Hi bros
i tried to flash Android 5 20A to my LG G3 phone with LG Flash Tool. But then system crashed immediately. Right now I cant open phone in recovery mode, i cant use hard reset. I cant open download mode. And even computer cant see my phone with usb. On the top left corner, blue and red lights always lighting when i tried to open download mode.
same here
Hi I have just send it to lg assistance
Search for G3 unbrick here in xda or google. There's a few threads about how to "unblock" the phone.
I've done it twice already because of tests on it...
This thread is supposed to also work on the G3. Thought it might help:http://forum.xda-developers.com/showthread.php?p=50775936
akeldan said:
Hi bros
i tried to flash Android 5 20A to my LG G3 phone with LG Flash Tool. But then system crashed immediately. Right now I cant open phone in recovery mode, i cant use hard reset. I cant open download mode. And even computer cant see my phone with usb. On the top left corner, blue and red lights always lighting when i tried to open download mode.
Click to expand...
Click to collapse
I think phone of you unplug battery , Hold volue + inplug battery + and connect cable
If phone detect driver 9008 phone hardbrick
i can unbrick.
tungkick said:
I think phone of you unplug battery , Hold volue + inplug battery + and connect cable
If phone detect driver 9008 phone hardbrick
i can unbrick.
Click to expand...
Click to collapse
Hello my dear friend, I am having the same problem please help. Thank you. I got an email attachment.
[email protected]
Hi.
I had the same issue. All i did is do a hard reset on my phone by holding volume down and power button, when you see lg logo release the keys and press power button as fast as you can until you see hard reset.
Hello ! I had a problem on my FE375CG. It was rooted, and after an ASUS update, my device stuck with only a USB logo on the screen ! No Boot Droid nothing. There was a lot of error and I was unable to flash my device with Fastboot...
But I prepared a kit with a lot a tools to unbrick the devices ! I don't really know who are the authors of this tools, but here is the pack !
First Download the package : "Unbrick_Fonepad_7.zip" : https://mega.nz/#F!qM0EECyA
Second, unzip the package. Install the ADB drivers and the Intel DnX USB Drivers.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Connect the tablet to your computer : It should be recognize, screen remaining off.
Then you have to run the "Predowngrade.cmd" in the "3 - PreDebrick" directory.
At the end, you will see an Intel Logo (hourra). Disconnect you device, power off.
Then you have to run the "Downgrade.cmd" in the "3 - Full Debrick" directory.
The processus will stop, and the intel logo appears again.
Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Disconnect you device, power off.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Reconnect your device
And hit enter on your computer.
And... Tadaaaaaaaaaaaaaaaaa ! It should work again ^^ ! You have just to flash the last firmware with Bootdroid ! Last firmware can be found here : https://www.asus.com/support/Download/28/7/0/10/Ss6JyhD8bOcmeH6f/32/
Sorry for my english, I'm french ^^ ! Hope it will help some peoples.
Will this work for k004?
Hello,
my FE375CG is bricked: when I turned it on, it's stuck on INTEL logo.
I tried your method, but, after third passage, I can't turned it off. So I waited battery discharge, but when I plug to recharge, the tablet turned on and stuck on INTEL screen, I' can't proceed to the fourth step (I' can't maintain + and - and power on your device for 4 seconds, it turns itself on, remains on INTEL bootscreen and I can't do anything)
Have you some suggestions?
This tutorial work for K01N/FE171CG??
Alviyansyah said:
This tutorial work for K01N/FE171CG??
Click to expand...
Click to collapse
I'd like to know as well.
Sent from my ASUS_Z00LD using Tapatalk 2
Successfully unbrick my ASUS FONEPAD 7 (FE375CG)
after trying more than 10 times i am succeeded. 2nd step of fulldebrick is quite difficult but it works.... volume + and - and power button pressing just 4 second and at 3rd second the screen will flash lightly which can be observed in dark environment.
help me please......... i have an FONEPAD 7 , but its ME175CG... probably i've bricked the device... i cant load recovery mode, the device is blocked in logo android green, and my pc doesn't read nothing!!! PLEAZ HELP ME!!!!
Fonepad k004 me371mg
Hello. I need a help tô my fonepad k004 me371mg. Its bricked. No droidboot. .. no system... nothing. .. only asus logo or usb cable logo. .. the imagem o found only raw formar. ... Tks
Is work in K00E? i need help
suzukube said:
Hello ! I had a problem on my FE375CG. It was rooted, and after an ASUS update, my device stuck with only a USB logo on the screen ! No Boot Droid nothing. There was a lot of error and I was unable to flash my device with Fastboot...
But I prepared a kit with a lot a tools to unbrick the devices ! I don't really know who are the authors of this tools, but here is the pack !
First Download the package : "Unbrick_Fonepad_7.zip" : https://mega.nz/#F!qM0EECyA
Second, unzip the package. Install the ADB drivers and the Intel DnX USB Drivers.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Connect the tablet to your computer : It should be recognize, screen remaining off.
Then you have to run the "Predowngrade.cmd" in the "3 - PreDebrick" directory.
At the end, you will see an Intel Logo (hourra). Disconnect you device, power off.
Then you have to run the "Downgrade.cmd" in the "3 - Full Debrick" directory.
The processus will stop, and the intel logo appears again.
Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Disconnect you device, power off.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Reconnect your device
And hit enter on your computer.
And... Tadaaaaaaaaaaaaaaaaa ! It should work again ^^ ! You have just to flash the last firmware with Bootdroid ! Last firmware can be found here : https://www.asus.com/support/Download/28/7/0/10/Ss6JyhD8bOcmeH6f/32/
Sorry for my english, I'm french ^^ ! Hope it will help some peoples.
Click to expand...
Click to collapse
Your tutorial is not working for ASUS K004 and file xfstk-dldr-solo can not be run..
My device is not recognized by the pc. It shows the usb logo everytime. I opened the back cover and disconnected the battery. As soon as i connect the battery it turns on by itself, vibrates twice and shows the usb logo. it only turns off if i disconnect the battery. Without the battery it has the same behaviour if i connect the usb cable. None of the keys works except the VOL- or VOL+ and VOL - or PWR and VOL-. If i press vol- or any combination that has VOL- and connect the battery or the cable the device wont turn on and is not detected by the pc. If i do it with vol + or power or a combination of both it starts like i said earlier with two vibrations and the usb logo but not being detected. I'm lost because it being detected by the pc is a requirement. I installed drivers from folder 1 - ASUS_Android_USB_drivers_for_Windows and folder 2 - IntelDnXUSBDriverSetup.
The device is a FE375CG (K019) Asus Fonepad 7
Tried with windows 10 x64 on 2 different computers.
PS: I have disabled driver signature enforcement.
Hi
How can I obtain .img files for K00E (me372cg) ?
if Predownload Cmd worked just proceed to full debrick Download-3cmd then install updated firmware BESURE TO RENAME OFFICIAL FIRMWARE TO MOFD_SDUPDATE.zip it will auto install in recovery mode.
Hi,
My phone : ZE550ML
When I tried to update the TWRP recovery I installed .img file then everything collapsed.
My phone was only booting in bootloader, even if I chose normal boot.
I tried to install another .img file and since my phone doesn't want to do anything. No asus logo, no usb logo, no color nothing.
When I press power button nothing happen however how long I press even with volume button.
I charged it for a day long then I tried like a lot of times this procedure : http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256 .
(Surprisingly when I connect my phone to my computer sometimes the xfstk software recognize it)
But I always get : FW+OS download did not complete because of limit reconnecting to device attempt number reached.
Does someone have any idea ?
Hello everyone,
so here's my problem:
Wednesday morning i took my phone out of my pocket and had a blackscreen. I tried to restart it and took out the batterie but i always got stuck in the LG Logo or a bootloop. Since i had TWRP and lineage OS installed, i tried to go into the twrp menu with the factory mode (power button + volume down) but after the "double yes" i always got a blackscreen.
So i went into the internet to fix it myself. I tried the "LG Flash Tool 2014" with the kdz. reset & the other Flash tool with the tot. reset. Both didnt recognize my phone. At this point, the only thing that worked was the download mode BUT not the recovery mode that usually comes after it. It just showed the download mode for some seconds and then a black screen. Later i noticed that my phone showed as a "qualcomm device" in the device manager, and the internet said that this was bad. So i used "Board diag" and "Smart boot diag" to fix it, but at the point where the device should have restarted, and the download mode should have worked WITH the recovery mode, i always ONLY had the 6 second download mode. After messing a bit with "Board Diag" i even got it to show up as LGE AndroidNet USB Serial Port in the device manager, which apparently was even more bad and only way to go back to qualcomm was to shorten the pins which i did. And it worked BUT now i was back with the qualcomm stuff.
So as you can see, i've prety much run i circles since wednesday... Iam now at a point where 3 different thingscan happen when I try to put my LG into download mode (volume up + usb cable):
1. Its recognized as a unknown device which is constantly connecting and diconnecting, so iam assuming my phone is bootlooping with a black screen.
2. The download mode icon shows on my phone and disappears after some seconds but my pc fails to recognize it.
3. Nothing happens and the screen stays black
When i only connect the usb cable, it shows a stuck charging icon for some seconds and then goes black. Connecting without a battery shows the "missing battery icon". I tried with 2 pc's, both having the LG mobile driver 4.2 and the qualcomm driver installed AND beeing in testmode. Both don't recognize the device. I also tried 2 batteries on my phone but it changes nothing.
I have a D855. And i know that my situation is pretty f*cked but maybe someone i able to help me anyway. Thanks alot.
Hello everyone, I have Zenfone 2 this device bricked but how I don't remember.
Before I could fix it via xFSTK downloader but this time it couldn't connect
No vibration
No fastboot mode, no download mode opening
When I plug charge, it is charging well...
When I open the phone it try to open but stack on Asus Logo forever.
I tried step by step this: https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
but 1.2 Connect Zenfone with computer IntelSoc Mode: is false because Computer doesn't see my device, I tried different laptops but still same...
How can I fix this issue could you help me please?
Thank you