after installed lineageOS when i enter in odin mode i get the line "varranty void: 1 (0x030c)"
exist a way to return to varranty void: 0 ?
my Phone void is over from years but in this mode Samsung Health don't start giving a long error code.
I have found this video that explain howto fix Samsung Health check (
) but needs root privilege that i don't have with original Samsung firmware. exist a way to fix the problem via odin? ( for example pit command)
fabritrento said:
after installed lineageOS when i enter in odin mode i get the line "varranty void: 1 (0x030c)"
exist a way to return to varranty void: 0 ?
my Phone void is over from years but in this mode Samsung Health don't start giving a long error code.
I have found this video that explain howto fix Samsung Health check (
) but needs root privilege that i don't have with original Samsung firmware. exist a way to fix the problem via odin? ( for example pit command)
Click to expand...
Click to collapse
i solved using Pedometer2 app of samsung health instead.
Related
I've been reading many threads over the last 3 days, and I can't get back my SM-N9005.
My N9005 (Portuguese TPH) bricked doing a firmware update from 4.4.2 N9005XXUGNG1 (Portuguese TPH) to 5.0 Lollipop N9005XXUGBOB6 (Poland XEO) with Odin 3.09. Odin said success (PASS), but phone never rebooted.
Solution #1: http://forum.xda-developers.com/showthread.php?t=2531224 Thanks @msmercy42 I learned a lot from it but none of the N9005 unbrick.img worked for me.
Solution #2: http://forum.xda-developers.com/showthread.php?t=2625332 Thanks @ValenteL finally my N9005 goes into ODIN/Download mode.
However, I belive that solution #2 isn't going as smooth as it should. This is what I get when I get the phone to start from SD card:
Code:
[COLOR="Lime"]BOOT RECOVERY MODE[/COLOR]
CHECK BOOT PARTITIONS. .
COPY FROM T-FLASH. .
BOOT RECOVERY. .
WRITE 163840 sectors. .
[COLOR="Red"]FLASH WRITE FAILURE[/COLOR]
ddi : mmc_read failed
[COLOR="red"]ODIN MODE[/COLOR]
PRODUCT NAME: SM-N9005
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
[COLOR="Gray"]QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTION: Enable[/COLOR]
[COLOR="Red"]UDC START[/COLOR]
And then, Odin recognizes the phone.
Now I'm able to get Odin to recognize the phone, but I can't do anything with it. I've tried:
- flashing 4.4.2 N9005XXUGNG1 (Portuguese TPH) again - FAIL (see attachments) Phone outputs two lines, after UDC START:
Code:
[COLOR="Gray"](...)
WRITE PROTECTION: Enable[/COLOR]
[COLOR="Red"]UDC START[/COLOR]
MMC: mmc_read fail
[COLOR="Red"]ODIN : flash read failure[/COLOR]
- flashing N9005XXUGBOB6 (Poland XEO) again - FAIL
- flashing PIT files (tried 3 different ones) - FAIL Phone outputs another line, after UDC START:
Code:
[COLOR="Gray"](...)
WRITE PROTECTION: Enable[/COLOR]
[COLOR="Red"]UDC START[/COLOR]
MMC: mmc_read fail
I wasn't able to get any unbrick.img from a N9005 Lollipop yet. Is this the final solution for my problem? Since I'm able to get to odin mode, shouldn't this unbrick be enough? What does it mean "mmc_read fail"?? Any help?!?! I don't know what else to do...
Thanks!!
sorry, wrong location... already started a new thread on 9005 Galaxy Note 3 proper location.
http://forum.xda-developers.com/galaxy-note-3/help/help-sm-n9005-hard-bricked-sd-partial-t3070743
Moderator: please delete this one, i'm sorry for the inconvenient.
hello guy's, my samsung today work's fine and from one hour not work at all - dead, i try to turn on no lucky, enter recovery no lucky, enter download mode not lucky
i found on forum about debrick.img and put on 16GB card, and phone vibrate and turn on but stuck like on the pictures mmc read failed, any sugestion, all the best
http://postimg.org/image/ar0zp4olp/
http://postimg.org/image/h3g4yyrnx/
gigidel said:
hello guy's, my samsung today work's fine and from one hour not work at all - dead, i try to turn on no lucky, enter recovery no lucky, enter download mode not lucky
i found on forum about debrick.img and put on 16GB card, and phone vibrate and turn on but stuck like on the pictures mmc read failed, any sugestion, all the best
http://postimg.org/image/ar0zp4olp/
http://postimg.org/image/h3g4yyrnx/
Click to expand...
Click to collapse
Sounds like the emmc memory is dead. Try to use these debrick images that I had taken from my i9195 some time ago. Extract first. https://drive.google.com/file/d/0B_vlSjY0nNrkX001ZUs4ZUF6dXc/view?usp=sharing
https://drive.google.com/file/d/0B_vlSjY0nNrkSFRVUERoTkF5cnM/view?usp=sharing
thanks a lot Mountains788, i try this two debrick.img, but no lucky, still the same mmc read failed
gigidel said:
thanks a lot Mountains788, i try this two debrick.img, but no lucky, still the same mmc read failed
Click to expand...
Click to collapse
I had the same issue, 2days ago (also so an Galaxy S4 mini).
I solved it by holding the 'volume down + home button' while connecting/disconnecting the phone to my/from laptop.
I have the same problem
When i put the sdcard with debrick image in my phone, It says:
BOOT RECOVERY MODE
CHECK BOOT PARTITONS..
COPY FROM T-FLASH..
BOOT RECOVERY..
WRITE 139008 sectors..
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9190
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
And when i connect it to pc to flash by odin, it says "There is no pit partition"
When i put the pit file in odin, it says the same
What should i do?
Did you get it to work? I have the exact same problem with the same phone (GT-I9190) !!!!
Hi Every one,
am searching from long time but i did not find any solutions.please help me.[i bought device in 2014-Jan]
my unable to open even boot mode..[one week before i have installed SuperSU],
i have done steps
downloaded - Odin3
downloaded - http://www.sammobile.com/firmwares/database/GT-I9192/INU/
i have tried almost all versions
myCode
Code:
ODIN MODE
PRODUCT NAME: GT-I9192
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
CSB-CONFIG-LSB: 0x30
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: Enable
all firm wares are installed and PASS in Odin, Then automatically restart phone struck at android symbol showing[unable to get boot mode]..
if i installed this firm ware - CF-Auto-Root-serranods-serranodsxx-gti9192.tar.md5 am able to boot mode but after phone model display its offed...
similar problem is : http://forum.xda-developers.com/galaxy-s4-mini/help/galaxy-s4-mini-duos-gt-i9192-hard-brick-t3391631
please help me..thanks in advanced
My sister's S4 mini suddenly died, I cannot open the smartphone nor go on Recovery or download mode.
I used a debrick.img found here on xda put on a externaSD and manage to enter the download mode, then i try to flash a stock rom but it got stuck during the process (i leave odin running for hours without any success).
After that, when i retry the process this is what i got on screen:
Code:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS. .
COPY FROM T-FLASH. .
WRITE 139008 sectors. .
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
BOOTLOADER AP SWREV: 2
CSB-CONFIG-SLB: 0x30
WRITE PROTECTION: ENABLE
I try to flash different .pit file found here on xda for the i9195 but if i try to flash (using Odin 3.13 or even odin 1.85) it says
Re-Partition operation failed or There is no PIT partition.
Any other idea i can try?
Maybe another .pit file for i9195 and a firmware that work with it?
Thanks to everyone
Goku_ssj3 said:
My sister's S4 mini suddenly died, I cannot open the smartphone nor go on Recovery or download mode.
I used a debrick.img found here on xda put on a externaSD and manage to enter the download mode, then i try to flash a stock rom but it got stuck during the process (i leave odin running for hours without any success).
After that, when i retry the process this is what i got on screen:
I try to flash different .pit file found here on xda for the i9195 but if i try to flash (using Odin 3.13 or even odin 1.85) it says
Re-Partition operation failed or There is no PIT partition.
Any other idea i can try?
Maybe another .pit file for i9195 and a firmware that work with it?
Thanks to everyone
Click to expand...
Click to collapse
I think her EMMc chip is probably dead, so needs replacing (new motherboard)
Hi,
I've read lots of topics but can't find an answer to this : how to root a Samsung SM-320FL ? I don't intend to flash a custom ROM, but I can do it if this is the only way to get root. I really need to delete (not only disable) all the programs I don't use like Excel, Powerpoint, Word, etc. so I get more internal storage space. I have a sd card but I have to move apps manually from internal storage ro sd card after each update. Very boring...
I have samsung usb drivers installed, and tried several differents versions of Odin, but everytime I try to install the custom recovery twrp, Odin gives a "Fail!" message.
Here is what I have on screen when in download mode :
Odin mode
Download speed: fast
Product name: SM-A320FL
Current binary: Samsung Official
System Status: Official
FRP Lock: Off (I have checked the OEM unlock in settings)
Secure download : Enabled
CCIC: S2MU004
Warranty void: 0 (0x0000)
AP SWREV: B:5 K:3 S:3
After Odin fails, I get the extra (red) line :
Kernel rev. check fail. device:3, binary:1
The firmware informations are :
Oreo 8.0.0
A320FLXXS5CSK1
Kernel: Mon Nov 18 2019
I suppose the firmware version is too recent but can you please confirm ?
Any hope to root ? With or Without (preferably) flashing a new firmware ?
Thanks for any advice.
fabriceeudes said:
Hi,
I've read lots of topics but can't find an answer to this : how to root a Samsung SM-320FL ? I don't intend to flash a custom ROM, but I can do it if this is the only way to get root. I really need to delete (not only disable) all the programs I don't use like Excel, Powerpoint, Word, etc. so I get more internal storage space. I have a sd card but I have to move apps manually from internal storage ro sd card after each update. Very boring...
I have samsung usb drivers installed, and tried several differents versions of Odin, but everytime I try to install the custom recovery twrp, Odin gives a "Fail!" message.
Here is what I have on screen when in download mode :
Odin mode
Download speed: fast
Product name: SM-A320FL
Current binary: Samsung Official
System Status: Official
FRP Lock: Off (I have checked the OEM unlock in settings)
Secure download : Enabled
CCIC: S2MU004
Warranty void: 0 (0x0000)
AP SWREV: B:5 K:3 S:3
After Odin fails, I get the extra (red) line :
Kernel rev. check fail. device:3, binary:1
The firmware informations are :
Oreo 8.0.0
A320FLXXS5CSK1
Kernel: Mon Nov 18 2019
I suppose the firmware version is too recent but can you please confirm ?
Any hope to root ? With or Without (preferably) flashing a new firmware ?
Thanks for any advice.
Click to expand...
Click to collapse
Hello guys,
I am new to the forum so I hope this is the best way to get the attention of anyone who could help users of the Samsung A3 (2017) running on Oreo 8.0.0
A320FLXXS5CSK1 like me and fabriceeudes.
I am a total newbie, so if anyone could even suggest an exhaustive step by step guide for rooting my phone (still running great but suffering from its limited internal memory capacity) without risking to brick it, it would be greatly appreciated!
Thanks in advance and have a nice day!
Teanza
fabriceeudes said:
Hi,
I've read lots of topics but can't find an answer to this : how to root a Samsung SM-320FL ? I don't intend to flash a custom ROM, but I can do it if this is the only way to get root. I really need to delete (not only disable) all the programs I don't use like Excel, Powerpoint, Word, etc. so I get more internal storage space. I have a sd card but I have to move apps manually from internal storage ro sd card after each update. Very boring...
I have samsung usb drivers installed, and tried several differents versions of Odin, but everytime I try to install the custom recovery twrp, Odin gives a "Fail!" message.
Here is what I have on screen when in download mode :
Odin mode
Download speed: fast
Product name: SM-A320FL
Current binary: Samsung Official
System Status: Official
FRP Lock: Off (I have checked the OEM unlock in settings)
Secure download : Enabled
CCIC: S2MU004
Warranty void: 0 (0x0000)
AP SWREV: B:5 K:3 S:3
After Odin fails, I get the extra (red) line :
Kernel rev. check fail. device:3, binary:1
The firmware informations are :
Oreo 8.0.0
A320FLXXS5CSK1
Kernel: Mon Nov 18 2019
I suppose the firmware version is too recent but can you please confirm ?
Any hope to root ? With or Without (preferably) flashing a new firmware ?
Thanks for any advice.
Click to expand...
Click to collapse
Is this the file you are trying to flash via Odin? You are adding the TWRP file to the AP option correct?
https://dl.twrp.me/a3y17lte/twrp-3.3.1-0-a3y17lte.img.tar.html
nevertechdose said:
Is this the file you are trying to flash via Odin? You are adding the TWRP file to the AP option correct?
https://dl.twrp.me/a3y17lte/twrp-3.3.1-0-a3y17lte.img.tar.html
Click to expand...
Click to collapse
Hello,
Sorry for the (very very) delayed answer. I still own and use this phone
I can't answer this as many things changed on my phone : a few Samsung OTA updates.
Anyway, following this :
[GUIDE][17.06.2019] RMM/KG bypass - Root/Install TWRP on Exynos Samsung after 2018
UPDATE 17.06.2019 - NEW RMM/KG bypass patch UPDATE 23.02.2019 - Pie and more Please take some time and read carefully the whole post. I am not and i won`t be responsable for anything. Disclaimer I am not responsible for bricked devices, dead...
forum.xda-developers.com
I was able to successfully install TWRP on my phone.
Then following this (ie using magisk 20.4 as the root.zip) :
How to root Samsung A3 (2017) - Guide
I successfully rooted my Samsung Galaxy A320FL following more or less this guide (I know, it's a video and that's annoying, but it's also very clear. And there is a text version linked in description), with some modifications though. I will...
forum.xda-developers.com
I was able to root my phone.
I am now going to delete all the software I do not need, getting more internal storage.
I will modify the title as my problem is solved.
Thanks to all the guys on this forum.