Xiaomi Mi 6 help with persist.img - Xiaomi Mi 6 Questions & Answers

So I have a xiaomi mi 6 and recently I had to change charging board. After I changed it phone was working but middle button and fingerprint sensor wasn't . I googled the problem and found it has something to do with persist.img and it can be flashed with twrp recovery. the thing is I was updated my phone before charging board broke so twrp got replaced with stock recovery. I tried to flashing twrp with fastboot this time but nothing happened. "fastboot boot recovery.img" did not do anything either. So I'm stuck at this point. Any help appreciated.

Related

My phone is stuck in bootloop

Guys, I was flashing MIUI rom on my redmi 1s and the process failed. So I removed the battery and was going to try again but It stared its boot loop. (The moment you put the battery in) it automatically goes into fastboot mode and it repeats; I mean it does not stays either into the fastboot mode or into the recovery.
Even I tried to install it using MI flash tool but because of boot loop it is not successfully installing the rom.
If anyone knows how to solve please respond.
Thank you.
vinsan98 said:
Guys, I was flashing MIUI rom on my redmi 1s and the process failed. So I removed the battery and was going to try again but It stared its boot loop. (The moment you put the battery in) it automatically goes into fastboot mode and it repeats; I mean it does not stays either into the fastboot mode or into the recovery.
Even I tried to install it using MI flash tool but because of boot loop it is not successfully installing the rom.
If anyone knows how to solve please respond.
Thank you.
Click to expand...
Click to collapse
Well, same thing also happened to me twice when I was applying update, My phone stuck in bootloop.
I flashed it with fastboot rom and it started working.

Stuck on MI-recovery 3.0, cannot get into fastboot, brick?

Hi, today i've flashed miui 9.5 and after ~2 hours, a phone rebooted and got into mi recovery. I can't even switch it off with power buton because it keeps booting into recovery. I disassembled the phone and cleared because i thought that volume up could have been pressed but it wasn't. I cannot boot into fastboot to flash new software. MIPCSUITE doesn't detect the phone. What should i do? Any suggestions?
Not sure, but the EDL guide should work in this case. You should find it here in this forum.

Need help to go back to MIUI

So I recently changed my Xiaomi Mi MIx 2 screen (the one before was broken) and I wss using LineageOS 16 with TWRP.
The problem is that, after I changed the screen, I could not boot back to LineageOS because I was stuck in a grey screen (after booting the phone I am able to see the Mi logo and the LineageOS loading animation, but after that nothing).
I tried to do a Wipe from the TWRP, but whenever I try to open the recovery I get stuck again with a grey logo... (and in the recovery it does not even shows the TWRP logo, just straight the grey screen). I am still able, however, to go in Fastboot mode and I do have an unlocked bootloader
So my question was... does anyone encounteredd the same problem? And does anyone know how to fix it?
Can I perhaps just use the Mi Flash tool from fastboot to go back to stock MIUI without first wiping from TWRP things like Dalvik cache, cache, System ecc... or would this method fail/brick my phone?
Thank you a lot to anyone that would spend time to help me (and sorry for my bad English, I am trying to improve it).
Have a nice day!
The mi mix2s rewrites a new recovery after every boot, so to get TWRP to work you have to flash it from fastboot every single time. So the next time you boot, reflash TWRP, then you can boot into recovery 1 time and flash the rom of your choice
Hi Guys,
Recently i'm changed my broken display of Mix 2 after that when i'm entering to recovery it showing a gray screen also the phone is detecting on PC.
some TWRP worked but after flashing custom ROM same as showing gray screen after finished boot also doing second try the touch not working on TWRP.
Now i'm using Global version of MIUI11, when flashing custom TWRP via FASTBOOT MODE its booting up but after that restarting the phone revert back to the stock Recovery. Earlier i'm used the final version of MIUI12 Weekly EU ROM
Guys if you know any workaround for this please help me to get rid out of this
Thanks in Advance

Fully dead zuk z2 plus ( Having blank screen with LCD backlight)

It all happened when i flashed MIUI 9 rom in zuk z2 plus, The flashing was succssfully done and i pressed the reboot system button, It has a MI splash screen and everything was fine then suddenly phone shuts down and when i restarted it there was nothing but a blank screen with LCD backlight in it. I got confused why this happened
So , i thought it might be solved by flashing a stock rom to it
So i flashed a stock rom in it (2.0.093 ST) but got me terrified with no results
i then flashed zui 2.5 rom to it but still that blank screen with LCD backlight.
I Also flashed it with mi flash but no solution.
So plz if someone knows how can i solve it the plz help me
(I am able to get ito EDL mode easily through button combination and deep flash method.)
xyro8651 said:
It all happened when i flashed MIUI 9 rom in zuk z2 plus, The flashing was succssfully done and i pressed the reboot system button, It has a MI splash screen and everything was fine then suddenly phone shuts down and when i restarted it there was nothing but a blank screen with LCD backlight in it. I got confused why this happened
So , i thought it might be solved by flashing a stock rom to it
So i flashed a stock rom in it (2.0.093 ST) but got me terrified with no results
i then flashed zui 2.5 rom to it but still that blank screen with LCD backlight.
I Also flashed it with mi flash but no solution.
So plz if someone knows how can i solve it the plz help me
(I am able to get ito EDL mode easily through button combination and deep flash method.)
Click to expand...
Click to collapse
Have u tried qfil?
Techie_pulkit said:
Have u tried qfil?
Click to expand...
Click to collapse
Yup
Flashing was successful but when i switched on from edl mode that same blank screen with lcd backlight

Clinically dead Redmi 5A - please help

Hi to all, I just want to ask for some advice or tips. The thing is:
I have one old Redmi 5A Riva. It was lying in the drawer some time, so I decided to try to unlock the bootloader and flash some custom ROM.
So, I unlocked the bootloader - OK
Then I flashed TWRP - OK
Then I decided to make root on stock firmware - OK
Then I tried to flash Lineage OS 17 - after flash it stopped booting.
So I tried to flash Lineage OS 18 - it started booting again but I found out that phone doesn´t detect an USB cable, so I wanted to flash some other ROM instead.
But after few moments TWRP suddenly disappeared (volume up + power on stopped working, only vol. down and power on worked to fastboot) - kinda weird, I said to myself Now I am f**ked up because Lineage 18 was not rooted, I wanted to do it later, so I couldn´t use TWRP app to reflash it.
But after few moments there appeared stock recovery menu, so I thought okay, maybe its not dead, so I try to flash just stock rom. I tried MIUI 10, but again - not booting.
So I did wipe again and tried MIUI 9 - flashing via fastboot and used flash_all.bat attached to rom - it booted up and worked, so I enabled USB debugging again and tried OMNI ROM. I flashed it, after flash it boots up, but after few second screen goes black and nothing else happens.
I am kinda annoyed with this , I flashed many phones, but only Xiaomi makes these weird problems.
Can someone help me to fix this?

Categories

Resources