Yesterday i root my OnePlus 7T (indian version 10.3.3) with patched boot image, the root process went successful, magisk manager is working all root app is working
but today I notice that I don't have my recorder app it just vanished after root, and then I check my call recording feature it's still there but not working anymore.
Plz anyone suggest what to do to get call recording back, thanks in advance any help is appreciated.
Files I used for rooting :
1. https://otafsg1.h2os.com/patch/amaz...13_OTA_013_all_2005192145_247d0ea6e3f7a9c.zip for extracting boot.img
2. Patched boot.img with magisk manager 7.5.1
saranshcrazier said:
Yesterday i root my OnePlus 7T (indian version 10.3.3) with patched boot image, the root process went successful, magisk manager is working all root app is working
but today I notice that I don't have my recorder app it just vanished after root, and then I check my call recording feature it's still there but not working anymore.
Plz anyone suggest what to do to get call recording back, thanks in advance any help is appreciated.
Files I used for rooting :
1. https://otafsg1.h2os.com/patch/amaz...13_OTA_013_all_2005192145_247d0ea6e3f7a9c.zip for extracting boot.img
2. Patched boot.img with magisk manager 7.5.1
Click to expand...
Click to collapse
Forget all the hassle and just install jOnePlusTools from Play Store then enable Call Recorder Service.
Thanks man you save my life ?
Please note, that if you use wifi calling, no recorder app will work. Figured I'd put that out there as a just in case for anyone that may need that information.
Sent from my SM-N975U using Tapatalk
Related
So I have the xt1710-01 variant of the z2 play and I just got root with magisk. I went on Snapchat and tried to respond to my friend, and it says that my camera wasn't working. I went to the camera app built into the stock firmware and it says to restart my camera. I then got an app that restarts it with root privelages and I still get the same error.
I found somewhat of a fix, but I have to uninstall magisk and reboot without root, then I can use the camera. Then flash it with TWRP again later.
Can someone please help me find a fix? I'm on the stock firmware up to date as of 10/5/17and with the latest magisk update.
Any help is greatly appreciated.
Alabamajackhammer said:
So I have the xt1710-01 variant of the z2 play and I just got root with magisk. I went on Snapchat and tried to respond to my friend, and it says that my camera wasn't working. I went to the camera app built into the stock firmware and it says to restart my camera. I then got an app that restarts it with root privelages and I still get the same error.
I found somewhat of a fix, but I have to uninstall magisk and reboot without root, then I can use the camera. Then flash it with TWRP again later.
Can someone please help me find a fix? I'm on the stock firmware up to date as of 10/5/17and with the latest magisk update.
Any help is greatly appreciated.
Click to expand...
Click to collapse
Install and Open BuildProp Editor
Click the three dot menu in the upper right corner
Select Properties
Go to the Permissions tab
Make sure that R (read) is selected (box becomes red) for Owner, Group, and Others.
Make sure W (write) is selected for Owner
Click Apply
Restart phone
How can I enable Camera 2 API Eu rom Mi max3 MIUI11 ANDROID 10?
I have enabled but no one camera opens
Flash this with TRWP.
Hello, I have installed the .Zip and I have used GCamator and it has not worked for me.I am with xiaomiEU 9.12.6 greetings
No one gcam works we have to wait
@millie said:
Flash this with TRWP.
Click to expand...
Click to collapse
flashed this and none of 10 different gcams worked. (https://www.celsoazevedo.com/files/android/google-camera/dev-suggested/)
Hey, I enabled hal3 but my whatsapp camera stopped working. And I couldn't take back hal3 couldn't disable it. I tried everything in build.prop. Can you help?
Another desperate user looking for a solution..
TRWP camera 2 api for eu.9.12.12 Pls thankyou
@millie said:
Flash this with TRWP.
Click to expand...
Click to collapse
TRWP camera 2 api for eu.9.12.12 Pls
thankyou
Omg i feel that my phone is really incomplete. What is the situation of camera2api on android 10 Q?
Mangineet said:
Omg i feel that my phone is really incomplete. What is the situation of camera2api on android 10 Q?
Click to expand...
Click to collapse
nothing for now.
How have you enabled HAL3?
I tried TWRP terminal, TWRP File manager, Magisk root and several apps to enable it with no success like BuildProp, Root Explorer and so on.
Every time I edit build.prop it is reverted to original values.
I have been able to even downloaded to my PC and the values are changed but after restarting or after changing the folder the file is reverted to its original values.
Thanks
nokiagye said:
I have enabled but no one camera opens
Click to expand...
Click to collapse
Same problem with me... [emoji17]
Sent from my MI MAX 3 using Tapatalk
Give up and using Android 9.
why do other android 10 devices have it tho? is it just a lack of developers for the max 3? I mean we had it already so technically it should be possible
I think some module in the Android 10 on the Mi max 3 are missing ,that why we couldn't have Camera 2 Api is enable... wish we could have a patch to add the folders and files we need to add the option . Like other we can't add some values in the build.prop ,it's restore to the original value .
Gcam works on gsi with a10 vendor, so it's something messed up in system
TheGed129 said:
Hey, I enabled hal3 but my whatsapp camera stopped working. And I couldn't take back hal3 couldn't disable it. I tried everything in build.prop. Can you help?
Click to expand...
Click to collapse
How has you enabled it?
I tried Magisk and HiddenProps config modules with no success.
I'm currently using MIMAX3Global_V11.0.1.0.QEDMIXM.
Thanks
I have managed to enable camera2api, however some library is missing and no camera app seems to work, not even OpenCamera app. The steps are provieded, however beware that THEY WILL BREAK ANDROID OTA UPDATES - You will have to flash everything from fastboot to unroot and restore OTA before further firmware updates.
If someone has libraries/apk to provide I'll be happy to test!
Done on: MIMAX3Global_V11.0.1.0.QEDMIXM
The steps for rooting are following:
fastboot boot orange-fox-recovery-10.1.img (recovery.img file)
install latest magisk zip from magiskmanager[dot]com (roughly 5.7MB Download)
reboot
open magisk manager, the following steps are done on the start screen of magisk manager
uninstall -> Restore images.
Advanced, uncheck Preserve AVB 2.0/dm-verify
Install/update magisk again, but from from inside magisk manager
reboot
add 'persist.vendor.camera.HAL3.enabled=1' and 'persist.camera.HAL3.enabled=1' to /system/buld.prop
reboot
Did you try GCam and if with the good version if it's working?
Using the stock firmware Android 10 (QQ1A.200205.002) on a P2XL with an unlocked bootloader
Running Magisk 20.3
Running Magisk Manager 7.5.1
Hiding Multiple apps and also Hiding the Magisk Manager app
I am able to pass the SafetyNet Check
ctsProfile = true
basicIntegrity = true
I am reading multiple things over and over about getting Google Pay to work again but some people's replies appear to be more unique depending on the phone and version of the image. Anyone have any advice specifically for Android 10 on P2XL?
It's your lucky day lol I had a Magisk module sitting on my computer its a Google Pay Bypass so pretty much it doesn't check that your phone is rooted with the app and works flawlessly everytime i use it. This module will definitely work along with Android 10, it can be flashed through either recovery mode or magisk.
Btw the file is safe to use as well and save it on your pc in case this link ever disappears or gets removed.
Link to the file:
https://mega.nz/#!7OAXnaaA!5ELX85PuzDKWf7RoXq9NnQgKcPT1e2csCaa7wiNHA30
Knxed_ said:
It's your lucky day lol I had a Magisk module sitting on my computer its a Google Pay Bypass so pretty much it doesn't check that your phone is rooted with the app and works flawlessly everytime i use it. This module will definitely work along with Android 10, it can be flashed through either recovery mode or magisk.
Btw the file is safe to use as well and save it on your pc in case this link ever disappears or gets removed.
Link to the file:
https://mega.nz/#!7OAXnaaA!5ELX85PuzDKWf7RoXq9NnQgKcPT1e2csCaa7wiNHA30
Click to expand...
Click to collapse
I found the new version of this v2.0 the XDA post and used it! thank you so much!
BrokenWall said:
I found the new version of this v2.0 the XDA post and used it! thank you so much!
Click to expand...
Click to collapse
Can you post where you got the new version? Thanks
Prey521 said:
Can you post where you got the new version? Thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=79643248&postcount=176
Just upgraded to android 10, and rooted at the same time. Most things work ok. AdAway not... But now I'm not in a wifi network I noticed the sim card is no longer detected... Tried remove and reinstall, reboot a few times... Nothing.
Any other ideas? I do not get an error there is no sim card...
Uninstall OOS Native Call Recorder module if you use it.
nik2011555 said:
Uninstall OOS Native Call Recorder module if you use it.
Click to expand...
Click to collapse
damn, I now see this...
That could be the problem!
I flashed the rom again, without rooting it, and now everything works. So if I want to keep recording calls, I have to go back to previous Android version...
If you use EdXposed and GravityBox Q you can enable call recording via GravityBox.
telenut said:
damn, I now see this...
That could be the problem!
I flashed the rom again, without rooting it, and now everything works. So if I want to keep recording calls, I have to go back to previous Android version...
Click to expand...
Click to collapse
You can use the apk in the same thread though, it runs automatically at every boot (requires root)
Hi there,
You can find attached the patched boot image for the first stable OOS 13 firmware (IN2023 = 8 Pro European/Global version)
Steps :
Unlock the phone bootloader
Install ADB and Fastboot on your computer
Download the patched boot.img below
Reboot your phone to fastboot mode and link it to your computer
Open a terminal prompt in the directory where the boot.img is located
type in the cmd
fastboot flash boot IN2023_11_F13-Patched.img
Click to expand...
Click to collapse
and press enter
Reboot the phone
Open the magisk app, hit Install then use the recommended method
Reboot and you're rooted
Google Drive
Thanks for this. Where can you download the oos13 firmware?
MR0808 said:
Thanks for this. Where can you download the oos13 firmware?
Click to expand...
Click to collapse
The update is available through Oxygen Updater app
First thoughts on OOS 13 are really positive, smoothness is the first thing I noticed, it's day and night with OOS 12
The UI revamp is very satisfying to me
Overall, it feels more polished than OOS 12, with the sense of details in every feature/setting, and some new unique features
Thanks. Looks like I'm getting IN2025, so will have to do the patched boot.img myself.
Time to find my old notes somewhere
Is your Fingerprint Sensor working with A13? Mine not.
I assume same issues as we had with A12 and USNF
GhostRider86 said:
Is your Fingerprint Sensor working with A13? Mine not.
I assume same issues as we had with A12 and USNF
Click to expand...
Click to collapse
i kept all my magisk modules after the update which fix SafetyNet and Fingerprint issue, so i don't know
Neil_Armstrong_ said:
i kept all my magisk modules after the update which fix SafetyNet and Fingerprint issue, so i don't know
Click to expand...
Click to collapse
I keepted mine as well, SafetyNet and gPay are working, but Unlock with Fingerprint Sensor is not. No reaction to sensor at all, not able to register new Finger...
Edit: Working now. Needed to disable USNF module, no reboot, Fingerprint Sensor working, register Fingers, screen lock, test, enable USNF module, enjoy
Neil_Armstrong_ said:
The update is available through Oxygen Updater app
First thoughts on OOS 13 are really positive, smoothness is the first thing I noticed, it's day and night with OOS 12
The UI revamp is very satisfying to me
Overall, it feels more polished than OOS 12, with the sense of details in every feature/setting, and some new unique features
Click to expand...
Click to collapse
I already have the fil, but I can't install it from system update apk,
am I missing something ?
EDIT:
re-downloaded the file again from Oxygen updater, but still it fails to install nd also "verification failed" in system local update.
Edit 2:
I re MSM back to OOS11 and upgraded directly to OOS 13 F3.
Tanks you so much it worked for me.
Can we use google pay with this version rooted ?
Edit. Gpay works
Hey guys, what version of Magisk (and branch) are you using to root OOS13?
I am still on 11.0.11.11 with Magisk 23.
What is the procedure to upgrade to OOS13 from OOS11 without losing root, Magisk modules and all my data?
I tried downloading full OOS12 using Oxygen Updater app, ran Local System Upgrade, it finished normally, then installed Magisk to inactive slot (after OTA) and rebooted BUT after reboot - the system stays 11.0.11.11. And the attempt to Local System Upgdate for OOS13 fails right on start.
What am I missing?
Please help
VBBoston said:
Hey guys, what version of Magisk (and branch) are you using to root OOS13?
I am still on 11.0.11.11 with Magisk 23.
What is the procedure to upgrade to OOS13 from OOS11 without losing root, Magisk modules and all my data?
I tried downloading full OOS12 using Oxygen Updater app, ran Local System Upgrade, it finished normally, then installed Magisk to inactive slot (after OTA) and rebooted BUT after reboot - the system stays 11.0.11.11. And the attempt to Local System Upgdate for OOS13 fails right on start.
What am I missing?
Please help
Click to expand...
Click to collapse
I updated from oos 13 unrooted. Lost my root using oos12
I was able to get OOS13 installed but now need to restore root.
Could someone please share
Magisk patched boot.img for Global OOS13 (IN2025_11_F.13) for rooting?
Thank you ~
VBBoston said:
I was able to get OOS13 installed but now need to restore root.
Could someone please share
Magisk patched boot.img for Global OOS13 (IN2025_11_F.13) for rooting?
Thank you ~
Click to expand...
Click to collapse
They have already been shared here.
Thank you very much!
stell52 said:
Tanks you so much it worked for me.
Can we use google pay with this version rooted ?
Edit. Gpay works
Click to expand...
Click to collapse
I have two problems:
1. Netflix and hotstar are not working.
2. Hdfc and Axis apps are not working.
Are they working for u ? I have tried a lot of fixes but couldn't get them to work. If someone can help it would be highly appreciated
Neil_Armstrong_ said:
Hi there,
You can find attached the patched boot image for the first stable OOS 13 firmware (IN2023 = 8 Pro European/Global version)
Steps :
Unlock the phone bootloader
Install ADB and Fastboot on your computer
Download the patched boot.img below
Reboot your phone to fastboot mode and link it to your computer
Open a terminal prompt in the directory where the boot.img is located
type in the cmd
and press enter
Reboot the phone
Open the magisk app, hit Install then use the recommended method
Reboot and you're rooted
Google Drive
Click to expand...
Click to collapse
I have rooted it successfully. Everything is working except Netflix, Disney Hotstar and a few banking apps. I have tried enforcing denylist, shamiko.etc. nothing is getting them to work.
If u have any fix please let me know.
Thanks
MrBloB said:
I have two problems:
1. Netflix and hotstar are not working.
2. Hdfc and Axis apps are not working.
Are they working for u ? I have tried a lot of fixes but couldn't get them to work. If someone can help it would be highly appreciated
Click to expand...
Click to collapse
In magisk go to settings then make sure zygisk is checked and activate denylist. In the denylist check google services is check.
Then install the module universital safetynetfix v 2.3.1 by kdrag0n
To me netflix and other apps work.
In the google play store you have many apps that can check if your safetynet is verified after it. If its verified it should work
To me vanced manager do not work when i try to install youtube vanced. It says that i tried to downgrade paquet but i did not. I uninstalled every youtube upgrade. If somebody know
MrBloB said:
I have rooted it successfully. Everything is working except Netflix, Disney Hotstar and a few banking apps. I have tried enforcing denylist, shamiko.etc. nothing is getting them to work.
If u have any fix please let me know.
Thanks
Click to expand...
Click to collapse
Flash Universal SafetyNet module in magisk (kdrag0n) and Magisk Bootloop Protector (just in case)
Check your status after a reboot with YASNAC from Play Store
Force the Magisk DenyList, and when configuring it, develop the apps and check all the tick boxes manually (to be sure)
Uninstall Netflix and install the latest .apk from APKMirror, can't help as other app (banking too) works fine
Isn't vanced dead ?
YouTube Premium Argentina is very affordable fyi ....
stell52 said:
To me vanced manager do not work when i try to install youtube vanced. It says that i tried to downgrade paquet but i did not. I uninstalled every youtube upgrade. If somebody know
Click to expand...
Click to collapse
stell52 said:
In magisk go to settings then make sure zygisk is checked and activate denylist. In the denylist check google services is check.
Then install the module universital safetynetfix v 2.3.1 by kdrag0n
To me netflix and other apps work.
In the google play store you have many apps that can check if your safetynet is verified after it. If its verified it should work
Click to expand...
Click to collapse
Yes i have done this. Tried shamiko as well. M passing safetynet checks, still it doesnt work.