Related
Hi,
My phone was problem proximity sensor. It's LG G3 with Fulmic ROM
I want to test sensor with hide menu. I go DEVICE TEST, MT and OK to AAT Device restart. The phone has Reboot and now LED red and blue blinking and I display message :crying::
F670 Secure booting error !
F670 Boot certification verify
F670 Cause Booting secure verify !
My phone have TWRP and i can access to TWRP
I am lost ! Have you got a solution for repair this ??
Thank you Thank you.
foxy44 said:
Hi,
My phone was problem proximity sensor. It's LG G3 with Fulmic ROM
I want to test sensor with hide menu. I go DEVICE TEST, MT and OK to AAT Device restart. The phone has Reboot and now LED red and blue blinking and I display message :crying::
F670 Secure booting error !
F670 Boot certification verify
F670 Cause Booting secure verify !
My phone have TWRP and i can access to TWRP
I am lost ! Have you got a solution for repair this ??
Thank you Thank you.
Click to expand...
Click to collapse
You need to install Mr.Bump (click on it to download it) and move it to your Phone (Go to TWRP,connect your phone with your PC,move the file to your phone)Then click install and select "Mr.Bump.zip" file.
Greetings.
I test This
Ok, Very thank Sotiris02. I try this.
I can copy file in my SD card too and I copy use TWRP in my phone. It's possible too ? It's is the same ?
foxy44 said:
Ok, Very thank Sotiris02. I try this.
I can copy file in my SD card too and I copy use TWRP in my phone. It's possible too ? It's is the same ?
Click to expand...
Click to collapse
Thank you, but is not ok.
I put Mr.Bump (i copy on internal storage), ans execute by install TWRP. This install is OK and reboot automtically . But, after, the phone has exactly the same message !
foxy44 said:
Thank you, but is not ok.
I put Mr.Bump (i copy on internal storage), ans execute by install TWRP. This install is OK and reboot automtically . But, after, the phone has exactly the same message !
Click to expand...
Click to collapse
Backup your data of the current ROM and do a full wipe.
If the same thing happens,reflash the ROM.
Sotiris02 said:
Backup your data of the current ROM and do a full wipe.
If the same thing happens,reflash the ROM.
Click to expand...
Click to collapse
Hi, I try dirty install (my ROM is Fulmics), same problem
You say Full Wipe, what exactly : Dalvik / ART cache + System + Data + Cache : same problem
I try too, a backup nand TRWP : same problem
I think that i must flashtools method (TOT, KDZ ect ...) : https://forum.xda-developers.com/lg-g3/general/guide-boot-recovery-download-mode-t3273824
This is only way ?? (
foxy44 said:
Hi, I try dirty install (my ROM is Fulmics), same problem
You say Full Wipe, what exactly : Dalvik / ART cache + System + Data + Cache : same problem
I try too, a backup nand TRWP : same problem
I think that i must flashtools method (TOT, KDZ ect ...) : https://forum.xda-developers.com/lg-g3/general/guide-boot-recovery-download-mode-t3273824
This is only way ?? (
Click to expand...
Click to collapse
Well if you tried Flashing MR.Bump and nothing worked,the only way is to go back to stock.
Sotiris02 said:
Well if you tried Flashing MR.Bump and nothing worked,the only way is to go back to stock.
Click to expand...
Click to collapse
I tried with Custom ROM "Sexy Mode 30F" 5ROM Stock) by TWRP, it's same problem. For you, back to stock with TOT or KDZ method ?
foxy44 said:
I tried with Custom ROM "Sexy Mode 30F" 5ROM Stock) by TWRP, it's same problem. For you, back to stock with TOT or KDZ method ?
Click to expand...
Click to collapse
KDZ method will do the work.
Sotiris02 said:
Well if you tried Flashing MR.Bump and nothing worked,the only way is to go back to stock.
Click to expand...
Click to collapse
Sotiris02 said:
KDZ method will do the work.
Click to expand...
Click to collapse
OK, very thanks. I try this and i'll give my answer
foxy44 said:
OK, very thanks. I try this and i'll give my answer
Click to expand...
Click to collapse
If you have access to TWRP you can also directly flash a custom ROM as well.
You just need to format everything without the internal storage first.
engmia said:
If you have access to TWRP you can also directly flash a custom ROM as well.
You just need to format everything without the internal storage first.
Click to expand...
Click to collapse
Thank, but i already flash with custom ROM with format / clear dalvik , cache, data and system. This is a same issu: 670 error blingking red/blue ??
Solve
foxy44 said:
Thank, but i already flash with custom ROM with format / clear dalvik , cache, data and system. This is a same issu: 670 error blingking red/blue ??
Click to expand...
Click to collapse
Hi,
I solve my problem
Thank you Sotiris02 and thank the fabulous forum :angel:
My issue : I use KDZ method with my country KDZ ROM : https://forum.xda-developers.com/lg-g3/general/guide-boot-recovery-download-mode-t3273824
Hello any help would be much appreciated.. Looking for a link to root my mi max it's running the latest version global 8.2.01 stable if anyone could point me in the right direction I'd be well grateful... Thanks ????
I have same issue that my mi max was updated to latest Mi developer rom which is Android 7 and I have lost my root privileges, even I can not downgrade to old version that I've backed up in twrp. I can't log in to twrp and my own language was gone in latest rom, please someone help me to guide us for rootting, thanks in advance.
What ever way I try I just cannot put twrp recovery on my phone bootloaders unlocked tried 4 different ways... It's driving me crackers!!!
denny1970 said:
What ever way I try I just cannot put twrp recovery on my phone bootloaders unlocked tried 4 different ways... It's driving me crackers!!!
Click to expand...
Click to collapse
Hi, sure way for me to install recovery it`s just put your recovery image in adb folder placed preferred in main drive, in my case disk c:, rename recovery with this name to simplify operation and reboot your device to fastboot mode (pressing vol- and pwr and open a terminal windows in your pc with right click mouse and shift at same moment, write to verify device is recogniced; fastboot devices, then write; fastboot flash recovery recovery.img. At second chance you have a tool flasher that works ever for me https://forum.xda-developers.com/mi...-xiaomi-twrp-flasher-mauronofrio-win-t3405207
tinkko said:
I have same issue that my mi max was updated to latest Mi developer rom which is Android 7 and I have lost my root privileges, even I can not downgrade to old version that I've backed up in twrp. I can't log in to twrp and my own language was gone in latest rom, please someone help me to guide us for rootting, thanks in advance.
Click to expand...
Click to collapse
I've read that upgrading to the beta can re-lock your bootloader. So, first check if your bootloader is locked, and if so just unlock using the same process as before. Your Mi Account should still have unlock privileges
MikusP said:
I've read that upgrading to the beta can re-lock your bootloader. So, first check if your bootloader is locked, and if so just unlock using the same process as before. Your Mi Account should still have unlock privileges
Click to expand...
Click to collapse
Thanks, will check for it, cheers
---------- Post added at 08:04 PM ---------- Previous post was at 07:57 PM ----------
denny1970 said:
What ever way I try I just cannot put twrp recovery on my phone bootloaders unlocked tried 4 different ways... It's driving me crackers!!!
Click to expand...
Click to collapse
Try this link: I can log into TWRP and installed SuperSU but Wifi doesn't work, can't turn on, No SIM shows in status bar, in latest Mi Developer ROM, now I am going back to Android 6 version,
SubwayChamp said:
Hi, sure way for me to install recovery it`s just put your recovery image in adb folder placed preferred in main drive, in my case disk c:, rename recovery with this name to simplify operation and reboot your device to fastboot mode (pressing vol- and pwr and open a terminal windows in your pc with right click mouse and shift at same moment, write to verify device is recogniced; fastboot devices, then write; fastboot flash recovery recovery.img. At second chance you have a tool flasher that works ever for me https://forum.xda-developers.com/mi...-xiaomi-twrp-flasher-mauronofrio-win-t3405207
Click to expand...
Click to collapse
Yeah did all the above mate finds the phone and when type the other part in it just says failed to load recovery image or something like that...
denny1970 said:
Yeah did all the above mate finds the phone and when type the other part in it just says failed to load recovery image or something like that...
Click to expand...
Click to collapse
It`s your bootloader is unlocked you don`t must have any issue with this, some screenies to look at
Mine does all of your screen shots It's the last screen shoot yours looks OK mine says fail.... To load recovery image....
denny1970 said:
Mine does all of your screen shots It's the last screen shoot yours looks OK mine says fail.... To load recovery image....
Click to expand...
Click to collapse
can you upload your last screenie? did you try with tool in the link posted?
Check if your bootloader status is indeed unlocked, some rom & using miflash can let your bootloader relock again.
Use
fastboot oem device-info
in adb command to check
used the tool it works but i dont have the twrp password and wont even boot back up to normal ????
cant get off the mi logo ,,,i can get in to fast boot and flash twrp but dont seem to work ..how can i restart me phone
denny1970 said:
used the tool it works but i dont have the twrp password and wont even boot back up to normal ????
cant get off the mi logo ,,,i can get in to fast boot and flash twrp but dont seem to work ..how can i restart me phone
Click to expand...
Click to collapse
No, password is just to decrypt data, don`t worry for that, just slide and go on, if you loosed your data, do a format data to decrypt and never more twrp will ask for password
SubwayChamp said:
can you upload your last screenie? did you try with tool in the link posted?
Click to expand...
Click to collapse
i usedthe tool but hit a problem...im stuck on the mi logo after i come out of twrp the phone wont boot and i dont have the twrp password
SubwayChamp said:
No, password is just to decrypt data, don`t worry for that, just slide and go on, if you loosed your data, do a format data to decrypt and never more twrp will ask for password
Click to expand...
Click to collapse
ive done a factory wipe and format data its still on the mi logo not sure if ive killed the phone
denny1970 said:
i usedthe tool but hit a problem...im stuck on the mi logo after i come out of twrp the phone wont boot and i dont have the twrp password
Click to expand...
Click to collapse
Go to recovery again with hw keys, don`t worry for password, just xiaomi knows, it`s not relevant, when ask for just slide and go main menu, format data (only data) and mount system, then reboot normally. I don`t know if factory reset probably you delete your system, if this is so flash again rom and then supersu
SubwayChamp said:
Go to recovery again with hw keys, don`t worry for password, just xiaomi knows, it`s not relevant, when ask for just slide and go main menu, format data (only data) and mount system, then reboot normally. I don`t know if factory reset probably you delete your system, if this is so flash again rom and then supersu
Click to expand...
Click to collapse
Thanks for the reply...... I flash the original rom all sorted now thanks maybe twrp is not for me lol way to many problems for me...
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
How to install:
1. Unzip
2. Install fastboot tools from google's sdk on your PC
3. Enter fastboot mode on device
4. Unlock your bootloader
5. Run "fastboot flash recovery jason_twrp_recovery.img" via command line
6. Reboot
Download:
https://www.androidfilehost.com/?fid=890129502657588556
Device Tree:
https://github.com/travismills82/android_device_xiaomi_jason
ROOT OPTIONS:
SuperSU: https://forum.xda-developers.com/app...v2-05-t2868133
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Nice one buddy, works with every ROM out there
i tried it out with those ROMs:
Miui CN Dev latest
Miui Stable latest
Miui Global latest
EpicROM
MultiROM
Miui EU ROM Dev/Stable
MiuiPro/Miuisu/Miuigr
FlymeOS
LOS
Mokee latest
is this latest twrp?
Vihru said:
is this latest twrp?
Click to expand...
Click to collapse
Its Twrp 3.2.1.0
Vihru said:
is this latest twrp?
Click to expand...
Click to collapse
Yeah its
thanks, please fix Decrypt Data
not working. after flash, the twrp doesn't show anything (and it doesn't keep settings)
pepote666 said:
thanks, please fix Decrypt Data
Click to expand...
Click to collapse
Wipe then Format Data, is the first thing to do after flashing twrp, make sure to backup first
FenerKR said:
not working. after flash, the twrp doesn't show anything (and it doesn't keep settings)
Click to expand...
Click to collapse
Wipe then Format Data, is the first thing to do after flashing twrp, make sure to backup first
AL_IRAQI said:
Wipe then Format Data, is the first thing to do after flashing twrp, make sure to backup first
Wipe then Format Data, is the first thing to do after flashing twrp, make sure to backup first
Click to expand...
Click to collapse
Why this issue not happen with other twrp? The internal storage show 0 bytes
nowforever said:
Why this issue not happen with other twrp? The internal storage show 0 bytes
Click to expand...
Click to collapse
because you have to wipe your storage first
AL_IRAQI said:
because you have to wipe your storage first
Click to expand...
Click to collapse
So, It's means I will lost all my data on phone? including external storage?
nowforever said:
So, It's means I will lost all my data on phone? including external storage?
Click to expand...
Click to collapse
Hmm, yeah for the first time only, or you could boot up to system and backup everything
Can´t start session. RPC ERROR
Thank you!!!
Molgorth said:
Can´t start session. RPC ERROR
Thank you!!!
Click to expand...
Click to collapse
Im sorry i didnt get you, where did you get that error ?
i already have twrp on my phone, some turkish version with awful orange theme, is there a way for me to flash this one without reseting my system and data?
connta said:
i already have twrp on my phone, some turkish version with awful orange theme, is there a way for me to flash this one without reseting my system and data?
Click to expand...
Click to collapse
Yeah, just flash it over the old one, no need to touch system or data
First time I started twrp they would that I enter a password for data partition.
Which password is there required?
digitaliban said:
First time I started twrp they would that I enter a password for data partition.
Which password is there required?
Click to expand...
Click to collapse
Enter your system password, if it didnt work you have to format, but backup data first
Thanks for this TWRP, work perfect!
I need also to enter password and I don't have encrypted phone. Plus I had already installed twrp installed, so this image has something... not working.
Introduction
This is a TWRP 3.2.1 build based on an oreo kernel which seems to be required for the oreo firmware of the H930. Currently Im using the kernel from my stock based ROM. In future updates (when i have the time for it, and if its needed) might make it smaller, by removing things like network, wifi and so on drivers. But for now, it works.
The name of the device (which it also checks for if you flash a ROM that has an assert so you wont flash it on the wrong device) is "joan", as thats the official codename of all V30s (inclduing V30S). I decided to that because I want to unite the H930 and US998 development, as the US998 seems to have no problems with H930 roms/kernels.
Bugs/Features
Its basically the same as this TWRP, just newer TWRP version (3.2.1 instead of 3.1.1), newer kernel, and renamed device.
So please for things that dont work go over there. I maybe plan to fix a few things here and there, but its really low priority for now.
Download
Use the one from this post: https://forum.xda-developers.com/showpost.php?p=77828489&postcount=153
FAQ
Why is there now a third TWRP Thread?
The old recoverys dont boot on the new Oreo firmware. This is an updated version that boots on it.
Will this work with the nougat firmware too?
I havent tested it, but it should work, as it uses the same kernel as my korean oreo port.
Whats so special about the Treblelized version?
It can mount/backup/wipe vendor, also flash an image to /vendor. Thats basically it.
Can I flash a treblelized ROM with the normal TWRP?
Yes, you can. You just need the treblelized TWRP if you want to (nativly) mount vendor, or if you want to backup/wipe vendor.
Can't everyone just use the treblelized version?
It's specially intended for people who have repartitioned! You can try, but idk what happens on phones that arent repartitioned, and you use this. Beware of unexpected behaviour!
Sources:
https://github.com/SGCMarkus/android_device_lge_joan-twrp
https://github.com/SGCMarkus/android_kernel_lge_msm8998
XDA:DevDB Information
TWRP - Joan, ROM for the LG V30
Contributors
SGCMarkus
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Alpha
Created 2018-04-18
Last Updated 2018-04-18
I get access denied when i go to to your afh link.
Thank you! Can you check dl link because it req. to login ;/
Jerry08 said:
I get access denied when i go to to your afh link.
Click to expand...
Click to collapse
Dizzyrul3z said:
Thank you! Can you check dl link because it req. to login ;/
Click to expand...
Click to collapse
fixed... wrong link in the clipboard lol
If it's not problem for you, can you made a flashable zip for TWRP?
Dizzyrul3z said:
If it's not problem for you, can you made a flashable zip for TWRP?
Click to expand...
Click to collapse
You can flash an image through TWRP too if you want to update your old one.
In the install menu, switch from "Install zip" to "Install image" (bottom right it was i think)
Damn I did not know that we lern all the time waiting for your rom to flash in twrp and we all be happy
maybe a stupid question, but must I flash before the no-verity-opt-encrypt-6.0.zip ?
kherio said:
maybe a stupid question, but must I flash before the no-verity-opt-encrypt-6.0.zip ?
Click to expand...
Click to collapse
Depends on the rom youre using. the Custom Stock based ones have disabled verity/force encryption already built in what i know. If youre using pure stock, you need to do that once (after you change the boot image).
E.g.
Flash stock rom via kdz -> flash recovery -> format data (if it should be encrypted and twrp cant read it) -> flash no verity-opt encrypt -> flash lrcd (or whatever its called, service that checks if you have root or not) -> flash magisk or so -> setup rom
Thats how i did it, but that doesnt really have todo anything with the recovery itself
Flashed fine from within TWRP. Now waiting for the new Oreo, I'm running the Korea ROM on my unlocked US998.
TWRP
Sorry but I must be doing something wrong or there is a bug as when I install TWRP and I try to access it no matter what I do it always erases everything.
Please let me know if I am doing something wrong.
Thanks
etheodor said:
Sorry but I must be doing something wrong or there is a bug as when I install TWRP and I try to access it no matter what I do it always erases everything.
Please let me know if I am doing something wrong.
Thanks
Click to expand...
Click to collapse
What do you mean by "it erases everything"?
What are the steps you use when you install it?
etheodor said:
Sorry but I must be doing something wrong or there is a bug as when I install TWRP and I try to access it no matter what I do it always erases everything.
Please let me know if I am doing something wrong.
Thanks
Click to expand...
Click to collapse
try after you flash it with "fastboot flash recovery xxxxxxxxxxx.img"
to use this "fastboot boot xxxxxxxxxxx.img"
the way taht i managed to acces it is like this
- flash twrp
- power off phone (DO NOT power it on to enter in its rom)
- press power and volume down
- wait for the first "LG V30 ThinQ" logo to appear
- while i HOLD volume down i let the power button go then press it again
- the black text on white background will appear before the screen which says that you have your bootloader unlocked
- select yes using volume buttons
- press power
- then select yes again
- press power and that's it, just wait and it will enter in recovery
can i flash this in korean model v300s ?
seloka180 said:
can i flash this in korean model v300s [emoji848]
Click to expand...
Click to collapse
No, unless you have a way to unlock the bootloader on the v300s -- and have fastboot flash commands.
Sent via open market LG US998 V30/V30+
TWRP
iRS_ said:
try after you flash it with "fastboot flash recovery xxxxxxxxxxx.img"
to use this "fastboot boot xxxxxxxxxxx.img"
the way taht i managed to acces it is like this
- flash twrp
- power off phone (DO NOT power it on to enter in its rom)
- press power and volume down
- wait for the first "LG V30 ThinQ" logo to appear
- while i HOLD volume down i let the power button go then press it again
- the black text on white background will appear before the screen which says that you have your bootloader unlocked
- select yes using volume buttons
- press power
- then select yes again
- press power and that's it, just wait and it will enter in recovery
Click to expand...
Click to collapse
Thanks very much for the reply. I have tried this exact procedure but after the second yes it erases everything on my phone, and I tried this more than once.
What I have not tied is the "fastboot boot xxxxxxxxxxx.img" I will try this too and see what happens. I will let you know. Thanks again.
---------- Post added at 05:57 AM ---------- Previous post was at 05:36 AM ----------
etheodor said:
Thanks very much for the reply. I have tried this exact procedure but after the second yes it erases everything on my phone, and I tried this more than once.
What I have not tied is the "fastboot boot xxxxxxxxxxx.img" I will try this too and see what happens. I will let you know. Thanks again.
Click to expand...
Click to collapse
I can confirm that "fastboot boot xxxxxxxxxxx.img" is working on my V30 but NOT the key combination
etheodor said:
Thanks very much for the reply. I have tried this exact procedure but after the second yes it erases everything on my phone, and I tried this more than once.
What I have not tied is the "fastboot boot xxxxxxxxxxx.img" I will try this too and see what happens. I will let you know. Thanks again.
---------- Post added at 05:57 AM ---------- Previous post was at 05:36 AM ----------
I can confirm that "fastboot boot xxxxxxxxxxx.img" is working on my V30 but NOT the key combination
Click to expand...
Click to collapse
the key combination can be rather tricky, and you need a pretty good timing for it too, i rarely manage it on the first try ?
TWRP
SGCMarkus said:
the key combination can be rather tricky, and you need a pretty good timing for it too, i rarely manage it on the first try
Click to expand...
Click to collapse
I see, this is not a problem I would rather use the fastboot command which is more safe that the key combo.
Thanks very match for your help
the key combo sometimes tricked me because the twrp was not properly installed and i ended up erasing everything... i always use fastboot command or TWRP official app to reboot in recovery. those are the safest procedures
Not sure how so many people are having issues with the key combination, it is very easy to do. I have updated to Oreo and have unlocked, installed twrp and rooted it successfully first try.
1. Hold both volume down and power until you see the first logo
2. Let go of power while still holding volume down
3. Press and hold down power again, along with volume down
4. You will be on a white screen
5. Choose yes and yes, you have to do this erase procedure twice
6. After the second erase you should now see the twrp splash screen
That is exactly how i did it and it was successful on the first try. I have tried same procedure again 4 times since and have don 2 of my friends phones, all worked perfectly first time
we got android 12 update....
is this the final update or will there be a android 13 update too?
Finally we could play this phone soon. Although i have m62 . Tks u so
tiennhu89 said:
Finally we could play this phone soon. Although i have m62 . Tks u so
Click to expand...
Click to collapse
rc chanu said:
YOU CAN GIVE IT A TRY FOR M62 TOO!
Click to expand...
Click to collapse
Yeah. Will wait for some mod roms too
Custom rom builts for gaming with good kernels & therma
Thanks for that! Is data backup working on this release?
ilya33 said:
Thanks for that! Is data backup working on this release?
Click to expand...
Click to collapse
Nope
Sushrut1101 said:
Nope
Click to expand...
Click to collapse
Thanks. Any hope/intent to fix this twrp so data backup can work? otherwise what is the point of having twrp?
ilya33 said:
Thanks for that! Is data backup working on this release?
Click to expand...
Click to collapse
No. still in beta
Is a custom kernel being made or is it only gsi for this phone?
MfmeheyitsmeIam said:
Is a custom kernel being made or is it only gsi for this phone?
Click to expand...
Click to collapse
gsi for now and that too on beta stage
rc chanu said:
View attachment 5521321TWRP FOR SAMSUNG GALAXY F62/M62 (EXYNOS 9825) (*M62 UNTESTED)
Team Win Recovery Project 3.x, or Twrp3 for short, is a custom recovery built with ease of use and customisation in mind. It's a full touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
TWRP built for the Samsung Galaxy F62. It should work fine, but using it is a try at your own risk procedure. Your bootloader must be unlocked to use this recovery. SAMSUNG ODIN is used to flash this recovery.
Downloads:Modified boot img
AVB Disabled vbmeta
TWRP Recovery
Multidisabler F62 (removes encription)
Installation (Odin Windows)Prerequisites: Samsung USB drivers, ODIN
If you already have the bootloader unlocked you can skip to step 6.
* Please be aware all your data will be erased including internal storage and phone will reboot!!
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
Download TWRP RECOVERY from above.
Download AVB Disabled VBmeta from above,
Flash the modified boot.tar in AP Section of odin.
after flashing boot now restart the download mode by using 8 method.
now put the modified vbmeta.tar in USER section of odin and flash it. - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
After following the above step, boot to stock recovery of android by Use vol up + power + usb cable plugged to a pc and there perform a factory reset. THIS WILL EARSE YOUR DATA.
After performing factory reset, boot to download mode by Use vol up + vol down + usb cable plugged to a pc and now put the downloaded TWRP RECOVERY.TAR in AP section of odin and flash.
THAT'S IT YOU WILL HAVE A TWRP RECOVERY.
******You can always revert to stock by flashing full frimwere with odin.
IMPORTANT STEP TO MAKE TWRP MOUNT PARTITIONS
In TWRP home screen press wipe - format data - yes
Download multidisabler.zip from above and flash. It will disable security and encryption.
Credits : EncriptedHibiscus In guidance with Sushrut1101
Click to expand...
Click to collapse
Thanks for your effort. Waiting for the stable recovery and development of custom kernels and roms
ilya33 said:
Thanks for that! Is data backup working on this release?
Click to expand...
Click to collapse
please check the latest RECOVERY POST
rc chanu said:
please check the latest RECOVERY POST
Click to expand...
Click to collapse
Thanks a ton man! Will buy M62 this week and test your twrp asap.
can we get a good version of Gcam working?