Android max 10 updated, some apps are hidden now. - MTCD Android Head Units General

Purchased and received and new Dasaita Max 10- installed a couple days ago. I was asked to update. I did and now some apps are hidden. when i go into settings- apps- the AVIN app, which i use for an external dvd player is there, but i cant select it to put it on the main screen. Any suggestions?

Specific apps are hidden depending on the factory settings. If you deactivate front camera AVIN app is hidden. If you deactivate carplay....no zlink app will be shown.... and so on.
Check your factory settings to unhide apps according to your installed hardware
Enviado desde mi SM-G975F mediante Tapatalk

How do you like your Max10? I am debating on getting the Dasaita Max10 for my Rav4.

uribees said:
How do you like your Max10? I am debating on getting the Dasaita Max10 for my Rav4.
Click to expand...
Click to collapse
buy it bro. you wont regret

Hey I had the same issue. I went to apps and found the launcher and just cleared data. All my apps came back.

Related

OnePlus 3 and Moto360

Hey guys,
Just got my OP3 yesterday and it's blazing fast!
Question. Has anyone connected a Moto360 to it? I did a factory reset on mine, downloaded Android Wear and Motorola Connect. The watch seems to be connected but I don't get any notifications on it.
Any ideas?
I use a LG G Watch and I have notification. Inside the wear app on the phone, you can test notification. Also allow android wear app to be able to read notification (second from the bottom in "sound and notification" or whatever it's called in english)
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk
Thanks. Turns out a couple of phone restarts fixed it
OnePlus 3 works fine with my LG Urbane
One plus 3 works fine with moto 360 G2 as well
Sent from my ONEPLUS A3000 using Tapatalk
This may be incorrect advice but also go to Battery then Battery Optimisation from the Settings menu. Select All Apps from the drop-down, and set Android Wear to Don't Optimise.
I use zenwatch and all notification is perfectly displayed from my op3 no issues

Has anyone got experience with this?

So,
I just got back from work and I purchased an ex disipaly M2-10 (M2-A01w), it's got 3gb of RAM and 64gb ROM and it's on Android 5.1.1 and EMUI 3.1.
The retail software on there is in the applications settings and it's called Retail Demo. It plays a video everytime I put the device to sleep and when I log back in, the tablet has all these awful demo screens up.
I can use the entire device fine, just it takes about 20 seconds for the video to pass, and for me to spam <back> enough for the demo screens to disappear.
Is there any way I can remove this app (I cannot uninstall from settings or force stop either) or is it a case of reflashing, if so, how do I do that?
Thanks,
Hi,
This is a demo firmware. You should update it with the "retail" one...
my2cts
I'm in the same position. I brought an ex display a few days ago. I found after a few factory resets it seemed to return to a normal tablet

Heads up re: Android 10

For anyone else who is eyeing the Android 10 release today (eg Pixel owners) - after updating, my phone was getting really hot in my pocket, and the only thing I could find going berzerk was the galaxy wear suite. I un-paired my watch (seemed to cool down after) and attempted to re-pair later at home, which required a factory reset & restore from backup, which has stalled out and failed on me twice now. I've cleared cache/data on the Samsung apps, uninstall/reinstalled. No luck. Samsung app crashes when trying to open any time after the initial pairing.
So for now at least there appears to be some bugs they need to work out.
If you go ahead with the update like I did:
1) make sure to back your watch up first
2) good luck
I'd be curious to see if anyone else has this issue or has had success post update.
shmaque said:
For anyone else who is eyeing the Android 10 release today (eg Pixel owners) - after updating, my phone was getting really hot in my pocket, and the only thing I could find going berzerk was the galaxy wear suite. I un-paired my watch (seemed to cool down after) and attempted to re-pair later at home, which required a factory reset & restore from backup, which has stalled out and failed on me twice now. I've cleared cache/data on the Samsung apps, uninstall/reinstalled. No luck. Samsung app crashes when trying to open any time after the initial pairing.
So for now at least there appears to be some bugs they need to work out.
If you go ahead with the update like I did:
1) make sure to back your watch up first
2) good luck
I'd be curious to see if anyone else has this issue or has had success post update.
Click to expand...
Click to collapse
Sounds like it's not worth the effort!
Sent from my SM-N976V using Tapatalk
Eh, worth it to some - early adopters get to weed out the bugs for everyone else
(sort of) got it working today, at least enough to make it through a restore apparently. The Samsung app still crashes after you open it, so I can't get to any settings, but the oddest/most annoying thing is that every few seconds the handshake with the watch pops up a notification that says "Samsung Accessory Service - Transferring file. Please wait."
Coincidentally, my phone battery life tanked after getting the watch working again. Not sure if they're connected, but this phone-watch connection appears to be awfully high maintenance.
EDIT: Solution found
Finally got some time to dig in w/ logcat tonight & it was a simple fix - the com.samsung.android.samsungpay.gear plugin was throwing a ClassNotFoundException upon launching the Samsung Wearables app which was completely locking it up. I hadn't even thought to look for that - I was so focused on the Wearables app itself and the Galaxy Watch plugin.
So to summarize -
Symptoms:
- Samsung app freezes completely at some point during initial pairing and forever-after.
- Watch restore from backup hangs mid-way through transferring an app (my usual contender was the weather app hanging between 75-85%)
- This causes the background service to continually try to download and kills your phone battery (even after power cycles on phone and watch)
Solution: Uninstall the Samsung Pay Plugin (and re-attempt pairing/backup if you were in the middle of that when it failed.)
unfortunately brings no effect, app crashes even after reinstalling all components and repair. Samsung once again not packed. A normal use of the smartwatch is currently not possible on Android 10.
Gesendet von meinem Pixel 2 XL mit Tapatalk
irokes said:
unfortunately brings no effect, app crashes even after reinstalling all components and repair. Samsung once again not packed. A normal use of the smartwatch is currently not possible on Android 10.
Gesendet von meinem Pixel 2 XL mit Tapatalk
Click to expand...
Click to collapse
Did you reinstall the Samsung Pay plugin? I completely removed that and only used the main Galaxy Wear app and Galaxy Watch plugin (admittedly cleared cache and data on each as well) and had zero issues so long as I did /not/ reinstall the Samsung pay plugin.
I have not installed the pay-plugin. if I start the Samsung Wearable app freezes it, can not operate and closes after about 5 seconds itself.
Gesendet von meinem Pixel 2 XL mit Tapatalk
irokes said:
I have not installed the pay-plugin. if I start the Samsung Wearable app freezes it, can not operate and closes after about 5 seconds itself.
Gesendet von meinem Pixel 2 XL mit Tapatalk
Click to expand...
Click to collapse
Yep, that's the exact symptom I had w/ the pay plugin. Note that the wearable app downloads the pay plugin externally, not via the play store, so I strongly recommend doing one last check through your phone's list of installed apps for any "*plugin" Samsung apks. Mine was listed under the 'p's, not with the other Samsung plugins under 's' so it's worth some scrutinizing of the list.
If not that (your symptoms are identical to mine, which is why I keep harping that one), it's difficult to know more w/o an adb logcat capture.
Many thanks!!! You were right! The pay plugin was still installed on my pixel. Have it uninstalled and now the Wearable - App works!

Camera app keep crashing

Hi, just bought my Pixel 3a XL 3 days ago, updated to Android 10 December, the camera was fine and working correctly for few days.
But starting from yesterday. The Camera app keep crashing every time I open it, not able to take a single picture. I do everthing I can even clear storage, factory reset but the same problem.
I uninstalled the update for the Camera app on Play Store and use the pre-installed one, than the camera work normally, but cannot switch to front-camera.
Is anyone else have the same issue?
heorung said:
Hi, just bought my Pixel 3a XL 3 days ago, updated to Android 10 December, the camera was fine and working correctly for few days.
But starting from yesterday. The Camera app keep crashing every time I open it, not able to take a single picture. I do everthing I can even clear storage, factory reset but the same problem.
I uninstalled the update for the Camera app on Play Store and use the pre-installed one, than the camera work normally, but cannot switch to front-camera.
Is anyone else have the same issue?
Click to expand...
Click to collapse
First time I read about such an issue.
Maybe a hardware malfunction?
If you have an unlocked bootloader I would flash the latest stock factory image, and since you have had it for only a couple of days if that does not work I would get it exchanged.
I knew many people have the same issue like me if you read the comment on Playstore for the Google Camera app latest version. I don't know if it's hardware malfunction or not, but I can use the rear camera as usual when uninstall the latest update of Google Camera and use the factory version of December update.
I use camera px and I have never had a problem with it it's Google camera but with extra features enabled from the newer pixel phones give it a try it isnot on Google play store it is her on xda

Question Camera still crashing and rebooting P6P

Anyone else still having issues with the camera freezing and rebooting your phone? I'm on February update and camera app 8.4.400.42337059.19
As far as I've seen, the camera app crashing hasn't been a huge issue on the 6 series (of course there are reports as usual).
What have you tried to fix it so far? are all your apps and play services fully updated (2 different updates)
Alekos said:
As far as I've seen, the camera app crashing hasn't been a huge issue on the 6 series (of course there are reports as usual).
What have you tried to fix it so far? are all your apps and play services fully updated (2 different updates)
Click to expand...
Click to collapse
Everything is up to date. I haven't tried much. Open camera app seems to work fine. I'm waiting to see if it gets fixed by an update. I see others having the same issue here https://support.google.com/pixelphone/thread/136991301?hl=en#
redskykiter said:
Everything is up to date. I haven't tried much. Open camera app seems to work fine. I'm waiting to see if it gets fixed by an update. I see others having the same issue here https://support.google.com/pixelphone/thread/136991301?hl=en#
Click to expand...
Click to collapse
yeah that's average for a new phone. okay so let's see if we can resolve your issue.
go to play store, search camera and hit uninstall (it'll uninstall all the updates and revert to original version). then clear storage for camera app. then update it from play store. now long press on camera shortcut, give it all permissions including under Advanced (modify system settings). then test it.
Alekos said:
yeah that's average for a new phone. okay so let's see if we can resolve your issue.
go to play store, search camera and hit uninstall (it'll uninstall all the updates and revert to original version). then clear storage for camera app. then update it from play store. now long press on camera shortcut, give it all permissions including under Advanced (modify system settings). then test it.
Click to expand...
Click to collapse
thanks. I gave it a shot. It's only been random crashes....we'll see
I had troubles with my P4 XL randomly rebooting and it was caused by a lack of free storage, apparently Android 12 needs a certain amount of free MB/GB to properly work. The system doesn't warn you, it just causes bootloop/reboot issues, even said once that the Android system was corrupt and required a factory reset (I just normally rebooted and it worked, after that I cleared the storage). Do you have enough free storage?
Since I don't know how much A12 desires, I'd suggest to always leave at least 5GB free.
redskykiter said:
Anyone else still having issues with the camera freezing and rebooting your phone? I'm on February update and camera app 8.4.400.42337059.19
Click to expand...
Click to collapse
I am on my 3rd 6 Pro. I will tell you my first one was crashing on the camera andnit was indeed a hardware error. My next two 6 Pro's have NEVER frozen or rebooted. No camera problems. I recommend exchanging it through google.

Categories

Resources