Hi, I recently updated to MIUI 12 via fast boot and I found out that Netflix is not supported. My devices aren't rooted and I let my bootloader to unlock. Does anyone else have this issue? or there is a way to fix this issue?
Ps: My Widevine certification is L1.
DanielShore said:
Hi, I recently updated to MIUI 12 via fast boot and I found out that Netflix is not supported. My devices aren't rooted and I let my bootloader to unlock. Does anyone else have this issue? or there is a way to fix this issue?
Ps: My Widevine certification is L1.
Click to expand...
Click to collapse
Leaving the Bootloader Unlocked makes netflix not work
Related
Hey i bought Lg G7 model: Lm-G710Vm recently everything is fine but for some reason its widevine cdm security level is L3 which which was suppose to be L1. I can only stream netflix in SD quality. I dont know whats the problem. Its running Android 9. And i dont think it has bootloader unlocked as i cant even go in to fastboot.
Syedhamza15 said:
Hey i bought Lg G7 model: Lm-G710Vm recently everything is fine but for some reason its widevine cdm security level is L3 which which was suppose to be L1. I can only stream netflix in SD quality. I dont know whats the problem. Its running Android 9. And i dont think it has bootloader unlocked as i cant even go in to fastboot.
Click to expand...
Click to collapse
Netflix suggests to factory reset the phone or contact LG if your bootloader is locked and you are not rooted
Hey there,
I get next week my OP9 Pro.
Is it right, that I lose Widevine L1 after I the unlock bootloader or are there any new tricks?
If not then I must dispense of root...
Thanks for your help.
Mine stays on L1 with unlocked bootloader and latest magisk.
FlipmodeBG said:
Mine stays on L1 with unlocked bootloader and latest magisk.
Click to expand...
Click to collapse
That sounds good. I will try it next week. Which model do you have EU, Global or Indian?
Just wanted to ask the same question... Thanks @Marcelm2000 and @FlipmodeBG !!!
Can someone confirm this with an EU device?
EU version here, L1 after bootloader unlock and magick canary
Insaniity said:
EU version here, L1 after bootloader unlock and magick canary
Click to expand...
Click to collapse
Thanks a lot! I will give it a go somewhere next week
Mine 9 Pro - newest EU Soft, magisk stable, and L1 level here
Just unlocked my bootloader yesterday and after unlocking gave me Widevine L3. After rooting with magisk stable and magiskhide it gave me L1
Anyone have L1 on Global? I'm rooted with Magisk canary, passing safetynet, but still at L3.
nrmh said:
Anyone have L1 on Global? I'm rooted with Magisk canary, passing safetynet, but still at L3.
Click to expand...
Click to collapse
What command did you use to unlock the bootloader?
Did you use Magiskhide?
flaxjef said:
What command did you use to unlock the bootloader?
Did you use Magiskhide?
Click to expand...
Click to collapse
I used fastboot oem unlock, if I recall correctly. And I have MagiskHide enable in Magisk.
I had done the same the first time with that command and mine also was L3.
What I did and fixed it (for me) was relocking the bootloader and unlock it with "fastboot flashing unlock", then installed magisk stable and used MagiskHide, then it was L1. Hope this fix it for you.
flaxjef said:
I had done the same the first time with that command and mine also was L3.
What I did and fixed it (for me) was relocking the bootloader and unlock it with "fastboot flashing unlock", then installed magisk stable and used MagiskHide, then it was L1. Hope this fix it for you.
Click to expand...
Click to collapse
All right. I'll give it a shot. Thanks.
flaxjef said:
I had done the same the first time with that command and mine also was L3.
What I did and fixed it (for me) was relocking the bootloader and unlock it with "fastboot flashing unlock", then installed magisk stable and used MagiskHide, then it was L1. Hope this fix it for you.
Click to expand...
Click to collapse
Does this require wiping data like usual when re-locking and then unlocking bootloader again?
flaxjef said:
I had done the same the first time with that command and mine also was L3.
What I did and fixed it (for me) was relocking the bootloader and unlock it with "fastboot flashing unlock", then installed magisk stable and used MagiskHide, then it was L1. Hope this fix it for you.
Click to expand...
Click to collapse
Disregard my last message. I asked because Netflix said L3, but I downloaded the DRM Info app and it shows L1. I cleared cache and data for Netflix and then logged back in and now it shows L1 there too.
Here's the thread that helped me figure that out:
https://www.reddit.com/r/oneplus/comments/kzojbc
elodin_89 said:
Disregard my last message. I asked because Netflix said L3, but I downloaded the DRM Info app and it shows L1. I cleared cache and data for Netflix and then logged back in and now it shows L1 there too.
Here's the thread that helped me figure that out:
https://www.reddit.com/r/oneplus/comments/kzojbc
Click to expand...
Click to collapse
elodin_89 said:
Disregard my last message. I asked because Netflix said L3, but I downloaded the DRM Info app and it shows L1. I cleared cache and data for Netflix and then logged back in and now it shows L1 there too.
Here's the thread that helped me figure that out:
https://www.reddit.com/r/oneplus/comments/kzojbc
Click to expand...
Click to collapse
Thanks for your reply, it could help some other users. But after my first unlock DRM info said Widevine was L3. But second attempt was successful
Other than looking at your streaming rate, is there a way to tell which level of widevine you have?
TPXX said:
Other than looking at your streaming rate, is there a way to tell which level of widevine you have?
Click to expand...
Click to collapse
I don't even know how to view my streaming rate. Everyone uses the DRM Info app on the play store. It will tell you.
How to check if your Android device supports Widevine DRM
Want to know if your Android device can stream HD videos from Netflix and Amazon Prime Video? Here's how to check for Widevine DRM support!
www.xda-developers.com
Okay, I redid everything, using fastboot flashing unlock this time, and I'm getting L1.
interesting, I am on global 11.2.2.2 (rooted/magisk stable/lsposed) running magisk hide and getting L1 widevide. I used 'fastboot oem unlock' but I do not use netflix so it doesn't matter too much for me, but good to know.
Hi , I would like to unlock the bootloader ->root(magisk)-> install viper4android and blocking ad module.I have updated to 12.0.1.0(RJSEUXM) (android 11) completely stock.
What about the widevine L1 ? If i unlock the bootloader i lose the L1 forever or only when unlocked or only when phone is rooted.
Is there any module for the device to be in L1 state and rooted?
Has anyone tested it?
thanos1916 said:
Hi , I would like to unlock the bootloader ->root(magisk)-> install viper4android and blocking ad module.I have updated to 12.0.1.0(RJSEUXM) (android 11) completely stock.
What about the widevine L1 ? If i unlock the bootloader i lose the L1 forever or only when unlocked or only when phone is rooted.
Is there any module for the device to be in L1 state and rooted?
Has anyone tested it?
Click to expand...
Click to collapse
Edit - retested and it's L1
Because I had vanced installed it shows as L3
For some reason Mi 10T lite maintains L1 widevine with unlocked bootloader. I always use Magisk hide, so it might contribute to the fact that L1 still works. I've just checked it on my 12.0.1.0 RJSEUXM with DRM info app and Netflix, both reporting L1.
@_mysiak_ so its safe to root. Might have you installed viper4android with this version? is working properly?
thanos1916 said:
@_mysiak_ so its safe to root. Might have you installed viper4android with this version? is working properly?
Click to expand...
Click to collapse
Yes, I am using Viper on a daily basis. With recent Magisk versions it might need a fix - https://forum.xda-developers.com/t/mod-viper4android-miui-12-magisk-21-1.4203489/
Hey folks,
i had my HD1900 with AA International Firmware. Unlocked with Magisk L1 on latest OOS10
i did and ota to OOS 11.0.1.1 and needed to wipe data in oos recovery. after the cellphone bootet up normaly. I started Netflix and look the bad quality. After i checken the Widevine Level and i have a downgrade to L3
i did a factory reset again and installed custom rom. but still have the l3 level
can you help me?
OP Service just want logkit file which i cant provide anymore because i wont go back to oos if fix is not sure.
br
pxrave said:
Hey folks,
i had my HD1900 with AA International Firmware. Unlocked with Magisk L1 on latest OOS10
i did and ota to OOS 11.0.1.1 and needed to wipe data in oos recovery. after the cellphone bootet up normaly. I started Netflix and look the bad quality. After i checken the Widevine Level and i have a downgrade to L3
i did a factory reset again and installed custom rom. but still have the l3 level
can you help me?
OP Service just want logkit file which i cant provide anymore because i wont go back to oos if fix is not sure.
br
Click to expand...
Click to collapse
Hi. All I know is once I MSN Tool from 11 to 10 I got L1 back because I don't realize that the tool relocked my bootloader.... Then from 10 to 11 update and still L1 (bootloader locked)
Soon as I unlock my bootloader on 11 right back to L1. And I'm super crazy about this issue. Anyway, best I can say is I can't seem to have both unlocked bootloader and L1... So it's one or the other. Nothing I've read our tried has worked and it's like a waste of time trying. But, do what you gotta do cause I failed and you may not. Good luck. Thanks
Earlier my 9pro was rooted and bootloader was unlocked with DRM L1 status but after uninstalling magisk and blocking the bootloader my phone is truck on DRM L3. Can someone guide me how to fix this issue ? I have to lock my bootloader as one of the app i use for studying just bans the account if they find the phone has unlocked bootloader/rooted . Thanks
Vic36 said:
Earlier my 9pro was rooted and bootloader was unlocked with DRM L1 status but after uninstalling magisk and blocking the bootloader my phone is truck on DRM L3. Can someone guide me how to fix this issue ? I have to lock my bootloader as one of the app i use for studying just bans the account if they find the phone has unlocked bootloader/rooted . Thanks
Click to expand...
Click to collapse
I'm on stock A12 TMO LE2127 rooted using magisk and unlocked bootloader. An app I use will not run under this state unless I add it to the magisk deny list. I am widevine L1.
TheGhost1951 said:
I'm on stock A12 TMO LE2127 rooted using magisk and unlocked bootloader. An app I use will not run under this state unless I add it to the magisk deny list. I am widevine L1.
Click to expand...
Click to collapse
Well this app was working but I had accidently uninstalled magisk and it detected unlocked boot loader and banned me for 2 days , it really costs a lot lol and my exams are coming so to be on a safe side and to prep using my phone (which I was avoiding ) I have locked the boot loader now . Using msm tool to go to a11 gives drm L1 , I have a question should I factory reset after going from a11->a13 and also will it keep L1 after reset ?
Vic36 said:
Well this app was working but I had accidently uninstalled magisk and it detected unlocked boot loader and banned me for 2 days , it really costs a lot lol and my exams are coming so to be on a safe side and to prep using my phone (which I was avoiding ) I have locked the boot loader now . Using msm tool to go to a11 gives drm L1 , I have a question should I factory reset after going from a11->a13 and also will it keep L1 after reset ?
Click to expand...
Click to collapse
If using stock roms all the way to A13, which is the best way to go, you should be ok. You should be at L1 then.
Wildvine level is a complete crap shoot when you unlock the bootloader. Other threads are out there where many of us followed the exact same steps and some had L3 and some L1. I have yet to retain L1 once I unlocked the BL and rooted. Usually relocking it will put you back on L1. Some have reported having to relock it and reset the device. YMMV.
Had L1 after msm a11 , but it has now changed to L3 on C.66 . Any solution guys ?
Vic36 said:
Had L1 after msm a11 , but it has now changed to L3 on C.66 . Any solution guys ?
Click to expand...
Click to collapse
Steps you took after msm'd a11?
TheGhost1951 said:
Steps you took after msm'd a11?
Click to expand...
Click to collapse
Just updated as they appeared in system updates .
1. was a 400 mb update(L1)
2. C.47(L1)
3. C.60(L1)
4. C.66 (L3)
Vic36 said:
Just updated as they appeared in system updates .
1. was a 400 mb update(L1)
2. C.47(L1)
3. C.60(L1)
4. C.66 (L3)
Click to expand...
Click to collapse
You might try a factory reset. I know others going through updates and such said factory resetting helped solve the problem...
TheGhost1951 said:
You might try a factory reset. I know others going through updates and such said factory resetting helped solve the problem...
Click to expand...
Click to collapse
no luck , gonna try updating to a13 . Any other solution ?
Vic36 said:
no luck , gonna try updating to a13 . Any other solution ?
Click to expand...
Click to collapse
Not that I can think of, sorry....
Gonna update to a13 and see if I get L1/ my app works else will roll back to a11 and stay there until my exam finishes lol and install custom rom after that.
TheGhost1951 said:
Not that I can think of, sorry....
Click to expand...
Click to collapse
Np , thanks for the help . I am gonna update to a13 and see if I get L1/ my app works else will roll back to a11 and stay there until my exam finishes lol and install custom rom after that.