Can any body share there own Oneplus 7t persist partition form the Root directory( Root>mnt> vendor>parsist) files to fix fingerprint enrollment, screen brightness and microphone issues caused by broken persist partition on the OnePlus 7t.
Thanks in advanced,
Same here! I also need that
See your other post
Related
Hi everyone, first of all, thanks for being such nice community!
I've just received my new Mi5S, played with it for a bit and flashed xiaomiu.eu stable (because I was told to not use the 'fake' banggood global rom) , then flashed the latest xiaomi.eu dev (Android 7.0, I guess).
Everything was fine, but I tried to use the fingerprint sensor and it works very poorly, having to press more than 100 times to setup my finger, and then, it was very inconsistent to unlock.
I've tried many roms to try to understand the problem: Ressurection Remix, Xiaomi Global Stable 7.5.25 (using TWRP, flashing over "fake banggood global rom"), all have the same issue.
My question are...
Can i fix it flashing the global xiaomi image fastboot? (Maybe it's a corrupt/incompatible fingerprint firmware?)
Is there any difference from using TWRP and flashboot to flash? (I couldn't install the stable ROM after installing the dev, in order to downgrade, i restored my backup from 'fake banggood global rom', and then flashed xiaomi.eu stable // maybe the .zip doensn't come with all firmware? //
Will my bootloader LOCK if i flashboot? (my phone came unlocked from banggood).
Maybe my sensor is faulty? I guess it was working with the "banggood fake rom", but I tested briefly (it unlocked a few times, at least).
Sorry my english!
This is normal. We need to wait for Xiaomi to fix it.
I saw your post on Xiaomi eu too ?
Fingerprint for mi5s is well optimized now, it only takes 0.5 sec for me to unlock. Try to update your rom.
Well, try to record your finger horizontally.
For detailed how to, check this post http://en.miui.com/thread-439364-1-1.html
Try different techniques when registering your Fingerprint. I found applying a tiny amount of pressure on the sensor worked best for me. You don't need to press it you just have to make sure your skin is flattened on the surface.
Also a mistake I found when I saw my friend registering his fingerprint was he was registering around the center of his thumb, while in practice he used the tip of his thumb.
If done correctly I can unlock my phone scanning my thumb vertically or horizontally even though I registered it only vertically.
Try to install ZCX TWRP, mount persist partition, go to persist through TWRP file manager and rename fingerprint folder to fingerprint-old, after that, as I think, wipe needed.
Same here, have Mi 5s with MIUI 8.0.3.0 (MAGMIDI), received update to 8.5.3.0 (MAGMEID). Was happy to finally receive some update, but everything is pretty much the same. Hoped at least that the fingerprint sensor will perform a little better, but until now its even worse, doesn't respond at all. This **** sensor piss me off, before this phone I used fingerprint all the time... We get zero support from Xiaomi about this fingerprint sensor!! This is my first and last Xiaomi mobile device..
Anyway before reading this thread I considered installing different roms , maybe this stable one from Xiaomi.eu : xiaomi.eu_multi_MI5S_V8.5.3.0.MAGCNED_v8-6.0.zip
But in my understanding that didn't solve it for you, right?
quarvin said:
Same here, have Mi 5s with MIUI 8.0.3.0 (MAGMIDI), received update to 8.5.3.0 (MAGMEID). Was happy to finally receive some update, but everything is pretty much the same. Hoped at least that the fingerprint sensor will perform a little better, but until now its even worse, doesn't respond at all. This **** sensor piss me off, before this phone I used fingerprint all the time... We get zero support from Xiaomi about this fingerprint sensor!! This is my first and last Xiaomi mobile device..
Anyway before reading this thread I considered installing different roms , maybe this stable one from Xiaomi.eu : xiaomi.eu_multi_MI5S_V8.5.3.0.MAGCNED_v8-6.0.zip
But in my understanding that didn't solve it for you, right?
Click to expand...
Click to collapse
Yes, I've installed latest EU and it didnt fixed my fingerprint.. maybe we have faulty smartphones?
baron br said:
Yes, I've installed latest EU and it didnt fixed my fingerprint.. maybe we have faulty smartphones?
Click to expand...
Click to collapse
I've already solved the problem in my phone.
Look at this thread, hope will help you too:
https://forum.xda-developers.com/mi-5s/help/firmware-to-fix-fingerprint-sensor-t3653847
Good evening together,
I have opened a new topic so that we can do everything together regarding a fix for the fingerprinter.
This is known to be broken when we open the bootloader.
I really hope that together we can find out how we can fix this.
I once looked at all files between de Realme X and the X2.
Unfortunately, I have almost no discernible differences.
Thus, the fix of Realme for the X might also be in the bootloader itself.
Where Widevine is still set from L1 to L3.
Maybe you have an idea?
Up for this topic.
Try to fix fingerprint. Its available only for a17 ROM.
Flash in twrp or unpack and replace files by hands.
also may be need wipe dalvik-cashe.
Fingerprint FIX
djsven said:
Good evening together,
I have opened a new topic so that we can do everything together regarding a fix for the fingerprinter.
This is known to be broken when we open the bootloader.
I really hope that together we can find out how we can fix this.
I once looked at all files between de Realme X and the X2.
Unfortunately, I have almost no discernible differences.
Thus, the fix of Realme for the X might also be in the bootloader itself.
Where Widevine is still set from L1 to L3.
Maybe you have an idea?
Click to expand...
Click to collapse
after update to version V.13 Fp working with boot-loader unlocked ...
amit000in said:
after update to version V.13 Fp working with boot-loader unlocked ...
Click to expand...
Click to collapse
without fix? and what about security certifications instead?
proximity sensor stop working after flashing miui eu developer on redmi note 8
resolved after flashing persist img thx.
how did you flash the persist.img?
i'm having problems with all the sensors, proximity, gyroscope, lux
even though i´ve reinstalled the official global rom the problem stills there
mahmoud eqwa said:
resolved after flashing persist img thx.
Click to expand...
Click to collapse
can you check your drm info and tell me if you have "Widevine l1" or l3 please
use this app
DRM Info - Apps on Google Play
Shows DRM information (Widevine, PlayReady, etc) from Android DRM Framework
play.google.com
xandraco said:
how did you flash the persist.img?
i'm having problems with all the sensors, proximity, gyroscope, lux
even though i´ve reinstalled the official global rom the problem stills there
Click to expand...
Click to collapse
restore your persistbak.img using :
[Guide] About repairing/fixing the persist partition
Disclaimer: I am not responsible for the results of any of these operations. Everyone knows that the persist partition is responsible for sonsors and carrier network etc. Once this partition is failed or lost, your phone will go wrong. I just...
forum.xda-developers.com
or if you have root use "System Tools Android: All in one toolbox"
Hello,
I have the Redmi Note 8T.
The problem is simple to describe: No sensors are working. Gyro, brightness, nothing.
I've been experimenting with different ROMs before I ended up with crDroid 7.3 (which autoupdated to 7.4), and noticed almost right away that the brightness sensor didn't work. I tried LineageOS and then the modded MIUI thing before I ended up with crDroid which supported all of the camera's features out of the box.
How I flashed the current OS and other stuff:
-In TWRP, wipe everything but last two options
-Format
-Reboot
-In one go and in that order:
-crDroidAndroid-11.0-20210213-ginkgo-v7.3.zip
-BiTGApps-arm64-11.0.0-R20_signed.zip
-Magisk22
A couple of days ago the phone updated to crDroid 7.4.
I tried installing a couple of sensor debugging apps, none of them finds any sensor.
I'm not sure what other info to provide, and while I hope that is enough to help me find a solution for this, please don't hesitate to ask if anything else is needed.
Thank you, and stay safe and healthy!
EDIT:
After doing more research I tried flashing persist.img which I got from:
Redmi Note 8T – MIUI Download Xiaomi Official ROM
by following this guide:
https://c.mi.com/thread-2468496-1-0.html
I used the EEA fastboot image because I figured I need the EEA one since I bought the device in Germany.
I downloaded the app "Sensor Test" by Anfrey Efremov and the following things are green:
-Light (which works)
-Proximity (also works)
-Magnetometer (also works)
-Compass (doesn't do anything)
Red entries are:
-Accelerometer
-Gyroscope
-Barometer
Autobrightness seems to work now, unfortunately, autorotate doesn't.
I'm thinking maybe I should use a different persist image (from the global version), but reading up on this some people post warnings about rather not messing with the persist partition because things can go VERY wrong. Given that I must have messed up somewhere to end up in this position I bluntly assume I am disqualified from doing that without getting advice from you guys.
I have a quick question. As of the moment, the AOD stays for 10 second period on V12.5.5.0.RKOTWXM. There is no way to extend ot schedule it.
Is it the same on V13.0.1.0.SKOTWXM or it has been fixed?
I know that turning off the MIUI optimisation will make it permanent, but I can't attach files to gmail, viber ot whatsapp if the optimisation is off.
Thanks.
zhekozhekov said:
I have a quick question. As of the moment, the AOD stays for 10 second period on V12.5.5.0.RKOTWXM. There is no way to extend ot schedule it.
Is it the same on V13.0.1.0.SKOTWXM or it has been fixed?
I know that turning off the MIUI optimisation will make it permanent, but I can't attach files to gmail, viber ot whatsapp if the optimisation is off.
Thanks.
Click to expand...
Click to collapse
You can't in miui 13. But if you want to leave the AOD always on you can flash xiaomi.eu on it.
Here's a screenshot that i took myself.
zhekozhekov said:
I have a quick question. As of the moment, the AOD stays for 10 second period on V12.5.5.0.RKOTWXM. There is no way to extend ot schedule it.
Is it the same on V13.0.1.0.SKOTWXM or it has been fixed?
I know that turning off the MIUI optimisation will make it permanent, but I can't attach files to gmail, viber ot whatsapp if the optimisation is off.
Thanks.
Click to expand...
Click to collapse
I have RKOEUXM 12.5.8 and it's the same.
AFAIK, Xiaomi shorthned AOD for all (many?) phones to save battery, it's not specific to 11Lite 5G NE neither to MIUI 12.5 or MIUI 13
I use Magisk module, and it works with MIUI 12.5 but don't know if the module supports MIUI 13:
[MOD][Magisk][MIUI][v1.1]ALWAYS on display for Mi 10 Lite (monet)
Hi there! I made this Magisk module to enable more options to choose with the Always on display on monet and not only the annoying option of "10 seconds after tapping". Did it modifying the "AODSettings.smali" file inside an old AOD apk, where...
forum.xda-developers.com
With the module I have AOD set to be active 7AM - 24PM (screenshots attached)
Otherwise, see for Xiaomi.eu (MIUI 13) in the post above, but it is actually custom ROM (debloated CN), hence it also requires the unlocked Bootloader (like Magisk/root)
As of the moment I am with V12.5.5.0.RKOTWXM and will try with the Magisk module. I have it rooted.
Many thanks for the help. Cheers.
zgfg said:
I have RKOEUXM 12.5.8 and it's the same.
AFAIK, Xiaomi shorthned AOD for all (many?) phones to save battery, it's not specific to 11Lite 5G NE neither to MIUI 12.5 or MIUI 13
I use Magisk module, and it works with MIUI 12.5 but don't know if the module supports MIUI 13:
[MOD][Magisk][MIUI][v1.1]ALWAYS on display for Mi 10 Lite (monet)
Hi there! I made this Magisk module to enable more options to choose with the Always on display on monet and not only the annoying option of "10 seconds after tapping". Did it modifying the "AODSettings.smali" file inside an old AOD apk, where...
forum.xda-developers.com
With the module I have AOD set to be active 7AM - 24PM (screenshots attached)
Otherwise, see for Xiaomi.eu (MIUI 13) in the post above, but it is actually custom ROM (debloated CN), hence it also requires the unlocked Bootloader (like Magisk/root)
Click to expand...
Click to collapse
I confirm the v.1.1 of the Magisk module works perfectly with V12.5.5.0.RKOTWXM. The AOD could be always on, off or scheduled. Even the double tap to wake or turn off screen works. Many thanks for the help.
So, what is your solution to this useless 10s on display?
I tried a couple of 3rd party notification Apps but don't like them and there's security concerns.
I think neither 10s nor always is ideal. Notifications should be blinking for a certain period which can be set by user.
Any ideas other than rooting the phone?
For any rom, turning off miui optimization works for AOD to persist but consumes way more battery.
MIUI 13 turns that off. Nowhere to turn off MIUI optimization now.
Hi guys. I post my problem here, if someone could advise me for any solution.
I am using LineageOS 18.1 and i thought to try this module for AOD. Unfortunately, I had bootloops after that. I could pass MI Logo, but after loading the rom it reboots or loading forever.
I tried to delete the magisk modules, restore the original boot image, the saved magisk boot image that I had made, without luck. Moreover, I tried to dirty flash the rom, but it gets stuck on 47% and fail.
Also tried to pull files using adb, but it shows that the sdcard is empty. I believe that it happens due to encryption.
As I said, any advice would be welcome. The only thing that I need is to backup a few important files for me and then format everything.
Thank you.
zhekozhekov said:
I have a quick question. As of the moment, the AOD stays for 10 second period on V12.5.5.0.RKOTWXM. There is no way to extend ot schedule it.
Is it the same on V13.0.1.0.SKOTWXM or it has been fixed?
I know that turning off the MIUI optimisation will make it permanent, but I can't attach files to gmail, viber ot whatsapp if the optimisation is off.
Thanks.
Click to expand...
Click to collapse
have you been able t fix it?