Related
Since there doesn't appear to be any full stock firmwares for the January Patch around
Retail ASIA, DUAL SIM variant
Does not contain supersu or anything else
How it was made:
Flashed stock firmware LUX_RETASIA_DS_6.0.1_MPD24.107-70-1_cid7_subsidy-DEFAULT_CFC.info and then sideloaded the OTA package MPDS24.107-70-1-5
The only thing i have changed is the bootlogo (removed the pesky bootloader unlocked screen), but i am unsure if that's even in the backup contents
How to install:
I suggest grabbing a LUX_RETASIA_DS_6.0.1_MPD24.107-70-1 firmware and flashing that first, just so you don't get boot or modem issues
(you can get it here https://firmware.center/firmware/Motorola/Moto X Play/Stock/XT1562/)
(instructions on how to flash here at the bottom https://github.com/motoxplay/stock)
You need a TWRP recovery flashed (https://forum.xda-developers.com/moto-x-play/orig-development/recovery-twrp-2-8-7-0-t3194656)
Extract, put the folder on your device next to your own TWRP backups, reboot recovery, restore from it.
Download:
https://mega.nz/#!Bxk31KiR!xdVWV1M-06xfatAUetjeY94p1qArhiSefa4ezj4431c
AtomicStryker said:
Since there doesn't appear to be any full stock firmwares for the January Patch around
Retail ASIA, DUAL SIM variant
Does not contain supersu or anything else
How it was made:
Flashed stock firmware LUX_RETASIA_DS_6.0.1_MPD24.107-70-1_cid7_subsidy-DEFAULT_CFC.info and then sideloaded the OTA package MPDS24.107-70-1-5
The only thing i have changed is the bootlogo (removed the pesky bootloader unlocked screen), but i am unsure if that's even in the backup contents
How to install:
I suggest grabbing a LUX_RETASIA_DS_6.0.1_MPD24.107-70-1 firmware and flashing that first, just so you don't get boot or modem issues
(you can get it here https://firmware.center/firmware/Motorola/Moto X Play/Stock/XT1562/)
(instructions on how to flash here at the bottom https://github.com/motoxplay/stock)
You need a TWRP recovery flashed (https://forum.xda-developers.com/moto-x-play/orig-development/recovery-twrp-2-8-7-0-t3194656)
Extract, put the folder on your device next to your own TWRP backups, reboot recovery, restore from it.
Download:
https://mega.nz/#!Bxk31KiR!xdVWV1M-06xfatAUetjeY94p1qArhiSefa4ezj4431c
Click to expand...
Click to collapse
Is it possible to get the MPDS24.107-70-1-5 firmware to flash since, I tried flashing the MPD24.107-70 firmware and it is just throwing error left right and center, invalid signed image, preflash validation failed. I'm really stuck in what should be my next step
Presumably, getting the correct firmware for your device. I never had any issues and i re-flashed a single slot device to dual slot...
Not +ve response
siddharthnair96 said:
Is it possible to get the MPDS24.107-70-1-5 firmware to flash since, I tried flashing the MPD24.107-70 firmware and it is just throwing error left right and center, invalid signed image, preflash validation failed. I'm really stuck in what should be my next step
Click to expand...
Click to collapse
The method you've mentioned above. It's quiet helpful. But it's not success in my device.
I'm using Moto X play XT1562, dual sim and Location : India. Stock Rom with : 6.0.1 Marshmallow. Help me to flash with stock Rom ASAP Dude.
RohithAbi said:
The method you've mentioned above. It's quiet helpful. But it's not success in my device.
I'm using Moto X play XT1562, dual sim and Location : India. Stock Rom with : 6.0.1 Marshmallow. Help me to flash with stock Rom ASAP Dude.
Click to expand...
Click to collapse
You can download all the tools and stock ROM (MM) from my google drive link below. I have included the steps and commands to be executed.
ADB Drivers, USB Drivers, steps and commands : https://drive.google.com/open?id=0B5a7fC9ekt7seWF5SkVMNUIwTmc
Stock Rom (adb flash file) : https://drive.google.com/open?id=0B5a7fC9ekt7sVHF4VFdEdUlQcms
Can I get the modem of mpds24? Thanks
ZETROzky said:
Can I get the modem of mpds24? Thanks
Click to expand...
Click to collapse
Sorry, I don't have it..
Stock Recovery needed
Shibin_1985 said:
You can download all the tools and stock ROM (MM) from my google drive link below. I have included the steps and commands to be executed.
ADB Drivers, USB Drivers, steps and commands : https://drive.google.com/open?id=0B5a7fC9ekt7seWF5SkVMNUIwTmc
Stock Rom (adb flash file) : https://drive.google.com/open?id=0B5a7fC9ekt7sVHF4VFdEdUlQcms
Click to expand...
Click to collapse
Can you please upload just the recovery.img file for Moto X Play Marshmallow 6.0.1? I need the stock recovery image in order to get the Nougat OTA update.
Can you post the stock `recovery.img` as a separate file?
AtomicStryker said:
Since there doesn't appear to be any full stock firmwares for the January Patch around
Retail ASIA, DUAL SIM variant
Does not contain supersu or anything else
Click to expand...
Click to collapse
---------- Post added at 10:46 AM ---------- Previous post was at 10:39 AM ----------
Shibin_1985 said:
You can download all the tools and stock ROM (MM) from my google drive link below. I have included the steps and commands to be executed.
ADB Drivers, USB Drivers, steps and commands : https://drive.google.com/open?id=0B5a7fC9ekt7seWF5SkVMNUIwTmc
Stock Rom (adb flash file) : https://drive.google.com/open?id=0B5a7fC9ekt7sVHF4VFdEdUlQcms
Click to expand...
Click to collapse
Is the build number MPDS24.107.70.1-5?
If so can you also post the stock `recovery.img` as a separate file? Thanks
Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me
Salim0900 said:
Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me
Click to expand...
Click to collapse
Shows you which error?
Did you try to install it via local update?
Anyway, your best bet is to install TWRP and flash the CN ROM through TWRP.
Alternatively, use miflash tool in the unofficial unbrick tool to flash the CN firmware via edl mode
Nubia package error
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good
Salim0900 said:
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good
Click to expand...
Click to collapse
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best
zayidhs said:
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best
Click to expand...
Click to collapse
Sorry brother but I can't see any link
Salim0900 said:
Sorry brother but I can't see any link
Click to expand...
Click to collapse
http://romdownload.nubia.com/红魔5G/V6.23/NX659J-update.zip
There you are. Its the 6.23 version of the cn rom
This directs to the 5s version but both the 5s and 5g versions of this rom are identical. ( Md5 checksum proves its the same file)
Flash from recovery. Or through TWRP
Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device
Salim0900 said:
Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device
Click to expand...
Click to collapse
Otg refers to a external usb device you connect to the phone. If you have the update.zip on the root of the internal memory it should show up.
If it does not. You should use the root without unlocking bootloader tutorial to install TWRP. The zip will flash from there with no problems.
I am not responsible for any brick.
I tested this guide myself and decided to share it.
Make a backup before this guide because you will lose your data!
The unlock method has been updated and now you can unlock the bootloader more easily without the risk of bricking after an OTA and without changing the bootloader.
Now you can safely unlock the bootloader using mtkclient.
Link: https://github.com/bkerler/mtkclient
TWRP can be installed via mtkclient or manually from rooted Android.
TWRP Download link: https://github.com/XRedCubeX/twrp_meizu_m5c/releases
IF you unlocked the bootloader with the old method you can follow these steps:
1) Download the attached package.
2) Download OTA zip from flyme, link: http://www.flymeos.com/firmwarelist?modelId=70&type=1
3) Download the latest version of SP Flash Tool.
4) Download MTKClient and follow the instructions to install it.
5) Power off the phone and keep unplugged it from PC.
6) Open SP Flash Tool, select the downloaded package and select all partitions, then press the download button, don't plug phone for now.
7) Boot to recovery with vol +, plug the phone on PC, depending on recovery, TWRP or stock, use adb sideload or put update.zip in internal memory and install the zip.
8) Let the phone reboot or reboot it manually.
9) Now start the flash from SP Flash tool automatically, let it finish.
10) After the flash, unplug the phone and reboot into recovery.
11) Paste the update.zip in the phone and flash it.
12) After reboot, let your phone reboot into android and power off.
13) You can follow the guide to unlock bootloader with mtkclient.
FAQ:
A) But will I lose the data with this guide?
Yes.
Make sure to back up your data in any case!
B) But this guide is a bit different than usual, where is "fastboot oem unlock"? Or "fastboot flashing unlock"?
Meizu has not implemented an unlock command and in this case to unlock the bootloader we have to use a tool that makes us change the unlock status.
C) Are there Custom ROMs?
There is only one custom ROM for this device, the Lineage OS 14 but I advise against using it because it has a bit of a bug but I haven't had more time to work on it yet.
D) But wasn't the guide different?
It has been updated with a better method with more advantages.
E) My device is in Hard Brick! How can I solve?
There are various types of Hard Brick and it depends from situation to situation.
F) I have installed Lineage OS 14 but I am not satisfied, I want to go back to Flyme!
Flash update.zip from official website.
G) Can I relock the bootloader?
From MTKClient readme:
for relocking use:
python mtk da seccfg lock
Click to expand...
Click to collapse
H) TWRP? I am interested in Device Tree, where is the link?
Here: https://github.com/XRedCubeX/twrp_meizu_m5c
I) I have a Meizu A5 (Chinese M5c) will it work on it?
I can't assure you anything but it could work, the only way to be sure is to test on a Meizu A5.
J) Can I flash twrp from fastboot?
Fastboot refuses to flash partitions, strangely, I don't know if downgrade or anything changes the situation but for now I was able to flash it with mtkclient.
I can remove the FlameOs from the Meizu M5c and install a custom rom. So far I haven't found any rom for this device?
Mortaux said:
I can remove the FlameOs from the Meizu M5c and install a custom rom. So far I haven't found any rom for this device?
Click to expand...
Click to collapse
Im working on a Lineage OS 14 for this device.
I tried the procedure and it failed. Apparently it just formatted it but couldn't finish the process, returned an error. Then I tried to reinstall the stock ROM and it generated the error S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004). Now my phone is off and I can't turn it on anymore.
I tried this method but it didn't work:
HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES
HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES FIX FOR SP FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) AND (2004) Follow the following steps: 1. Get SP flash tools (Latest version) 2. Download your...
forum.xda-developers.com
I know it's my responsibility, but I don't know what else to do. Could someone please help me?
thiagosousa777 said:
I tried the procedure and it failed. Apparently it just formatted it but couldn't finish the process, returned an error. Then I tried to reinstall the stock ROM and it generated the error S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004). Now my phone is off and I can't turn it on anymore.
I tried this method but it didn't work:
HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES
HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES FIX FOR SP FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) AND (2004) Follow the following steps: 1. Get SP flash tools (Latest version) 2. Download your...
forum.xda-developers.com
I know it's my responsibility, but I don't know what else to do. Could someone please help me?
Click to expand...
Click to collapse
You unplugged the device while it was formatting, consequently it no longer has the bootloader, that error means that the device needs an authorization file that unfortunately only meizu has, shortly if I can try to release a tool to unbrick it in cases similar to these
XRed_CubeX said:
You unplugged the device while it was formatting, consequently it no longer has the bootloader, that error means that the device needs an authorization file that unfortunately only meizu has, shortly if I can try to release a tool to unbrick it in cases similar to these
Click to expand...
Click to collapse
It's a shame .. I hope you can really release this tool, so I can revive my phone. Thank you.
You can make a video on youtube showing the procedure on the Meizu M5c. Installing Twrp and LineageOs 14? Just to make sure it works
Mortaux said:
You can make a video on youtube showing the procedure on the Meizu M5c. Installing Twrp and LineageOs 14? Just to make sure it works
Click to expand...
Click to collapse
For now I can't make the video because I can't release the Lineage because I'm fixing some bugs and I want to do some checks before releasing it publicly
thiagosousa777 said:
It's a shame .. I hope you can really release this tool, so I can revive my phone. Thank you.
Click to expand...
Click to collapse
Ok i found a working guide, tried on my M5c and it works:
Search on YouTube: flash mtk without da ,
You will find a video called, just exactly as I write here: "How to flash MTK secure boot devices without a custom DA" and follow the video tutorial for unbrick your device.
P.S:Obviously when the guide ends you flash the ROM from SP flash tool as you normally would
XRed_CubeX said:
Ok i found a working guide, tried on my M5c and it works:
Search on YouTube: flash mtk without da ,
You will find a video called, just exactly as I write here: "How to flash MTK secure boot devices without a custom DA" and follow the video tutorial for unbrick your device.
P.S:Obviously when the guide ends you flash the ROM from SP flash tool as you normally would
Click to expand...
Click to collapse
I'll try that, thanks a lot!
thiagosousa777 said:
I'll try that, thanks a lot!
Click to expand...
Click to collapse
Did you finally manage to fix the device?
Were you able to get on with the guide?
XRed_CubeX said:
Did you finally manage to fix the device?
Were you able to get on with the guide?
Click to expand...
Click to collapse
I haven't had time to do it yet. When I have time I will follow the tutorial and tell you if it worked.
thiagosousa777 said:
I haven't had time to do it yet. When I have time I will follow the tutorial and tell you if it worked.
Click to expand...
Click to collapse
Ok good luck
XRed_CubeX said:
Ok good luck
Click to expand...
Click to collapse
XRed_CubeX, I followed the tutorial from start to finish. I used the SP Flash Tool to install the M5c stock ROM, the ROM was flashed 100%, but after disconnecting the USB cable the phone did not turn on.
thiagosousa777 said:
XRed_CubeX, I followed the tutorial from start to finish. I used the SP Flash Tool to install the M5c stock ROM, the ROM was flashed 100%, but after disconnecting the USB cable the phone did not turn on.
Click to expand...
Click to collapse
Have you flashed the Stock ROM or the Engineering ROM? I remind you that even if you have flashed the eng rom only once previously, you can no longer return to the flyme bootloader so use the normal stock ROM but you will have to flash the Engineering rom
XRed_CubeX said:
Have you flashed the Stock ROM or the Engineering ROM? I remind you that even if you have flashed the eng rom only once previously, you can no longer return to the flyme bootloader so use the normal stock ROM but you will have to flash the Engineering rom
Click to expand...
Click to collapse
Well, I flashed the stock ROM a second time, using the Firmware Upgrade option, and it worked. My phone turned on and I'm in the initial setup screen.
By the way, this Engineering ROM is the ROM you shared above? Do you think it is stable enough to be used? Maybe another day I'll install it, with care to not do anything wrong again
thiagosousa777 said:
Well, I flashed the stock ROM a second time, using the Firmware Upgrade option, and it worked. My phone turned on and I'm in the initial setup screen.
By the way, this Engineering ROM is the ROM you shared above? Do you think it is stable enough to be used? Maybe another day I'll install it, with care to not do anything wrong again
Click to expand...
Click to collapse
Yes, the ROM in this thread is ROM engineering, about the stability I can't tell you why I haven't tested it, the main purpose FOR ME was to get the bootloader unlock with this ROM, if you want to switch to ROM engineering you CAN install the flyme after installed the Engineering ROM but you must always modify the OTA zip so that some partitions do not flash but if you are interested I will talk about it in more detail and maybe I will give you a hand to flash flyme safely on bootloader engineering
XRed_CubeX said:
Yes, the ROM in this thread is ROM engineering, about the stability I can't tell you why I haven't tested it, the main purpose FOR ME was to get the bootloader unlock with this ROM, if you want to switch to ROM engineering you CAN install the flyme after installed the Engineering ROM but you must always modify the OTA zip so that some partitions do not flash but if you are interested I will talk about it in more detail and maybe I will give you a hand to flash flyme safely on bootloader engineering
Click to expand...
Click to collapse
Actually, the ROM I installed with SP Flash Tools was not the update.zip from the official Flyme OS website. I downloaded the stock rom from needrom.
I have done this several times before.
But now, strangely I can no longer update to the latest version. The version I'm running is Flyme 6.0.2.0G. I tried to download the update.zip file and install it manually by clicking on it, and it appeared "corrupted file". I also tried to use the Update application and "network error" appeared. But everything else is working perfectly.
XRed_CubeX said:
if you are interested I will talk about it in more detail and maybe I will give you a hand to flash flyme safely on bootloader engineering
Click to expand...
Click to collapse
I would like to know how to install the latest version of Flyme OS via TWRP. If you can tell how to do this..
XRed_CubeX said:
can't release the Lineage because I'm fixing some bugs and I want to do some checks before releasing it publicly
Click to expand...
Click to collapse
Are you working on a custom Lineage OS ROM for this device? I'm interested, when you can publish it.. Do you have a prediction of when you will be able to release that ROM?
thiagosousa777 said:
I would like to know how to install the latest version of Flyme OS via TWRP. If you can tell how to do this..
Are you working on a custom Lineage OS ROM for this device? I'm interested, when you can publish it.. Do you have a prediction of when you will be able to release that ROM?
Click to expand...
Click to collapse
Ok, I'll explain in detail how it works: In the guide you will have read that you cannot return to the flyme using the stock rom or an unmodified OTA. This is a tip because once you flash the Engineering ROM, the engineering bootloader (which is essential for unlocking) will also be flashed, but the problem is that if you flash the stock bootloader (the flyme one, the one you surely have when you get the phone), the device for a reason unknown to me, probably the Engineering ROM modifies something in the device (?) and then goes into brick if you try to return to the flyme bootloader. To flash an OTA flyme on TWRP, you must first have some precautions: you must take the OTA on your computer (or a file explorer capable of editing zip files) and remove the following files: lk.bin preloader.bin (it will have a name longer but you still have to remove that) and tz.bin / trustzone.bin. Done like this, now the OTA becomes safe to install, you install it from TWRP, at the end of the flash it will give you an error but it is because it does not find the files we have removed but we can safely ignore it because it will have successfully installed the flyme on the device.
Regarding lineage: I'm still working on it a bit and gradually I'm discovering bugs. I already warn you that the camera will not work in the Lineage, I have tried in every way to try to make it work but it does not want to go, I have asked for help everywhere but no one has been able to answer so I do not know what to do, for the rest I want to keep a little longer the ROM under test to fix the remaining bugs
Can we root Oppo F17 Pro which comes with color OS 7 bootloader locked and fastboot disabled. SP Flash tool is not reading the scatter file that was extracted from stock rom (.ozip file), so I could flash the patched boot.img.
Anyone any luck rooting Oppo F17 Pro.
You can use TWRP and super user.
Copy SU on Oppo mobile.
Start mobile in recovery mode.
Use TWRP to install SU on mobile.
Restart mobile.
I can go to recovery mode but Fastboot is disabled by Oppo and boot loader as well locked. Is there any other way I can flash TWRP on the device without Fastboot? I am very new to this stuff trying to learn more
1. Is it possible to modify the original "StockRom" file (ozip) by replacing the patch_boot.img file which was able to generate using Magisk. It says it keep the signature unchanged so hoping there won't be signature issue.
2. I was able to extract the Stock Rom (ozip file) using python script but the scatter file that I found in that is not working in SP Flash Tool so not able to flash the boot.img. Is there a way we can find the working scatter file? I tried using MTK Droid tool to generate scatter but it doesn’t recognize the device.
3. Other option that I was thinking was after replacing the original boot.img with patched boot.img in extracted zip file is there a way we can convert it back to ozip file and the using the stock recovery we can flash the rom.
On the latest fw enable developer options and there you will see "unlock bootloader" option.
HI,
did you found "deep test apk" belonging to your phone in official coloros forum?
if not, this phone may not support bootloader unlock.
p.s. mine is OPPO R17 Pro, and it has "deep test apk"
my oppo f17 is fully locked and password protected. i dont remember the password.
cant do the hard reset it also requires password. is there any way i can unlock or flash my phone???
caihuach said:
HI,
did you found "deep test apk" belonging to your phone in official coloros forum?
if not, this phone may not support bootloader unlock.
p.s. mine is OPPO R17 Pro, and it has "deep test apk"
Click to expand...
Click to collapse
Im download deep test apk but i have a problem "app not installed" how i solve it in my oppo f17pro
well you may ask supports in your forum, cuz my phone is explicitly supported and meets no problem ...
caihuach said:
well you may ask supports in your forum, cuz my phone is explicitly supported and meets no problem ...
Click to expand...
Click to collapse
I want to root my phone but fastboot mod is disabled how i root my phone oppo f17pro
Is it possible to install lineage os in my Oppo F17 Pro ? Tell full steps specific to this phone model please
Trying to root my device(wanted to install PostmarketOS) without twrp recovery image installation(link), since Im unable to install twrp custom recovery image.
I have searched a lot and unable to find Stock rom for the build 9.1.0.168(C675E7R1P1). All i could find is 9.1.0.140 as the closest possible one. Huawei firmware site is down(from india, tried using vpn, still down).
My questions are,
1. Can any one provide me the Stock ROM for this build ?
2. Will it be okay if i use 9.1.0.140's boot.img and follow the steps mentioned in the link , while my devices build is 9.1.0.168?
3. Will that brick my device if i do so (by mismatched firmware's boot image)? Or is it possible to extract currently installed ROM from my own device ? **(without root, since im unable to install twrp as mentioned earlier)
Device Details:
Device : Honor 7x (BND-AL10)
Android Version : 9
EMUI Version : 9.1.0
Build number : 9.1.0.168(C675E7R1P1)