Hello ive updated to the latest mcu available for
Mcte_gs and mow i can use the rgb led light for panel
It used to work when i turned on the car head light
Now its not responding
But if i go to choose color it turnes on
After i choose its turns off
Any fix available?
Related
Is there a way to get the notification light to blink all the colors it gives me as far a options b/c it only blinks red & no other colors? I have went through the stock text app, handcent, email to change the settings but they all blink as red.
I tested this yesterday and recommend Light Flow from the market.. there is a lite version that's free and you can test out the LED light. We only have Red, Blue, and a combination of both of them that looks like Magenta. You have to set it to Green in the app for Magenta..
I saw another post on this, but couldn't get it to blink at a regular rate. No matter how I changed the flash led setting, it would stay lit for a long time and eventually blink, only to resume again. Do you have settings that allow it to flash quicker?
Thanks.
I tried the light flow app which it worked to get the light to flash but none of the colors worked but some how it disabled my email notification light.
I have a new Huifei/Kaigele model KGL-7005,(one with the motorized screen).The button lights are currently red but will not change.If the red slider is reduced to zero,there is no lights.The blue and green sliders have no effect.The unit is meant to have adjustable colours. It is running MCU -KGL3 2.84. ROM is Malaysk 4.4.4 17022016. RGB is enabled in factory settings.It is the same with keylights on or off.Does anyone have any ideas what the problem is? What am I overlooking?
Did you check inisde factory how it is set up leds? jsut be sure it is on RGB value... perhaps you are on R value just... (Code for enter is 126)
Same as my head unit my car light is red and my head unit buttons light is red same as car lights i guess there is no rgb bulb inside the device thats why only one color
What he said.
Some head units do not have RGB button colors. It's cheaper to use only one color, so that's what is typically done.
I had a Pioneer radio in another vehicle I got rid of which had RGB backlighting on the buttons. You could set it to slowly cycle / phase through the colors as you'd ride along. As that's a "premium" stereo, they put extra bells and whistles in that one, but not so with some of these android units, unfortunately.
Hi,
I have recently bought an RK3188 Unit (KLD6) and am happily running Malayks ROM on it. However, when I switch on the lights of the car, the unit lowers the brightness of the screen. As I have to use lights during day in some parts of Europe, I would like to manage the brightness of the screen by an app. If it is a bright day and I have to drive with lights switched on, I can barely read the screen anymore. So is there any way to prevent this behavior? I know that I could just remove the lights wire, but I would like to have the LEDs to be switched on or off with the lights.
In case of Mtcd devices such option is in Factory Settings (password to enter it is 126). You can check it in case of your unit. I had the same problem - in my country it is mandatory to use head lights 24h per day so I lost screen visibility during the day.
Thanks for your answer. However, I wasn't able to find any option to turn off the brightness control. Do you remember how it was labeled/called? I found the option to turn on the LEDs permanently and also brightness control for reverse driving, but no option for the brightness with lights switched on.
Thanks in advance.
I found the solution, which obviously was too obvious to be found beforehand by myseld. :/ The normal system settings menu provides a tab 'Display', in which the brightness can be set as 'auto', 'light', and 'Dark', whereas 'Auto' means that the brightness depends on the status of the car lights, 'Light' means bright and 'Dark' means lower brightness.
I am trying to figure out the front panel button illumination in the factory settings. I do have the "illumination" wire connected and is working fine when I set the trigger to sense the lights. But what I really want is that the panel lights turn on when the deck turns on, and I believe I change the trigger to "power". But this seems to not work and when I turn on my car lights the panel will the then illuminate (even when set to "power") . Besides changing the illumination wire to acc is there a setting that I am missing here?
I've been running LED Blinker Pro for about a year now. It allowed me to set the LED to different colors for texts, missed calls, upcoming appointments, and a host of other things (Signal messages, Facebook messages, low battery etc...) and a user selectable blink rate compared to stock.
Recently, possibly after updating to Pie, things with the LED have changed. Now, when I am charging the phone, the LED goes solid red. When the battery is full, the LED goes solid green. The LED blinks a slow blue when Bluetooth in on. Basically it's doing things I don't want it to do, and it overpowers my own app, rendering it mostly unusable. I uninstalled LED Blinker Pro to see if there was an issue with that app, but the new LED issues remain
I looked throughout the phone's settings, but I cannot find where these "new" LED notification settings are. I'd like to turn them off, and have everything controlled by the app I paid for. I did find a toggle under Settings>Apps & notifications>Notifications>Blink LED, but that turns the LED "off" so that there's no blinking at all, with both the "new" LED features and the paid app. But, I do not want the LED totally off, I just want to be able to control it like I have been able to do over the past year.
Is this new LED blinking function a function of PIE? Has anyone figured out how to change settings for it? Can it be disabled so that I can use my own app to control the LED?