Related
Pictures are ordered chronologically
This is the 3600 mAh Mugen Power extended battery for the SE Xperia X1
Battery Test Coming Soon
Part 0 – Shipment and Delivery
The package came in bubble wrap envelope.
Pre-ordered it before May 1 release date, and the battery dispatched May 1.
No tracking number provided. Received it May 11, 2009.
The shipping distance is from the Netherlands to the California of the US of A.
Signature confirmation required, so you don’t call the company and lie to them that you didn’t fraudulently ask them to send you a replacement. I was seriously considering about doing this because they didn’t tell me about signature confirmation, and they didn’t give me delivery confirmation.
BTW, I have complained to eBay sellers before that I haven’t received item, and I received second helpings.
Part 1 - X1 3MP Captures
01 – Front Packaging
For 100 dollars + free shipping you get the worst packaging ever from such a “well respected” 3rd party battery maker. At least they awkwardly put some foam/padding inside the package.
02 – Back Packaging
The back packaging is also nothing special, but it’s so cheap. But the good (or maybe bad) part is that they didn’t fuse the back and front seams together like most companies do for these types of packages. This makes it so easy to open the package without damaging. There isn’t even tape to seal it up. Just open it up like a bag of chips.
03 – Model Number
Model NO. HLI-BST41XL
04 – Major Disappointment
Please read the text in this picture. It’s very important if you own this battery. Anyways, I don’t know who to be mad at… should I be mad at Sony/HTC or should I be mad at Mugen? Seriously…is this inevitable? Can anyone tell me?
05 – Easy to Open
See, you can open this with no hassle, unlike other packaging. There will be no damages to the package, and scissors are not required unless you are a kindergartner, a noob, or a drunk.
06 – Unimportant Picture
No comments
07 – Suggestions
No comments
08 - Warnings
No comments
09 - Terrible Warranty Sticker
The warranty message is apparently a sticker with misaligned text. Mugen doesn’t really care about packaging; I tell you that.
10 - Front of Reflective Plastic Cover and Battery
There is a transparent cover/sticker on the front of the battery cover. I took the sticky cover off and the plastic cover is like a mirror but it’s plastic! The typo is still on the battery; it looks exactly like the commercial stock image with the same typo. Way to go Mugen, you’re almost like a Chinese replica phone manufacturer.
11 - Back of Reflective Plastic Cover and Battery.
The plastic feels cheap and looks cheap, especially the interior.
12 - Battery Still Has Typo
I have already covered this dissapointment in a previous photo.
13 - Do Not Do This to Battery
No comments
Part 2 - Canon 7MP Captures
14 - Good Quality Picture of Battery
Look at the bottom, you see that long slit? Guess what it is…it’s electrical tape (I think, correct me if I am wrong). It reminds me of those cheap generic batteries.
15 - Electrical Tape on the Bottom
This is how the tape looks at the bottom of the battery. It looks like it’s going to peel off on its own. Can someone explain to me why this is necessary? Should I peel it off?
16 - Electrical Tape on the Top
This is how the tape looks at the top of the battery. No other comment, but please answer my question from photo 15.
17 - Phone Starting Up With New Battery
No comments
18 - Nice Reflection A
If you don’t have a mirror screen protector installed on your phone, you can install this extended battery cover to use as a mirror alternative.
19 - Nice Reflection B
No comments
20 - Shiny Corner
No comments
21 - Battery Cover Sucks
The battery cover does not fit perfectly.
22 - Battery Cover Off
No comments
23 - Just Learned That The Chrome Finish of My Phone Is Plastic and Peels Off
Off topic but while I took these pictures, I encountered another disappointment. This time I am disappointed with the Sony Ericsson’s build quality. I always thought that the chrome finish of the Xperia X1 was metal. It’s actually plastic and I just peeled a chunk of it off. Prior to this I thought that the raised bump that used to be there was a minor product defect. I thought that because metal was malleable, maybe it had to bend up a bit. But I am wrong, the chrome is made of cheap plastic. However, the Sony Xperia still has the best build quality compared to most phones that I have ever touched.
24 - So That You Can See
If you can’t see it, here is the square box that will help you locate the damage.
Also, I do not have an image prior to the peeling off of the chrome. And I lost the little piece that broke off.
Part 3 - X1 3MP Captures
25 - Pointless Mugen Screenshot
Why do they even have this picture? Are we so stupid that we don’t know what full charge is? Or are stupid to think that most people are this stupid? Or are they smart that they know most of us are stupid?
26 – Operating Instructions
No comments
27 - Operating Instructions Zoomed Out
No comments
So How Much Thicker Is The Battery?
Take the OEM battery cover off of the X1
Try this at home, take the OEM battery out of your X1.
Put the OEM battery cover back on the X1
Put the OEM battery on top of the battery cover.
This is exactly how thick the Mugen battery is on your X1.
How Does It Affect Pocket Space?
My phone has become as thick as my wallet, but I am easy going guy when it comes to pocket space. Besides, I hang my keys on my pants with a bolt snap.
Here is my configuration:
1) phone always to the left of myself [left pocket]
2) wallet always to the right of myself [right pocket]
3) keys hanging on waistline to they can jangle and annoy people while I am walking
4) garage door opener always held on my left hand
How Does It Affect My Small Hands?
Weight:
Not too noticeable…
Keyboard Typing:
Typing has become much easier. Well at first, I thought it ruined my typing Xperience, but that’s because I got used to typing on a thin keyboard. Anyways I learned that it took 5 minutes of practice to get used to a thick keyboard and it took me like 5 days of practice to get used to a thin keyboard. This could also be because my prior Xperience with the X1 keyboard has gotten me so pro at typing that I can adapt to any modifications even faster. Whatever, your opinion on this is based on yourself. I think it is because I like something to “handle” while I am typing. Typing on the previously thin keyboard is like typing on paper. Seriously.
Portrait Handling:
I have small hands for a male but I am telling you, wow holding this thicker device is satisfying! I feel like I have a grip and if someone tackled me, I would still be holding on to the phone.
I didn’t feel comfortable using my stylus on the thick device though. Do you know why I don’t favor the grip this time? It is the relatively. Suddenly the stylus loss weight, and I can’t balance myself with the phone.
Landscape Handling:
I’ve already explained typing on the keyboard. But in regards to holding, I felt more comfortable in portrait mode, and holding it to watch YouTube isn’t as fun, but holding it to type is better.
The Cool Thing About The Extended Battery?
Wow, this is a bonus. The battery is shaped in a way that the phone can stand up in landscape mode! It can stand up while the keyboard is out and while the keyboard is in!
Works best on a flat surface.
More Pictures:
Aesthetics:
Aside from the noticeable imperfect fit, the cover looks very nice but it doesn’t beat the OEM cover.
The mirror capabilities of the cover is great.
Quality:
Battery cover feels cheap.
Packaging is one of the worst of all time for something that should cost 100 dollars.
Bad typo, low quality instructions, low quality packaging, and misaligned text.
Battery cover doesn’t fit perfectly; meaning there are noticeable gaps, but it still attached to the device 100%.
The charge quality is overkill, everything I do lasts 3 times longer...tired of running out battery after watching 2-3 movies? Now you can watch 6-9 movies!
Pros:
You can use the battery cover as a mirror to look at your face and under a chicks skirt…etc.
Battery cover easy to remove, unlike the OEM cover
It doesn’t feel like falling off but you notice gaps between device and attached battery cover
Extended battery cover can be used like a kick stand, landscape cradle
Improves my keyboard typing and makes it more comfortable
Feels comfortable while talking on the phone
Cons:
Mirror smudges
Battery cover too easy to remove, unlike the OEM cover
Sony Errison typo
Imperfect Fit [but it still attaches completely]
Incompatible device drivers or hardware for battery = inaccurate capacity measurement
Extra weight, extra bulk
Too expensive for build and packaging quality
The Xperia can not recognize the actual amount of remaining battery.
Verdict [w/o Duration Test]:
I don’t suggest you buy this battery. But since my phone can now stand on landscape mode, I will keep the battery.
Verdict [w/ Duration Test]:
The battery lasts really really long, actually it plays mp3 for more than 8 hours non-stop...imagine how long it will last in standby mode... I suggest you buy this if you don't care about any of the cons, but a major flaw is that it is impossible to determine how much charge you have left in your battery.
This is a very nice review. I am still reading. Thank you for spending time for doing this.
Cheers
So far, the battery doesn't last any longer than the normal 1500 mAh. A big let down. The packaging did say that I need to charge and disrcharge 5 times to reach full capacity. I will do that and see if it this extends battery life.
Using the 3600 so far drains as fast as the OEM.
Also, the four illuminations lights instructions doesn't seem accurate. For some reason when I charge my phone with the battery, 3 of the lights flash at the same time and than one loner light flashes after it. This is the sequence of light illumination that I see. But this loner light is always the upper left light located near the start menu.
UPDATES will be included in the first 3 postings, soon.
poetryrocksalot said:
So far, the battery doesn't last any longer than the normal 1500 mAh. A big let down. The packaging did say that I need to charge and disrcharge 5 times to reach full capacity. I will do that and see if it this extends battery life.
Using the 3600 so far drains as fast as the OEM.
Click to expand...
Click to collapse
maybe that's the driver thing... did you try to let it discharge to 0% and see if the phone continues to operate?
anyways... to thick for my taste, the back cover is horrible (looks a bit better with the silver phone... but with the black one...) and holy ****, how could they release this with the "Erisson" XD
cursor said:
maybe that's the driver thing... did you try to let it discharge to 0% and see if the phone continues to operate?
anyways... to thick for my taste, the back cover is horrible (looks a bit better with the silver phone... but with the black one...) and holy ****, how could they release this with the "Erisson" XD
Click to expand...
Click to collapse
The battery came pre-charged at 50%. I charged it to max, and now I am using it until it reaches 0. The cover looks quite nice on my silver Xperia.
BTW, black Xperia sucks...the black oem battery cover peels off "paint" I think. This problem doesn't exist for the silver oem battery cover. I assuming that the black Xperia's are basically coated with fine black paint.
People should have gotten the silver one.
Also what I meant by "the battery doesn't last any longer" I mean the battery drains just as fast. The amount of time it took me to drain the battery by 30% feels the same on both batteries. So if it takes 5 hours to drain 30% on the small battery, it also takes 5 hours to drain 30% on the extended battery. I haven't ran out of battery on the extended battery yet. I am sorry for the confusion.
UPDATES will be included in the first 3 postings, soon.
i disagree with the black xperia sucking
imo it looks much better tho the paint does come off but untill it gets very bad , it looks miles better than the silver
Very nice review and pictures, thank you.
I too have just received the extended battery... the fit is perfect in my case... if fit does not relate to size that is
It is a bulky unit, and the verdict is still out on the usability factor vs. the extra size, weight and different case that you'd need to use with it [I am not a pocket phone guy).
I had previously loaded the 1% battery increment hack; I wonder if the updated dll may track the capacity better than the stock rom's or not... it is too early to see.
Will post back after a few days usage experience.
SO you were saying that the xperia housing wasnt cheap at all an already it peel off...jajaj
Sorry i couldt resist it...
I have the same issue...
So happy not been the only one...
vagelis said:
Very nice review and pictures, thank you.
I too have just received the extended battery... the fit is perfect in my case... if fit does not relate to size that is
It is a bulky unit, and the verdict is still out on the usability factor vs. the extra size, weight and different case that you'd need to use with it [I am not a pocket phone guy).
I had previously loaded the 1% battery increment hack; I wonder if the updated dll may track the capacity better than the stock rom's or not... it is too early to see.
Will post back after a few days usage experience.
Click to expand...
Click to collapse
I haven't installed the 1% battery, I usually wait 1-3 months for bugs to clear up before I start installing something new.
I agree with the "size" doesn't matter.
One question though, what do you mean it fits perfectly? Does your battery have a gap between battery cover and the device? If you look at picture 21, There is a noticeable gap between the new cover and the device. It still holds on to the phone but dust and moisture can get into the battery more easily
Fulgore69 said:
SO you were saying that the xperia housing wasnt cheap at all an already it peel off...jajaj
Sorry i couldt resist it...
I have the same issue...
So happy not been the only one...
Click to expand...
Click to collapse
You're evil to be happy that someone else have the same problem.
I tell you what, if I have aids, it'll calm me down if you did too. XD
poetryrocksalot said:
I haven't installed the 1% battery, I usually wait 1-3 months for bugs to clear up before I start installing something new.
I agree with the "size" doesn't matter.
One question though, what do you mean it fits perfectly? Does your battery have a gap between battery cover and the device? If you look at picture 21, There is a noticeable gap between the new cover and the device. It still holds on to the phone but dust and moisture can get into the battery more easily
You're evil to be happy that someone else have the same problem.
I tell you what, if I have aids, it'll calm me down if you did too. XD
Click to expand...
Click to collapse
I saw your pictures, and yes I *do not* have the gap you have on the side the plastic cover meets the casing close to the SE logo. The plastic cover meets the edge of the phone case more smoothly than the pics you posted.
I have had my phone shipped to SE twice for the famus cracking problem, and the first time I received it back that plastic backing (of the phone) was not fully aligned even witht he metal cover...I had to press the plastic cover until it 'clipped' back in place. I am not saying that your issue is on the phone side, but it is somewhere...
Perhaps mugen's shipped you an early run of the plastic top....
i notice a few comments about sonys build quality...remember that this was built by HTC... i think sony was as dissappointed as we are and theyve given them the boot. rightly so.
i wonder if this is two "normal" batterys strapped together internally?? lol. it wouldnt be the first time a company has done this. from the thickness and the construction i wouldnt be surprised. and from the way the battery drains this seems to support this. that would explain why it drains at the same rate as a normal battery. youll probably get to near zero and then youll have many more hours before it runs out because then its draining the second battery. hopefully your update when youve completely drained the battery will shed more light on this.
whats different about the charging illumination? mine has always flashed three then a single one. and from what i can tell this is the standard. charging sequence.
thanks for the extensive review, it was very helpful.
anothadave said:
i wonder if this is two "normal" batterys strapped together internally?? lol. it wouldnt be the first time a company has done this. from the thickness and the construction i wouldnt be surprised. and from the way the battery drains this seems to support this. that would explain why it drains at the same rate as a normal battery ...
Click to expand...
Click to collapse
I would not think that this in the case, as the stock battery is 1500mAh, and the Mugen is 3600mAh... the battery drain is always proportional to the applied load, so, given the extra capacity and the same load (the x1) you will have a longer runtime. The only issue is, the bios will not be able to 'read' the additional capacity, as it is not calibrated for it.
We expect overall performance of the battery to be somewhere in the middle, i.e. about 2/3 of the nominal 3600mAh capacity...as xda devs have always given us new things to play with, there even might be an updated battery.dll or calibration configuration we'd eventually be able to test with it.
anothadave said:
i notice a few comments about sonys build quality...remember that this was built by HTC... i think sony was as dissappointed as we are and theyve given them the boot. rightly so.
i wonder if this is two "normal" batterys strapped together internally?? lol. it wouldnt be the first time a company has done this. from the thickness and the construction i wouldnt be surprised. and from the way the battery drains this seems to support this. that would explain why it drains at the same rate as a normal battery. youll probably get to near zero and then youll have many more hours before it runs out because then its draining the second battery. hopefully your update when youve completely drained the battery will shed more light on this.
whats different about the charging illumination? mine has always flashed three then a single one. and from what i can tell this is the standard. charging sequence.
thanks for the extensive review, it was very helpful.
Click to expand...
Click to collapse
Exactly! Mine flashes three at the same time, and then 1 flashes alone. However, the instruction says that the flashing pattern rotates, but don't. Although, prior to yesterday, I didn't even know the "specific" illumination pattern for charging was 3 lights, then 1 light, WITHOUT rotation.
And about the HTC build quality. I also thought that SE switched to Mobinova because of the bad HTC build quality. However, I am not looking forward to the X2 as much because Mobinnova has only made 1 phone, and the public opinions on this phone are so far VERY BAD.
I think SE should switch to Nokia and Nokia should switch to Windows Mobile. Otherwise, just stick with HTC and give them another chance.
So far, the battery meters of my phone all say 0% and the the phone is still on for 30 minutes now. Prior to this, when the phone was 10 and 5 percent, I got messages that the battery was low, and then very low... but I am really looking forward to XDA developing us a driver, but I bet those people who can develop these drivers need donations for a test battery.
Also, prior to when I said that the extended battery drains at the same rate as the OEM battery was because the extended battery works awkwardly. I think the battery will last longer, than I thought. Basically, the phone only recognizes about 50 to 75 percent of the battery's current charge. The remaining 50 to 25 percent aren't included in the battery meter.
I also think that if you want this phone to charge to 100%, you have to leave it charging for an extra hour after the battery meter reaches 100%...since I am sort of uncertain whether 100% is actually 50% to 75% or 100%
I think that the battery still charges after 100% but when it reaches 100% the battery meter stops counting, and when you drain the phone it will reach 0% because the remaining charge is not remembered by the device.
I am unsure of this. I could be wrong.
Perhaps the battery program Batti 2.4 can show the 'real' power?
I have the mugen 1800 and it also shows strange behavior with the power meter, like when the meter shows about 30% left.... a few minutes later phone dead, battery empty!
michaelthemage said:
Perhaps the battery program Batti 2.4 can show the 'real' power?
I have the mugen 1800 and it also shows strange behavior with the power meter, like when the meter shows about 30% left.... a few minutes later phone dead, battery empty!
Click to expand...
Click to collapse
I am using WisBar advance, it has a battery meter, and it works EXACTLY the same as Batti Power indicator. I already told you...all of my battery meter shows the same results.
It has been about 2 hours of non stop Rock Music (Pocket Player) and the the phone still has enough juice to keep playing at 0 percent charge!!!!
Don't know that program. Can it show the juice too? Would be interesting if those batteries 'really' have 1800 or 3600.
And how is the battery's temp after 2 hours of music nonstop?
i also noticed the right side of the chrome edge left a little gap between it and the back cover. it must have been because of the many times i took off the battery cover.
michaelthemage said:
Don't know that program. Can it show the juice too? Would be interesting if those batteries 'really' have 1800 or 3600.
And how is the battery's temp after 2 hours of music nonstop?
Click to expand...
Click to collapse
It's been 3 hours now, and the music is still running, the battery is warm but not hot. Of course it's not like I am talking on the phone. A phone gets hot when you talk and press your cheeks, not when you play music.
Edit: It took like 5 non stop hours of non stop music to deplete itself after the zero percent mark. As for the amount of hours after the Zero percent: it doesn't matter, because the battery drains just as fast as the battery drains on the standard battery.
I work directly with China's largest manufacturer of Extended batteries. They finished the AT&T Samsung Vibrant for T-Mobile and I've sold a bunch already with 100% feedback on Ebay. Userid is kevinjmoore. Unfortunately, they don't want to make a mold for the Captivate because they don't think there is enough demand in the USA to warrant it. To prove them wrong, I am trying to generate interest so that I can pay for the door mold charge and have them produce a bunch. The battery is the same as the Vibrant so that part is done. It is a 2800maH, which is nearly double the capacity and does last more than twice as long as stock--I know, I have the phone. Please email me at kevinjmoore at gmail dot com to get more details and help us get this rolling. I've reviewed all the forums out there and battery life is definitely one of the top issues. The rubberized door feel is awesome and it doesn't add a bunch of thickness to the phone like you think it might. Total production time is 20-25 days. My price will be at most $40 incl shipping. I may bring it down if demand is high enough. I will need a minimum of 50% fully refundable deposit. If I don't get enough demand in 30 days, I'll refund completely (less $0.30 Paypal fee). Please forward this, tweet this, facebook this and let's get this thing done My communication and customer service is second to none. We are building a US based website that will be up in 2 weeks detailing the over 35 other phones/extended batteries and hundreds of accessories (including IPAD and IPHONE) that we carry.
I found this pic on ebay:
http://cgi.ebay.com/Samsung-Vibrant...448289815?pt=US_Batteries&hash=item1e5f52f017
There is no way I would do that to my captivate. Just make a battery that fits in the factory space that has a 25% more power and i would be happy.
alphadog00 said:
I found this pic on ebay:
http://cgi.ebay.com/Samsung-Vibrant...448289815?pt=US_Batteries&hash=item1e5f52f017
There is no way I would do that to my captivate. Just make a battery that fits in the factory space that has a 25% more power and i would be happy.
Click to expand...
Click to collapse
+1
10chars
I would do it in a second for double the life are you kidding me! As long as the back cover had some sort of style to it.
unfortunately I'm gonna wait for the seidio 3000mah extended battery.
Sent from my SAMSUNG-SGH-I897 using XDA App
Ewwwww...
That looks fugly as hell... I would get 2 extra OEMs w/ desktop charger instead...
Doesn't look horrid for the Vibrant. But the Captivate? Yea.. look like a damn camel hump or a hemorrhoid on the back of my phone. No thanks.
I had one on my Dream and other than being somewhat a nuisance for carrying cases/belt clips it was well worth it. In fact it worked so well I sold it to my buddy who had a dream when I switched to the captivate. He loves the damn thing cause he can use his phone all day long now without having to charge it.
I am a someone who prefers function over cosmetics. If it works better but is uglier wtf cares? When was the last time you looked at the back of your phone and was like wow- that sure is purdy You don't interact with the back of your phone. Also with the back being rubberized I would find it easier to rest on my shoulder during long tech calls with clients as I dont use bluetooth headsets. Just this morning I almost dropped my cap as it slipped from my hand getting out of the car- luckily I caught it, but still with the rubber this is less likely to happen. Again.. function over form all day all long.
I carry mine in my pocket. I like the captivate because it's thin. If I need to I'll carry spare battery before I double the thickness of the phone...I'm just sayin'
Mike
if i had the battery i could make the dies. are you looking to make a plastic cover or stamp an aluminum one?
anyway it would be nice to have on hand for trips or events where i dont know how long i will go without a charger. i dont think i would walk around with that in my pocket but it would be nice to have one available for occasional use and there are plenty of people that have come around here complaining about horrid battery life. i find the battery life quite good and in an every day environment you can always plan around it but obviously some people want more or just like to complain.
If I traveled, I would be all over this. Unfortunately, the $9 2-pack of batteries with wall charger on eBay just doesn't makes this as economical when I can just reach over and pop in a fresh battery and have the old one start charging.
It adds a "WHOPPING" 6 mm to the phone (not even 1/4"). I gave it to my friend to hold and he said he actually liked the feel better with the door that way. It felt more stable and fit perfectly to how you cradle your phone. The door is better than stock and fits easily in your pocket. It is NOT bulky at all. To not have to charge your phone every 7 or 8 hours if you are a moderate to heavy user is so worth it. I can't imagine not having it or carrying around 2 or 3 batteries all the time.
It is 6mm extra on an 11 mm phone (about 50% thicker for double capacity). It's a no-brainer.
i think you'd sell them but i think this might not be the right forum for it, the less than enthused response doesn't mean that people who travel aren't looking for something like this, it just means that we dont have that many people on the forum looking for this. are you getting feedback on your ebay store asking for it?
Email me at kevinjmoore at gmail to discuss.
Correct me if I am wrong but...
Isn't our metal back plate aid in reception? I thought the antenna was in direct contact with the back plate. Seems to me that a big piece of plastic holding in a big battery would give us signal loss...
Shovelhead84 said:
Correct me if I am wrong but...
Isn't our metal back plate aid in reception? I thought the antenna was in direct contact with the back plate. Seems to me that a big piece of plastic holding in a big battery would give us signal loss...
Click to expand...
Click to collapse
no it appears to be grounded not an antenna but i could be wrong i dont know much about cell antenna design. there are two contacts and one goes to the metal chassis indirectly through a shiny plating on the back of the plastic housing. the other goes to the board but i didn't trace it to tell if it went to the points that contact the chassis and plastic cover, electronics today can be difficult trace.
i know some antennas form a loop and it can very well be an antenna but i find that my phone works fin with the battery door removed. also there is no reason a new batery door cant be stamped from aluminum. or lined with aluminum tape.
I assume that you can't have a battery like this and use a case like the Body Glove Mirage? Are there alternative cases that will work with a battery like this?
A better solution would be a silicone case with a pocket for a spare battery. Carry it when you need to and switch when you need to.
a picture (if you have a functional unit) would be a lot helpful...
waghoba said:
a picture (if you have a functional unit) would be a lot helpful...
Click to expand...
Click to collapse
I agree. Any/ all pictures of all angles would be highly appreciated. Only then can i make my decision. I too am interested in this.
alphadog00 said:
A better solution would be a silicone case with a pocket for a spare battery. Carry it when you need to and switch when you need to.
Click to expand...
Click to collapse
Now this wouldn't be a bad idea either....
Espaa Valorum said:
I assume that you can't have a battery like this and use a case like the Body Glove Mirage? Are there alternative cases that will work with a battery like this?
Click to expand...
Click to collapse
From my experience with the BG Mirage + the specs provided by the OP, its a definite No. Not with 6mm (50% thicker) but i would applaud anyone who would try it. Who knows, it might actually work out. Now if only Otterbox cases work with ANY extended batteries..........then I am ALL OVER IT.
Ok, ok, its an ebay purchase. However i did look for items that are at least packaged better than cardboard box.
In this case i bought retail packaged fairly genuine looking item.
However peeling off label reveals beaten up, scratched and dented body. Print is black ink, not etching/pressing.
Writing as follows:
LS LP54657SA-V
CT13 AY07
Reverse side is blank with some more scratches and dents.
Weight of the battery is 1-2g less than original (33g vs 31-32).
Googlefu reveals some chinese manufacturer (TIANJIN LISHEN BATTERY JOINT-STOCK CO LTD) and "Li-ion Prismatic" type (whatever that means).
Never i seen it described as samsung product.
Will add photos later.
I am pretty sure its fake, can someone comment on my findings ?
Someone ? Anyone ?
Could you post detail photos of your original batteries please ?
Dealing with seller that states the battery is legit, but i call BS...
Really need help with this.
sliex said:
Someone ? Anyone ?
Could you post detail photos of your original batteries please ?
Dealing with seller that states the battery is legit, but i call BS...
Really need help with this.
Click to expand...
Click to collapse
Ok, the weight: that is part of the truth. I've got fake batteries which were considerably lighter than the original. Apart from the label, the black printings are not comparable to anything else.
Quick test: discharge any residual charge from the original battery and from this one. Then turn off the phone and measure the charging time of both batteries. You should have a rough idea of how much "juice" the phone is storing inside the two akkus.
WARNING this battery was produced a while ago, even if you get an new one, it's old because it was lying around a long time now (decreased capacity, phone turns off while still at about 20-40%) ---- And, the battery I described im this post was a fake one. Later I purchased a original one, but it had the same life in it like my old nexus 5 battery
I'm gonna open a new thread soon with an updated guide, and a new battery by another phone
There it is! https://forum.xda-developers.com/google-nexus-5/accessories/nexus-5x-battery-bl-t19-2700mah-battery-t3739848
Long life nexus5!
########################################################
below is the old guide, you have been warned, I really don't recommend it anymore
I bought a new Lg g2 battery from Amazon because my sot was really short. You guys know the problem with those too fat batterys, so I ordered one that seemed to be flat.
I got a thick one seen here http://tanstartrade.ca/images/LG%20BL-T7.jpg
Okay, I thought, well then i don't have wireless charging ans NFC
But when i removed the layer on the battery, this is what i found: http://imgur.com/a/XJyJm
Cool I thought, that's just a piece of plastic that can be removed. My battery is now flat as it should be and you can do the same, if you still rock a Nexus 5, love this phone so much!
awsm man...can u tell me the procedure for this mod..nd the link for battery...
riThviK995871 said:
awsm man...can u tell me the procedure for this mod..nd the link for battery...
Click to expand...
Click to collapse
There are a lot of tutorials And i think you can buy every battery you want, search on Amazon. I just found out that every battery is flat.
Sorry, but I am confused... It seems two different mods exists: 1. LG G2 FLAT battery, no hacks needed. 2. LG G2 standard battery, hacks needed.
Could anyone please cast light on the 1. mod? I mean, where to purchase this kind of battery and so on.
xabivaz said:
Sorry, but I am confused... It seems two different mods exists: 1. LG G2 FLAT battery, no hacks needed. 2. LG G2 standard battery, hacks needed.
Could anyone please cast light on the 1. mod? I mean, where to purchase this kind of battery and so on.
Click to expand...
Click to collapse
That was my problem, i think the flat ones are fake. The thick ones have this plastic shield in in, by whatever reason. I managed to buy a flat one and it didn't work, the battery had very bad voltage, my phone turned off at 60%
The thick one is genuine i think. You just have to remove the sticker and plastic.
Thanks for the info @234herobrine432 . So you think that if I buy this battery I will only have to peel the "bump" and the sticker and it *should* fit in my Nexus 5?
xabivaz said:
Thanks for the info @234herobrine432 . So you think that if I buy this battery I will only have to peel the "bump" and the sticker and it *should* fit in my Nexus 5?
Click to expand...
Click to collapse
Yes! I think, technically it's not even possible to build a battery with that weird increase. And the "not fake" batteries fit better in the nexus 5 than the flat one I bought. You don't even have to dremel something.
did you test dat? those are awesome news brother, does taht actually work? do you managed to remove that plastic?
do it for science please
I bought it
xabivaz said:
Thanks for the info @234herobrine432 . So you think that if I buy this battery I will only have to peel the "bump" and the sticker and it *should* fit in my Nexus 5?
Click to expand...
Click to collapse
I bought the battery today. So, in a month more or less I could provide some news about it. I feel confident cutting and soldering battery connectors but I don't plan to use a dremel on my loved nexus 5 Hopefully this battery plus some kernel optimizations would improve substantially battery life. Going from 2.300 to 3.000mAh should suppose +30% increase!!!
---------- Post added at 07:50 PM ---------- Previous post was at 07:45 PM ----------
234herobrine432 said:
I bought a new Lg g2 battery from Amazon because my sot was really short. You guys know the problem with those too fat batterys, so I ordered one that seemed to be flat.
I got a thick one seen here http://tanstartrade.ca/images/LG%20BL-T7.jpg
Okay, I thought, well then i don't have wireless charging ans NFC
But when i removed the layer on the battery, this is what i found: http://imgur.com/a/XJyJm
Cool I thought, that's just a piece of plastic that can be removed. My battery is now flat as it should be and you can do the same, if you still rock a Nexus 5, love this phone so much!
Click to expand...
Click to collapse
What is showed about battery capacity when used apps like accubattery or similar @234herobrine432 ?
I've just bought one, hopefully it will be a good replacement for my old nexus original one!
Please keep us updated!
Please keep us updated!! :angel:
It would be huge help for people on this forum!
mlinaje said:
I bought the battery today. So, in a month more or less I could provide some news about it. I feel confident cutting and soldering battery connectors but I don't plan to use a dremel on my loved nexus 5 Hopefully this battery plus some kernel optimizations would improve substantially battery life. Going from 2.300 to 3.000mAh should suppose +30% increase!!!
---------- Post added at 07:50 PM ---------- Previous post was at 07:45 PM ----------
What is showed about battery capacity when used apps like accubattery or similar @234herobrine432 ?
Click to expand...
Click to collapse
gasgallo said:
I've just bought one, hopefully it will be a good replacement for my old nexus original one!
Click to expand...
Click to collapse
How did you fit the larger G2 battery without using a dremel on the N5 frame ?
The battery I've got is actually unusable on a Nexus 5, it's large the same, it's thicker but you can actually make it flat, but it's anyway longer so it won't fit the phone without hardware workarounds!!
You can folt the battery, so it will fit, but make sure you don't tear the thin foil (like me)
Yes i ****ed my battery up, it still works bc i used tape but it's not the best solution
I bought another battery on amazon for 13€
it will arrive maybe tomorrow (or later)
I will take pictures how i fold it and fit it into my device
If somebody wants to know: i had 4 hours of sot with heavy usage with the new battery, now it dropped to 2 because of the damage yeah liion doesn't like O²
Screenshots of the battery please !!
I just checked my "thick" one (bought by mistake before getting flat one), definitely not a plastic piece for my bump.
First off, it was super hard to get under the wrap, found out it was because mine didnt have an "extra" piece on top of the foil wrap for the battery, I had to open the foil itself to see the bump.
An exacto knife and, ofc, one spark later, I found the bump is actually layers of copper connected to the control board...
I feel yours was basically a flat battery with the plastic in to make it look like the non-flat ones.
Battery has a plastic easy to remove, as the post claimed. See the pictures at
http://imgur.com/a/DnTB8
Detaching external plastic the battery seems to be enough thin for the Nexus 5 case.
It had just arrived yesterday. I will try to do my best and talk about the length of the battery, my only concern right now.
I will keep posting.
Long life XDA!
People, please post pictures of your modding procedures !
Thanks !
Any updates on this mod, photos and measurements? id like to see how well the battery you had posted about works.
Sorry guys for my late answer!
I have to apologize, the battery I ordered was fake, at least I now think that. My new battery is a real Oem one, so, it's thick and theres no way to remove this thickness
So I lost wireless charging and Nfc, and my phone is close to flat at the back (still a bit round) but I didn't have to grind anything, the battery board sits on the side, not on the top or botton, gonna upload some photos later here.
My Sot increased a lot, i now get 5h easy with a lot of usage (pdf file editing) bc i'm using it in University.
and the sot gets better and better because of callibration
(resettimg the battery stats file isn't all, obviously that's only a log file)
so yeah, when you don't need wireless charging, buy a battery for our lovely nexus 5, this phone is awesome!
Hey there, I am intending to get a replacement battery for my S20 ultra, I have found the brand X-Longer to be providing rather cheap aftermarket replacement batteries for it. Does anyone have any experience with this company? All I can find about them are reviews for their external batteries.
Before anyone asks, I *can* get an OEM battery, but for twice the price. The particular model I am referring to is `EB-BG988ABY 4900mAh HQ`.
Apologies of this breaks any post rules or something, this is my first time posting here. Appreciate any responses beforehand.
Welcome to XDA.
Get OEM if possible. The newer the manufactured date the better.
Be very careful removing the battery; don't damage the display. Use a -small- amount of anhydrous isopropyl alcohol to loosen the adhesive strips as needed.
Replace the rear cover seal with a new one.