Related
I read about screem gap but i was unsure what exactly was meant. I just took a closer look and found out that there is a tiny gap between my screen and phone on top in which dirt fills in and it pisses me off. I havent dropped my screen once and if i push the top left part of my phone i can hear a sort of "click".does that make my phone faulty? Im really annoyed vy the dirt that fills in... Apart from rhat phone has no problems.
shadehh said:
I read about screem gap but i was unsure what exactly was meant. I just took a closer look and found out that there is a tiny gap between my screen and phone on top in which dirt fills in and it pisses me off. I havent dropped my screen once and if i push the top left part of my phone i can hear a sort of "click".does that make my phone faulty? Im really annoyed vy the dirt that fills in... Apart from rhat phone has no problems.
Click to expand...
Click to collapse
send it back. that is what i am doing. left hand side of the phone between the screen and the plastic you can see dust getting inside there to. plus if you press the left hand side tad hard you can hear it creaking as well. i called HTC to see if they could replace it for me straight away without sending it for repairs..waiting for an outcome tomorrow...if they say no i will just send it for repairs and hope they find the problem and either fix it or replace it then...i know it will drag for a week but at least that way you know one way or the other it will get fixed...
i was going to say if it does not bug you then leave it..but you sound just like me that even though the phone works fine it will bug you cause you know it is there
should i go to my provider or directly cpntact htc? And just to understand it better. Gaps are not supposed to be there, am i right?
shadehh said:
should i go to my provider or directly cpntact htc? And just to understand it better. Gaps are not supposed to be there, am i right?
Click to expand...
Click to collapse
Dont replace it as you have no other problems. Go to HTC repair center and just fix it. If you replace there may be a chance of getting more faultier one.
Sent from my HTC One X using Tapatalk 2
Living in austria, where to check for such a repair center?
forumhookersdotcom said:
Dont replace it as you have no other problems. Go to HTC repair center and just fix it. If you replace there may be a chance of getting more faultier one.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
have to agree with that as well. but at the same time new batch of phones get send out so you never know. just go to HTC site and do a locator for your country my friend
shadehh said:
Living in austria, where to check for such a repair center?
Click to expand...
Click to collapse
Have a look at this . May be useful
http://www.htc-floorsystems.com/en/HTCGlobal/HTCOffices/HTCGermany/Contacts.aspx
Sent from my HTC One X using Tapatalk 2
Thank you all and especially goku80 for fast replies. Gotta love xda community
shadehh said:
Thank you all and especially goku80 for fast replies. Gotta love xda community
Click to expand...
Click to collapse
no problem my friend. i feel your pain and know what you are going through. i will keep you updated with my one and what happens..keep me updated with yours as well
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Eddzz!! said:
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Click to expand...
Click to collapse
oh really..seriously i wonder if you had a gap how would you feel about your perfect phone? everyone to their opinion. i can live with it no problem..but the fact knowing that it is there will bug the **** out of me hence why i am going through what i am right now
I had a creaky SGS for 2 years. I still have it now and it works and looks as good as it did on day one.
Eddzz!! said:
I had a creaky SGS for 2 years. I still have it now and it works and looks as good as it did on day one.
Click to expand...
Click to collapse
well i will see what they say tomorrow..if they replace it for me all is good..but if they do not and want to fix it ehh i kinda have to think twice being without my phone for a week
Ive heard that the one x was made in 2 different countrys taiwan and china... china being the worst built ones buttt I must have a really faulty dhd. I've had it for 10 months now and my screen moves, doesn't fit right on the phone as there should be a lip round it but isn't my speaker isn't straight so is sloping. Looks like the cnc machine hasn't cut it right. Power button is really recessed too far in..... I think a little sqweek is nothing to really worry about if the screen falls out then ya I'd send it back.
Sent from my Desire HD using XDA
htcmodteam said:
Ive heard that the one x was made in 2 different countrys taiwan and china... china being the worst built ones buttt I must have a really faulty dhd. I've had it for 10 months now and my screen moves, doesn't fit right on the phone as there should be a lip round it but isn't my speaker isn't straight so is sloping. Looks like the cnc machine hasn't cut it right. Power button is really recessed too far in..... I think a little sqweek is nothing to really worry about if the screen falls out then ya I'd send it back.
Sent from my Desire HD using XDA
Click to expand...
Click to collapse
well that is what worries me about the whole damn thing..if it gets to hot to soon and in two months down the line the screen actually does fall out
TBH ive just checked mine and it does have a slight gap with lint building up already (bare in mind ive had this phone 2 days) Also have the yellow blotch on the screen AND a dead pixel. This is by far the best phone ive ever owned...But my word these little niggles are grating on my moobs! Ive never had to send a phone off to a repair centre before but im not really willing to put up with the problems the phone has (however ridiculously small they seem to some ) You expect some software issues in an early batch, but dead pixels, discoloured screens, gaps occuring out of nowhere between the screen, its a bit much really! Im gunna have to get it sent off soon i think, gutted!
how do you clean the dust build up?
abuds87 said:
how do you clean the dust build up?
Click to expand...
Click to collapse
Use a screwdriver.
P.S. http://forum.xda-developers.com/showthread.php?p=27066789
abuds87 said:
how do you clean the dust build up?
Click to expand...
Click to collapse
Vacuum cleaner with a soft piece of cloth on the vacuum tube to avoid scratches.
Just another option
To the OP: May I ask what serial your phone has?
Cheers.
Eddzz!! said:
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Click to expand...
Click to collapse
Do you even realize how big 1mm is?!!!! Get a ruler and see please....
I doubt even a blind person could enjoy a phone with a gap big as that. You would not just see this, but also feel.
I have a gap that's about 0,1-2 mm big (measuring with paper, which is about that in average I think 0,1 till 0,3 I think but also not sure) and its around the whole screen on both sides of the ring.
Ugh...1mm...
But seriously guys, how big are the gaps it makes you return it?
I mean should I return it with 0,1 mm ? (maybe less) seen a bigger gap on SGS 2.
I got my note 4 days ago. At first everything was ok, but yesterday I noticed my device is terribly creaking. Almost every time I touch the back it sounds like the plastic would break a little bit (Although I don't think it would actually break).
Do you have the same issues? Or should I sent it back and get a new one, since it's really annoying me...?
Thank you )
Nope.
Gasaraki- said:
Nope.
Click to expand...
Click to collapse
This ^
ArticFox918 said:
This ^
Click to expand...
Click to collapse
This x2.
yanni_puffin said:
I got my note 4 days ago. At first everything was ok, but yesterday I noticed my device is terribly creaking. Almost every time I touch the back it sounds like the plastic would break a little bit (Although I don't think it would actually break).
Do you have the same issues? Or should I sent it back and get a new one, since it's really annoying me...?
Thank you )
Click to expand...
Click to collapse
Mine creaks a little in the bottom right corner. Everything else is fine. I think it's the plastic back giving a bit. I had this on the Nexus 10 as well.
Creaking is for Hollween not for my Tablet!
yanni_puffin said:
I got my note 4 days ago. At first everything was ok, but yesterday I noticed my device is terribly creaking. Almost every time I touch the back it sounds like the plastic would break a little bit (Although I don't think it would actually break).
Do you have the same issues? Or should I sent it back and get a new one, since it's really annoying me...?
Thank you )
Click to expand...
Click to collapse
Yes, When I held the tablet with my left hand to touch the screen with my right it creaked like a rock band with bad music! Geeish.....the silver chrome or whatever the material is wasn't tight and it just bend. I returned it right away. I really didn't want to return it. However, I paid full price and not second hand money so I expect the performance to be right, that means no noise. When listening to music or watching a movie it seems as if someone was moving around and that can be pretty annoying. I tried holding it different ways with no change. So back it went. Let Samsung sell. This I know imagine you trying to sell it to the next person, what do you think they might say and how much will the value go down?
Doc
yanni_puffin said:
I got my note 4 days ago. At first everything was ok, but yesterday I noticed my device is terribly creaking. Almost every time I touch the back it sounds like the plastic would break a little bit (Although I don't think it would actually break).
Do you have the same issues? Or should I sent it back and get a new one, since it's really annoying me...?
Thank you )
Click to expand...
Click to collapse
Yes, As soon as I opened the package, I noticed the bottom right hand corner was creaking an popping. It is not like I was looking for it. That made me investigate if the rest of the trim was doing the same. If you put your mind into into it, you can get some creaking from other ends of the trim but nothing like the bottom right hand corner. Every time I pick it up, it is annoying me so much that I feel I should take it back. I am not sure the guys at PCWorld would accept this as a reason for full money back or replacement claim. I do like the tablet, but do not want a noisy plastic in my hands.
Is this enough of a reason to ask for a replacement?
kashbg said:
Yes, As soon as I opened the package, I noticed the bottom right hand corner was creaking an popping. It is not like I was looking for it. That made me investigate if the rest of the trim was doing the same. If you put your mind into into it, you can get some creaking from other ends of the trim but nothing like the bottom right hand corner. Every time I pick it up, it is annoying me so much that I feel I should take it back. I am not sure the guys at PCWorld would accept this as a reason for full money back or replacement claim. I do like the tablet, but do not want a noisy plastic in my hands.
Is this enough of a reason to ask for a replacement?
Click to expand...
Click to collapse
Sadly I dont think it is (pure guess so dont take my word for it) BUT I can 100% say that your Tablet will have a little bit of lightbleed along the bottom and sides....this alone is a good enough reason for them to accept and exchange - Good luck.
Geordie Affy said:
Sadly I dont think it is (pure guess so dont take my word for it) BUT I can 100% say that your Tablet will have a little bit of lightbleed along the bottom and sides....this alone is a good enough reason for them to accept and exchange - Good luck.
Click to expand...
Click to collapse
Hi,
Could you please elaborate on the light bleed issue. How do you determine if you have a light bleed and what is the significance of it.
Regards,
kashbg said:
Hi,
Could you please elaborate on the light bleed issue. How do you determine if you have a light bleed and what is the significance of it.
Regards,
Click to expand...
Click to collapse
Put screen britghness to 100% and open this http://www.net-tracker.net/android/wp-content/uploads/2011/05/black_bg_1024x768.png, make sure it covers the entire screen inc notifications part and then switch off your lights in your room and you will then see light bleed, Its nothing major and common on LCD'S but it is a valid reason for a return/exchange.
I had lightbleeding on my first note but I found it to be acceptable however on my 2nd tablet I found the bleeding to be excessive and off putting so I got a refund from John Lewis,
Anyways this thread should give you an idea too - best of luck :good: http://forum.xda-developers.com/showthread.php?t=2554094
Geordie Affy said:
Put screen britghness to 100% and open this http://www.net-tracker.net/android/wp-content/uploads/2011/05/black_bg_1024x768.png, make sure it covers the entire screen inc notifications part and then switch off your lights in your room and you will then see light bleed, Its nothing major and common on LCD'S but it is a valid reason for a return/exchange.
I had lightbleeding on my first note but I found it to be acceptable however on my 2nd tablet I found the bleeding to be excessive and off putting so I got a refund from John Lewis,
Anyways this thread should give you an idea too - best of luck :good: http://forum.xda-developers.com/showthread.php?t=2554094
Click to expand...
Click to collapse
Thanks,
Nope, no creaking and barely any noticeable light bleed (Just 2 spots on the bottom i have to tilt to see)
Eric214 said:
Nope, no creaking and barely any noticeable light bleed (Just 2 spots on the bottom i have to tilt to see)
Click to expand...
Click to collapse
mine creaking along left side
funfun99999 said:
mine creaking along left side
Click to expand...
Click to collapse
same here
Got mine 2 weeks ago, and it sounds like a bowl of snap, crackel, and pop, sitting on bubble wrap.
If i look at it wrong, it makes noises. I might take it back and have them look at it... see if that warrants an exchange.
Sent from my freekin huge Note 10.1 ?
Eric214 said:
Nope, no creaking and barely any noticeable light bleed (Just 2 spots on the bottom i have to tilt to see)
Click to expand...
Click to collapse
If your one is not creaking then this definitely should be a rightful exchange claim for all those unfortunate to pick up badly put together tablets.
I am even considering getting my money back and going the Apple way. Excellent build quality, and I know that because I got some for the kids.
yeah maybe idk. Sammy is also known for build issues lately so you have to really inspect before you take home. The Note 3 home button is all wonky and wobbly on a lot of units.
Eric214 said:
yeah maybe idk.
Click to expand...
Click to collapse
Sorry for the question, but what is "idk" in your post?
Having a creaking case, would that get worse in terms of speading all around the tablet's trim?
Any experiences but no guesses please!
kashbg said:
Sorry for the question, but what is "idk" in your post?
Having a creaking case, would that get worse in terms of speading all around the tablet's trim?
Any experiences but no guesses please!
Click to expand...
Click to collapse
"IDK" means "I Dont Know".
I guess if the creaking was coming from say a loose glass to the digitizer i think it could be something that spreads. Since if the glass isn't glued down well enough i could see slight dust getting in there and causing more separation over time. I doubt this is the case as you'd see bubbling at the edges if that was happening.
Hi, I just got the phone yesterday and right away I noticed that the left side of the aluminum framing is a little off?
It's hard to notice but if everybody can please take a moment and look at the left side, where the magnetic charging port, does that section tend to extrude a little more than the rest of the frame? Compare that part to the port flaps on top from an angle and you should see that the charging port section is extruding a little more ?
Thanks for your time and replies.
Sent from my iPhone using Tapatalk
hmm, 50 views and nobody replied, does that mean nobody is having the same problem? just a defective unit ?
There is in other z1c devices too. Not all. Don't worry, I don't think it is a defect. Everything works as it should including magnetic charger and water resistance!
So in some devices, they aluminum frames are perfectly aligned while others are not and it's not considered a defect? I don't quite follow the logic here. Anybody else has a slight misalignment? It's not major but on an angle you can tell that the Magnetic charging port is slightly different compared to the flaps on top.
sachilleas said:
There is in other z1c devices too. Not all. Don't worry, I don't think it is a defect. Everything works as it should including magnetic charger and water resistance!
Click to expand...
Click to collapse
Lusterboi said:
[...]It's hard to notice but if [...]
Click to expand...
Click to collapse
A picture equals 1000 words .. why not you take a picture with that iPhone you have and post it here so I can actually understand what misalignment are you talking about ?
Lusterboi said:
So in some devices, they aluminum frames are perfectly aligned while others are not and it's not considered a defect? I don't quite follow the logic here. Anybody else has a slight misalignment? It's not major but on an angle you can tell that the Magnetic charging port is slightly different compared to the flaps on top.
Click to expand...
Click to collapse
I'm sorry if my answer didn't please you but behaving that way doesn't help. Not only you didn't even thank me for my answer but you are also aggressive questioning my logic. Bye bye.
attached you will find a photo example. its hard to tell from the picture i posted but at least you'll know where to look.
ro_explorer said:
A picture equals 1000 words .. why not you take a picture with that iPhone you have and post it here so I can actually understand what misalignment are you talking about ?
Click to expand...
Click to collapse
sachilleas said:
I'm sorry if my answer didn't please you but behaving that way doesn't help. Not only you didn't even thank me for my answer but you are also aggressive questioning my logic. Bye bye.
Click to expand...
Click to collapse
Have I offended you in anyway? In my post, I wasn't refering to your logic that I didn't follow, I'm referring to Sony. If there are obvious units out there with perfect alignment and some that aren't perfect, Sony should refer to those as defective units and issue a recall to fix it, no? It's a premium device after all. Didnt mean to offend you if i did, I'm sorry.
Lusterboi said:
its hard to tell from the picture i posted
Click to expand...
Click to collapse
So post one that highlights what you're talking about, i.e face on.
I don't have the phone with me at work today, but those of you who have the phone with you, maybe you can pick it up and view it a little. The frame where the magnetic charging port sits, seems to protrude a little more than the frame near the flap areas.
XperienceD said:
So post one that highlights what you're talking about, i.e face on.
Click to expand...
Click to collapse
Lusterboi said:
I don't have the phone with me at work today, but those of you who have the phone with you, maybe you can pick it up and view it a little. The frame where the magnetic charging port sits, seems to protrude a little more than the frame near the flap areas.
Click to expand...
Click to collapse
If I stare at mine hard enough, I think I can see the part around the charger protruding slightly more than above and below it. But the difference is very small and not noticeable unless you're looking for it.
This is mine .. I do not see the misalignment you have highlighted in your picture ...
ro_explorer said:
This is mine .. I do not see the misalignment you have highlighted in your picture ...
Click to expand...
Click to collapse
Look at angle from slightly bottom up, it's very minimum but once you find it, you can tell that the flap areas are more indented than the magnetic charging ports. I saw it last night once I got the phone. Try to turn the phone a little while you're looking at it, if the phone is sitting down on the table its very hard to tell. You have to be holding it and looking at the frame while moving the phone around. I just need to make sure that it'ts not a defective unit and that's how these phones were made. If not I'll return the phone for a replacement. All else with the phone is fine though. I'll also stop by a local store later to check out the z1 and z1s to see if they have the same problem.
camaro322hp said:
If I stare at mine hard enough, I think I can see the part around the charger protruding slightly more than above and below it. But the difference is very small and not noticeable unless you're looking for it.
Click to expand...
Click to collapse
yup, exactly what I saw. it is minimum and hardly noticeable. but once i see it, i cannot ignore it.
Your OCD it's way bigger than mine...
To be honest I don't really care about such "misalignment". If you don't see it or means it's not there, right?
// sent from my phone //
ro_explorer said:
Your OCD it's way bigger than mine...
To be honest I don't really care about such "misalignment". If you don't see it or means it's not there, right?
// sent from my phone //
Click to expand...
Click to collapse
okay here are the updated photos that i took. notice that on the left side, its not completely straight because of the extra protruding from the magnetic charger port.
I was kidding earlier with the OCD .
To be honest, I do not see anything wrong in the pictures. Maybe I really can not see it. You need to get right the reflections in order to evidentiate such think in a photo.
Bottom line: if YOU do not like it, go ahead and exchange it or return it. Anyway, the small, fine details, that you are looking after, will not be at the level of an iPhone. That's a fact.
Lusterboi said:
okay here are the updated photos that i took. notice that on the left side, its not completely straight because of the extra protruding from the magnetic charger port.
Click to expand...
Click to collapse
I don't see anything either in those photos.
To be sure that you're not just seeing an optical illusion from the reflections of the changing surface along that edge, why not just take a ruler to it and measure? Or place on a piece of paper and trace an outline? Does it wobble if you rest it on that edge?
You'll never be certain if you just rely on your eyes.
This is mine.
Lusterboi said:
okay here are the updated photos that i took. notice that on the left side, its not completely straight because of the extra protruding from the magnetic charger port.
Click to expand...
Click to collapse
The way you've applied your screen protector would be more annoying. Lay the left side on a flat surface and that will highlight it more, but to me it looks like the protective plastic is giving the illusion that it is.
Hi guys
Can you check curved edges part of display near top and bottom portion to see when pressed with little pressure whether screen goes down ? Especially near front facing camera .
Thank You
Checked near the front camera area and yes ,the screen goes down a little upon pressing in the edges with little pressure.
raserdude said:
Hi guys
Can you check curved edges part of display near top and bottom portion to see when pressed with little pressure whether screen goes down ? Especially near front facing camera .
Thank You
Click to expand...
Click to collapse
Mine as well.
@Yash24 , @tiberiuharcsa thanks guys for confirming regarding this issue.
Have it, too. But no problem. Seems to be normal.
allrightlite said:
Have it, too. But no problem. Seems to be normal.
Click to expand...
Click to collapse
Well I would't call a loose and slightly moving screen something normal...
tiberiuharcsa said:
Well I would't call a loose and slightly moving screen something normal...
Click to expand...
Click to collapse
And what is to do now? Maybe all Z Plays have this. You must look very critical to see this "issue". For me it's ok. There is no 100% perfect phone.
But is the issue bigger, then I would call the support.
allrightlite said:
And what is to do now? Maybe all Z Plays have this. You must look very critical to see this "issue". For me it's ok. There is no 100% perfect phone.
Click to expand...
Click to collapse
I agree, it's not a major issue, I was thinking to take of the screen completley and reglue it using some duble sided tape... But there is a risk of breaking the screen in the proces... It's not worth it
What about putting duck tape across top and bottom of the screen? Don't forget to make holes for loudspeaker, front camera and proximity sensor. And for microphone and fingerprint at bottom
So, you're all saying that tbe whole screen is moving a bit in the case? Check teardown and you'll see that is actually glued. Not my favorite solution but I suppose is cost effective.
Sent from my XT1635-02 using Tapatalk
Zeljko1234 said:
What about putting duck tape across top and bottom of the screen? Don't forget to make holes for loudspeaker, front camera and proximity sensor. And for microphone and fingerprint at bottom
So, you're all saying that tbe whole screen is moving a bit in the case? Check teardown and you'll see that is actually glued. Not my favorite solution but I suppose is cost effective.
Click to expand...
Click to collapse
Yah it's glued and very liberally glued at the top and the bottom of the screen. How do I know? Broke my screen a few months ago and replaced my screen myself.
flashallthetime said:
Yah it's glued and very liberally glued at the top and the bottom of the screen. How do I know? Broke my screen a few months ago and replaced my screen myself.
Click to expand...
Click to collapse
That's good news, actually. I've watched some tear down videos and guy was heating screen before trying to take it off.
From where and for how much you got replacement?
Zeljko1234 said:
That's good news, actually. I've watched some tear down videos and guy was heating screen before trying to take it off.
From where and for how much you got replacement?
Click to expand...
Click to collapse
Bought a screen off eBay, yes you need to heat up the glue underneath the screen with a heat gun.
Got the new screen in after I had to remove all the small piece of glass that was still glued but it's not an easy repair and I still have screen issues I assume the screen isn't the same quality as the original one which comes with a silver backing plate.
In bright sunlight my screen turns blue
The battery maybe will never die, because a bigger LiPo much longer live as a small one and we just load again all 2 or 3 days. So that's ok that's build in. Maybe the screen is much earlier broken. Hope it doesn't broke
My battery has 3600mAh(3597)
flashallthetime said:
Bought a screen off eBay, yes you need to heat up the glue underneath the screen with a heat gun.
Got the new screen in after I had to remove all the small piece of glass that was still glued but it's not an easy repair and I still have screen issues I assume the screen isn't the same quality as the original one which comes with a silver backing plate.
In bright sunlight my screen turns blue
Click to expand...
Click to collapse
So Moto should make it even less glued for easy repair
Btw, you forgot the price
Zeljko1234 said:
So Moto should make it even less glued for easy repair
Btw, you forgot the price
Click to expand...
Click to collapse
175 Canadian labour free because I did the repair.
No moto shouldn't use any less glue, just don't drop your phone is my advise
flashallthetime said:
175 Canadian labour free because I did the repair.
No moto shouldn't use any less glue, just don't drop your phone is my advise
Click to expand...
Click to collapse
I don't think that anyone is planning to drop the phone. Except maybe Turbo 2/Force.
https://youtu.be/fTJOL5ikuZA
Ironically, mine got green lines literally sitting on the desk.
I can confirm my phone has the same problem near the top left corner. It is so disappointing to see such a bad build quality.
If you observe carefully just above volume up button screen is not even inside the aluminum frame there is slight gap. And if you apply little pressure screen goes down. Is this normal ?
raserdude said:
If you observe carefully just above volume up button screen is not even inside the aluminum frame there is slight gap. And if you apply little pressure screen goes down. Is this normal ?
Click to expand...
Click to collapse
Yes, normal. Maybe it's make easier to get the sceen away to replace the battery. Normally you can't see this. You must really look exactly
allrightlite said:
Yes, normal. Maybe it's make easier to get the sceen away to replace the battery. Normally you can't see this. You must really look exactly
Click to expand...
Click to collapse
One more feature discovered
Hi All,
This spot appeared out of nowhere the other day.
Is it water? Is the glue under the screen coming off?
There is no crack or anything.
What do you guys think it is?
If it's something that won't expand, I don't mind it.
Looks like black color on glass is scratched
nNeFeroN said:
Looks like black color on glass is scratched
Click to expand...
Click to collapse
And it looks like it's getting bigger every day.
Any solution?
Lebo-Wog said:
And it looks like it's getting bigger every day.
Any solution?
Click to expand...
Click to collapse
I would contacted with service center to get best idea solution from them .
nNeFeroN said:
I would contacted with service center to get best idea solution from them .
Click to expand...
Click to collapse
Done, let's see where this lead.
Of course....
How encouraging to upgrade to another oneplus phone.
Lebo-Wog said:
Of course....
How encouraging to upgrade to another oneplus phone.
Click to expand...
Click to collapse
Oh it's sad... I just got 1 idea, to try coloring this place with something like nail polish
Lebo-Wog said:
Done, let's see where this lead.
Click to expand...
Click to collapse
Same happened to me on my OnePlus One, I figured it was from a really tight case that I had on it, taking it on and off, starting from the same corner. Mine was glass separating from digitizer..... It never effected the touch/screen function, but was terribly annoying.
I eventually replaced the screen and digitizer all in one piece. ( After a drop and screen smash)
Wonder if the 5t is built on same "layers" as the one.
Bummer.
Supertacomonkeyexplosion said:
Same happened to me on my OnePlus One, I figured it was from a really tight case that I had on it, taking it on and off, starting from the same corner. Mine was glass separating from digitizer..... It never effected the touch/screen function, but was terribly annoying.
I eventually replaced the screen and digitizer all in one piece. ( After a drop and screen smash)
Wonder if the 5t is built on same "layers" as the one.
Bummer.
Click to expand...
Click to collapse
I put the phone on ebay and the bidding will end today.
IT's around 180$ for a screen replacement.
Not worth it.