Shield In 1 minute (2015, 2017, & 2019)
Hello Friends~! We now have a working method to achieve ROOT on STOCK Firmware! A script has been made that can boot your shield into the bootloader, erase the old boot, flash the new boot, and install your choice of Magisk apk for you. The...
forum.xda-developers.com
REPLACES THIS IF YOU WANT ANDROID OR USE THIS GUIDE
How To Install Lineage OS and Optionally, Build Lineage From Scratch
Hello Friends! Today I wanted to re-write a guide for installing Lineage OS on the 2019 Pro. This guide will be more to the point and have only the needed tools. The SOURCE for the Lineage zip shared in the download section below. [/SPOILER]...
forum.xda-developers.com
FOR LINEAGE
THIS GUIDE USES LINEAGE OS AS IT'S BASE, BC I HAD NO IDEA WHAT I WAS DOING WHEN I FIRST STARTED. I WENT THROUGH A LOT OF UNNECESSARY STEPS.
PLEASE USE ONE OF THE LINKS ABOVE FOR DOWNLOADING AND ROOTING LINEAGE OR ANDROID.
*Hi Friends!*
Today I want to show you how to root your Nvidia Shield, for development purposes, as well as for repairing a soft-bricked system.
Spoiler: DOWNLOAD SHIELDROOT
https://drive.google.com/file/d/13pnW5eiO70b4JIvmbgqNRMhI5g1YHlzG/view?usp=sharing
Spoiler: THE SETUP
Plug your usb hub into the port next to your hdmi.
Plug a usb-c cable into the other port.
You will need an Nvidia Controller, a USB Hub, Portable Drive.
As well as a mouse and controller or a usb 3.0 keyboard
Spoiler: GETTING TO THE BOOTLOADER
Unplug the power cord from the Shield, then reapply it.
Using your Nvidia Controller or USB 3.0 keyboard, hold A and B until the Bootloader shows.
Select Unlock the bootloader.
Select Factory Data Reset.
Hit Reboot and remove the power cord, then unplug the usb from PC.
Wait a few seconds then add the power cord to the Shield.
Leave the USBC unplugged from your PC.
Hold A and B to post back into the bootloader.
Spoiler: INSTALLING THE USB DRIVER
Open Device Manager on your PC.
Plug the USBC cable into your PC.
Right click on the new fastboot device and hit update driver.
Browse Manually to Shield Drivers.
Then hit, "let me pick from a list".
Select I have a Disk.
Then install the andriod.usb file.
Spoiler: FLASHING THE ROOTED IMAGES
In SHIELDROOT, Run OEMUnlock.
Unplug the USB-C From the PC and Reapply.
(Must do to fix broke fastboot after unlock)
Run ShieldRoot.
This will flash the NVIDIA Developer Rooted images.
This will also flash TWRP for us, to recovery as well as boot.
This purposely bricks the system to run TWRP on boot until we finish
Spoiler: FLASHING THE OS AND OPTIONAL GAPPS
Have Lineage and Gapps saved to a portable drive.
Plug the drive into your usb hub.
Select Install in TWRP and start with Lineage.
Do the same thing for GAPPS If you want to have your playstore. RECOMMENDED.
Unless you know what you're doing...
GAPPS Version is the mini TV build so it runs much smoother.
Spoiler: SIDELOADING THE ROOT
----edit, please Know I believe you don't need to do both steps,
-----i had a problem with the flash on either the apk or the zip
------so i just put them both in.
------ ALSO NOTE THERE ARE A MILLION WAYS TO GAIN ROOT WITHOUT
--------MAGISK, THIS WAS JUST THE EASIEST WAY TO PROVE CONCEPT
Go into Advanced on TWRP.
Select Sideload ADB.
Then run the SideloadRootApp.bat file.
Lastly SideloadRootManger.bat file.
Select Reboot system.
Setup your system how you please.
Spoiler: UNLOCK DEVELOPER OPTIONS
Go into settings.
Device preferences.
About.
Build, hit build 7 times.
Spoiler: SETTING UP ADB
Go into developer options.
Enable USB Debugging, all 4 options including Network debugging.
Take note of your IP address.
Right click AdbConnect.bat and select edit.
Add your IP address there.
Run AdbConnect and select *Allow* on the Shield.
Run AdbConnect again and you will be successfully connected.
You can then get Root Access in ADB by running AdbR00t.bat if you need it.
Otherwise you have full access to push files, read and write over system partitions, etc.
Spoiler: EASIEST WAY TO INSTALL APPS
- YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
www.youtube.com
HOW TO OPEN SHIELD FOLDER ON YOUR PC- BOOT INTO FASTBOOT AND RUN TWRP, WHEN TWRP IS OPEN, YOUR SHIELD WILL POST TO YOUR PC!!! THEN YOU CAN DRAG AND DROP FILES NO CODE!!!
Thank you to the community for always sharing their knowledge.
Love, Jen
Spoiler: REFERENCES <3
Youtube Vids:
FULL PLAYLIST: https://www.youtube.com/playlist?list=PLErzGEIjyUlyiOLVl4aWDYRW-CJd6yF-N
How To Root Andy MANUAL Windows Setup Andyroid 0.45.5.0 LATEST
Safely Backup and Restore FULL ROM using TWRP Recovery (4K)
How to fix "Zip Treble compatibility error!" Invalid zip file format! in TWRP custom recovery
Linux File System/Structure Explained!
Linux System Administration Full Course
Easily Run Linux On Android With AndroNix - Linux Distro on Android without root
New Way to turn you PC into an Android TV Box with FydeOS - Bye Bye Android X86
Nvidia Shield TV Pro 2015 SSD Swap out + Regrease The APU!
Android multi-boot demo
Nvidia Shield Pro unlocked bootload, twrp and more
How to Download & Install GApps and Magisk on LineageOS 18.1 with LOS Recovery
Nvidia shield TV users MUST watch - 10 Hidden features you did not know existed
LineageOS Custom Rom on Shield Android TV (2015)
Nvidia Shield TV Pro (2021)｜Watch Before You Buy
Recovery OS Nvidia Shield TV installation
[HOW-TO] Install Full Android Nougat on Nvidia Shield TV 2015 - TWRP - ROOT [Bye Bye Android TV]
https://www.youtube.com/watch?v=LQaYb4oVHVc&list=PLErzGEIjyUlyiOLVl4aWDYRW-CJd6yF-N&index=16
Nvidia Shield TV Pro 2019 Boot Loop Repair (Recovery Image)
https://www.youtube.com/watch?v=qc4m2Hfd4HY&list=PLErzGEIjyUlyiOLVl4aWDYRW-CJd6yF-N&index=18
HOW TO ROOT NVIDIA SHIELD 16GB ON OREO UPDATE
https://www.youtube.com/watch?v=x893ajy9YVo&list=PLErzGEIjyUlyiOLVl4aWDYRW-CJd6yF-N&index=19
Website Links:
Install Wolf Launcher on Firestick/Android and Remove Ads (2022)
This step-by-step guide will show you how to install the Wolf Launcher on Firestick, Fire TV, or Android TV Box to upgrade your interface. Wolf Launcher
troypoint.com
Download Android Studio & App Tools - Android Developers
Android Studio provides app builders with an integrated development environment (IDE) optimized for Android apps. Download Android Studio today.
developer.android.com
TeamWin - TWRP
This is the Team Win website and the official home of TWRP! Here you will find the list of officially supported devices and instructions for installing TWRP on those devices.
twrp.me
Explorer - Apps on Google Play
Fast, lightweight and easy to use file manager.
play.google.com
SHIELD Developer OS Images
As a service to developers, NVIDIA makes "beta", "rooted" and "early access" versions of certain SHIELD system images available for download. These packages are for software developers only and may provide: root level access by default; non-certified preview graphics drivers; beta system device...
developer.nvidia.com
Download Magisk Manager Latest Version 26.1 For Android 2023
Magisk Manager is an app which helps users to root their phone. With the help of Magisk you can run banking apps and also pass SafetyNet tests.
magiskmanager.com
LineageOS Downloads
download.lineageos.org
The Open GApps Project
OpenGApps.org offers information and pre-built packages of The Open GApps Project. The Open GApps Project is an open-source effort to script the automatic generation of up-to-date Google Apps packages. All Android versions and platforms supported.
opengapps.org
https://www.reddit.com/r/xdacirclej...to_use_a_mouse_and_keyboard_on_stadia_google/
ADB : unable to connect to 192.168.1.10:5555
I cannot use adb connect to connect via WiFi to my device (Nexus 5, Android 6), but since I'm developing a cordova plugin using USB OTG, I really need to connect via WiFi. I tried to adb kill-serve...
stackoverflow.com
https://www.reddit.com/r/AndroidTV/comments/jnxlmw/guidenatively_use_custom_launcher_on_chromecast/
[HOW-TO] [PICTURES] ADB Working On the Google Chromecast
Hey everyone, I got the Android Debugging Bridge (ADB) working on the Google Chromecast. A video is currently uploading. A how-to will follow shortly after. Videos have been uploaded! Thanks! Part 1...
forum.xda-developers.com
How to Root and install Magisk on NSTV 2019 Pro v8.2.0
Can I flash these mdarcy.dtb.img and vbmeta_skip.img from on an updated 8.2.1 SHIELD?
forum.xda-developers.com
How to skip(bypass) Google sign-in NSTV Pro 2019 with any firmware versions!
Let me share my working build.prop file with you. Make sure the permission of this file is proper too. Hey buddy.. I have not had time until now to try this again.. My shield has been semi-bricked since last try and have not been able to use...
forum.xda-developers.com
[GUIDE] 8.2.3 + Magisk root + MagiskHide + TWRP
Based on the work done in https://forum.xda-developers.com/t/how-to-root-and-install-magisk-on-nstv-2019-pro-v8-2-0.4189567/ User friendly guide written for Windows. Bash script for Linux flashing edited as well, but guide is focused on Windows...
forum.xda-developers.com
For anyone who downloaded the toolset early, the 1.5 gb version, my apologies, the full file hadn't downloaded. The correct google drive link is now listed. It is 3 gb in total
I'm still studying everything android, apk, linux, etc. I thought about cracking big name emulators last night, like "Nox, andy. bluestacks" with custom OS full Root, etc, but then it occurred to me what these programs actually are, and it's so simple.
It's just like building androidx86 in a virtual machine, except the programs I mentioned, figured out how to manipulate the machines within the virtual environment, doing their best to shut sudo down, and Sold Out to Corporations, uploading $hitware, on top of their independent, emulated kernels.
So I thought "Why not install a headless (just terminal, no gui at boot version) linux" and then construct the android emulator from scratch?" Well I started researching more based off that train of thought, which emulators work on linux and I learned about the most Special One. https://anbox.io/#collapse2
The logic Is flawless, beautiful, brilliant, but not unique! Thankfully for me, as I am a female that prefers Windows, in a world ran by men that love Linux <3 no Hate. I understand. It is akin to apple vs android, but I digress. I was initially going to install a virtual machine with ubuntu to test out anbox, which I absolutely am going to do, as well as I plan to do everything in my power to get it to work on the shield, muahahhaa, butttttt.....
For Us Windows Users.... THERE IS AN AMAZING NEW DEVELOPMENT WITH WIN 11. I must investigate further, I'm updating my OS now... and hopefully in a few days I can prove my current theory, and share with you guys something Truly Magical in the World of Android, for both Windows and Linux Users. EMULATORS, BEWARE..... MUAHAHAHHAHA. <3 NOOBSTACKS RIP
Thread has been updated with an alternative download site, MEGA. It seems some folks were experiencing an error on Google drive due to the tools being downloaded too quickly.. Never had this happen before, so my apologies. https://mega.nz/file/oypjQChD#wjSfCChkLN6uLQtiEtHrnGbevCsU7pW7KODb9sEqzOQ
Hi jen, sorry i cannot reply on your youtube comment. Not sure the reason. https://www.google.com/amp/s/m.apkp...ating-widget/com.spencerstudios.ramlogger/amp here the link to download the ram monitor and install from usb drive. Will wait for the result.Thank you.
mkhainizam said:
Hi jen, sorry i cannot reply on your youtube comment. Not sure the reason. https://www.google.com/amp/s/m.apkp...ating-widget/com.spencerstudios.ramlogger/amp here the link to download the ram monitor and install from usb drive. Will wait for the result.Thank you.
Click to expand...
Click to collapse
Perfect ty hun I will look at it here shortly, I promise!
mkhainizam said:
Hi jen, sorry i cannot reply on your youtube comment. Not sure the reason. https://www.google.com/amp/s/m.apkp...ating-widget/com.spencerstudios.ramlogger/amp here the link to download the ram monitor and install from usb drive. Will wait for the result.Thank you.
Click to expand...
Click to collapse
Level up your Knowledge from this guide. See How It All Comes Together In Windows 11, Subscribe for more guides, tools, and virtual machine images! https://forum.xda-developers.com/t/root-windows-11-hard-mode.4371611/
Guys we are getting so close! https://renegade-project.org/#/en/edk2/Overview
Does anyone know these folks? If I'm reading correctly they are programming a custom bootloader or a recovery image that currently allows certain cpus to run win 11 arm. Is this akin to an arm translation tool like on genymotion or can Anyone help explain this to me better. I'll reread it several more times and research more. Just dropping bread crumbs for deh pidgeons....
He uses a lot of jargon I'm trying to familiarize myself with https://www.kernel.org/doc/html/latest/arm64/acpi_object_usage.html
*ALSO A KNOWLEDGE BOMB*
anyone else who finds themselves on this Journey... I stepped on my shield and in doing so it bent the usb on for my nvidia controller. It also somehow shorted out the system. Lol. Anywho, In doing so, I tried to replace the usb cable with a crappy one I just had lying around and it did not work. I found a newer usb cable and it triggered the controller, so I theorized that since the ports are USB 3.0 or 3.1, not sure, the bootloader will only post with a usb 3.0+ Device. So in theory, any keyboard or controller usb 3.0 should work by holding a + b down
more knowledge.......
How to enable UEFI and Secure Boot for Windows 11?
The UEFI BIOS Mode and the enabled Secure Boot State are minimum requirements for Windows 11 support. Change the Legacy BIOS Mode to UEFI, convert the partition type to GPT, and turn on the Secure Boot State.
easywebfixes.com
Let's keep diving deeeeeperrrr
I'm starting to understand....
What’s the Difference Between GPT and MBR When Partitioning a Drive?
Set up a new disk on Windows 10 or 8.1 and you’ll be asked whether you want to use MBR (Master Boot Record) or GPT (GUID Partition Table). Today we’re explaining the difference between GPT and MBR and helping you choose the right one for your PC or Mac.
www.howtogeek.com
The Best Thing Ive read in 7 years
[CLOSED]HaHaHack Dis: No Magisk REQUIRED!!!!
Magisk is no more... I present a new fool proof method of flashing su to Android 10_Q and above!! I ranted and ranted about variant=user/user-debug/eng builds that I got no-where... people thinkin am dissin john wu, nah, I respect what I've...
forum.xda-developers.com
I think I'm Really starting to understand, that conversation was sosososo Enlightening
Hello.
Here is where I am at in "thinking outside the box".
So instead of trying to flash windows or ubuntu directly onto the nvidia's system partition, why not flash it to a portable drive?
So I am researching UEFI, Bootloaders, flashing, and volumes, particularly how they store and load data.
So I understand that windows requires it's hard disk to be formated to GPT.
My USB stick is MBR. I have a partioning software that can change the USB to GPT.
If anyone understands what I am talking about, can you reach out? I know this is possible, I know the answer is out there,
IT IS JUST ALL THIS JARGON SOME OF YALL USE <3 GOD LOVE YOU ITS HARD TO UNDERSTAND
AND WHAT IM TALKING ABOUT IS DUAL BOOT FOLKS!!! LEGIT DUAL BOOT, NO SECOND PC REQUIRED
AN OS FOR FUN , AND AN OS FOR WORK.....
CAN YOU IMAGINE
KNOWLEDGE BOMBS
ShieldTV/AddPartition.md at master · na6an/ShieldTV
Projects on Nvidia's Shield TV. Contribute to na6an/ShieldTV development by creating an account on GitHub.
github.com
""Nvidia uses its own proprietary disk structure on its devices, which look like a modification of GUID partition table(GPT) with protective MBR. Most disk partitioning softwares are unable to read Shield TV's partitions because its primary header is overwritten with non-standard GPT format.
Here are list of disk paritioning software I tried and couldn't even read the disk at all: fdisk, GParted, KDE Partition manager, diskpart and Disk Management on windows. Of course, you may format the disk and rebuild partitions, but then it won't boot from Shield TV at all.
There are two softwares can read partially:
GNOME Disks - the default partition software for Ubuntu, however, could read the partitions IF you boot L4T from Shield TV. It won't work if you try from another computer. Also, it is still unable to modify partitions.
gdisk (GPT fdisk) - gdisk can read partition 2~33 from backup header. As you can see, 33rd partition is the one that holds most of 500GB storage. (462.5 GiB out of 465.66 GiB)""""
END QUOTE FROM ARTICLE
A gdisk Walkthrough
What we need to do is GET A NEW BOOTLOADER! Idk how but I will find out! If you know how reach out pl0x
I'm just going to keep dumping knowledge bombs until I or someone elsse figures this out!
How A/B Partitions and Seamless Updates Affect Custom Development on XDA
You may have heard of Seamless Updates before. It involves something called "A/B partitions." What is it and how does it affect custom development on XDA?
www.xda-developers.com
system – holds the Android OS, system libraries, system apps, and other system media like bootanimations, stock wallpapers, ringtones, etc.
boot – holds the kernel, ramdisk, and on A/B devices also the recovery as well
recovery – holds the recovery, where TWRP is most commonly flashed on A-only devices (A/B devices don’t have a dedicated recovery partition)
userdata – holds all of your app, system, and internal storage data
vendor – holds platform and device-specific HALs, the files necessary for the Android OS to communicate with the underlying hardware
vbmeta – the partition for Android Verified Boot 2.0 which verifies the integrity of the boot process
gdisk(8) - Linux man page
The gdisk program employs a user interface similar to that of Linux's fdisk, but gdisk modifies GPT partitions. It also has the capability of transforming ...
linux.die.net
Going to play with this toy:
GPT fdisk
Download GPT fdisk for free. GPT fdisk is a disk partitioning tool loosely modeled on Linux fdisk, but used for modifying GUID Partition Table (GPT) disks. The related FixParts utility fixes some common problems on Master Boot Record (MBR) disks.
sourceforge.net
Cause GDISK is for LINUX and I don't like using Linux. No hate but GUI will win over MBR, Mah nerds. Cause GUI IS CMD!! GUI Is Just Easier For Some People! Different Strokes, for Different Folks!
"Upon start, gdisk attempts to identify the partition type in use on the disk. If it finds valid GPT data, gdisk will use it. "
"gdisk" or whatever bootloader you are playing with...
So my only question is how do I make the WIN 11 Arm version bootable... ?? On the USB ?
WAITING ON MY USB DRIVE TO WIPE UGH. '
GNU GRUB - GNU Project - Free Software Foundation (FSF)
Site for GNU GRUB
www.gnu.org
Android Verified Boot 2.0
Hi friends I don't sell anything I only teach but I wanted to share with you guys that don't already own a shield or want to purchase one for a gift that they are on sale at Newegg
https://www.reddit.com/r/buildapcsales/comments/rfdi26
Thanks for your work, very well explained guide. I only have one question, if i root my device, could lose some function like dolby vision/atmos?
locust10000 said:
Thanks for your work, very well explained guide. I only have one question, if i root my device, could lose some function like dolby vision/atmos?
Click to expand...
Click to collapse
All the apps that originally worked, will still work. However, since this process involves flashing a new operating system, lineage, as opposed to the base, stock, operating system, android, you may have to reinstall your favorite apps like dolby
---There are many ways to flash your favorite apps, perhaps the easiest being a program called "send files to tv" you can install that on your phone and tv, then DL the app you want to send to the tv, like dolby, and within SFTTV, You can easily send the app.
You can also use my tools in the shieldrooot but SFTTV is a lot simpler for beginners
Hello,
I am trying to figure out how to either inject a custom bootloader like Clover onto my Nvidia Shield, or to Modify the existing EFI bootloader itself or with a modification to a Recovery program such as TWRP in order to be able to use a custom bootloader to select "Boot From Usb"
I figure I oughta make a backup, but I do not know how to backup my bootloader either....
I think I understand how to look at the shield's partitions now to find the one with the bootloader, I'm just nervous to proceed...
I have been researching for a week and have learned amazing tidbits of knowledge on the sublayers of the shield, and a lot of its partitions...
I was able to install a custom OS, modified GAPPS, and root on my shield, I am just hung up on this final part....
If anyone who understands this would care to share even a bread crumb where to start, I Would Be Ever So Grateful
Download Clover EFI Bootloader - MajorGeeks
Clover EFI Bootloader can boot OS X, Windows, and Linux on Mac or PC with UEFI or BIOS firmware.
www.majorgeeks.com
Hi @jenneh I know you're in the middle of a different train of thought, but since you are one of the most active members recently, I was hoping I could reach out for your help on two really important issues I'm having. I don't think that anyone has been able to get AI Upscaling to function after rooting, and it's one of my favorite features of the device. If you ever have time and are in the mood to crack this nut, I'd be both incredibly grateful and also willing to send like $30 your way.
On that note, I am also having a hell of a time trying to get the AdGuard CA certificate installed. I have tried every method I could find, but none of them seem to be compatible methods for this device. I will both send you an AdGuard lifetime license, and another $30 for this bounty. Any help at all would be greatly appreciated! (Oh, and if you're interested in attempting these feats, please DM me. I'll reply with the AdGuard license in advance.)
One final important note: My device is running the new 9.0.0 update.
Even the new update 9.0.0 AI Upscaling not working after rooting...NSTV 2019 Pro
I tested but same problem Demo mode work only Enhanced Mode
Here's where I'm at now! I am in the Kernel! Not through ADB But instead On the shield Using Root Explorer to learn all of the shield's directories to find out where the hell the EFI drivers are to inject my new bootloader. I see many options pertaining to the upscaling that I can modify but I haven't got the slightest, what it is yall are trying to do. If someone can explain it better we can totally solve this.
----i'm a little weirdo and i have been dreaming about this,, or rather, dreaming in Operating Systems for Months Now~
ODM Partitions | Android Open Source Project
source.android.com
A NEW WAY TO PUSH APP~z!1!
HOW TO OPEN SHIELD FOLDER ON YOUR PC- BOOT INTO FASTBOOT AND RUN TWRP, WHEN TWRP IS OPEN, YOUR SHIELD WILL POST TO YOUR PC!!! THEN YOU CAN DRAG AND DROP FILES NO CODE!!!
---WHERE I'M AT TODAY!
Learning about BUSYBOX~!
Come along for the ride!
"
"boot.img contains the kernel and ramdisk, critical files necessary to load the device before the filesystem can be mounted. You have to generate the boot.img yourself using mkbootimg, a tool provided by AOSP. "
What is boot.img file in android?
I am building the android source code and getting new system.img . I try to flash the new system.img on a device and I see that I need another file called boot.img. What is this file ? what is used...
stackoverflow.com
To Do List:
Will be reuploading the shieldroot tools with wipe all partitions code, updated lineage, etc, as well as including options for folks on other versions of the nvidia shield, all with ammended code. This will take some time to upload / craft, but I will let y'all know when it's done.
Please note, there is nothing wrong with the current shield tools, I am just making them Better! Peace and love
This set me off track for about an hour, if anyone has any ideas https://forum.xda-developers.com/t/a-strange-fastboot-problem.4380579/
I recently bought Asus Zenfone, because here in Ukraine is war, so I want small device with Windows (electricity often is off here because rockets fall on our electrric infrastructure etc).
So I've bought Asus Zenfone 2 used (it costed 16,25$). It came without accumulator, and 1/3 screen working. So I went to radio-market to buy new battery, it costed + ~10.25$ + 2,5$ to install battery. Then I've bought new touchscreen for it for ~22,5$, plus payed ~6,25$ to install it. Then around 7,5$ to restore battery connectors (on device and accumulator). So finally it worked, and wanted to see how to install Windows on Zenfone. Sure, if I had possibility to buy anywhere Zenfone better, new, not used, - I'ld do it, but it is not that easily available, just like any other Intel smartphone.
So, I started reading - how to make my device rooted. I don't understand how to get root. I found on wikipedia, that rooting is different from unlocking bootloader, and realized - yes. I need to unlock bootloader, and to boot from external flash-disk and install windows, or at least - new kernel with KVM support. I used pn my Android (non intel) Limbo x86 emulator, it can run some old windows 98 etc, maybe even xp, never win 2000, and if it runs win-7 or win-8 - it is so terribly slow. So I decided to buy Asus Zenfone. As in KVM mode I can send commands to CPU directly, and hope this Windows works much faster than in emulator. I hope just at least to run Windows XP on it, I need to code some C# code, so that Andorid phone is not only for mp3-playing, internet on the go and make calls, but to learn, study and to work. I don't know why Microsot, Intel and other companies don't like Intel CPUs in mobiles. They could do it if they wanted. I like WIndows because most programs are for Windows. And I want desktop x86 windows also on every mobile, intead of all Androids.
Anyway, What I tried to with my Zenfone. I found one amazing experience - that our hero and inspirer (ley God blesses him, maybe he will work in Intel/AMD/Asus/Microsoft etc to make more newer KVM kernels for future x86 phones with windows) - so Ycavan made KVM for Asus Zenfone 2. Great, I've read his thread - https://forum.xda-developers.com/t/...0-with-kvm-bridge-compiled-need-help.3145055/ - completely, with pen and paper writing down important information, downloaded all the files, and decided to start flashing.
I copied them to root of my Zenfone, unpacked tars and converted them into ZIPs. I also unpacked .img files to root of phone (I mean its folder which is visible if I connect it thorught USB, I know it is not "/" root of file system of Andoird, but anyway it is visible even inside CWM... sorry, was visible)...
So, I made some mistakes. I downloaded the kernel, tried to flash it using commands like :
fastboot flash boot boot_fhd_2.19_kvm_bridge_20150710.img
fastboot flash boot boot_fhd_2.19_kvm_bridge_20150714.img
fastboot flash boot boot_fhd_2.19_kvm_bridge_20150717.img
fastboot flash boot boot_fhd_2.20_kvm_bridge_20150820.img
fastboot flash boot boot_2.19_kvm_bridge.img
fastboot flash boot boot_fhd_2.20_kvm_bridge_20150820.img
but non of them produced bootable Zenfone. So I had to revert to previous bootloader using the CWM tool.
In fact I liked this CWM most. I found this thread - https://forum.xda-developers.com/t/...root-ze500-ze550-ze551-temporary-cwm.3114063/
or similar here on forum, and it worked amazingly. I attached Zen-phone to USB, turned it off, then on while pressing, keeping pressed volume-up key, and after Asus logo appeared and some "zzz" vibration, again it blinked and I saw bootloader with Android robot, and possibility to scroll through menu using volume up-down, to choose normal boot, or reboot/power off, or to run restore etc.
For some reason, Restore there not worked. So anyway, I understood that I can use tool like ADB (Android debug bridge) and fastboot to copy new firmwares/kernels/bootloaders etc to it, so I guessed I can do it myself, and was ready for risks... And this what bad can happen - it happened.
So, I runned in CWM - file cai_dat_CWM.bat - which asked to type ACCEPT and then T4, and phone started to go into amazing mode, some "clouds" started appearing on phone, and it loaded into special secret menu, from which I could select what to do next. To me it looked like default boot manager which I wanted to see like in Dos/Windows machines - so I can choose to run into safe mode windows, or set some settings before booting, or even use "reanimator dvd" etc to load Windows and other tools to do partitioning, passwrods recovery etc. So it looked like on desktops, and very nice. I went inside the menu, and found good option to make backup. I did it all. Then in same CWM tool (I think it is called SuperSU for Android), I finally choose to restore bootloader/kernel/boot (custom recovery), and this saved my from bricking the first time after I followed the manual from Ycavan. Well, I know I can read a lot more threads how to do this and that, but there is always risk that something wrong can happen. So I tried to read as much as I could, and follow manuals as precisely as I could understand. But my phone is kind of "bricked".
Now it shows some scfreen like TV which can't catch any tv program. So it is some random colors - see attached picture. It is good that it shows at least this. But in worse situation - it doesn't show anything. So let me tell how I achieved this, and if you can tell me how to avoid this mistake and to recover it. I hope to get help from anyone here who installed KVM kernel(s) and acheieved running Windows on their zenfone 2 (or maybe anyone who has XPerience with other x86 phones may help, or if it is general issue how to unbrick - then also non x86 users please help).
So, CWM made backup, I became more non-scared to make more experiments with firmware. But main problem is that I don't know which firmware to use. I ideally suggested that when I change kernel to KVM-supported from Ycavan - that it will work with my Andorid 5.0 (it was installed when I bought it). So, but unfortunately, after installing any of KVM kernels of Ycavan - I was unable to understand which OS to install, which version. So even I tried to try to flash whole 1GB+ image (I have downloaded UL-Z00A-WW-2.20.40.59-user.zip from official asus.com - https://www.asus.com/ua-ua/supportonly/asus zenfone 2 (ze551ml)/helpdesk_bios/ - but. I was unable to upload it to zenfone (flash it), as it said it is older than installed version.
Anyway, now it doesn't matter as I cannot run into ANdroid at all. Worse - I cannot even get Bootloader working in Android, as I see after turning phone on - only "white screen" with non-working TV-like image (see attached picture of my Zenfone 2).
So, to make this happen, I did this: I found some information about TWRP. I tried to install as recovery tool. Even though it was flashed into mobile, and I installed it from apk from Google-Play, still, I was unable to run it... So then I found even cooler tool - which was too risky to install. I was good, but Andorid stopped running at all.
This tool is called - preroot601. I runned in it preroot.bat, and then it did something similar to CWM, but several times it restartd the phone _ i have added screenshots of how it looked like on PC / Windows. So after several restarts, it did a lot of changes - Android didn't start after it. Phone always was able to start into recovery mode - into TWRP (I downloaded its .img and flased it as recovery for phone). But in TWRP I think I did something wrong. I made backup of all files (syste,, bootloader, everything). I saw it is cool - to see there terminal, ability so set attributes for files, mount partitions ... even USB -hey, can I run from flash-disk? or from external DVD/Bluray which I have in this mode? I have USB-hub, and can connect to it keyboard, mouse, flash-usb, ssd/hdd - all through Microusb-usb adapter and to usb-hub. So what I wanted to do is to try to see flash-disk, mount it on my android zenfone. And then after restart - I had black screen or this 'non-working analog-TV screen when no program/channel/wave is caught for signal"...
So, I don't even understand what I did, and why this all happened, and why I have to do to restore bootloader at least.
My aim is to have KVM enabled in the kernel. I don't mind if it is old Windows like XP working on this Zenfone, but I like windows to be my main OS on every phone which I may use in future (and hope they all be x86-64 and not ARM). So as I don't have Steamdect now (it has also AMD x86 CPU, like Zenfone), I want to do this, achieve it - having Windows on mobile - Zenfone.
I can carry it in pocket everywhere, so why not people like having desktop Windows x86-64 in each and every mobile? Even Lenovo are collaborating with IBM - then why not make also IBM-Mobile / IBM-smartphone, which will also be as good as PC - to unassemble it, change any part like on desktop, why not do it? I think everyone will enjoy it, and it will boost everything to better hights, levels.
So, please. If anyone here has similar experience of going to same screen like I have (see screenshot), or like that - black screen - indeed my device also may not even show any thing - even no ASUS logo, no bootloader (even if I press Volume-UP after powering and after flash it usually showed bootloader with robot - no... not now)...
So I don't see anything on screen of Android Zenfone now. no text, no bootloader, no recovery even - no TWRP menu. I think I am ready to format whole zenfone, and install there maybe some partition manager (like you know there is Partition magic on PCs, when I can split HDD/SSD nto two parts, one for Windows, and say other for Unix - Ubuntu or Android x 86 - all on same physical drive)... So I want some re-partitioning for intern SD memory, and be able to install there some ISOs, say with DOS, Win3.11, win 95, 98, 2000, xp, 7, 8,1 and maybe even 10. But guess last will be slow. I think Windows XP would be ideal OS for my Zenfone, if it can run fast. Win 7/8 maybe will be slow. But for some sceintific aims - like I just write some algorythm in Visual studio, and can do it even in WinXP, so why don't do it on my Zenfone? I don't like many Andorids, as they are not for work much - they are used by many people to play games, watch videos on phones, surf social networks, but not for real work. Real work is usually on WIndows, and no laptop can replace "Windows x86 in pocket" (on mobile). And I wonder why Microsoft develops "Windows for ARM" instead of investing millions into efforts like which Ycavan did - to make Windows run in KVM mode fast on x86 smartphones.
Ok, So, any ideas? What should I do now? I need some special tool to fix my phone first. Fix its loader. I think I need to bypass fastboot.exe restriction, which shows "waiting for device". Command in cmd like this: ADB.exe devices -L --- shows device from time to time - it shows:
c:\adb>adb devices -l
List of devices attached
0123456789ABCDEF device
c:\adb>fastboot flash boot boot_2.19_kvm_bridge.img
< waiting for device >
So, I cannot even flash some recovery device in this way. In devices manager I see "ADB interface" in "USB devices" category in devices treeview. And sometimes Moorefield appears, but with exclaimation mark - I have no idea how to make it disappear. I found here some info that I can install tool - xFSTK_Downloader_v1.7.0.zip - I downloaded it, installe,d but it doesn't run (I have win10 x64bit). hm... And driver required - iSOC_USB_Driver_Setup_v1.2.0.zip - I installed - but nothing.
So, what to do? How to make bootloader appear again? And how to write there prob=per bootloader with KVM kernel, and which firmware to flash so I can use KVM fast there with fast Windows...? Is it possible at all to make it run WIndows natively on Zenfone? or it will always be only in virtual machine inside some ArchLinux or in Limbo x86 on Android?
I read that Ycavan used this ArchLinux, but I don't understand why. Is he installing it over Android? Then also which version he uses? I need to know each and every version whcih he uses to make everything works. I 'ld require all the firmwares which he uses to make it work also - to make some Windows iso run on my Zenfone 2.
Did anyone achieved this successfully, except for Ycavan - to run Windows on Zenfone? Or except for him noone was able to install KVM kernel, and it was similar to mine situation? And maybe this is the reason why manufacturers of phons don't like x86 phones? I don't know. Any ideas?
See screenshots. What to do in this state?
IF anyone can please upload to somewhere whole pack of files ("WIndows on Zenfone starter kit") to make anyone able to just follow instaructions which will work in all cases to install WIndows there like Ycavan has - it would be great. There is lack of more detailed information - which .img files, .zips, firmwares etc, which OSes are supported by Ycavan's KVM kernels?
I have no idea. if anyone passed this path, and achieved Windows on Zenfone, please share your experiences, Ireally need it. Here in Ukraine when electricity disappears almost daily, we need devices like x86 phones almost for everyone. And mo matter if Windows is a bit old. KVM mode I guess must be much faster, almost native speed, so (like on tablet PCs), so please help...
Thank you all in advance, whoever will answer me.
indubhushan said:
c:\adb>adb devices -l
List of devices attached
0123456789ABCDEF device
c:\adb>fastboot flash boot boot_2.19_kvm_bridge.img
< waiting for device >
Click to expand...
Click to collapse
wrong mode. adb is only working in
- normal/boot mode
- recovery mode
fastboot is only working in
- bootloader mode
- fastboot mode
You can see 0123456789ABCDEF device in adb devices, therefore you are either in TWRP or in Android (Win?)
type adb shell and check the prompt is either $ (shell) or # (root shell)
in root shell you can flash partitions from cmd line. you can also reboot into bootloader/fastboot mode from cmd line.
Code:
adb reboot bootloader
I had success in restoring my bootloader (logo with android robot) - I intalled xFSTK, so somehow I had success to make it run, and I added threee files (1, 2, and 4th) and tried to flash it. Phone was visible as Moorefield. Then I tried to use Asus flash tool to flash big RAW image, but for some reason I don't know why - I had even whole day left it to flash, it didn't do the task - Android stopped booting - no logo showing at all - have to use xFSTK to recover. Maybe I use wrong RAW image (from official site it is .zip, so have no idea where to get those raw files).
When try to flash using flashboot - I get error: - flash cmd error.
As for devices list. My device rarely appear there. It may appear for some seconds, and then xfstk can have success to flash it, and maybe even make it runnable into Android robot scren (bootloader).
I am thinking that I need to install maybe ArchLinux, which Ycavan is using, but have no idea where to get RAW file for it, and how to flash it. Maybe some problem with my USB port on old laptop, or maybe even with USB cable (though have few good almost new cables, even new 4Amperes one). So maybe even problem in port of Zenfone itself (to change it). No idea. Because even when I tried to flash it (that huge 1GB file), phone disconnected, or showed "ready for commands", instead of showing process of ownloading RAW image/Android into phone's memory.
Flashboot/adb almost unusable. Well, I'll try, maybe it'll work.
My hope is try to go into CWM, run from it into "secret menu" on phone, and from it - to access internal memory of phone, and restore phone from backup. But when I tried to load into it once - it hanged on "clouds". I don't know...
And I don't think I'm ready now to format internal memory of phone or to repartition. At least I don't have backup on some external card (sd-card) etc.
as for adb. maybe it can't see my device, even if it is "recovery mode" (when see in devices manager in Windows - Moorefield). Now I'm stuck on xFSTK and can't go anywhere further like adding TWRP into phone, or foing into backup/restore menu on phone, and of course there is no Android. Even when I see Android robot (boot menu) - I feel happy, that at least phone shows anything, so at least bootloader workds. Maybe difference is in drivers - when I have Moorefield driver, then maybe it contradicts with Zenfone driver, and I have to reinstall them? Or use other OS? I have dual-boot (two Windowses on my laptop), so maybe I need to use one Windows - to work with Moorefield (xfstk) - when phone is in "worst" situation when no logo shows / no bootloader. And the other Windows I have to run on laptop - with Zenfone driver installed (I think it shows something like Asus device in device manager). But they seem to use contradicting drivers, I am not sure. And maybe it's some problem with my usb ports, but hope no. They seem to be ok... Maybe I'll have to go some day to give phone for diagnostics to repairing center again ;-(