Hello,
I have a problem with my mix max 3, it bootloop I try to flash it in EDL mode but miFlashTool puts me as a message: cannot receive hello package miflash is trying to reset statut !
Someone knows how to restart this phone because it does not work anymore.
The bootlooder is locked
thanks
i tried to flash my phone with redmi 6 pro's fastboot room using mi flash.now nothing coming to the screen. again i tried to flash using stock rom but now showing error "cannot read from port COM6" sometimes ''cannot receive hello packet"
What can i do now please someone help me please :crying::crying::crying::crying::crying::crying::crying:
please help me
hard brick a2 lite no recovery no fastboot no.......... only edl mode
brick a2 lite after flashing file redmi 6 pro because activated Anti rollback
problem flash for miflash error can not read port #
please edit prog_emmc_firehose_8953_ddr.mbn
Or suggest a way to fix this
PLEASE UPLOAD FULL DUMP EMMC A2 LITE PLEASE
Help me, God for a month I have no phone
Alobalo said:
please help me
hard brick a2 lite no recovery no fastboot no.......... only edl mode
brick a2 lite after flashing file redmi 6 pro because activated Anti rollback
problem flash for miflash error can not read port #
please edit prog_emmc_firehose_8953_ddr.mbn
Or suggest a way to fix this
Help me, God for a month I have no phone
Click to expand...
Click to collapse
Mi A2 Lite doesn´t have activated ARB, the brick is cause you flashed a wrong firmware.
If you´re sure that your model is Mi A2 Lite then flash the firmware for it.
Use test point, if you can't with test point the rice is the second option.
Alobalo said:
please help me
hard brick a2 lite no recovery no fastboot no.......... only edl mode
brick a2 lite after flashing file redmi 6 pro because activated Anti rollback
problem flash for miflash error can not read port #
please edit prog_emmc_firehose_8953_ddr.mbn
Or suggest a way to fix this
Help me, God for a month I have no phone
Click to expand...
Click to collapse
If you can enter EDL mode ,download the latest stock firmware (it has to be in .kdz format) , use MiFlash ,check the option Clear All (without locking the bootloader) ,then navigate to your extracted folder ,hit refresh ,see if your device is showing in MiFlash ,and vlick the Flash Button. If your phone doesn't appear in Mi Flash - it might be a drivers issue ,or your phone is not in EDL mode.If you need help ,PM me
hello friend managed to solve? I have the same problem
Alobalo said:
please help me
hard brick a2 lite no recovery no fastboot no.......... only edl mode
brick a2 lite after flashing file redmi 6 pro because activated Anti rollback
problem flash for miflash error can not read port #
please edit prog_emmc_firehose_8953_ddr.mbn
Or suggest a way to fix this
PLEASE UPLOAD FULL DUMP EMMC A2 LITE PLEASE
Help me, God for a month I have no phone
Click to expand...
Click to collapse
hello friend managed to solve? I have the same problem
Hello friend!
Alobalo said:
please help me
hard brick a2 lite no recovery no fastboot no.......... only edl mode
brick a2 lite after flashing file redmi 6 pro because activated Anti rollback
problem flash for miflash error can not read port #
please edit prog_emmc_firehose_8953_ddr.mbn
Or suggest a way to fix this
PLEASE UPLOAD FULL DUMP EMMC A2 LITE PLEASE
Help me, God for a month I have no phone
Click to expand...
Click to collapse
I was having semi-like problem and I looked everywhere at internet for two weeks,
Please try,
https://xiaomitools.com/mi-flash-tool/
mi flash 20160401 version 64 bit,
And firmware
https://daisyfiles.pp.ua/Firmwares/...0.PDLMIXM_20190114.0000.00_9.0_e8d8d4a6d0.tgz
I have tried all vers of MI flash, not worked but that worked for me,
Good luck!
i have the same problem. i accidently deleted all partiton di qfil , then the phone stuck in edl mode with an empty partition ,i cant flash anything , i guess the phone is dead.
lawong said:
i have the same problem. i accidently deleted all partiton di qfil , then the phone stuck in edl mode with an empty partition ,i cant flash anything , i guess the phone is dead.
Click to expand...
Click to collapse
Your case is different than the other, you should need a box like Octoplus, Miracle or take out to a technician that already have it to repair it.
SubwayChamp said:
Your case is different than the other, you should need a box like Octoplus, Miracle or take out to a technician that already have it to repair it.
Click to expand...
Click to collapse
already tried miracle /qcdownload tool and other similiar , but fail, it can read the emmc amd flash the file but cant store it in memory ,i guess the emmc already burned.
Hi there,
I have got a bricked Redmi 5 Plus from my friend.
The phone has locked bootloader.
Firstly, I've read about that I had to turn the phone in EDL mode.
I've launched the redmi phone in EDL mode by test points.
I've tried to flash ROM via miflash, the program gives me an error xml during system.img flash after about 570 seconds.
In only one ROM that I've downloaded I was able to get to the system.img flashing for about ~570 seconds.
On other ROM's the error was at ~26 seconds.
Another option that I've tried was to flash via QPST.
Here, I've got firehose error, or sahara error, depends on which ROM i was trying to flash.
I'm not able to boot or change developer settings.
I can't even get to the MIUI's recovery.
Could someone help me deal with it? Please
I can Help you by logging in my EDL Authorised account. Free just help you
urbanmec said:
I can Help you by logging in my EDL Authorised account. Free just help you
Click to expand...
Click to collapse
Could you give me some contact info please?
Hi everyone. My Redmi note 5 pro is not turning on, it just gets stucked at the "redmi" logo. I tried disconnecting the battery but that didn't work. Since I can enter fastboot mode I also tried to flash the fastboot miui 12 rom with Miflash but an error appears saying "error flashing partition - write protected" (my phone has bootloader already unlocked). Even in EDL mode I couldn't flash the rom since it doesn't let me authenticate in my xiaomi account and miflash gets stucked at "edl authentication". Can you help me to unbrick my phone? Thank you.
nico.fiaba1 said:
Hi everyone. My Redmi note 5 pro is not turning on, it just gets stucked at the "redmi" logo. I tried disconnecting the battery but that didn't work. Since I can enter fastboot mode I also tried to flash the fastboot miui 12 rom with Miflash but an error appears saying "error flashing partition - write protected" (my phone has bootloader already unlocked). Even in EDL mode I couldn't flash the rom since it doesn't let me authenticate in my xiaomi account and miflash gets stucked at "edl authentication". Can you help me to unbrick my phone? Thank you.
Click to expand...
Click to collapse
Same thing happened to me and another one of my friends who owned redmi note 5 pro last week. Trust me I literally tried everything, but sadly I had to go for a new phone. The xiaomi service center told me the motherboard needed to be replaced which would cost 4-5k plus the screen would need to be replaced ( if you have even a couple screen cracks ) which would cost another 2-3k. Even then I would advise to go for a new phone.
Still sus how so many RN5 pro are getting the write protected error out of nowhere in the past 15 days. I did see a couple more posts about the same here.
Hi, I have the same problem. So I did enter EDL with the two pins on the mainboard, but when I try to flash miui 12 with QFIL (Qualcomm Flash Image Loader) I get authentication error. Even if I used a patched firehose programmer file. I tried 3 different patched firehose programmer files.
Does someone have a working patched firehose programmer file for Xiaomi Redmi Note 5 Pro?
So If we do not find a working patched firehose programmer file or a xiaomi developer who share his account for 5 min then I think we are not able to solve this problem..
ralaud said:
Hi, I have the same problem. So I did enter EDL with the two pins on the mainboard, but when I try to flash miui 12 with QFIL (Qualcomm Flash Image Loader) I get authentication error. Even if I used a patched firehose programmer file. I tried 3 different patched firehose programmer files.
Does someone have a working patched firehose programmer file for Xiaomi Redmi Note 5 Pro?
So If we do not find a working patched firehose programmer file or a xiaomi developer who share his account for 5 min then I think we are not able to solve this problem..
Click to expand...
Click to collapse
Search it on XDA forum there are links and explanation how to use it.
Tip: use MI flash tool (start with version from 2018 and than newer....)
Same thing happened to me in the last week of may, I even posted a thread here for help and my phone is even stuck on fastboot logo, sadly i couldn't find any solutions. If you find any solutions please reply to this post and help a brother.
Warvid said:
Same thing happened to me in the last week of may, I even posted a thread here for help and my phone is even stuck on fastboot logo, sadly i couldn't find any solutions. If you find any solutions please reply to this post and help a brother.
Click to expand...
Click to collapse
Did you end up solving the issue? I am also facing the exact same issue.