Related
Has your nexus gone bad? Suffered from a damaged speaker, fried CPU, broken screen or similar? Here's the thread to share your exprerience.
Personally I bought my Nexus, brand new on September/October 2012. Sometime on August 2013 a got caught up in an endless bootloop, even odin or similar tricks couldn't save the day so took it to the repair centre (Smartec Greece) and had it back after 4-5 hours with a new motherboard. Pretty fast- problem solved, didn't have to pay something, even though I never got to know which part actually gone bad.
That's about it. I also have replaced stock battery with a new one as the old one was draining faster than the speed of light, no matter what rom I was on.
So let me hear ya!!!!
The goddamn USB port issue, couldn't charge my phone, until I poked that little bugger in there to rise it up a little, created such a hassle
Sent from my Galaxy Nexus using xda app-developers app
adellon92 said:
The goddamn USB port issue, couldn't charge my phone, until I poked that little bugger in there to rise it up a little, created such a hassle
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
You were lucky, after a year and a half of use my USB finally took a sh*t completely. Luckily the insurance I use has no deductable so I had to fire up my old Incredible 2 for a few days while I waited for a replacement. I'm so glad we have nandroid. All I had to do is unlock the bootloader on my new device, put TWRP back on and restore my nandroid. No hassle really.
WOW!
itasoulas said:
Has your nexus gone bad? Suffered from a damaged speaker, fried CPU, broken screen or similar? Here's the thread to share your exprerience.
Personally I bought my Nexus, brand new on September/October 2012. Sometime on August 2013 a got caught up in an endless bootloop, even odin or similar tricks couldn't save the day so took it to the repair centre (Smartec Greece) and had it back after 4-5 hours with a new motherboard. Pretty fast- problem solved, didn't have to pay something, even though I never got to know which part actually gone bad.
That's about it. I also have replaced stock battery with a new one as the old one was draining faster than the speed of light, no matter what rom I was on.
So let me hear ya!!!!
Click to expand...
Click to collapse
The same happened to me but I let the battery drain and then charge it for a bit to eneter recovery mode to restore from a back up. Why didnt you do that? I think your problem wasnt just a bootloop problem.
Powerbutton becoming faulty.
Sometimes worked sometimes didnt
Trashed my charge port one morning getting out of bed with a bad hangover..Forgot my phone was plugged and snapped the port right off :crying: I just bought a new charge port flex from ebay for $10 and replaced it myself in about 20 mins
itasoulas said:
Has your nexus gone bad? Suffered from a damaged speaker, fried CPU, broken screen or similar? Here's the thread to share your exprerience.
Personally I bought my Nexus, brand new on September/October 2012. Sometime on August 2013 a got caught up in an endless bootloop, even odin or similar tricks couldn't save the day so took it to the repair centre (Smartec Greece) and had it back after 4-5 hours with a new motherboard. Pretty fast- problem solved, didn't have to pay something, even though I never got to know which part actually gone bad.
That's about it. I also have replaced stock battery with a new one as the old one was draining faster than the speed of light, no matter what rom I was on.
So let me hear ya!!!!
Click to expand...
Click to collapse
Last year my Nexus dropped into the sea, but luckily survived
My Nexus's battery was damaged so from phone service I got a new one in 2012.
Then My Galaxy Nexus got a screen burn-in ("ghost image") and in the phone service they changed a screen, but my Nexus got that screen burn-in again..
Everything have worked so fine and I never used any other kernels on my Nexus, than the stock ones by Google and CM's kernel and ofc. my modified CM kernel., I have tried some custom kernels, but I never liked any custom kernel. My Nexus has scratches on its cases but screen has always been clean and good. :3
I'm really happy, that my Nexus looks like a new one, but only that screen burn in is annoying
I am on handset number five; one blown earpiece, two cracked screens and the last one had the interface between the digitizer and the motherboard come loose. I was able to wedge some paper between the battery door and phone body to make it work until the replacement came in. Thankfully I got the phone when beat buy had them for free and ponied up for the service plan.
Sent from my Galaxy Nexus using Tapatalk
Have mine for 2 years... only problem is an oled burn where the notification bar clock is... the green and red oleds have less brightens on lower brightenes levels... apart from that everything ok.
Sent from Asus MemoPad FHD ME302C
I'm past the 1.5 year mark with my gnex and the only issue I have so far happened when it fell from my recliner while connected to the charger. The micro-usb metal piece on the cable got bent from the impact and since then I get a weird buzz/rattle when the phone vibrates. Had to reduce the vibrator strength on fancy kernel to get rid of that specific annoyance.
This has been the case for about 8 months now and the phone is still charging fine. Why I don't know is if this is a symptom that will eventually lead to the dreaded no-charging issue that some have shared here.
Had to change whole charging strip. Gnex was showing frequent charging/discharging and battery would drain within an hour!
Sent from my Galaxy Nexus using xda app-developers app
1.5 year old phone. Volume-up button doesn't work, and hasn't for some time. To increase volume, I have to press volume down and then move the slider up on-screen. No big deal. Also had the USB port break a couple of months ago and had to get it changed. Otherwise it runs fine. Still on stock 4.2 ROM, I keep the GPS switched off most the time, and also have all the lower-level Google sync stuff disabled (screw Google), and battery typically lasts a day and a half of average usage.
Had the Galaxy Nexus since release day and it served me well. It was fast and I only went through a few. Last October I got my Note 3 so I retired my G'Nex, but now I'm going to be using it as a MP3 Player that I can just leave in my car vs using my Phone all the time. Just looking for a Rom that turns it into the Android version of an IPOD touch.
Hi all,
My wife's 5x appears to be very dead. I haven't found any similar issues on this phone or any other so I thought I would share and also see if anyone has advice.
So her battery was low and so my 4 year old says "Let me help you with that Mom, I will go plug it in." A few moments later he says "Hey mom, it isn't working" as he shoves the end of the baby monitor wall wart in and out of the headphone jack. The wife plugs the phone into the correct charger but it doesn't seem to work. She used her phone for a little while longer before the battery died.
Best I can tell putting the 7.5 volts across the headphone jack blew up a circuit in the phone that also charges the battery. I messed with it awhile and the charging screen did come on one time briefly but I haven't seen it since. The USB port had been perfectly fine before.
I took the phone apart to take a look but it didn't tell me anything I didn't already know. It looks like a new motherboard would be needed to fix it and would probably cost more than the phone is worth.
So in summary the only thing that should be plugged into the headphone jack are headphones.
Any advice? Know a magic fix? We are both perfectly happy with our 5x's and had no plans to upgrade. She needs a Fi compatible phone so options are limited. The Moto x4 doesn't seem like much of an upgrade, new pixels are way too much phone and too much money, the old pixels are more than I want to spend for a used phone. I am thinking I will just pick up a used 5x from swappa as they are going cheap and I won't be out much, just worried about getting the BLOD, we have avoided that so far but it scares me more when getting a phone of unknown history. Would I be crazy to buy a used 5x knowing about the potential of the BLOD?
Thanks
shaunskie said:
Would I be crazy to buy a used 5x knowing about the potential of the BLOD?
Click to expand...
Click to collapse
Not necessarily, LG has been fixing out-of-warranty 5X phones with the bootloop problem. I don't know if they'd extend that courtesy to the 2nd owner of a phone but you can probably find out more by searching the 5X forums for recent posts with "LG repair warranty" in the text.
Thanks,
It looks to be a little bit of a crap shoot if a secondhand warranty will be honored but I think might just do it anyway. At least it is a pretty small investment if it would fail and not be covered under warranty.
I think I will give it a shot on the current phone for the extended warranty also but expect to be quickly shoot down. It was bought through project Fi two years ago but what I've read seems to indicate only the BLOD is being covered by the extended warranty.
I wish there were more options for project fi phones on the budget end. Should I be considering the X4 or second hand 1st Gen pixel?
I am making this post so it is more broadly seen by people who have a specific hardware issue.
This solution is for issues specifically with the board being fried or more likely broken solder connection. I found this solution while browsing Chinese Custom Rom threads and apparently it works.
Absolutely it's better to pay a professional reball the broken solder connection.
There is a do it yourself/cheap method that definitely does not involve using an Oven.
I included photos at the bottom of the link and rather than create a redundant post, for something that I have already made : Go here for the Jerry Rig Suggestion
https://forum.xda-developers.com/showpost.php?p=79303956&postcount=72
Good Luck
Make sure you followed all of the unbricking steps here https://forum.xda-developers.com/le-pro3/how-to/unbrick-leeco-phones-leeco-variants-t3847220 before even considering this method..
There are 3 unbricking methods mentioned
Qfil with Flash 2.0 or 1.9 ( Try both)
QPST ( Instructions in first comment of unbricking thread)
Flashbat.all method ( Instructions on Unbrick OP, and in first couple of comments)
Hi
What do you think, can I repair this problem? :
My phone is dead. It is not able to turn on, it just squezing sometimes, if I push the turn on button. The screen is full black since the shut down. No logo no any fastboot screen, nothing. The led light was pale green before the qfil.
drdagi said:
Hi
What do you think, can I repair this problem? :
My phone is dead. It is not able to turn on, it just squezing sometimes, if I push the turn on button. The screen is full black since the shut down. No logo no any fastboot screen, nothing. The led light was pale green before the qfil.
Click to expand...
Click to collapse
I wouldn't bother trying this possible solution unless you are 100% sure that you have broken solder connections. Just because your phone doesnt turn on doesn't mean its the chips. It much more likely that your issue is just the battery.
Also just so you know when the board is fried the phone will still turn on, and will boot to fastboot but not recovery, qfil works but does nothing and if you boot to fastboot and leave it on the fastboot screen the screen will turn to static. At least this is what happens with the majority of chip death issues. However there was one case that I know of on a friends X722 which could not go to fastboot, and that issue ended up being a fried GPU, which this possible fix may resolve.
If you are only getting a black screen leave the phone plugged in overnight ( preferably with a different cable) , After knowing that the phone was charged for long enough what happened? Did the phone get warm at all? Does the phone vibrate?
If the phone does vibrate, try using the QPST method, it's the 2nd post on the Unbricking thread mentioned above in the OP.
Another possible cause of your issue is static, they only way to test and possibly resolved is to unplug the battery from the board and plug back in again. Should you attempt trying this, only use a heat gun to melt the glue holding the screen on...there is alot and a hair dryer will not work, without damaging your LCD.
If I had your issue, I would order a battery and LCD, and swap the battery, there is a good chance it will work. If not you can move on to more drastic solutions such as the one mentioned in the OP. Worse case scenario, you will be out the cost of the battery which is about $7 and LCD which is about $15
Good Luck and make sure you followed all of the steps here https://forum.xda-developers.com/le-pro3/how-to/unbrick-leeco-phones-leeco-variants-t3847220
There are 3 unbricking methods mentioned
Qfil with Flash 2.0 or 1.9 ( Try both)
QPST ( Instructions in first comment of unbricking thread)
Flashbat.all method ( Instructions on Unbrick OP, and in first couple of comments)
I believe I read this thread before, but didn't read it well
This thing here I believe is very important, so much to put it in special color
>>Also just so you know when the board is fried the phone will still turn on, and will boot to fastboot but not recovery, qfil works but does nothing and if you boot to fastboot and leave it on the fastboot screen the screen will turn to static.
I guess it's certain now that I have some harware issue, most probably if GPU is separated from the CPU.
tsongming said:
the board being fried or more likely broken solder connection. I found this solution while browsing Chinese Custom Rom threads and apparently it works.
Click to expand...
Click to collapse
I don't know if it's just me who is unlucky but I have lost yet another USB board. This time the one you sent me burnt up as I connected it to my PC. I don't think it's a cable issue because I was using a high quality USB cable from BASEUS. How could it be that I'm not seeing more complaints like mine?
This time I think it could have been caused by dirt in the port because I'd just returned from my rural area and there I did a lot of work involving dirt. Also, there was a slight shower that got me on my way back and I keep the phone in the pocket with the USB port exposed and looking up. My patience with this phone has just about run out now. This is the worst investment I've ever made on a phone :crying:
Sent from my LeEco Le Pro3 using XDA Labs
twistyplain said:
I don't know if it's just me who is unlucky but I have lost yet another USB board. This time the one you sent me burnt up as I connected it to my PC. I don't think it's a cable issue because I was using a high quality USB cable from BASEUS. How could it be that I'm not seeing more complaints like mine?
This time I think it could have been caused by dirt in the port because I'd just returned from my rural area and there I did a lot of work involving dirt. Also, there was a slight shower that got me on my way back and I keep the phone in the pocket with the USB port exposed and looking up. My patience with this phone has just about run out now. This is the worst investment I've ever made on a phone :crying:
Sent from my LeEco Le Pro3 using XDA Labs
Click to expand...
Click to collapse
Wow, sorry to hear that. I think that those LeEco phones are hit or miss. But it really doesn't seem that they were made to last more that a couple of years. I have fried the usb card myself, when I bought very first leeco, its too easy to fry those cards, and in retrospect the Leeco charge is too powerful. The remaining Leeco that I have left charges much better ( stays cooler) when using my Xiaomi Charger.
I agree that you have had some really bad luck. I would not put any more money into it. you are better off buying a cheap Xiaomi...even a used one. You can find some good deals on Amazon and Swappa. Amazon also has refurbished Samsung phones, and they are highly reliable.
You can get a Galaxy 7 for $139 https://www.amazon.com/Samsung-Gala...s=wireless&ie=UTF8&qid=1573693012&sr=1-4&th=1 and they are really good phones.
Here is a renewed One Plus 6T for $267 https://www.amazon.com/OnePlus-A601...ked+cell+phones+renewed&qid=1573693220&sr=8-4
LG V30 for $177 https://www.amazon.com/LG-Camera-Si...ed+cell+phones+renewed&qid=1573693365&sr=8-21
I bought my daughter an A3 and honestly I can't recommend it enough. For a tight budget I personally feel that this is one of the best deals out there for ony $158 ( $50 less than what I paid 2 months ago) https://www.amazon.com/Xiaomi-A3-64...=sr_1_3?keywords=Xiaomi&qid=1573693435&sr=8-3
It has an Amoled Screen and comes with Android One with zero bloatware. You basically get a custom rom experience with a stock phone. To make matters better Android 10 will be released for the A3 in January. The camera, is light years better than the Le Pro 3 and the processor is honestly fast enough, for most of us. No doubt, its more expensive than just getting another card. But saving yourself from the hassles of these constant issues will make it worthwhile. The only drawback is the screen is 720 instead of 1080. But I swear, if you place in side by side with my Mi8, most people would never guess, that the resolution is a little less. Because it's still an amoled screen.
Best wishes, unfortunately I don't have any more working cards or I would send it to you.
I've learned that quick charge is dangerous. I'm using now an usb meter that doesn't let an output beyond 1.4amps to charge my phone now, it charges pretty quickly in fact and my phone doesn't get hot now (even that I live in a hot area)
tylerciggy said:
I've learned that quick charge is dangerous. I'm using now an usb meter that doesn't let an output beyond 1.4amps to charge my phone now, it charges pretty quickly in fact and my phone doesn't get hot now (even that I live in a hot area)
Click to expand...
Click to collapse
Yeah. The current pushed by the stock leeco charger is either too high (doubtful) or the charging system of the pro 3 isn't designed to handle quick charge 3 very well (most likely). I have used my stock leeco charger to charge my brother's Nokia 8 (Q.C. 3) and it gets just a little warm even with a case on. Also, the leeco charger is Quick Charge 3 certified so they must have made it according to Qualcomm standards.
I think it's the quality of the parts on the phone itself that are substandard. Since this USB board was sent to me by @tsongming and he had used it quite a while, I believe it could have been perfectly fine. My suspicion is that something else could be wrong with my phone like the USB flex cable. The kind of burning I saw must have been caused by power from the battery because the USB 2.0 port I was connecting to on my PC can only provide 2.5 amps maximum. This is not enough in my opinion to completely melt the usb-c receptacle on the phone. (It's very badly burnt). I will just have to charge the battery externally until I figure out whether it's worth investing any more money into this phone.
Sent from my LeEco Le Pro3 using XDA Labs
twistyplain said:
Yeah. The current pushed by the stock leeco charger is either too high (doubtful) or the charging system of the pro 3 isn't designed to handle quick charge 3 very well (most likely). I have used my stock leeco charger to charge my brother's Nokia 8 (Q.C. 3) and it gets just a little warm even with a case on. Also, the leeco charger is Quick Charge 3 certified so they must have made it according to Qualcomm standards.
I think it's the quality of the parts on the phone itself that are substandard. Since this USB board was sent to me by @tsongming and he had used it quite a while, I believe it could have been perfectly fine. My suspicion is that something else could be wrong with my phone like the USB flex cable. The kind of burning I saw must have been caused by power from the battery because the USB 2.0 port I was connecting to on my PC can only provide 2.5 amps maximum. This is not enough in my opinion to completely melt the usb-c receptacle on the phone. (It's very badly burnt). I will just have to charge the battery externally until I figure out whether it's worth investing any more money into this phone.
Sent from my LeEco Le Pro3 using XDA Labs
Click to expand...
Click to collapse
My X722 died because I just plugged in the cable to charge. Although I have to admit that the phone socket was not in optimal conditions because I used a crappy cable, so the last one I was using was charging fine but it had to enter in an specific position in order to quick charge to function. It's probably the charger IC that is damaged, but I haven't had the money to send it to repair.
As far as I know, the motherboards just provide 0.5amp unless you are using an special port that can provide more power.
In my opinion 2.5amp at 5v is not that good either, because it's pushing the limit of most phones at 5v.
I am guessing that buying the original $30 USB board from AliExpress won't buy me much time because they have all been used before. Almost every spare part of this phone is not brand new (except for batteries and screens, I guess).
I think it's time to cut my losses. My pro 3 not only needs a new USB board but also a battery and another high quality USB cable. I might buy all of that for $60 only to have the USB port burn again. It doesn't make any sense to keep pouring money into this phone.
Sent from my LeEco Le Pro3 using XDA Labs
What ? $30 usd ? I've seen it in $2.5 for 2 boards, well, not original of course.
You just need to check that it has the extra IC, because there are ones that doesn't has it... although I don't remember what was for that IC, but you can easy see it that some boards just are missing a chip.
As for the cable, I'm using some EFFE cables (EFFE is the brand) and they are working wonderfully, I bought 3 for $7 usd, they plug in fine and stay in too, they were recommended to me by a friend and I'm very happy with them. They even stop giving charge to my dead phone because they detect somehow that there is a short, well, at least that is what my usb meter tells me, although I don't know how do they manage to do that, I don't really think they have an IC in them.
twistyplain said:
I am guessing that buying the original $30 USB board from AliExpress won't buy me much time because they have all been used before. Almost every spare part of this phone is not brand new (except for batteries and screens, I guess).
I think it's time to cut my losses. My pro 3 not only needs a new USB board but also a battery and another high quality USB cable. I might buy all of that for $60 only to have the USB port burn again. It doesn't make any sense to keep pouring money into this phone.
Click to expand...
Click to collapse
For the record the board that I sent you came from a brand new, LePro 3 not opened bought in the spring 2018. However, I assume that it was made after Leecos public fall. I would guess that it was assembled with C grade parts, because my remaining, working LePro 3 is one of our first Leecos bought in 2016. It's also interesting to note that our 2 remaining X522s are both functioning just fine.
As you said could be the flex cables or just a shoddy soldering job that eventually shortened out the board.
Have you tested the board to be sure that it's not the port itself that is bad?
Another interesting thing to note is that Qualcomm removed Leeco from it's list of approved quick charge device list.
One last reason on why I feel that the charger itself may be part of the problem is that I have a 12 watt portable charger and the Leecos do not get hot at all when using it.
I threw my Leeco charging bricks in the trash after my daughter plugged in my Mi8 for me while I was cooking dinner. Not knowing that I had a preference, she used the Leeco charger.
Later when I checked the phone to see if it was finished charging, I found it was extremely hot, and this phone is rated for QC 4.0. So rather than taking any chances into the trash it went.
tsongming said:
For the record the board that I sent you came from a brand new, LePro 3 not opened bought in the spring 2018. However, I assume that it was made after Leecos public fall. I would guess that it was assembled with C grade parts, because my remaining, working LePro 3 is one of our first Leecos bought in 2016. It's also interesting to note that our 2 remaining X522s are both functioning just fine.
As you said could be the flex cables or just a shoddy soldering job that eventually shortened out the board.
Have you tested the board to be sure that it's not the port itself that is bad?
Another interesting thing to note is that Qualcomm removed Leeco from it's list of approved quick charge device list.
One last reason on why I feel that the charger itself may be part of the problem is that I have a 12 watt portable charger and the Leecos do not get hot at all when using it.
I threw my Leeco charging bricks in the trash after my daughter plugged in my Mi8 for me while I was cooking dinner. Not knowing that I had a preference, she used the Leeco charger.
Later when I checked the phone to see if it was finished charging, I found it was extremely hot, and this phone is rated for QC 4.0. So rather than taking any chances into the trash it went.
Click to expand...
Click to collapse
Wow!! Leeco really must have used grade c parts. I haven't mistreated that board even once since you sent it. That means it only lasted three months! It is just unbelievably negligent for leeco to use these parts. They must have been from the reject pile.
I don't need to test the board because the USB-C receptacle on the phone is completely melted. Connecting a charging cable seems to cause it to heat up fast and start smoking. It might have been a short on the connector that caused it to burn up. I think the quality of the protruding part with the pin connectors is just poor and repeated use loosens the pins which eventually touch.
I'm done with leeco for good now. I was thinking about fixing the phone to sell but that now seems like a lost cause. I'll keep it until it's dead and then take a hammer to it. Even selling it for spare parts might be a loss for me so I'm stuck with it.
Sent from my LeEco Le Pro3 using XDA Labs
twistyplain said:
Wow!! Leeco really must have used grade c parts. I haven't mistreated that board even once since you sent it. That means it only lasted three months! It is just unbelievably negligent for leeco to use these parts. They must have been from the reject pile.
I don't need to test the board because the USB-C receptacle on the phone is completely melted. Connecting a charging cable seems to cause it to heat up fast and start smoking. It might have been a short on the connector that caused it to burn up. I think the quality of the protruding part with the pin connectors is just poor and repeated use loosens the pins which eventually touch.
I'm done with leeco for good now. I was thinking about fixing the phone to sell but that now seems like a lost cause. I'll keep it until it's dead and then take a hammer to it. Even selling it for spare parts might be a loss for me so I'm stuck with it.
Click to expand...
Click to collapse
I am sure that they used low quality parts on those last batches of phone, I heard via a friend who lives in Shenzhen that they hired a 3rd party to assemble the final phones... The ones that came with 32gb drives, no nfc or quick charge etc. It sucks because they had so much potential.
Whatever you end up getting. Please do stay in touch, I have enjoyed our conversations and I wish you the best.
tsongming said:
I am sure that they used low quality parts on those last batches of phone, I heard via a friend who lives in Shenzhen that they hired a 3rd party to assemble the final phones... The ones that came with 32gb drives, no nfc or quick charge etc. It sucks because they had so much potential.
Whatever you end up getting. Please do stay in touch, I have enjoyed our conversations and I wish you the best.
Click to expand...
Click to collapse
This puppy is not out yet. I figure it's got one last hurrah before I throw in the towel. I've been shopping around for a phone with similar performance for around the same price but from the current generation of phones and I've not come across anything else. At least not in the same price range. Performance is very important to me and I just can't take a downgrade. I guess I'm stuck with it for a while.
Sent from my LeEco Le Pro3 using XDA Labs
twistyplain said:
This puppy is not out yet. I figure it's got one last hurrah before I throw in the towel. I've been shopping around for a phone with similar performance for around the same price but from the current generation of phones and I've not come across anything else. At least not in the same price range. Performance is very important to me and I just can't take a downgrade. I guess I'm stuck with it for a while.
Sent from my LeEco Le Pro3 using XDA Labs
Click to expand...
Click to collapse
Its good that it's still working for now. Unfortunately you probably only have 4 to 6 weeks before it stops working completely. I was thinking about you situation and made the list below of additional options/good deals.
The Snapdragon 665 has similar performance to the Snapdragon 821 and the Note 8, (the version with the SD665) can be had for under $200 : https://www.amazon.com/Xiaomi-Displ...keywords=Snapdragon+665&qid=1573874157&sr=8-2
If you can spend a just a little more the Mi8's price has dropped to $250, https://www.amazon.com/Xiaomi-6-64G...ef=sr_1_1?keywords=Mi+8&qid=1573874317&sr=8-1 and I can't recommend it enough. It's definitely my most favorite phone that I have owned and I know that you care about the camera a lot. I can promise that the Mi 8 has one hell of a great camera, and stock camera, is absolutely fantastic, especially with video. In fact, I prefer it for video over the latest Pixel 7.XXX Camera and yes it does Astrophotography.
As I mentioned before the A3, is much better than you would ever expect and you can find them for $150.
If budget is a primary concern: It is definitely worth looking at among the best new phones for the money. Plus the bootloader is easily unlocked with no waiting period. if you want a new phone for around $150. I honestly can't think of a better phone, and as I mentioned my daughter has this phone, so I have actually used it, and I am telling you, it's damn good.
Another option is buying a used 128GB Pixel refurbished $120
I have seen them for as low as $75, or you could buy a One Plus 3T
Edit: I just now found this phone and although it has a mediatek processor, its brand new , has Android 9.0 , 4gb ram, 64 gb hd space and it's just a little over $100 UMIDIGI Power This may be the one, if you can deal with processor but there's a lot of people who say that this phone is great, I dont know if you can use roms, but I have heard that it doesn't have bloatware, so it be a smart buy. Edit : The $118 price is a lightning deal, and the price will go backup to $139 by the time you read this. In that case, I would personally avoid it, but I am am a little biased against mediatek for reasons. Mostly heat and poor battery life.
tsongming said:
Its good that it's still working for now. Unfortunately you probably only have 4 to 6 weeks before it stops working completely. I was thinking about you situation and made the list below of additional options/good deals.
The Snapdragon 665 has similar performance to the Snapdragon 821 and the Note 8, (the version with the SD665) can be had for under $200 : https://www.amazon.com/Xiaomi-Displ...keywords=Snapdragon+665&qid=1573874157&sr=8-2
If you can spend a just a little more the Mi8's price has dropped to $250, https://www.amazon.com/Xiaomi-6-64G...ef=sr_1_1?keywords=Mi+8&qid=1573874317&sr=8-1 and I can't recommend it enough. It's definitely my most favorite phone that I have owned and I know that you care about the camera a lot. I can promise that the Mi 8 has one hell of a great camera, and stock camera, is absolutely fantastic, especially with video. In fact, I prefer it for video over the latest Pixel 7.XXX Camera and yes it does Astrophotography.
As I mentioned before the A3, is much better than you would ever expect and you can find them for $150.
If budget is a primary concern: It is definitely worth looking at among the best new phones for the money. Plus the bootloader is easily unlocked with no waiting period. if you want a new phone for around $150. I honestly can't think of a better phone, and as I mentioned my daughter has this phone, so I have actually used it, and I am telling you, it's damn good.
Another option is buying a used 128GB Pixel refurbished $120
I have seen them for as low as $75, or you could buy a One Plus 3T
Edit: I just now found this phone and although it has a mediatek processor, its brand new , has Android 9.0 , 4gb ram, 64 gb hd space and it's just a little over $100 UMIDIGI Power This may be the one, if you can deal with processor but there's a lot of people who say that this phone is great, I dont know if you can use roms, but I have heard that it doesn't have bloatware, so it be a smart buy. Edit : The $118 price is a lightning deal, and the price will go backup to $139 by the time you read this. In that case, I would personally avoid it, but I am am a little biased against mediatek for reasons. Mostly heat and poor battery life.
Click to expand...
Click to collapse
Tony, you're among very few people I know who are invaluable to communities like these. I'm always impressed by how easily you go out of your way to help community members at XDA. Thank you so much for always being helpful even when you don't have to be. If I had the means I would buy you several cases of beer (or whatever non-alcoholic beverage you like) just to say how much I appreciate you. But for now I can just say THANK YOU!! From the bottom of my heart.
Out of all the options you gave me just now and a few days ago, the brand new Mi A3 is the best option by far. Refurbished is a no-go and yes, I hate Mediatek too. Been there, done that, but once you've got a taste of Qualcomm, there's simply no going back. I'm inclined to go for the A3 because of its AMOLED screen, UFS 2.1, decent camera, and, most importantly, it's price-performance ratio. It doesn't beat the A2 in performance but it more than makes up for it in the additional features.
I am going to keep the pro 3 as long as I can to see if prices drop even more (I'm all about the value). It's only my charging port that's gone so I'm taking out the battery and charging it externally for as long as I can. Everything else works normally. I'm also on my last ROM for this phone -- I can't flash another one because I changed to TWRP 3.2.1 which doesn't see my internal storage anymore (encryption).
Sent from my LeEco Le Pro3 using XDA Labs
tylerciggy said:
What ? $30 usd ? I've seen it in $2.5 for 2 boards, well, not original of course.
You just need to check that it has the extra IC, because there are ones that doesn't has it... although I don't remember what was for that IC, but you can easy see it that some boards just are missing a chip.
As for the cable, I'm using some EFFE cables (EFFE is the brand) and they are working wonderfully, I bought 3 for $7 usd, they plug in fine and stay in too, they were recommended to me by a friend and I'm very happy with them. They even stop giving charge to my dead phone because they detect somehow that there is a short, well, at least that is what my usb meter tells me, although I don't know how do they manage to do that, I don't really think they have an IC in them.
Click to expand...
Click to collapse
Sorry I hadn't seen this post. The cheaper boards tagged as "copy" boards don't have working quick charge or ability to connect to pc for mtp file transfer. They're only good for slow charging and sometimes even that is hit or miss. The boards that cost between $25 and $30 are original leeco boards. Probably not brand new but original. They have all features of the original like quick charge, mtp, otg, cdla and everything else the new phone could do. I wouldn't even consider going close to the cheaper "copy" boards.
I had a single 50 cm baseus USB cable that i bought for around $4 and it was of very good quality. It even supported usb PD and it was built like a tank. Just holding it gives you confidence that it's gonna last a while. Even the board getting fried didn't damage the cable but I'm not using it again. The power pin on the usb cable changed from gold to just plain silver so it must have taken some damage. I would buy a new one to be safe.
I'm done repairing this phone for good. It's not worth the expense and there's too much uncertainty involved even after it's fixed. I could fix it and have it die barely a month later. That would be $50 down the drain. I'm not going through that again.
Sent from my LeEco Le Pro3 using XDA Labs
It seems this phone is on its last leg now. Since yesterday the proximity sensor doesn't work. I think it must be all this opening and closing up of the metal shield to remove the battery. Also, the earpiece speaker only works in loudspeaker mode now. It doesn't work in calls. I think I might have an audio related software issue because sound isn't playing even if I play a music or video file. I have flashed another ROM but this behavior remains. Could this require me to flash persist?
Edit: The earpiece and proximity sensor are acting up because of the damaged USB board. Both work well when I use an app that tests hardware features. They are failing to work for phone calls and video playback because the phone is detecting that I have earphones plugged in. I figured this out when I reflashed a new PIE ROM and saw the headphone icon is always displayed on the status bar even without anything connected to the port. I guess the board getting fried messed up with jack detection.
@tsongming Please tell me if this motherboard is le pro3 x722 or le pro3 x720.
https://drive.google.com/file/d/1DD0JQRZe4t4KOmedt0eEThaGEOKBH3AZ/view?usp=sharing
Hey guys, Im throwing in the towel.....
Ive been trying for the better part of a year to get my LGG4(s) to work as a time lapse machine. I work on boats and soend time up in the arctic form time to time, amazing scenery!
I got my first g4 last year as I wanted something a little better than my g3. I had also lusted after the g4 when it came out..... I bought a couple of8000mah batteries, got some 128gb microsd cards.... I thought I was set!!!
However Ive been chasing the overheating problem so much, Im just done. Ive burnt out 2 lg's to the point of being unresponsive... 2 more sometimes show a blue LED when plugged in....and I have 1 unopened.... Im just not having fun anymore.
When I set it up, to take pictures at every 3/4/5/10 seconds, or if I set the ap to create a vid natively, the cpu(?) runs upto 90degrees C! WHY!?!?!?!?!?! I thought the first one was just bad luck, the second one, I made copper heat sink with arctic silver paste. It helps, but not enough.... After a few hours they die.... Why or how could this design ever get out of the factory!?!?!?! steadfasterX has been awesome, but he really is at another level....I am just so far behind in knowledge I struggle to use the tools hes given. Sometimes Im missing pythonx or fwul can find wifi.... I just dont have the time for this anymore. The phones arent that good, compared to say a aPoco.. or a Pixel 3a. Plus all the updating for lineage, or AIOCP. I want to get there, but my time is more valuable than this......I should just buy a real phone (conversely the nokia 9 takes some amazing pictures!)
anybody want 5.5 lg g4? Ive got 2 that work, 1 unopened, 2 chassis, maybe 3 chassis, 4 reg batteries, and 2 8000mah batteries.....
</rant>
Hi! So, I installed Pixel Experience ROM on my Samsung Galaxy S7 edge. Few days later, it got splashed a bit. "No big deal", I thought, since it's technically IP68 Water resistant. It worked normally until I wanted to charge it. It started charging but after 10 minutes it simply stopped. I tried a different cable, different adapter, restarted, used a hairdryer, cleaned the USB port, still nothing. 12 hours later, the battery drained to 0% and my phone died. I was unable to boot or charge it anymore. Any suggestions?
Sandu_HD said:
Hi! So, I installed Pixel Experience ROM on my Samsung Galaxy S7 edge. Few days later, it got splashed a bit. "No big deal", I thought, since it's technically IP68 Water resistant. It worked normally until I wanted to charge it. It started charging but after 10 minutes it simply stopped. I tried a different cable, different adapter, restarted, used a hairdryer, cleaned the USB port, still nothing. 12 hours later, the battery drained to 0% and my phone died. I was unable to boot or charge it anymore. Any suggestions?
Click to expand...
Click to collapse
How did you ended up here ???
Jarod_S said:
How did you ended up here
Click to expand...
Click to collapse
man that's the same thing I'm saying to myself, idk he must be really desperate
oshane126(jamaican) said:
man that's the same thing I'm saying to myself, idk he must be really desperate
Click to expand...
Click to collapse
Is your Robin still alive ?
Sandu_HD said:
Hi! So, I installed Pixel Experience ROM on my Samsung Galaxy S7 edge. Few days later, it got splashed a bit. "No big deal", I thought, since it's technically IP68 Water resistant. It worked normally until I wanted to charge it. It started charging but after 10 minutes it simply stopped. I tried a different cable, different adapter, restarted, used a hairdryer, cleaned the USB port, still nothing. 12 hours later, the battery drained to 0% and my phone died. I was unable to boot or charge it anymore. Any suggestions?
Click to expand...
Click to collapse
Well in my opinion you'll have to buy a new phone, because water damage aren't something that can be fixed without replacing parts of your smartphone.
You can always change the battery adaptater but I doubt you'll find any replacement piece.
So either you go to a repair store and see if they can to something, or you buy a new phone. (And obviously not a Nextbit Robin, since it's not sold anymore)
I can advice a good Pixel 3a or and Oneplus 7.
Or if your price range allows it A Oneplus 7 Pro
RaiZProduction said:
Well in my opinion you'll have to buy a new phone, because water damage aren't something that can be fixed without replacing parts of your smartphone.
You can always change the battery adaptater but I doubt you'll find any replacement piece.
So either you go to a repair store and see if they can to something, or you buy a new phone. (And obviously not a Nextbit Robin, since it's not sold anymore)
I can advice a good Pixel 3a or and Oneplus 7.
Or if your price range allows it A Oneplus 7 Pro
Click to expand...
Click to collapse
The thing is I don't think it's water damage. The phone connects to my PC without any problems. It's not charging, though. So, I flashed Stock ROM with Odin. I thought "Maybe there was a software bug or something", but apparently it wasn't. I am forced to use a very slow Wireless charger that charges my phone in about 5 hours without using it...
Unfortunately, I don't even have $100 to spend on a new phone, since I bought this S7 edge not even 6 months ago from eBay at a good deal of $170. I'll have to replace my charging port, apparently, and from the tutorials on YouTube seems it's a pain to replace it...
Sandu_HD said:
The thing is I don't think it's water damage. The phone connects to my PC without any problems. It's not charging, though. So, I flashed Stock ROM with Odin. I thought "Maybe there was a software bug or something", but apparently it wasn't. I am forced to use a very slow Wireless charger that charges my phone in about 5 hours without using it...
Unfortunately, I don't even have $100 to spend on a new phone, since I bought this S7 edge not even 6 months ago from eBay at a good deal of $170. I'll have to replace my charging port, apparently, and from the tutorials on YouTube seems it's a pain to replace it...
Click to expand...
Click to collapse
Yeah, I the problem is that low power action (like data transfer through USB) can work, but high power is unfortunately not working due to water (I think).
Anyway the charging port is still faulty and, yes it's a drag to change.
Good luck with that
Jarod_S said:
Is your Robin still alive ?
Click to expand...
Click to collapse
Yeah it is, hbu???
oshane126(jamaican) said:
Yeah it is, hbu???
Click to expand...
Click to collapse
Well it's alive but not so good, I have like 2h SOT,
oh and about that, I was digging for a GCam that worked well with Android Pie, do you have one ?
I remember that I used before a GCam with a grey lens icon that worked very well. Do you know where I can find it ?
Jarod_S said:
Well it's alive but not so good, I have like 2h SOT,
oh and about that, I was digging for a GCam that worked well with Android Pie, do you have one ?
I remember that I used before a GCam with a grey lens icon that worked very well. Do you know where I can find it ?
Click to expand...
Click to collapse
Yeah i think i can find one
Check here https://www.celsoazevedo.com/files/android/google-camera/dev-arnova8G2/
And you can try this one;
https://f.celsoazevedo.com/file/gcamera/GoogleCamera-Pixel2Mod-Arnova8G2-V8.1.apk
oshane126(jamaican) said:
Yeah i think i can find one
Check here https://www.celsoazevedo.com/files/android/google-camera/dev-arnova8G2/
And you can try this one;
https://f.celsoazevedo.com/file/gcamera/GoogleCamera-Pixel2Mod-Arnova8G2-V8.1.apk
Click to expand...
Click to collapse
Thanks I'll try it ?