Related
I recently rooted my Galaxy Note 2 (GT-N7100) - following 'High on Android' web site instructions.
Everything went well and I installed Clockwork Mod Recovery (CMR) and I backed up then current ROM successful.
Recently, I got a new update to Gmail so, I decided to backup the ROM again. I ran CMR and I was prompted to name the backup file and I was prompted the phone would reboot and complete the backup.. The result was the phone went into a loop constantly displaying the boot logo.
I overcame the problem by re-rooting the phone using ODIN - the download mode was accessible on the phone.
However I spoke to soon: the phone became increasingly unstable and, it eventual Froze. I tried to do a factory wipe & re-root the phone - That left me in exactly the same position - at the boot logo, dead. I have written an email CMR & High on Android but, they have not replied.
I quickly realised I would have re-flash the phone completely and I sourced the correct files from 'SamsFirmware'.
That's the first question: the file I download was compressed and when it was decompressed it gave me two files;
N7100XXALJ3_N7100OXXALJ4_N7100XXALJ2_HOME.tar.md5 & SS_DL.dll
Q1. Can I run this tar.md5 using ODIN (PDA) function?
Q2. I have read that a file like this need to be further spilt? If so, How?
Q3. If spilt the file into component parts, how will I identify / set up the files to ODIN ?
Mild panic is breaking out here - it's the last time I will ever flash a perfectly working phone again. Any advice or practical instructions you can provide to recovery the situation will be warmly welcomed!
Solved - http://www.lockermike.com/how-tos/a.../unbrick-a-galaxy-note-2-with-stock-firmware/
Thanks for sharing your solution, it's always good to know should anything go wrong. I'm about to flash new custom rom in an attempt to unlock the phone too
Hi all. I'm in a real pickle here and hoping someone can tell me how to get out of this mess. It's a bit of a long story, but I'll summarise as best I can.
I've had my Galaxy Note 2 LTE (N7105) for a year and I rooted it pretty much the day after I got it. I'm not new to rooting at all (fourth Android device since 2010, all rooted), but I still feel like a noob at times. Over this 2014 Easter period I had time off so I decided to change ROMs.
I was previously using CM 11, which I had been using pretty much since I rooted. And I had updated CM at least once a month, sometimes more frequently. So I was looking for some new ROMs, downloaded about 5 and tried them out. The last two I tried was OmniROM (a 4.4.2 ROM) and CM 11 Remix (also a 4.4.2 ROM). I was using TWRP 2.7.0.2 to do the wipes, caches, flashes, etc. I had no issues flashing OmniROM, but when I flashed CM 11 Remix, I couldn't get in the first time. I was stuck in a boot loop. I pulled the battery, got back into recovery and tried flashing again. Still boot looping. I think the mistake I made was a Data Format. Either way, I finally got CM 11 Remix to load by first wiping, flashing the ROM, GApps, a sensor fix, a camera fix, Devil Kernel and then Super SU. However once in the ROM I was getting constant Google Play Store / Services FCs. Oh, and yes, I went through the typical brand new Android setups, entering my Google account and so on... I found that if I cleared data / caches on both Google Play Store app and Google Play Services app, it gave me temporary joy but as soon as I tried to download any app in Google Play I'd get the FC. Also, my signal was totally gone. I tried flashing back to OmniROM as it was my last known good and working ROM, but now that was boot looping. I even tried some of the other ROMs from that bunch I had, including AOKP. All would boot loop.
So after much trying different GApp packages, I decided to best thing to do would be restore it to stock, root again, then go for the custom ROM (hopefully CM 11 Remix) from a nice clean slate. So I did this. I downloaded the Android 4.3 stock ROM from SamMobile here. Installed Odin 3.07, then loaded it up and flashed the stock ROM. All seemed to go great, but when the ROM was done and phone rebooted, I get stuck in another boot loop! This time at the white "Samsung" logo with the glowing blue edges. Not the model number screen. Also my LED light is on blue, if that means anything.
So I found this thread (post at top of page) which suggests I need to flash the PIT file during the stock ROM installation with Odin. So I found the PIT file here, and I'm ready to flash this along with the stock ROM... HOWEVER, I read something somewhere (can't find it now) that implied if I'm on Android 4.3, flashing a PIT is a bad move. Can anyone comment on that? I guessing since the stock ROM is 4.3, I'm technically on 4.3 (even though I can't get into it).
Or if anything else I'm doing immediately stands out as a seriously stupid move, please let me know. I've been without normal use of my phone for a couple days now and ironically I'm at the point where I'm considering going without a phone for the rest of my life... LOL! AS IF I COULD!
Anyways, any help will be much appreciated!
EDIT: I just realised I should have posted in Troubleshooting, not General Questions... If mods want to move this, please do.
i just suggest that you flash the stock odin without the pit and see if its working out or not. sometimes playing with pit files can screw up your device even more...
btw... next time you play flashing... i'm suggesting you make a backup of your working custom. its will save you lots of time if this kind of problem happen.
edan1979 said:
i just suggest that you flash the stock odin without the pit and see if its working out or not. sometimes playing with pit files can screw up your device even more...
btw... next time you play flashing... i'm suggesting you make a backup of your working custom. its will save you lots of time if this kind of problem happen.
Click to expand...
Click to collapse
I don't have any working ROM. All I have now is a boot loop.
invertedskull said:
I don't have any working ROM. All I have now is a boot loop.
Click to expand...
Click to collapse
I had a problem with my device where I was stuck at boot loader as well, but it was from the rar file of the rom(cm 11) cause I tried downloading it again and it worked.
I suggest you prepare Odin and the stock firmware, wipe factory/cache dalvik, system (advanced), then flash stock firmware, to bring everything back to normal.
Banutu said:
I had a problem with my device where I was stuck at boot loader as well, but it was from the rar file of the rom(cm 11) cause I tried downloading it again and it worked.
I suggest you prepare Odin and the stock firmware, wipe factory/cache dalvik, system (advanced), then flash stock firmware, to bring everything back to normal.
Click to expand...
Click to collapse
Hmmm, I'm not stuck at boot loader, just boot loop. Maybe you meant that?
To clarify, all I can do now is...
1. Boot normally and end up in a boot loop (at "Samsung" white logo with glowing blue edges).
2. Boot into Download mode and from there I can use Odin to flash / install.
3. Boot into stock recovery, which I've never used before (only ever used custom recovery).
I've prepped Odin again, ready to flash the stock firmware, but I've never done a wipe / factory reset with Odin. I don't see any Advanced settings? Did you mean I can do it elsewhere? Cos I see I can do wipes / factory reset from stock recovery.
So should I do that AND then go into Download mode and flash stock firmware with Odin?
invertedskull said:
Hmmm, I'm not stuck at boot loader, just boot loop. Maybe you meant that?
To clarify, all I can do now is...
1. Boot normally and end up in a boot loop (at "Samsung" white logo with glowing blue edges).
2. Boot into Download mode and from there I can use Odin to flash / install.
3. Boot into stock recovery, which I've never used before (only ever used custom recovery).
I've prepped Odin again, ready to flash the stock firmware, but I've never done a wipe / factory reset with Odin. I don't see any Advanced settings? Did you mean I can do it elsewhere? Cos I see I can do wipes / factory reset from stock recovery.
So should I do that AND then go into Download mode and flash stock firmware with Odin?
Click to expand...
Click to collapse
ohhh my bad, I meant boot loop (stuck at samsung logo), mine was stuck there but then after it restarts and goes into recovery mode
do these following steps and you should be fine with your device.
1. Go into recovery mode
2. Wipe factory/reset
3. Wipe cache
4. Wipe dalvik
5. Advance > format/system
Now you have no rom or any OS to load,
1. Power off the device
2. Open Odin on your PC(right click run as administrator)
3. power on your note in Download Mode
4. Connect your device to your PC via USB
5. odin should recognize your device, something blue like " ID" or something there, you should be familiar with that.
6. click PDA, and find the official stock firmware zip you got it from samsung website, and make sure it fits your device(for example if you have your note from italy you should have ITV)
7. Hit Start and it should finish in 5-10 minutes.
Its the cleanest way with Odin, I did some crap on my device and that's how I return it to normal.
Banutu said:
ohhh my bad, I meant boot loop (stuck at samsung logo), mine was stuck there but then after it restarts and goes into recovery mode
do these following steps and you should be fine with your device.
1. Go into recovery mode
2. Wipe factory/reset
3. Wipe cache
4. Wipe dalvik
5. Advance > format/system
Now you have no rom or any OS to load,
1. Power off the device
2. Open Odin on your PC(right click run as administrator)
3. power on your note in Download Mode
4. Connect your device to your PC via USB
5. odin should recognize your device, something blue like " ID" or something there, you should be familiar with that.
6. click PDA, and find the official stock firmware zip you got it from samsung website, and make sure it fits your device(for example if you have your note from italy you should have ITV)
7. Hit Start and it should finish in 5-10 minutes.
Its the cleanest way with Odin, I did some crap on my device and that's how I return it to normal.
Click to expand...
Click to collapse
All good! Cheers man!
I actually went ahead and booted into stock recovery and did the factory reset and partition wipe before I saw your post. And the stock firmware I'd flashed with Odin previously is now booting and I'm finally back in!!! WOOOOOOOOO!!!
Just need to root this bad boy and get back to a nice shiny custom ROM.
Thanks for the advice everyone!
invertedskull said:
All good! Cheers man!
I actually went ahead and booted into stock recovery and did the factory reset and partition wipe before I saw your post. And the stock firmware I'd flashed with Odin previously is now booting and I'm finally back in!!! WOOOOOOOOO!!!
Just need to root this bad boy and get back to a nice shiny custom ROM.
Thanks for the advice everyone!
Click to expand...
Click to collapse
I'm glad to hear that man, peace ^^
Banutu said:
I'm glad to hear that man, peace ^^
Click to expand...
Click to collapse
I have another hurdle... Some built in security is stopping SuperSU from running. It's not Knox, but something like it. I get this error message:
"Unauthorized access to a secured area has been blocked. Tap here for more info."
How can I disable this? I've searched on Google already but so far nothing is helping and I can mostly only find info about Knox...
EDIT: It was goddamn Knox all along... And I just disabled it by means of SuperSU. Finally!
invertedskull said:
I have another hurdle... Some built in security is stopping SuperSU from running. It's not Knox, but something like it. I get this error message:
"Unauthorized access to a secured area has been blocked. Tap here for more info."
How can I disable this? I've searched on Google already but so far nothing is helping and I can mostly only find info about Knox...
EDIT: It was goddamn Knox all along... And I just disabled it by means of SuperSU. Finally!
Click to expand...
Click to collapse
Lolol, see your finding your way on your own ^_^, I was about to give you this link and suggest you to read the comments as well
http://www.w0lfdroid.com/2013/12/Fix-Root-Problem-on-Android-4.3-for-Galaxy-S3-S4-Note2-Note3.html
Unfortunately for me I don't have Note 2 =(, I have an S II Plus, I hope to get Note 2 next month can't wait =S
Banutu said:
Lolol, see your finding your way on your own ^_^, I was about to give you this link and suggest you to read the comments as well
http://www.w0lfdroid.com/2013/12/Fix-Root-Problem-on-Android-4.3-for-Galaxy-S3-S4-Note2-Note3.html
Unfortunately for me I don't have Note 2 =(, I have an S II Plus, I hope to get Note 2 next month can't wait =S
Click to expand...
Click to collapse
Heh, yeah, all is well in my world once again!
The Note 2 is a great device man. I am sure you'll love it. The Note 3 looks great also, but I don't like the ribbed sides (I'm fussy) and last I read there's an eFuze that goes off once rooted or something along those lines. That's sh!t.
invertedskull said:
Heh, yeah, all is well in my world once again!
The Note 2 is a great device man. I am sure you'll love it. The Note 3 looks great also, but I don't like the ribbed sides (I'm fussy) and last I read there's an eFuze that goes off once rooted or something along those lines. That's sh!t.
Click to expand...
Click to collapse
What do you think about the new oneplus one, do you think I should get that instead?
Sent from my GT-I9105P using Tapatalk
Banutu said:
What do you think about the new oneplus one, do you think I should get that instead?
Sent from my GT-I9105P using Tapatalk
Click to expand...
Click to collapse
Hmmm, I haven't seen that one... Feel free to PM me a link.
Help Me!
Banutu said:
I'm glad to hear that man, peace ^^
Click to expand...
Click to collapse
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
mroldman281 said:
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
Click to expand...
Click to collapse
If you have access to anything, and don't get JUST the boot loop, then you DO NOT have the same case I was in. You are probably able to recover from this. Try posting on the Tf Forums. The guys over there are "specialists" in Asus Tf tablets, and as you'll see on this thread (http://www.transformerforums.com/fo...-boot-loop-after-doing-routine-cm-update.html), they gave me a lot of help. Not that I was able to recover, but they were awesome dudes.
mroldman281 said:
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
Click to expand...
Click to collapse
mroldman281, You didn't post again, so I don't know, If You found solution, but since I had same simptoms, and after four days of reinstalling different stock roms, wiping and even messing with PIT via Odin etc..I can say, that in my case the reason for boot loop was faulty battery. The phone worked when it was plugged in and restarted soon after i unplugged USB cable, and just lopped afterwards. Replacement battery put everything back in order. And I am one happy Camper!
Hope this info helps someone else with boot loop problem
same problem stuck in bootloop
hey guys i have the same problem bootloop all the time i tryied stock firmware but nothing happend avec i rooted my note 2 and intalled a costom recovery and a many roms but stuck in bootloop i didn't chage baterry , by the way i wiped cache and reset factory and clear dalvick cache but the same always bootloop
what u suggest i do
ps : i can acces to bootloader or download mode it charge normally
woow get back my note 2 lte alone
hey guys i get back my note 2 i don't know how but it was a succes :victory:
first : i tried so many afficial firmware 4.4.2 and costom roms but didn't change the problem of bootloop
then i remembred what version i was in it was 4.1.1 so i download it from sammobiles thenks to them flash it and boooom the note 2 lte start like a charm
i want to thanks everyone for their help even if they didn't help directly but this past 3 days i read almost all the threads about note 2
well i thinks one of the selutions here is to revert back the the original stock firmware like i did so maybe will fix the bootloop
I was trying to carrier unlock my phone, and to do that i tried to downgrade it 4.3 to 4.1.1, and only after i had pressed the button, i had noticed that this might brick my phone in a comment in one of the forums, this is what i did:
http://forum.xda-developers.com/showthread.php?t=2625461
after following this and trying to run odin with it, odin returned "FAIL", and due to my high level of stupidity at the time, i tried to use the original 4.1.1 as my PDA in odin right after, i didnt reboot or anything, just pressed start again with the other tar.md5 file....
so now i cannot go past the samsung galaxy s3 logo when booting. I CAN go into download mode though, but i have no clue what i am supposed to do afterwards
i have the Galaxy S 3 i747 (was 4.3 before the whole mess) at&t carrier, i am trying to unlock it because i am travelling and need a phone.
please help me fix it, i do not care about the warranty since i dont have it anymore anyways, as long as the phone is working
also, if possible, i also need to unlock it afterwards, any help is HIGHLY appreciated, thanks!
baruchadi said:
I was trying to carrier unlock my phone, and to do that i tried to downgrade it 4.3 to 4.1.1, and only after i had pressed the button, i had noticed that this might brick my phone in a comment in one of the forums, this is what i did:
http://forum.xda-developers.com/showthread.php?t=2625461
after following this and trying to run odin with it, odin returned "FAIL", and due to my high level of stupidity at the time, i tried to use the original 4.1.1 as my PDA in odin right after, i didnt reboot or anything, just pressed start again with the other tar.md5 file....
so now i cannot go past the samsung galaxy s3 logo when booting. I CAN go into download mode though, but i have no clue what i am supposed to do afterwards
i have the Galaxy S 3 i747 (was 4.3 before the whole mess) at&t carrier, i am trying to unlock it because i am travelling and need a phone.
please help me fix it, i do not care about the warranty since i dont have it anymore anyways, as long as the phone is working
also, if possible, i also need to unlock it afterwards, any help is HIGHLY appreciated, thanks!
Click to expand...
Click to collapse
Downgrading your boot loader from 4.3 is a guaranteed brick. I'm not sure if the brick will get you to the Samsung screen.
If you're already assuming its bricked reboot into recovery and do a full wipe. Restore a nandroid of something if you have one or try flashing a custom ROM. Because Odin failed maybe it never flashed the boot loader.
Worth a try
Sent from my SGH-I747M using XDA Free mobile app
baruchadi said:
I was trying to carrier unlock my phone, and to do that i tried to downgrade it 4.3 to 4.1.1, and only after i had pressed the button, i had noticed that this might brick my phone in a comment in one of the forums, this is what i did:
http://forum.xda-developers.com/showthread.php?t=2625461
after following this and trying to run odin with it, odin returned "FAIL", and due to my high level of stupidity at the time, i tried to use the original 4.1.1 as my PDA in odin right after, i didnt reboot or anything, just pressed start again with the other tar.md5 file....
so now i cannot go past the samsung galaxy s3 logo when booting. I CAN go into download mode though, but i have no clue what i am supposed to do afterwards
i have the Galaxy S 3 i747 (was 4.3 before the whole mess) at&t carrier, i am trying to unlock it because i am travelling and need a phone.
please help me fix it, i do not care about the warranty since i dont have it anymore anyways, as long as the phone is working
also, if possible, i also need to unlock it afterwards, any help is HIGHLY appreciated, thanks!
Click to expand...
Click to collapse
Welcome to the forum! Wished you'd come in much earlier though as you would have found you CANNOT downgrade from 4.3 to 4.1.1 to free unlock. Sorry, but once you are on 4.3, the surest way to unlock is to obtain the unlock code from the carrier or purchase one online. Sounds like you do have a soft brick. If your phone is still booting to the Samsung logo, then it's only a soft brick. Attempting to downgrade the 4.3 bootloader usually results in a hard brick so you may be in luck.
To fix this first, try to see if you can boot to recovery mode and do a hard wipe/factory reset. If you are able to boot to recovery (or download) mode then you have little to worry about. If the reset does not work, you can flash custom recovery via Odin and follow the instructions in the thread below to restore stock 4.3. Afraid, you have to revert to full stock 4.3 to get the phone back in working order and don't even think about 4.1.1.
http://forum.xda-developers.com/showthread.php?t=2658486
If you are not able to get to recovery, then you can see if you can boot from a debrick image following the instructions (on the first page) of the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
Once your phone is working normally, you can request the unlock code from AT&T via the request form below. If eligible, they should provide this. Otherwise, you would have to buy one online ....
https://www.att.com/deviceunlock/client/en_US/
Let me know if you need any further help.
KorGuy123 said:
Downgrading your boot loader from 4.3 is a guaranteed brick. I'm not sure if the brick will get you to the Samsung screen.
If you're already assuming its bricked reboot into recovery and do a full wipe. Restore a nandroid of something if you have one or try flashing a custom ROM. Because Odin failed maybe it never flashed the boot loader.
Worth a try
Sent from my SGH-I747M using XDA Free mobile app
Click to expand...
Click to collapse
I tried wiping everything, i also wiped cache, still didn't boot, thanks though!
Larry2999 said:
Welcome to the forum! Wished you'd come in much earlier though as you would have found you CANNOT downgrade from 4.3 to 4.1.1 to free unlock. Sorry, but once you are on 4.3, the surest way to unlock is to obtain the unlock code from the carrier or purchase one online. Sounds like you do have a soft brick. If your phone is still booting to the Samsung logo, then it's only a soft brick. Attempting to downgrade the 4.3 bootloader usually results in a hard brick so you may be in luck.
To fix this first, try to see if you can boot to recovery mode and do a hard wipe/factory reset. If you are able to boot to recovery (or download) mode then you have little to worry about. If the reset does not work, you can flash custom recovery via Odin and follow the instructions in the thread below to restore stock 4.3. Afraid, you have to revert to full stock 4.3 to get the phone back in working order and don't even think about 4.1.1.
http://forum.xda-developers.com/showthread.php?t=2658486
If you are not able to get to recovery, then you can see if you can boot from a debrick image following the instructions (on the first page) of the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
Once your phone is working normally, you can request the unlock code from AT&T via the request form below. If eligible, they should provide this. Otherwise, you would have to buy one online ....
https://www.att.com/deviceunlock/client/en_US/
Let me know if you need any further help.
Click to expand...
Click to collapse
I am able to get to recovery, but the first link isn't very clear.... i am not really familiar with odin and all this other stuff... lol, i am now downloading the files it says to download in the first link though, can you maybe tell me in a quick list what exactly im supposed to do?
thanks!
baruchadi said:
I tried wiping everything, i also wiped cache, still didn't boot, thanks though!
I am able to get to recovery, but the first link isn't very clear.... i am not really familiar with odin and all this other stuff... lol, i am now downloading the files it says to download in the first link though, can you maybe tell me in a quick list what exactly im supposed to do?
thanks!
Click to expand...
Click to collapse
It's time to start reading. Before doing any flashing/modding, you should make sure you understand what you're doing and know the risks.
Now as for Odin, it's quite straight forward. Phone needs to be in download mode, you put the PDA file in Odin and flash (if it's a Odin one-click, just need to hit start). One thing is to not interrupt it! Especially if flashing bootloaders cause that will brick your phone. Also, don't downgrade bootloaders.
There are a few guides in the sticky, I suggest you take an hour or two reading them so things like that don't happen again (or that you know what to do if it does).
GL!
baruchadi said:
I tried wiping everything, i also wiped cache, still didn't boot, thanks though!
I am able to get to recovery, but the first link isn't very clear.... i am not really familiar with odin and all this other stuff... lol, i am now downloading the files it says to download in the first link though, can you maybe tell me in a quick list what exactly im supposed to do?
thanks!
Click to expand...
Click to collapse
Alright. If wipe/reset didn't work, you'll need to restore full stock 4.3 via custom recovery. Here's what we need to do....
1) Download the Odin flashable *.Tar file for custom recovery. I prefer TWRP because of the GUI so that's where I'm pointing you to ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
2) Download the stock restore file for 4.3 from the thread below... If you are using TWRP, then the first link is the one you need
http://forum.xda-developers.com/showthread.php?t=2658486
3) Copy the stock restore zip file to a good quality (micro) SD card
4) I presume you have Odin already so you will use this to flash custom recovery to your phone. Run Odin.exe on your PC. If you are using Odin v.3.09 then you need the AP tab. For all other versions, use the PDA tab. Navigate to the custom recovery *.Tar file you downloaded earlier and place this in the PDA (or AP tab). Leave the default settings as is and do not check/uncheck any boxes other than the default settings.
5) Boot the phone to download mode via the 3-button combo (Volume Down/Home/Power). When you get to Odin (Download) mode, press volume up to continue. Connect the phone to your PC with a good quality micro USB cable. Wait until Odin has recognized the device then click on the Start button to start firmware installation (flashing). Wait for the flashing to end and the <Pass> message. Disconnect the phone from the PC and pull the battery to stop auto reboot.
6) Place the micro SD card with the stock restore zip in your phone. Replace the battery and boot to recovery mode. If you were successful with the firmware flashing above, it should boot you to custom recovery.
7) Select install from external card and navigate to the stock restore zip file. Select this file and swipe the screen to start firmware installation. Wait for installation to complete. Then clear your cache/dalvik and reboot to system.
This will hopefully do it.
So my issue is pretty similar, see what you guys think. i been trying everything i can think of.
i updated from xtrestolite 2.1 to 2.2 with out wiping. everything worked fine except when i would make calls, the other people could not hear me. so i updated the bootloader and modem again (i had done it before) and the problem persisted. i flashed back to stock and was getting stuck at the s6 edge screen. the only way to get around this was and get my phone to boot was to flash aou kernel. i was still having a similar issue with calling so I download a modem from a diffrent server and all of a sudden, it was working again on stock firmware... AWESOME!
now that i had all that done and my phone working as it should, i reset my phone for the first time and i got the FRP lock, wont boot phone because custom kernel. GREAT
I then flashed stock of6 again, the tar ball, and the 4 piece version. no dice
i then found of8, tried to flash that still no dice.
id love to flash twrp and load a rom on, but FRP is a alsjdflajs.
the phone will flash successfully, but upon reboot, it will go into recovery, run its course, reboot, and get stuck that the galaxy s6 edge screen.
i use the vol and power click during recovery to see what its doing and everything seems to go fine. it will then say failed to mount /data. im hoping flashing this with the pit file will work, but i cannot download the pit file from my work computer (hahah its blocks on 4shard and mega).
anyone have any other advice? i will update if i figure it out.
Regards team,
-Mad
p.s. none of this is xtrestolite's fault, that rom has been nothing but good to me.. my phone has been picky though. after 5.1.1 i had to flash a custom kernel in order for the digitizer to function properly.... any help is appriciated guys.
SO UPDATE!
nothing good, i tried the pit with of6 and of8, no dice. still stuck.
anyone got a s6 edge w a broken screen? you can claim it lost for all i care.
no one?
i guess if anything past flash stock firmware people dont know? was hoping for alittle more insight.
im sure if i could flash a kernel i could get it to turn on, but FRP has be at bay...
no help for you bro...Samsung just needs to release there software fixing for this comunity...I'm looking a for a dev to answer my question in this section about just flashing zip files in twrp instead of using odin or whatever other methods that can avoid all these problems that are all similar...hopefully in next few months it will be addressed
Hey mate, try this...
http://forum.xda-developers.com/showthread.php?p=61531848
Sent from my SM-G925T using Tapatalk 2
holy... fu34%# /S45it.... IT BOOT?!
after flashing every firmware 100000 times...
THANK YOU!
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.
Hello and sorry if this is the wrong category...
It's my first time making a thread on xda.
I've been looking for an answer for the past 2 hours, but I still have a bricked phone... As the title says, I can't enter the recovery mode anymore. I tried to do a factory reset (when I could enter the recovery mode) and the phone got stuck at erasing. Now I can't enter the recovery mode anymore. I downloaded a new firmware from sammobile for the SM-G925F. The firmware works since I used it on an other phone and everything worked just fine. The problem is, when I open Odin and add the .tar file to AP, it gets stuck at nand write and sometimes on boot.img. The phone isn't showing that it's downloading anything (it has no progress bar). At this point I have no idea what to do...
Some extra info that could be helpful:
The phone was bootlooping when I got to fix it;
I work in a kind of phone repair store where customers bring their phones for hardware and software repair. I do the software;
I've installed new firmwares on multiple phones and I never had something like this... Normally some time with google and xda could help me to find a working way to fix the problem, but as I said... I've been looking for 2 hours and the problem is still here;
I'm not a pro with Android and phones. I just like to learn new things and I'm still learning.
Could it be a hardware problem?
Can you show me your phone's download mode image to see where could be the problem?
Also, make sure you are flashing latest firmware, if you are downgrading it - than you will get such boot errors.
*Update*
I found out what was wrong. The eMMC chip was broken.