Hello everyone, I bought my lenovo p2 last year and it was all working fine but for the past couple of months I have been facing some problems with the fingerprint gesture. Whenever I use it, it works fine for a few minutes but gets unresponsive after a while and when I touch it, it doesn't respond and sometimes I have the drag to the right to get it working. Is there any way that I can fix this? Thanks.
Facing the same problem but I think it can be made right to some extend by deleting the fingerprints and re-registrating would fix it
Mine is the same case too. My fingers leave marks on the scanner making it think that i didn't lift my finger up. Had to wipe it off everytime before using. Started happening aftet leaving stock rom.
Hi, I am a satisfied user of the global version of Redmi Note 5 Pro, but in recent days I have noticed an imprecision in reading touches on the screen, especially when the phone is staying on the table or on the bed.
The most annoying thing is that it doesn't take the swipe from the bottom edge of the screen and doesn't trigger the home gesture.
On the phone is installed MIUI Global 9.5.13.0 (OEIMIFA) Stable.
Anyone else noticed this issue?
Sorry for my bad English :silly:
Just tried it out (same version and also using full screen gestures) and everything was fine. Never had a problem going back to the home screen or recent apps while the phone was on a table.
Chris100115 said:
Hi, I am a satisfied user of the global version of Redmi Note 5 Pro, but in recent days I have noticed an imprecision in reading touches on the screen, especially when the phone is staying on the table or on the bed.
The most annoying thing is that it doesn't take the swipe from the bottom edge of the screen and doesn't trigger the home gesture.
On the phone is installed MIUI Global 9.5.13.0 (OEIMIFA) Stable.
Anyone else noticed this issue?
Sorry for my bad English :silly:
Click to expand...
Click to collapse
+1
As some of you guys might already know Redmi devices have Gyroscope issue but it get fixed with Calibration (in my case temporarily)
previously in Android pie, while playing pubg Gyroscope was working fine with no issue, but i had the issue with my gyroscope while charging where my aim was moving on its own even on a flat surface. but it used to happen while charging only (& my Gyroscope setting is always on with 190 sensitivity just for the info)
And now in Android 10 it happens after every 10, 15 minutes doesn't matter how many times i 've calibrated my device but it never get fixed permenantly.
But I know the temporarily solution:
About > All Specs >Tap 3 times on kernal version > Press on the top right corner & go to additional tools
Acc Calibration Tool:
Accelerometer ( not all values are zero) just calibrate your accelerometer, & your device should be on a flat surface
Gyroscope Calibration Tool:
Gyroscope (all values are zero but some are in (-ve) zero don't know why ?)
Calibrate Gyroscope - also device should be on a flat surface
check your Gyroscope issue with 'Compass app' and values should be constant on a flat surface
You can also use 'Gyroscope Test App'
in my case:
mine only gets fixed after calibrating and waiting for 20 seconds at least. i use Gyroscope test app to know whether my Gyroscope issue is fixed or not
and mine never get fixed after device reboot.
seems like this is the Hardware issue. i tried to hard reset changed rom to miui 12 came back to miui 11 but the issue is still there.
and calibration is the temporarily solution for me until i don't reboot my device.
didn't tried custom rom yet.
Did any of you guys have the similar issue, or any of you know how to fix it? Please Help!
Strange seems like no one is facing this issue
I am facing the same problem from past two days on my redmi note 8 pro . It can be fixed temporarily by rebooting the device . But after opening CIT by tapping kernel version my accelerometer is not showing anything it's blank
gkl1312 said:
I am facing the same problem from past two days on my redmi note 8 pro . It can be fixed temporarily by rebooting the device . But after opening CIT by tapping kernel version my accelerometer is not showing anything it's blank
Click to expand...
Click to collapse
Sorry to say that i cannot help ??
Facing the same issue. Screen doesn't rotate, accelerometer and gyroscope values are blank in CIT
On a steady table using the built in level function in the compass app was showing 1 degree (table not perfectly flat) for a couple of minutes and now it`s changed to 2 degrees and has been showing that for over five minutes, The only problem i have had is if i am on the home-screen in portrait mode with the phone on the table and click on my browser (opera) the screen will change to landscape mode, Then if i lift up the front of the phone the display will change to portrait mode, It does this with a few apps and it can be a pain, I could download a screen rotation all to fix the problem if i needed, So no major problems and i am not phone gamer, I prefer my 360 or PC
i hope this work for you
If your gyroscope is temporary work after restart you can fix it with my guide:
1.restart your device
2.open the cit test (multiple tap on kernel number)
3.calibrate your gyroscope in flat surface and make sure your gyroscope is still active
4.follow the other sensor calibration until you complete the compass calibration .
4.you can exit cit and check all your sensors
note:do this as fast as you can
Nouman112 said:
As some of you guys might already know Redmi devices have Gyroscope issue but it get fixed with Calibration (in my case temporarily)
previously in Android pie, while playing pubg Gyroscope was working fine with no issue, but i had the issue with my gyroscope while charging where my aim was moving on its own even on a flat surface. but it used to happen while charging only (& my Gyroscope setting is always on with 190 sensitivity just for the info)
And now in Android 10 it happens after every 10, 15 minutes doesn't matter how many times i 've calibrated my device but it never get fixed permenantly.
But I know the temporarily solution:
About > All Specs >Tap 3 times on kernal version > Press on the top right corner & go to additional tools
Acc Calibration Tool:
Accelerometer ( not all values are zero) just calibrate your accelerometer, & your device should be on a flat surface
Gyroscope Calibration Tool:
Gyroscope (all values are zero but some are in (-ve) zero don't know why ?)
Calibrate Gyroscope - also device should be on a flat surface
check your Gyroscope issue with 'Compass app' and values should be constant on a flat surface
You can also use 'Gyroscope Test App'
in my case:
mine only gets fixed after calibrating and waiting for 20 seconds at least. i use Gyroscope test app to know whether my Gyroscope issue is fixed or not
and mine never get fixed after device reboot.
seems like this is the Hardware issue. i tried to hard reset changed rom to miui 12 came back to miui 11 but the issue is still there.
and calibration is the temporarily solution for me until i don't reboot my device.
didn't tried custom rom yet.
Did any of you guys have the similar issue, or any of you know how to fix it? Please Help!
Click to expand...
Click to collapse
:::my note8 pro also has same issue
i also tried all the tricks, calibration and all stuff but it only worked temporarily. if i place my phone on flat surface, it stops moving for some minutes but starts moving again.
i even tried changing my miui version from global to indian varient but the problem is still on. these days when i press the phone on top left corner, the gyroscope moves even more faster and when i press it around middle, it starts moving in opposite direction but never stops. somewhere i have hheard that this may be due to hardware issue, because of heating.
Nouman112 said:
As some of you guys might already know Redmi devices have Gyroscope issue but it get fixed with Calibration (in my case temporarily)
previously in Android pie, while playing pubg Gyroscope was working fine with no issue, but i had the issue with my gyroscope while charging where my aim was moving on its own even on a flat surface. but it used to happen while charging only (& my Gyroscope setting is always on with 190 sensitivity just for the info)
And now in Android 10 it happens after every 10, 15 minutes doesn't matter how many times i 've calibrated my device but it never get fixed permenantly.
But I know the temporarily solution:
About > All Specs >Tap 3 times on kernal version > Press on the top right corner & go to additional tools
Acc Calibration Tool:
Accelerometer ( not all values are zero) just calibrate your accelerometer, & your device should be on a flat surface
Gyroscope Calibration Tool:
Gyroscope (all values are zero but some are in (-ve) zero don't know why ?)
Calibrate Gyroscope - also device should be on a flat surface
check your Gyroscope issue with 'Compass app' and values should be constant on a flat surface
You can also use 'Gyroscope Test App'
in my case:
mine only gets fixed after calibrating and waiting for 20 seconds at least. i use Gyroscope test app to know whether my Gyroscope issue is fixed or not
and mine never get fixed after device reboot.
seems like this is the Hardware issue. i tried to hard reset changed rom to miui 12 came back to miui 11 but the issue is still there.
and calibration is the temporarily solution for me until i don't reboot my device.
didn't tried custom rom yet.
Did any of you guys have the similar issue, or any of you know how to fix it? Please Help!
Click to expand...
Click to collapse
negative values are common like north0 east0 west-0 south-0, as referrence points of start and direction
I also have the same problem but it is on REDMI NOTE 10 PRO (INDIA VERSION sweetin), so can someone help us
I have been having a lot of problems with the Proximity Sensor on my MI10T 5G.
When raise the phone against my ear to take a call.. the display does not go off and i accidentally keep pressing mute and other buttons by mistake.. this has become a big problem.
Xiaomi has told me to do a complete factory reset once and set up my phone again and test it.
If it's still a problem, then could be a hardware issue.
But I searched and seen that many people are facing the same problem... Any solution out there ??
i was having that issues with the default google phone app at mi 10t pro.
i am using true phone now instead of google and i have 0 issues
I changed my poco f3 to pixel experience, everything working fine but I now after 3 days face some little flickers in screen screen (screen blinks) mostly when I open the apps. Then after few time it stops.
Is anyone else facing this issue, or any solution?
Asad798 said:
I changed my poco f3 to pixel experience, everything working fine but I now after 3 days face some little flickers in screen screen (screen blinks) mostly when I open the apps. Then after few time it stops.
Is anyone else facing this issue, or any solution?
Click to expand...
Click to collapse
if you have minimum refresh rate and 60 and maximum at 120 then that;s the culprit. Keep both at a120 and no more issues