Related
can this be done using the a flashable note 3 rom ?
http://www.androidfilehost.com/?fid=23159073880932541
Well i am not developer
But.i really wonder that what happens if note 3 rom flashed to note 2..
The leaked rom of 4.3 of note 2 has old kernel. So note applications are falling when its ported.probably because of old kernel.
But my question is what happens if note 3 rome is directly flashed to note 2..
Sent from my GT-N7100 using xda app-developers app
m_carleone82 said:
Well i am not developer
But.i really wonder that what happens if note 3 rom flashed to note 2..
The leaked rom of 4.3 of note 2 has old kernel. So note applications are falling when its ported.probably because of old kernel.
But my question is what happens if note 3 rome is directly flashed to note 2..
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I'm also not a dev. And I wondered that too. Then I thought... if that was even possible someone would have already done it by now, right? Still, maybe we all wait for someone to try it... So, feeling courageous? Go ahead and let us know if that worked. But don't blame me if u get ur device bricked or something.
Sent from my GT-N7100 using xda app-developers app
Obviously you can't flash the note3 rom to note2 without modifying it. If it would even flash, your device would get bricked by the note3 kernel.
In the end, this is a question/answer thread. Please someone move it to the proper section or close it. No development going on here.
Gesendet von meinem GT-N7105 mit Tapatalk 2
Ok, I actually have been trying to port a N3 ROM over to N2 with no success. I have very limited time, a crashed hard disk and no Internet at home. If anyone is interested, I can upload (in maybe a few days - no net at home ) a half-baked port that just about gives the N3 boot sound and gets stuck at the Samsung text boot animation. I haven't gotten a logcat from it too, so its more like shooting in the dark.
Even if you are not interested in my half-baked port and want to start afresh, note that the /system partition's size in the N3 is pretty different. You'll either have to try a .PIT that gives you ~3GB to the /system or go my way of chopping down on the /system's contents to fit it to N2's default partitions...
I tried flashing ROMs based on the leak, and my Note 2 gets as far as the boot screen, where it starts to vibrate in a Morse code type pattern. I'm thinking combining one of the ROMs with a different kernel will get something started...
sabrdawg said:
I tried flashing ROMs based on the leak, and my Note 2 gets as far as the boot screen, where it starts to vibrate in a Morse code type pattern. I'm thinking combining one of the ROMs with a different kernel will get something started...
Click to expand...
Click to collapse
After you get stuck in the repeated vibrating pattern, reboot to recovery and head to /data/logs - pull the latest tar log (by UTC time) and go through the txt it contains - you will have the kernel log, logcat and all that you need to debug.
My mistake was I downloaded an incomplete dump that is missing part of the framework. Will try again with a different base when I get the time.
Awesome! So even after a battery pull, this information will still show on the log? A battery pull is my only way out after this happens. I'll give it a try!
---------- Post added at 09:08 AM ---------- Previous post was at 09:06 AM ----------
I need to add that I'm using a T-Mobile Note 2 (SGH-T889).
I do think that it's nearly impossinle, dur to the difference in resolution and width between N2 and N3 even if it boots up it will look distorded, and also is the N2 missing sensors that the N3 has..
some of the apk's are working on the leaked 4.3 firmware, i think u should help in getting the air command working properly, it's working but no icons, the thread is over in the apps section
slitex said:
I do think that it's nearly impossinle, dur to the difference in resolution and width between N2 and N3 even if it boots up it will look distorded, and also is the N2 missing sensors that the N3 has..
some of the apk's are working on the leaked 4.3 firmware, i think u should help in getting the air command working properly, it's working but no icons, the thread is over in the apps section
Click to expand...
Click to collapse
That is not a problem. We have seen ports from different resolutions in the past. We may have to change the resolution of png files in the drawables for some apk.
That said - and this is for all members - THIS IS A DEV DISCUSSION. UNLESS YOU ARE ATTEMPTING TO PORT THE ROM OR DO SOME DEV STUFF, PLEASE DO NOT POST HERE. USE THE GENERAL FORM INSTEAD. Hope you understand the importance of keeping a dev thread uncluttered.
@sabrdawg - yes, you pull the logs after battery pull (or holding down power-vol up-home to reboot into recovery. And I am using the N7100 leaked 4.3 as a base and N9005 stock to port. I am not sure if the T889 will work with the N7100's firmware - if it does not and if you cannot get the 4.3 leak to work on your phone you should hold back (unless you first port the N7100's leak to your device).
My porting attempts or on hold. The base ROM I picked (n a whole bunch of them I checked) are having problems with missing files in the framework. I have used up my monthly internet quota in my 3G and also the add-on pack's quota (and do not have internet at home ). Whoever is attempting a port, please download a full ROM from sammobile(say, SM-N9005 - UK or Singapore for example) extract it and deodex it to use as a base for porting to our device (Read up this link under "CONVERSION OF STOCK TAR.MD5 LEAK TO CWM FLASHABLE FOR NEW AND UPCOMING DEVELOPERS" (towards the bottom 3/4th of the page) if you are not sure how to go about it. Finally here is a good guide about porting.
Note that it would be helpful if you have some experience in porting, debugging using logcat and other logs. In any case, if you are not at least knee deep into Linux, Android and generally some technical affinity, you should not be attempting this. All the best. I will give it a shot if I can whenever I get some internet connection I can use to download the ~1.5GB stock ROM.
Maybe you can use a custom rom based on the leak for note 2...and a custom rom based on the official android 4.3 for note 3 and try this
http://forum.xda-developers.com/showthread.php?t=1957219
I dont have the note 2...or the note 3 to try this. But Im thinking maybe you can use wannamlite based on the leak fot note 2 and a wannamlite for note 3 (I really dont know if there is one).
Im not a dev but I use this metod to port some roms for my atrix and works ok.
So, in other words, one could take any 4.3 ROM out there for the T-Mobile Note 2, and any ROM based on the Samsung leak and do this?
sabrdawg said:
So, in other words, one could take any 4.3 ROM out there for the T-Mobile Note 2, and any ROM based on the Samsung leak and do this?
Click to expand...
Click to collapse
I dont know....I made this for my atrix using cm7 roms and works ok...maybe this can be done in this case...I use some cm7 rom from the Motorola Photon (similar to the atrix but bigger screen) and a cm7 rom for the atrix....everything works ok.
Maybe someone can try that...I dont have the note 2...so...I cant do it
We’ve just announced the release of Remix OS 2.0 ROMs for Nexus 9 and Nexus 10. The Nexus 9 and Nexus 10 ROMs are now available for download here:
Nexus 9 ROM
http://www.jide.com/remixos/devices/nexus9
Nexus 10 ROM
http://www.jide.com/remixos/devices/nexus10
We’ve been conscious of all the interest that Nexus 9 and 10 users have expressed in being able to experience Remix OS 2.0 on your tablets. We definitely heard your comments and are excited to finally have Remix OS 2.0 ready for you to experience.
Thanks!
Hey Jason!
I read about the RemixOS and it looked awesome!
I have a question, will you ever support or port the OS to the galaxy note pro in the future?
Thank you in advance!
Great news!. Installed now on my Nexus 10. Good job and thank you for your effort Remix Team!
Took me forever to get it working...
First boot took 35 mins. I shut down a while ago and attempted to restart, but it's been more than an hour now and my Nexus 9 is not back up. Completely stock RemixOS 2... Wtf?
Thank you so much for this. This has added a new life to my Nexus 10. Please keep releasing updates for Nexus 10.
Great Android distribution for my Nexus 10, fast and good enough to give more life for my tablet.
There are some issues sometimes, such as Firefox will not show the rendered text, it will show a white browser area with text behind a white overlay.
Also, in the Play Store, the device appears as a phone, this is because the ro.product.model and name are changed from the default values for Nexus 10.
Is there a root method for this yet?
I'm impressed with this OS. It makes sense on a bigger tablet like my Nexus 10. There are not very many issues I have come across. It makes me want to get a dedicated mouse and keyboard and use it as more of a laptop. I know Remix OS is still new and developing, but I can only think of a few things that I look forward to seeing.
1. Widgets. I did see a video that 2.0 had widget support. Am I missing it or is it just not in this build yet. https://youtu.be/ledz0FTlzKA
2. Removing apps from the home screen.
3. Persistent notifications. I've always used apps like battery widget reborn and weather apps and Calendar Status Pro that give me notifications that stay in the notification shade. They seem to go away once the app is closed on this OS. Maybe it would cause multitasking issues if it had to keep stuff like that in memory and that's why they don't exist but if it's possible, that would be nice.
4. And on a not so important note, the lock screen could be more useful as far as notifications and all.
Also, questions about updates. I think I read somewhere that Remix OS is updated pretty often. Will the Nexus 9 and 10 get the same updates every other devices get? Will they be OTA and do we need the recovery that came with the download in order to use the OTA (I am using TWRP still)? And will being rooted effect the OTA (I rooted with SuperSU)?
Thanks for this awesome new OS. I love how different it is from normal Android but is still Android.
+1 great first impresión. Great work and the same few things to improve if the remix team is open to suggestions.
Bluetooth issues? nexus 10?
I have no issue connecting either 1 mouse or 1 keyboard, however when i want to sync both a mouse and a keyboard, i cannot locate the second device. For example if i connect my keyboard then my mouse becomes undiscoverable, even though my other devices can see the mouse. If i pair the mouse first then i cant see the keyboard. BTW im using a nexus 10.
Is there a way i can have both be paired at the same time?
I have a bluetooth mouse and when i connect to the tablet the mouse is skippy, laggy and jumpy. whatever you want to call it. Any way to remedy this? is it a bad bluetooth mouse? or can the tablet not handle it?
anyone know how to revert back to stock from remix os? i try to flash image, failed. try to enter recovery also failed. help anyone?
Do I have to revert to stock from Remix OS 1.5 to upgrade to Remix 2.0?
tyyyyyyyyyyyyyyyyyyyyyyyyyy
---------- Post added at 01:10 AM ---------- Previous post was at 01:06 AM ----------
:d:d:d:d:d:d:d:d:d:d:d:d:d
tribalfusionaxe said:
anyone know how to revert back to stock from remix os? i try to flash image, failed. try to enter recovery also failed. help anyone?
Click to expand...
Click to collapse
Did you try simply forcing bootloader mode and flashing with fastboot from a PC with the flash-all script that comes in stock images? I mean, hold power + volume down long enough for the tablet to reboot, then let go the power button but hold the volume down. Then select fastboot and finally, connect the tablet to the computer and follow the normal steps for flashing.
What are the chances for eventual Nexus 7 (2013) support?
Hey there, I'm very new to Remix OS, and I just installed version 2.0 on my Nexus 9 and it works flawlessly. My only question is, when I set a Pattern as a lockscreen password, the lockscreen with the clock disappears only leaving the Pattern dots. Is there a way that I can keep the lockscreen clock while still having a Pattern? Thanks!
I just get a boot loop on my Nexus 9 WiFi (volantis).
Reflashed all the images twice.
Does it matter what version we are coming from? I was on the N Dev preview. I'm currently flashing Marshmallow stock images, then I might try to go to remix from there to see if it makes a difference.
Also the flash instructions say to flash userdata, but there is no userdata.img, the instructions also don't say anything about vendor.img, but I flashed it anyways.
EDIT: It didn't make a difference. It just says GOOGLE, then the Remix OS logo flashes for a second or 2 then its back to GOOGLE and does this infinitely.
EDIT2: Looks like flashing the stock 5.1.1 images, and then flashing the RemixOS images worked.
Remove Remix OS from Nexus 10
So, I installed Remix OS on my Nexus 10. So, Now I want to remove it and install CyanogenMod on it. Using Win7, adb can't see the current device even though it worked fine when it had a stock Android on it? Suggestions?
Cant detect SU Binary
I ran SuperSU (Chainfire) and it cant detect the su binary. is there a workaround for this? can I reroot my nexus 10 using typical methods without flashing the stock firmware?
Will there be a version for the Nexus 9 LTE per chance? I'd love to make the switch...
Who can Help me please
I have samsung note 10+ snapdragon sm-n9760 TGY
Updated to Android 10 one ui 2.1
Baseband version : N9750ZSU2CTD1
After update to Android 10 I got lags and problems
I want back to android 9 pie
Is it possible with any way with any coast?!!
Android pie firmwares are bootloader 1, you have now bootloader 2, so, no, there is no way to roll back to pie
m.saifan said:
Who can Help me please
I have samsung note 10+ snapdragon sm-n9760 TGY
Updated to Android 10 one ui 2.1
Baseband version : N9750ZSU2CTD1
After update to Android 10 I got lags and problems
I want back to android 9 pie
Is it possible with any way with any coast?!!
Click to expand...
Click to collapse
This is my advice to you ,
from my personal experience with Samsung devices, over the years .!!
Firstly, there can be many reasons for lags and problems .??
eg .
It can be another app that's causing the lag ?
It t can maybe be that....
'something /app ,setting ,system app is corrupted .."??
you have maybe disabled / freeze an app and you having a knock on effect ,modified
or tweaked something .
Bottom line ,
you have to look for the "culprit " that's causing all the issues .????
Best is to start from scratch ...factory reset .!!!!!
It should help .?
Yes, i know it's an big issue ..factory resetting or as i found out .....
I normally ,did a factory reset ,then flashed stock firmware ( no root attempts etc )
In my case i usually have about 200/300 apps installed .
It's a big job ..big hazzle/effort , to re install
and yes no backup "re installs" except eg contacts ,calendar entries etc .
No old backup ,Device settings ,no data etc
Fresh installs , a few apps at a time and test your device for issues ..each time
eg for a day or 3 .
Then carry on with another few installs ....
Further ,
i could be a Samsung firmware issue ..in which case Samsung should fix/patch it ..later.?
But , then most of other users , would have had similar issues, as you ?
Also ,I should know , how big hazzle ..effort factory is .!
If the current situation is annoying/frustrating you ,then its worth a try .?
but bottom line ..in all of my cases ( with my past devices )
i either found the culprit app or corrupted setting etc ..issue .!!
Never ever .. have i flashed "back" to solve an issue .!
Good luck
Hi,
I love my galaxy A70 with one ui 3.1, but i prefer pixel experience or some other aosp roms. Has someone hard bricked his phone by installing a custom rom? This is my main phone, and once I've tried to install lineage os from some 3rd party site, and i have successfully flashed twrp but when i've installed lineage os it was automatically booting into recovery . Can someone tell me, is custom roming a70 good and easy, and recommend me a rom?
i want:
- good look
- good battery life
- good performance
- android 12 maybe
i was looking at pixel experience 12 thread but it's closed and people had problems with it. i've heard that you cant install android 12 roms on galaxy a70. is that true?
sorry for my bad english
what rom do you recommend (calls must work)
It was quite hard to Hard-Bricked this phone if you followed the instruction.
As this is your main phone, I would suggested you to download a offical firmware (as backup in case something goes wrong) and remember to backup all your data. Also read what DOES work and what DOESNT work.
I tried Pixel experience but it was giving me issues. Currently on PixelOS and it is working fine. I have not tried any other ROM as it is hassle to backup, restore and then entering password of apps.... Not sure, but perhaps most of the ROMs does not come with Gcam or ANX. So which is the best A13 ROM for Mi 11x with a working ANX or Gcam?
kkoolkaran said:
I tried Pixel experience but it was giving me issues. Currently on PixelOS and it is working fine. I have not tried any other ROM as it is hassle to backup, restore and then entering password of apps.... Not sure, but perhaps most of the ROMs does not come with Gcam or ANX. So which is the best A13 ROM for Mi 11x with a working ANX or Gcam?
Click to expand...
Click to collapse
I run the AMAZING Evo-X 7.4 rom, its solid as a rock and works brilliant for me.
I would suggest to check out the Evo-X thread, you might even find me on there
Now the Pain with switching rom is having to re-install all you apps and loosing their data,
as far as i aware there is no A12/A13 Recovery that backs up the complete phone like the Clockwordmod days.
I use a great program called Migrate-GPE it comes in three parts and is FREE, its available on the App store but i have uploaded the version i use, you need to be ROOTED to use this app.
Migrate-GPE saves most of your apps including their data, excluding Banking and Magisk apps,
I love it as it save all my offline maps, battery stats, ect.
Have fun.
johnr64 said:
I run the AMAZING Evo-X 7.4 rom, its solid as a rock and works brilliant for me.
I would suggest to check out the Evo-X thread, you might even find me on there
Now the Pain with switching rom is having to re-install all you apps and loosing their data,
as far as i aware there is no A12/A13 Recovery that backs up the complete phone like the Clockwordmod days.
I use a great program called Migrate-GPE it comes in three parts and is FREE, its available on the App store but i have uploaded the version i use, you need to be ROOTED to use this app.
Migrate-GPE saves most of your apps including their data, excluding Banking and Magisk apps,
I love it as it save all my offline maps, battery stats, ect.
Have fun.
Click to expand...
Click to collapse
Thanks for your suggestion. Yes, I came across EvoX and yes, also migrate GPE. Will try after listening to more suggestions
I also tried Evolution-X, but it has a major drawback. If you go back to MIUI it gives you the "find device storage corrupted" error. Also makes your device uncertified. I eventually fixed both these but it was a massive pain.
user0u said:
I also tried Evolution-X, but it has a major drawback. If you go back to MIUI it gives you the "find device storage corrupted" error. Also makes your device uncertified. I eventually fixed both these but it was a massive pain.
Click to expand...
Click to collapse
Apparently it does but "find device storage corrupted" error it`s a easy fix as long as you have Twrp Recovery,
As for "Device Uncertified" i might flash MIUI Stock to see if i encounter this issue before return back to EVO-X.
I feel there is no advantage returning to stock due to firmware limitations,
if and when your device needs warranty repair, sending it in with non Miui Firmware installed shouldn`t affect your claim.
johnr64 said:
Apparently it does but "find device storage corrupted" error it`s a easy fix as long as you have Twrp Recovery,
Click to expand...
Click to collapse
Wish I knew that. Can you explain how it's done? I tried flashing persist using twrp but that didn't fix it in my case.
I went back to miui because I was experiencing battery drain on Evo-X. And maybe it's just me but my eyes felt strained on Evo-X for some reason.
user0u said:
Wish I knew that. Can you explain how it's done? I tried flashing persist using twrp but that didn't fix it in my case.
I went back to miui because I was experiencing battery drain on Evo-X. And maybe it's just me but my eyes felt strained on Evo-X for some reason.
Click to expand...
Click to collapse
Hi,
You could check out my post, it worked for me:
Could someone send a dump of persist partition?
I have the error device is not certified with locked bootloader after reflashing the persist partition when it was corrupted (I took persist.img file from fastboot rom). I think that a dump of persist partition from the other poco f3 may solve...
forum.xda-developers.com
With TWRP/OF Recovery installed download and install TWRP Recovery 3.6.2 12 POCOF3 v6.3 A12-alioth-skkk from recovery,
download and unzip find device storage corrupted your device is unsafe now please note this is for EEA Firmware only.
In TWRP Recovery tap on the "New Persist image from Original Rom" folder and then open Persist.img folder and then from TWRP tap Install Image, select Persist.img and then tap the Persist.img checkbox in TWRP and swipe right,
Reboot,
Job done
I WAS PREVIOUSLY RUNNING EVO-X V7.4,
AS A TEST I JUST INSTALLED STOCK
"Alioth_eea_V12.5.6.0.RKHEUXM_07-09-2021.FASTBOOT-11.0" FIRMWARE OVER THE TOP
AND I DIDN`T GET THE "find device storage corrupted" POP UP
johnr64 said:
AS A TEST I JUST INSTALLED STOCK Alioth_eea_V12.5.6.0.RKHEUXM_07-09-2021.FASTBOOT-11.0 FIRMWARE
AND I DIDN`T GET THE "find device storage corrupted" POP UP
Click to expand...
Click to collapse
Man i did it 1000 times before, and never ever get like that issue or any issues. + in logically if u changed from stock firmware to any custom rom and back again to stock firmware nothing will changing or happening
CRNO said:
Man i did it 1000 times before, and never ever get like that issue or any issues. + in logically if u changed from stock firmware to any custom rom and back again to stock firmware nothing will changing or happening
Click to expand...
Click to collapse
Well i actually switched to crDROID for about a week, while using crDROID and replying to posts on XDA a user pointed out the "Device Storage" issue and portioned the blame at the Evo-X rom, as a test i downgraded from crDROID back to stock "eea_V12.5.6.0.RKHEUXM" firmware and yes i received the "NAG SCREEN"
Using the above method I installed a new Persist.img and the nag screen disappeared.
As their was a rumor still going around blaming Evo-X,
again as a test i downgraded to "eea_V12.5.6.0.RKHEUXM" over the top of Evo-X V7.4 that i`ve been using for a week and the nag screen wasn`t present ,
I the Evo-X rom its AMAZING
johnr64 said:
I run the AMAZING Evo-X 7.4 rom, its solid as a rock and works brilliant for me.
I would suggest to check out the Evo-X thread, you might even find me on there
Now the Pain with switching rom is having to re-install all you apps and loosing their data,
as far as i aware there is no A12/A13 Recovery that backs up the complete phone like the Clockwordmod days.
I use a great program called Migrate-GPE it comes in three parts and is FREE, its available on the App store but i have uploaded the version i use, you need to be ROOTED to use this app.
Migrate-GPE saves most of your apps including their data, excluding Banking and Magisk apps,
I love it as it save all my offline maps, battery stats, ect.
Have fun.
Click to expand...
Click to collapse
1. Does it support turbo charging?
2. How is overall battery life?
3. Which cam application does it use? Basic or something like Gcam or MIUI stock ones?
4. What other issues you have come across?
Thanks
Hi,
1. Fast charging works great, but then i use a QI wireless charging adaptor, check out my post on the Poco F3 thread.
2. My phone last me around 9 hours, as i`m not a massive phone user,
I charge my phone from 45% to 65%, this give me enough charge for a day and generates 0.02 cycles of battery wear, the amazing Evo-X rom has the "Smart Charging" function.
3. Not to Shure about the stock camera as i have three different apps running,
it think it`s org.lineageos.aperture Version code 33.
4. When starting from a clean install Every thing works great, I haven't encountered any FORCE CLOSE issues
5. THIS ROM IS AMAZING, IF IN DOUBT CHECKOUT OUT THE OFFICAL TELEGRAM PAGE,
EVO-X SIMPLY AMAZING
johnr64 said:
Hi,
1. Fast charging works great, but then i use a QI wireless charging adaptor, check out my post on the Poco F3 thread.
2. My phone last me around 9 hours, as i`m not a massive phone user,
I charge my phone from 45% to 65%, this give me enough charge for a day and generates 0.02 cycles of battery wear, the amazing Evo-X rom has the "Smart Charging" function.
3. Not to Shure about the stock camera as i have three different apps running,
it think it`s org.lineageos.aperture Version code 33.
4. When starting from a clean install Every thing works great, I haven't encountered any FORCE CLOSE issues
5. THIS ROM IS AMAZING, IF IN DOUBT CHECKOUT OUT THE OFFICAL TELEGRAM PAGE,
EVO-X SIMPLY AMAZING
Click to expand...
Click to collapse
You tempt so much for the ROM .... wondering you are into marketing? LoL. just kidding. Everything is downloaded - ROM, FW, Migrate GPE - all set to go. I will do it over weekend
kkoolkaran said:
You tempt so much for the ROM .... wondering you are into marketing? LoL. just kidding. Everything is downloaded - ROM, FW, Migrate GPE - all set to go. I will do it over weekend
Click to expand...
Click to collapse
I`ve been playing/experimenting with customs roms for over 10 years starting with the HTC Wildfire, i then moved on to the early Samsungs Pre KNOX and then on to LG phones, i still have my LG G7.
I have seen the evolution of Android over the years and it`s been mind blowing and the quality of Custom rom`s and their Dev`s is outstanding.
I choose to upgraded my G7 as LG unfortunately left the smartphone market and custom roms were getting scarce, so i settled on the F3 because it was easy to unlock, had Great specs and dev support, also being one of the most popular xiaomi phones on XDA helps and it was great value for money.
I have run maybe 6 major roms as my daily driver over the last 13 months that I have owned the F3, I have also tested maybe another 10 - 15 roms out of curiosity.
I have found that EVO-X is the most polished rom that i have come across with all the major feature that most users need and i like to give credit when credit it`s due.
EVO-X 7.4 Simply Amazing
johnr64 said:
I`ve been playing/experimenting with customs roms for over 10 years starting with the HTC Wildfire, i then moved on to the early Samsungs Pre KNOX and then on to LG phones, i still have my LG G7.
I have seen the evolution of Android over the years and it`s been mind blowing and the quality of Custom rom`s and their Dev`s is outstanding.
I choose to upgraded my G7 as LG unfortunately left the smartphone market and custom roms were getting scarce, so i settled on the F3 because it was easy to unlock, had Great specs and dev support, also being one of the most popular xiaomi phones on XDA help and it was great value for money.
I have run maybe 6 major roms as my daily driver over the last 13 months that I have owned the F3, I have also tested maybe another 10 - 15 roms out of curiosity.
I have found that EVO-X is the most polished rom that i have come across with all the major feature that most users need and i like to give credit when credit it`s due.
EVO-X 7.4 Simply Amazing
Click to expand...
Click to collapse
Do u by any chance know of MIUI13 ROM which allow smart unlock feature? I know through custoMIUIzation module i can do it, but i was just wondering if someone has optimized MIUI13 for Mi11x with such features unblocked to save the hassle.
I have installed EVO-X and it is good. But i miss "Themes" feature of MIUI which changes over all skin of the phone with so many options to search for. What i like the most that it changes wallpapers, icon, system setting, lockscreen, colors etc in one go. I tried to find an alternative app and even tried installing MIUI's theme module but to no avail. TBH i am only missing that feature.
bliss Rom allows it, I am on 16.2 build and it's perfect for me. My favorite rom in general is crdroid, but last version of bliss Rom hits all my criterias (hbm, power toggle for torch, really smooth and good battery backup...). It is a pity it lacks visibility here