hello people. few days ago i had installed a wrong update version for my head unit and now i got this problem my stereo keep restarting and i cant do nothing .
maybe some know how to force android factory reset menu
Is it an MTCD/E or P type unit?
marchnz said:
Is it an MTCD/E or P type unit?
Click to expand...
Click to collapse
how i can see that?
Hi there,
Someone please help to guide me how to deal with the issue of wrong mcu update on px30 HU?
After update, I saw unmatched red notice on the screen but went on to update android version and the HU just stopped working but only the bottoms light flashing even after turning off car, so have to take out fuse to avoid battery drain.
Please see the image and a vid.
Thanks
Alam1974 said:
Hi there,
Someone please help to guide me how to deal with the issue of wrong mcu update on px30 HU?
After update, I saw unmatched red notice on the screen but went on to update android version and the HU just stopped working but only the bottoms light flashing even after turning off car, so have to take out fuse to avoid battery drain.
Please see the image and a vid.
Thanks
Click to expand...
Click to collapse
Vid attached now
Related
Hi,
I just bought this android head and installed this in my car.It’s a px5 4gb with android 8.I really like this unit but my problem is that a part of the touch screen is not working.I tried to reset the touch screen but nothing happens.I contacted eonon and they gave a software update which i did but nothing changed and now i am waiting for another solution from them.
Do you guys have any ideea what’s the problem?
I attached a pic and highlighted the area that is not working.
Thanks
Good morning!
I have bought a Hizpo Android radio for my Mercedes Benz Vito w639 (2012). This car haven't got steering wheel or controller for the radio, so I installed it without canbus (as the seller told me) and connecting Illumination and ACC directly to the car, bypassing the canbus.
The thing is that It started working perfectly the first day, but after some time the radio started to do really weird things, like resetting alone or getting looped on the startup showing a black screen with backlight on. Sometimes it works again for 1 day and after that starts again to fail. Anyone knows what is happening? I tried to access the recovery mode for trying a wipe, but I don't know the proper combination of buttons (this radio doesn't have physical buttons, only a reset button).
I don't know if in this forum is allowed to post the link of the website where I bought the radio, but if it's possible just tell me and I paste it.
I have a video of what happens when the radio starts to fail, but I cannot link it already to the post cuz I have less than 10 posts :crying: If you need them for helping me just tell me and I will send you a PM!
Thx for your help!! :laugh:
Nithilgan said:
Good morning!
I have bought a Hizpo Android radio for my Mercedes Benz Vito w639 (2012). This car haven't got steering wheel or controller for the radio, so I installed it without canbus (as the seller told me) and connecting Illumination and ACC directly to the car, bypassing the canbus.
The thing is that It started working perfectly the first day, but after some time the radio started to do really weird things, like resetting alone or getting looped on the startup showing a black screen with backlight on. Sometimes it works again for 1 day and after that starts again to fail. Anyone knows what is happening? I tried to access the recovery mode for trying a wipe, but I don't know the proper combination of buttons (this radio doesn't have physical buttons, only a reset button).
I don't know if in this forum is allowed to post the link of the website where I bought the radio, but if it's possible just tell me and I paste it.
I have a video of what happens when the radio starts to fail, but I cannot link it already to the post cuz I have less than 10 posts :crying: If you need them for helping me just tell me and I will send you a PM!
Thx for your help!! :laugh:
Click to expand...
Click to collapse
What did the reseller suggest when you contacted them for support?
marchnz said:
What did the reseller suggest when you contacted them for support?
Click to expand...
Click to collapse
Nothing at all, He didn't answer my messages at this moment.
hello....I keep getting this error code: 001, does anybody has a solution?
Hi guys ! I'm sorry if i made a wrong post.
I bought a Eonon GA9351 unit for Mazda 3 1st gen. The problem is... The BT is not working at all... It can't be found on multiple devices and also my unit can't find other devices... When i'm trying to scan, that spining whel shows up and spinning and spinning with no end... Did somebody had problems with BT option on their Head Units? And if yes, did you solve it? Thank you !
RukiRG said:
Hi guys ! I'm sorry if i made a wrong post.
I bought a Eonon GA9351 unit for Mazda 3 1st gen. The problem is... The BT is not working at all... It can't be found on multiple devices and also my unit can't find other devices... When i'm trying to scan, that spining whel shows up and spinning and spinning with no end... Did somebody had problems with BT option on their Head Units? And if yes, did you solve it? Thank you !
Click to expand...
Click to collapse
What solutions have you tried or considered after searching the forums?
I tried a hard reset, i tried an update from eonon, i tried a custom rom made by Malaysk
Bluetooth Name: FSC-BT510
Bluetooth Password: 5802
Thash25 said:
Bluetooth Name: FSC-BT510
Bluetooth Password: 5802
Click to expand...
Click to collapse
What's this?
Eonon GA9351
RukiRG said:
What's this?
Click to expand...
Click to collapse
Hi, I have the same problem!!! Is it working now? if yes what you did?
Yanmanmino064 said:
Hi, I have the same problem!!! Is it working now? if yes what you did?
Click to expand...
Click to collapse
Seems a solution is to disconnect the head unit or car battery for some time... I accidentally discovered it when I disconnected the battery of my car for a few hours. After that, the head unit had a hard reset (NOT Wipe) and the BT was alive again
RukiRG said:
Seems a solution is to disconnect the head unit or car battery for some time... I accidentally discovered it when I disconnected the battery of my car for a few hours. After that, the head unit had a hard reset (NOT Wipe) and the BT was alive again
Click to expand...
Click to collapse
Ok so I have to disconnect the battery for like one hour and reconnect the head unit before the battery... after that the Bluetooth problem supposed to be solved?!
Thank you for your help!!
Yanmanmino064 said:
Ok so I have to disconnect the battery for like one hour and reconnect the head unit before the battery... after that the Bluetooth problem supposed to be solved?!
Thank you for your help!!
Click to expand...
Click to collapse
Try first to disconnect only the head unit. If you will disconnect the car battery for more than a few minutes, you will be supposed to follow this tutorial https://www.youtube.com/watch?v=7q24rR401RA&t=177s
which will take approx 1 hour. If it doesn't work, try the battery trick. But do it on one of your days off, because you must to not use the car for a few hours. Mines works now for 3 months and still no issue anymore. Also, I permanently have something connected with the BT, is my phone or/and the OBD Scanner, but I don't know if this matter
RukiRG said:
Try first to disconnect only the head unit. If you will disconnect the car battery for more than a few minutes, you will be supposed to follow this tutorial https://www.youtube.com/watch?v=7q24rR401RA&t=177s
which will take approx 1 hour. If it doesn't work, try the battery trick. But do it on one of your days off, because you must to not use the car for a few hours. Mines works now for 3 months and still no issue anymore. Also, I permanently have something connected with the BT, is my phone or/and the OBD Scanner, but I don't know if this matter
Click to expand...
Click to collapse
Ok thank you so much !!
Hello. I just bought PX6 Android 10 car multimedia unit. It had no sound and steering control, so I thought I would update MCU and system. No I still not only didin't cleared the issues, but the screen is off to the side (lost about 20% screen), touch is out of normal operation, and have verson unmatched warning.....
Could someone help?
It was
MCU MTCE_HXD_V3.56_3
It's all touch, so is there a way to boot to recovery mode? I managed once, but can't repeat it, RST looks like not working and I'm desperated...
Welcome new member. Suggest taking some time to have a read through, you're likely to find related post and information.
First of all, thank you so much all for any help!! , so anything is greatly appreciated!
I bought an Android 10 unit Ainavi H5 8 core 1.6ghz Ram 4g+rom 32g, but whene I have tried to turn on,it start to Android logo a few seconds and reboot . still like like this every some second like on the video, someone have an idea please.
faymed said:
First of all, thank you so much all for any help!! , so anything is greatly appreciated!
I bought an Android 10 unit Ainavi H5 8 core 1.6ghz Ram 4g+rom 32g, but whene I have tried to turn on,it start to Android logo a few seconds and reboot . still like like this every some second like on the video, someone have an idea please.
Click to expand...
Click to collapse
Ask your seller to give you explanation and update files.
Aquire a new unit?
marchnz said:
Aquire a new unit?
Click to expand...
Click to collapse
I have purchased this unit (TS18 - AINAVI) just to prove it's superiority (Qualcomm) over traditional Chinese Mediatek units. Unit is ok and fast, all works, tested by myself, but it has a large flaw - canbus and software updating over internet.
I think same is here with his unit. Downloaded wrong settings for canbus and now it can't boot in.
Canbus problems over boot.