good afternoon, do you have any solution. to solve the camera error on a52s 5g? As soon as I unlocked the bootloader, the camera stopped working..
What I also discovered is that (if you have Magisk of course) you can use the MagiskHide Props Config module to force "BASIC key attestation" (Download and install the module, reboot, open terminal emulator, type "su", then type "props") by spoofing to have a different device (Galaxy A5 2017 is the one I use, others should work fine too though). That way, the camera works, even when SafetyNet fails, without having to force-close after every reboot. Hope this helps.
Pokemetti2 said:
What I also discovered is that (if you have Magisk of course) you can use the MagiskHide Props Config module to force "BASIC key attestation" (Download and install the module, reboot, open terminal emulator, type "su", then type "props") by spoofing to have a different device (Galaxy A5 2017 is the one I use, others should work fine too though). That way, the camera works, even when SafetyNet fails, without having to force-close after every reboot. Hope this helps.
Click to expand...
Click to collapse
Which firmware did you use to find this? April or May update?
bobfrantic said:
Which firmware did you use to find this? April or May update?
Click to expand...
Click to collapse
I use the latest May update I could find on Odin (A528BXXU1CVE2)
Pokemetti2 said:
I use the latest May update I could find on Odin (A528BXXU1CVE2)
Click to expand...
Click to collapse
OK, I'm going to give this a try then, thanks. btw can you provide a screenshot of your build.prop please?
bobfrantic said:
OK, I'm going to give this a try then, thanks. btw can you provide a screenshot of your build.prop please?
Click to expand...
Click to collapse
A screenshot is a bit difficult, it's really long. I'll just attach the file with a txt extension.
Pokemetti2 said:
A screenshot is a bit difficult, it's really long. I'll just attach the file with a txt extension.
Click to expand...
Click to collapse
thanks
Related
Since rooting my 3XL, I've found several apps that detect root and will no longer work. I can live without them and work around it, but it's annoying. Does anyone know if there is a way to hide my root status from these apps? I've found mentions of some xposed modules that do this, but I'm apprehensive about trying them out quite yet.
kos26 said:
Since rooting my 3XL, I've found several apps that detect root and will no longer work. I can live without them and work around it, but it's annoying. Does anyone know if there is a way to hide my root status from these apps? I've found mentions of some xposed modules that do this, but I'm apprehensive about trying them out quite yet.
Click to expand...
Click to collapse
In Magisk look for Magic Hide. Open it up and check the box next to the app. You have to be on a newer canary bild for it to work.
TonikJDK said:
In Magisk look for Magic Hide. Open it up and check the box next to the app. You have to be on a newer canary bild for it to work.
Click to expand...
Click to collapse
Thanks. I'm not sure how to tell which build I'm using, I'm using whatever was in the Root thread https://www.xda-developers.com/google-pixel-3-unlock-bootloader-root-magisk/
I'm assuming im not using the Canary build since I didn't see that module. Mind telling me how to check or update?
kos26 said:
Thanks. I'm not sure how to tell which build I'm using, I'm using whatever was in the Root thread https://www.xda-developers.com/google-pixel-3-unlock-bootloader-root-magisk/
I'm assuming im not using the Canary build since I didn't see that module. Mind telling me how to check or update?
Click to expand...
Click to collapse
You should be ok on that version. Give a try.
TonikJDK said:
You should be ok on that version. Give a try.
Click to expand...
Click to collapse
I don't see the module you referenced. There is Shellhide that says it's an alternative to Magisk Hide. In Magisk settings there is Magisk hide but it's just on or off, and was already on. So if that's it, it doesn't work for my purpose.
There are some apps that Magisk cannot hide from. This is my first Android phone that I have decided not to unlock the Bootloader on it. I am fine with stock, and don't need what root has to offer. Besides I like being able to use Android Pay and not have to play Cat and Mouse upgrading Magisk every time Android catches up to it.
kos26 said:
I don't see the module you referenced. There is Shellhide that says it's an alternative to Magisk Hide. In Magisk settings there is Magisk hide but it's just on or off, and was already on. So if that's it, it doesn't work for my purpose.
Click to expand...
Click to collapse
Yes, I meant inside Magisk. If you have the check box next to the app checked and it is still finding it you are probably out of luck. Some apps are not fixable.
You can also go in settings and hit hide Magisk manager. That sometimes helps.
TonikJDK said:
Yes, I meant inside Magisk. If you have the check box next to the app checked and it is still finding it you are probably out of luck. Some apps are not fixable.
You can also go in settings and hit hide Magisk manager. That sometimes helps.
Click to expand...
Click to collapse
Thanks for the info
Anyone able to get Viper4Android to process? I have it installed through Magisk and it works when first installed but eventually stops. Only way to get it working again is to reboot.
I think it stops when changing output forms. Instead of rebooting fully, try hitting the 3 dots on the top right of the app and hitting exit and then relaunching the app.
I tried that and force closing it. Didn't work but what seems to have fixed it was uninstalling the driver...it then asked for root permission to do that. After a restart everything is working even when changing apps. We'll see if it's permanent or not. Thanks for the reply though.
Try this: uninstall your current module, reboot, and install this apk. It's an unofficial material design 2 viper that auto generates a magisk module when you install it for your device. I got mine working properly.
Thanks, I'll try that. Been having to reboot again.
Well along with the acp and aml modules that method worked. Hopefully this sticks. Thank you for your help!
TENN3R said:
Try this: uninstall your current module, reboot, and install this apk.
Click to expand...
Click to collapse
That's what I have, and it worked at first but not any longer on Pixel 3a.
Are there other modules that should be installed, or can't be, as well?
-G
ggibby said:
That's what I have, and it worked at first but not any longer on Pixel 3a.
Are there other modules that should be installed, or can't be, as well?
Click to expand...
Click to collapse
I only know about that module, and the one from ahrion and Zackptg5 (here).
Have you tried in this module enabling the compatibility mode and reboot?
TENN3R said:
Have you tried in this module enabling the compatibility mode and reboot?
Click to expand...
Click to collapse
Compatibility mode was enabled, so I disabled it and now it seems to be working.
Thanks for the hint!
Wanted to do the old hotspot trick (net.tethering.noprovisioning=true) but the build prop won't save. Any ideas?
Also trying to load adaway in data/hosts and data/data/host fail.
But magisk modules will install and work.
Search on XDA for Tethering Enabler for Magisk. It's working for me not sure about Adaway.
AlPoo said:
Wanted to do the old hotspot trick (net.tethering.noprovisioning=true) but the build prop won't save. Any ideas?
Also trying to load adaway in data/hosts and data/data/host fail.
But magisk modules will install and work.
Click to expand...
Click to collapse
Regarding adaway, make sure you set "systemless hosts" mode in Magisk settings. Not sure of the exact name of the setting at the moment as I do not currently have Magisk installed...
I wasn't able to get /system rw which limited options on enabling tether.
Adjusting magisk for systemless hosts worked fine for me but I was never able to get tethering working on q. I went back to 9 until things smooth out a bit.
KillerVamp09 said:
Search on XDA for Tethering Enabler for Magisk. It's working for me not sure about Adaway.
Click to expand...
Click to collapse
Huh. I'll have to keep it in mind if I try to re enable tether after an OTA. I managed to find a guide that worked by setting it in terminal.
PhoenixPath said:
Regarding adaway, make sure you set "systemless hosts" mode in Magisk settings. Not sure of the exact name of the setting at the moment as I do not currently have Magisk installed...
Click to expand...
Click to collapse
Oddly enough I couldnt get any of that to work. Until I installed busy box and installed the system less host module via magisk.
Aridon said:
I wasn't able to get /system rw which limited options on enabling tether.
Adjusting magisk for systemless hosts worked fine for me but I was never able to get tethering working on q. I went back to 9 until things smooth out a bit.
Click to expand...
Click to collapse
As for tethering I got it working cherry! I can't find the exact guide I found but this is the same. Had to install busy box and whatnot but, it worked. Found this guide on XDA but this link has the same steps. Be warned though, 4 isn't "add new/custom", for me, I had to press 5 not 4. https://www.getdroidtips.com/how-to-enable-native-tethering-on-rooted-pixel-3-3xl/
Not sure what tether_dun_required 0 does. But it worked like a charm and persists after reboot now.
Thanks everybody, got it all working now. Couldn't have done it without ya!
What is the name of the system less magisk module you installed so I use the right one.
AlPoo said:
Huh. I'll have to keep it in mind if I try to re enable tether after an OTA. I managed to find a guide that worked by setting it in terminal.
Oddly enough I couldnt get any of that to work. Until I installed busy box and installed the system less host module via magisk.
As for tethering I got it working cherry! I can't find the exact guide I found but this is the same. Had to install busy box and whatnot but, it worked. Found this guide on XDA but this link has the same steps. Be warned though, 4 isn't "add new/custom", for me, I had to press 5 not 4. https://www.getdroidtips.com/how-to-enable-native-tethering-on-rooted-pixel-3-3xl/
Not sure what tether_dun_required 0 does. But it worked like a charm and persists after reboot now.
Thanks everybody, got it all working now. Couldn't have done it without ya!
Click to expand...
Click to collapse
Archangel said:
What is the name of the system less magisk module you installed so I use the right one.
Click to expand...
Click to collapse
Click the systemless option in the Magisk settings. It will install the correct module for you.
I did that is just causes a pop up that says added systemless host module. Adaway still gives me a syslink error?
sic0048 said:
Click the systemless option in the Magisk settings. It will install the correct module for you.
Click to expand...
Click to collapse
Archangel said:
I did that is just causes a pop up that says added systemless host module. Adaway still gives me a syslink error?
Click to expand...
Click to collapse
You need to reboot after that and then enable Adaway.
ctfrommn said:
You need to reboot after that and then enable Adaway.
Click to expand...
Click to collapse
This worked perfectly. Adaway is my favorite piece of software. Thank you. I had also installed busybox, based on an earlier comment. Not sure if that was necessary.
I can't seem to find that module anymore.
Does anyone have a link, or a copy?
Thanks
L
Larzzzz82 said:
I can't seem to find that module anymore.
Does anyone have a link, or a copy?
Thanks
L
Click to expand...
Click to collapse
It likely was removed from the repository due to not being updated. The thread in the Magisk forum, if said thread exists, should still exist however.
This is the one I use. I saved the file to my PC for this reason.
https://easyupload.io/dmaksp
Here it is as well post #76
Tried both. They appear to install but do not show up in the modules list.
Just to update, the adb shell command and the magisk props module got it working.
Larzzzz82 said:
Tried both. They appear to install but do not show up in the modules list.
Click to expand...
Click to collapse
I just stumbled on this thread, took a look at the module forum. The last page has a link to some other module that supposedly does the same thing, and it works with newer versions of Magisk. I didn't look at it or try it, though.
https://forum.xda-developers.com/apps/magisk/module-tethering-enabler-testers-t3476625/page15
I had it at one time... Silly me didn't back up my phone and I reset it.
No worries though. I got it working again.
Hi there,
You can find attached the patched boot image for the first stable OOS 13 firmware (IN2023 = 8 Pro European/Global version)
Steps :
Unlock the phone bootloader
Install ADB and Fastboot on your computer
Download the patched boot.img below
Reboot your phone to fastboot mode and link it to your computer
Open a terminal prompt in the directory where the boot.img is located
type in the cmd
fastboot flash boot IN2023_11_F13-Patched.img
Click to expand...
Click to collapse
and press enter
Reboot the phone
Open the magisk app, hit Install then use the recommended method
Reboot and you're rooted
Google Drive
Thanks for this. Where can you download the oos13 firmware?
MR0808 said:
Thanks for this. Where can you download the oos13 firmware?
Click to expand...
Click to collapse
The update is available through Oxygen Updater app
First thoughts on OOS 13 are really positive, smoothness is the first thing I noticed, it's day and night with OOS 12
The UI revamp is very satisfying to me
Overall, it feels more polished than OOS 12, with the sense of details in every feature/setting, and some new unique features
Thanks. Looks like I'm getting IN2025, so will have to do the patched boot.img myself.
Time to find my old notes somewhere
Is your Fingerprint Sensor working with A13? Mine not.
I assume same issues as we had with A12 and USNF
GhostRider86 said:
Is your Fingerprint Sensor working with A13? Mine not.
I assume same issues as we had with A12 and USNF
Click to expand...
Click to collapse
i kept all my magisk modules after the update which fix SafetyNet and Fingerprint issue, so i don't know
Neil_Armstrong_ said:
i kept all my magisk modules after the update which fix SafetyNet and Fingerprint issue, so i don't know
Click to expand...
Click to collapse
I keepted mine as well, SafetyNet and gPay are working, but Unlock with Fingerprint Sensor is not. No reaction to sensor at all, not able to register new Finger...
Edit: Working now. Needed to disable USNF module, no reboot, Fingerprint Sensor working, register Fingers, screen lock, test, enable USNF module, enjoy
Neil_Armstrong_ said:
The update is available through Oxygen Updater app
First thoughts on OOS 13 are really positive, smoothness is the first thing I noticed, it's day and night with OOS 12
The UI revamp is very satisfying to me
Overall, it feels more polished than OOS 12, with the sense of details in every feature/setting, and some new unique features
Click to expand...
Click to collapse
I already have the fil, but I can't install it from system update apk,
am I missing something ?
EDIT:
re-downloaded the file again from Oxygen updater, but still it fails to install nd also "verification failed" in system local update.
Edit 2:
I re MSM back to OOS11 and upgraded directly to OOS 13 F3.
Tanks you so much it worked for me.
Can we use google pay with this version rooted ?
Edit. Gpay works
Hey guys, what version of Magisk (and branch) are you using to root OOS13?
I am still on 11.0.11.11 with Magisk 23.
What is the procedure to upgrade to OOS13 from OOS11 without losing root, Magisk modules and all my data?
I tried downloading full OOS12 using Oxygen Updater app, ran Local System Upgrade, it finished normally, then installed Magisk to inactive slot (after OTA) and rebooted BUT after reboot - the system stays 11.0.11.11. And the attempt to Local System Upgdate for OOS13 fails right on start.
What am I missing?
Please help
VBBoston said:
Hey guys, what version of Magisk (and branch) are you using to root OOS13?
I am still on 11.0.11.11 with Magisk 23.
What is the procedure to upgrade to OOS13 from OOS11 without losing root, Magisk modules and all my data?
I tried downloading full OOS12 using Oxygen Updater app, ran Local System Upgrade, it finished normally, then installed Magisk to inactive slot (after OTA) and rebooted BUT after reboot - the system stays 11.0.11.11. And the attempt to Local System Upgdate for OOS13 fails right on start.
What am I missing?
Please help
Click to expand...
Click to collapse
I updated from oos 13 unrooted. Lost my root using oos12
I was able to get OOS13 installed but now need to restore root.
Could someone please share
Magisk patched boot.img for Global OOS13 (IN2025_11_F.13) for rooting?
Thank you ~
VBBoston said:
I was able to get OOS13 installed but now need to restore root.
Could someone please share
Magisk patched boot.img for Global OOS13 (IN2025_11_F.13) for rooting?
Thank you ~
Click to expand...
Click to collapse
They have already been shared here.
Thank you very much!
stell52 said:
Tanks you so much it worked for me.
Can we use google pay with this version rooted ?
Edit. Gpay works
Click to expand...
Click to collapse
I have two problems:
1. Netflix and hotstar are not working.
2. Hdfc and Axis apps are not working.
Are they working for u ? I have tried a lot of fixes but couldn't get them to work. If someone can help it would be highly appreciated
Neil_Armstrong_ said:
Hi there,
You can find attached the patched boot image for the first stable OOS 13 firmware (IN2023 = 8 Pro European/Global version)
Steps :
Unlock the phone bootloader
Install ADB and Fastboot on your computer
Download the patched boot.img below
Reboot your phone to fastboot mode and link it to your computer
Open a terminal prompt in the directory where the boot.img is located
type in the cmd
and press enter
Reboot the phone
Open the magisk app, hit Install then use the recommended method
Reboot and you're rooted
Google Drive
Click to expand...
Click to collapse
I have rooted it successfully. Everything is working except Netflix, Disney Hotstar and a few banking apps. I have tried enforcing denylist, shamiko.etc. nothing is getting them to work.
If u have any fix please let me know.
Thanks
MrBloB said:
I have two problems:
1. Netflix and hotstar are not working.
2. Hdfc and Axis apps are not working.
Are they working for u ? I have tried a lot of fixes but couldn't get them to work. If someone can help it would be highly appreciated
Click to expand...
Click to collapse
In magisk go to settings then make sure zygisk is checked and activate denylist. In the denylist check google services is check.
Then install the module universital safetynetfix v 2.3.1 by kdrag0n
To me netflix and other apps work.
In the google play store you have many apps that can check if your safetynet is verified after it. If its verified it should work
To me vanced manager do not work when i try to install youtube vanced. It says that i tried to downgrade paquet but i did not. I uninstalled every youtube upgrade. If somebody know
MrBloB said:
I have rooted it successfully. Everything is working except Netflix, Disney Hotstar and a few banking apps. I have tried enforcing denylist, shamiko.etc. nothing is getting them to work.
If u have any fix please let me know.
Thanks
Click to expand...
Click to collapse
Flash Universal SafetyNet module in magisk (kdrag0n) and Magisk Bootloop Protector (just in case)
Check your status after a reboot with YASNAC from Play Store
Force the Magisk DenyList, and when configuring it, develop the apps and check all the tick boxes manually (to be sure)
Uninstall Netflix and install the latest .apk from APKMirror, can't help as other app (banking too) works fine
Isn't vanced dead ?
YouTube Premium Argentina is very affordable fyi ....
stell52 said:
To me vanced manager do not work when i try to install youtube vanced. It says that i tried to downgrade paquet but i did not. I uninstalled every youtube upgrade. If somebody know
Click to expand...
Click to collapse
stell52 said:
In magisk go to settings then make sure zygisk is checked and activate denylist. In the denylist check google services is check.
Then install the module universital safetynetfix v 2.3.1 by kdrag0n
To me netflix and other apps work.
In the google play store you have many apps that can check if your safetynet is verified after it. If its verified it should work
Click to expand...
Click to collapse
Yes i have done this. Tried shamiko as well. M passing safetynet checks, still it doesnt work.