This is what happened exactly
First i unlocked the boot loader and installation twrp successfuly no prblm
Then i installed multiple custom roms play around with theme for Mount's and every thing was good
Until i saw the realme ui 10 and i wanted to try it so what i did is flash the realme cn stock rom zip corect version (chains) from twrp and it installed correctly
But wen it got to setup page (language selection )it crashes after 3 or 4 seconds . every time .i trayed formating multiple times from stock recovery but same and i trayed to flash twrp again but my device dont show up it adb after i inter the fastboot devices comand
Plsssss help i have no way to get it to customers services .tnks
you have to wipe data and cache and dalvik ....... and go to advanced wipe and wipe data before instalation and the install realme ui when you successfully finish the installation reboot to recovery and again go to advanced wipe and wipe data again and reboot it will boot fine
Related
I recently installed twrp and for my moto g5 then I did format data later on went for reboot system then I found no os installed so I installed a custom Rom later rebooted the system then I got stuck in twrp loop. I went through all the solution but it did not work so please help. Thank you
If you're on stock rom you need to remove dm-verity for it to boot (read faqs on twrp thread!)
For custom rom flash it correctly
Wipe
Advanced wipe
Wipe system data cache
Install
Select rom zip
Select gapps zip
Select root zip (optional)
Wipe cache
Restart
What architecture rom and twrp are you using?
Hi you guys
Can anyone tell me how back from custom rom to miui.eu, how to do that?
I had Resurrection Remix Oreo RR-O-v6.1.0-20180817-sagit-Official.zip and I wanted update to RR-O-v6.2.1-20181017-sagit-Final.zip.
After update I have all issues: can not unlock phone after power on, reboot to system almost everytime.
Newest TWRP twrp-3.2.3-4-arian-sagit make a big mess with my time zone and all next attempts to install any version of twrp take over the same time zone error
I came to the conclusion that I think I will return to miui.eu
And forget how to do that
1. Try:
- Boot into this TWRP
- Wipe system, cache and dalvik cache, art, data
- install xiaomi.eu_multi_MI6_8.10.25_v10-8.0
- reboot to system
Code:
No OS Installed! Are you sure you wish to reboot?
2. Try:
- Boot into this TWRP
- Wipe system, cache and dalvik cache, art, data
- format data - write yes tap ok
- Boot into this TWRP again, copy rom from pc
- install xiaomi.eu_multi_MI6_8.10.25_v10-8.0
- reboot to system
Code:
No OS Installed! Are you sure you wish to reboot?
as a result, I have a clean phone with no OS and recovery twrp-3.2.3-4-arian-sagit
I format data and then wipe all, try that.
that no os msg ur getting, if u can get miui to boot then it doesnt matter. give it a few min after you reboot even if it says there's no OS, mby its worth the try.
_euphonic_ said:
Hi you guys
Can anyone tell me how back from custom rom to miui.eu, how to do that?
I had Resurrection Remix Oreo RR-O-v6.1.0-20180817-sagit-Official.zip and I wanted update to RR-O-v6.2.1-20181017-sagit-Final.zip.
After update I have all issues: can not unlock phone after power on, reboot to system almost everytime.
Newest TWRP twrp-3.2.3-4-arian-sagit make a big mess with my time zone and all next attempts to install any version of twrp take over the same time zone error
I came to the conclusion that I think I will return to miui.eu
And forget how to do that
1. Try:
- Boot into this TWRP
- Wipe system, cache and dalvik cache, art, data
- install xiaomi.eu_multi_MI6_8.10.25_v10-8.0
- reboot to system
2. Try:
- Boot into this TWRP
- Wipe system, cache and dalvik cache, art, data
- format data - write yes tap ok
- Boot into this TWRP again, copy rom from pc
- install xiaomi.eu_multi_MI6_8.10.25_v10-8.0
- reboot to system
as a result, I have a clean phone with no OS and recovery twrp-3.2.3-4-arian-sagit
Click to expand...
Click to collapse
Foa this is the wrong place, use the Question / Help section.
Sad to hear you can't use the final RR build, which works just fine. Also my twrp build inst nuking the time, it isn't working on all new builds.
To go to miui you just need to do the steps from your try 2.
After flashing the Syberia 9.0 rom into my mix 2, my phone stuck in the fastboot mode. Every time I tried to reboot my phone, my phone will go right into the fastboot mode. I could get into the TWRP, and I perform the 'wipe' serval times.
This is what happens on my phone:
wipe the system---- flash the rom ------ reboot ----- fastboot mode
I don't know what happens with my phone. Pls help me guys:crying:
Could I try to use the official miui fastboot update via the mi flash?
Try installing again with "Clean Flash". Wipe System, Cache/Dalvik and format Data (don't wipe data).
Backup your data first, because your data will destroy.
I believe you should already have the ROM, Firmware and Gapps into internal storage.
Now boot to recovery.
Wipe Data (if u are decrypted, format data)
But be aware that formatting Data means that you have to again copy everything back to internal storage using adb. So my advice is to just wipe and see if that works out.
Install Firmware, ROM and Gapps zip.
Order of installation should be same.
Reboot - 1st boot may take some time.
Hi everyone
yesterday i receveived the android 10 update OTA for my redmi note 8 global and i updated it
i ve been using OrangeFox recovery since months and everything worked fine until yesterday
i can no more upload files to phone using recovery it shows 0 MB space i reinstalled ginkgo_global_images_V12.0.3.0.QCOMIXM_20201226.0000.00_10.0_global using fastboot then installed again twrp but after every reboot no more custom recovery only MI recovery 3.0 i have to install it everytime now and anyway in twrp or orangefox i can do anything there are strange files names it just seems it can t decrypt data to work properly ( i have no password set btw ) i formated data and same thing
Anyone can help please
be sure that ur phone is unlocked and enable USB debug
here are talking about an issue about installing a custom recovery or an issue in phone storage
I use fox too but I flashed the TWRP 1st using TOOL ALL IN ONE installed it without any issue then flashed fox from a flashable zip
for the memory issue I had it too it started with no being able to copy files that are 4Go or more to the internal memory so I flashed a the stock rom again and the memory become 0 and not accessible
but in my case fox was working so I went to wipe tab and wiped everything after ejecting the memory card in the reboot it said the system was destroyed I flashed the rom again and the issue was resolved
but before u do that make sure the phone is unlocked if not u wont be able to flash anything
Requirements: miui 12.0.3 china stable fastboot rom.
Orangefox recovery;
Custom rom of your choice;
Example xiaomi .eu 12.0.3 stable
Device: gingko(redmi note 8)
Note: make sure your bootloader is unlocked;
Backup your data before doing anything.
This guide is working and tested .
*If anything goes wrong i will not be responsible*
*Its your choice*
Make sure to check clean all button on mi flash tool.
(Do not check clean all and lock)
Flash miui 12.0.3 stable china fastboot rom using mi flash tool in fastboot mode;
After rom flashed complete the setup;
,boot phone in fastboot and flash twrp
Next boot to twrp ,allow modification.
Next move orange fox recovery to phone storage while connected on pc .
Flash orange fox ,
now your phone will boot
Into orangefox
Move custom rom of ur choice to phone storage while connected on pc.
Next
,wipe delvik
, system ,
data
cache,
vendor.
Flash any custom rom of your choice .
If phone reboots to orangefox itself just got to wipe and choose format data and type yes;
The after wiping done,
Reboot
complete the setup
Download magisk 21.3 stable
Move to phone storage
Reboot to orangefox recovery
Flash magisk ;
Reboot
Install magisk manager if manager is not showing,
Now your will be rooted
,your done.
Hi,
i was using LineageOS 17.1(Android 10) on my pixel Xl (32 gb storage)
when android 11 came out, I thought I would switch to pixel experience. So I went to their official website and downloaded the android 11 version of pixel XL
There was an instruction guide provided by the developers on how to install android 11
So I followed that and even after applying update from the adb, there was no issue at all
but when I pressed "Reboot to system" Bootloop is happening
Note: I didn't noticed the official instruction first so i installed twrp to flash the rom just like I flashed LineageOS, but in the advance wipe section, there was only 4 option available
-Dalvik / ART cache
-System
-Data
-Internal Storage
there was no cache option
I formatted the data and wiped all of them and tried to both install and sideload the rom but every time during the installation, an error (code 28) occurs
Then I downloaded the rom again hoping that the previos 1 was corrupted and i saw the instruction guide this time.
So I followed the guide and installed their recovery image, flashed recovery partition and flashed the rom using sideload.
But after rebooting the system, Bootloop keeps occurring
*sorry for any misspell or grammatical mistake*
ROM and Recovery image Downloaded from - https://download.pixelexperience.org/marlin (Android 11, 2021/04/16)
ROM and Recovery image installation guide - https://wiki.pixelexperience.org/devices/marlin/install/
I'm having the same issue. Did you flash the repartition zip?
I ended up reflashing stock rom https://developers.google.com/android/images#marlin
Try doing that and restarting the process
GalaxyWhy said:
I'm having the same issue. Did you flash the repartition zip?
I ended up reflashing stock rom https://developers.google.com/android/images#marlin
Try doing that and restarting the process
Click to expand...
Click to collapse
I actually solved the problem a few moments ago
What i did wrong was, when i sideload the rom rom file with twrp i always cleared the dalvik and cache file
let me make a little guide for you..hope that will help
1. install twrp recovery
2. go to wipe section -> advanced wipe -> wipe all 4(Dalvik/ART cache, System, Data, Internal Storage)
3. do a factory reset and format data
4. go to mount section and check all the boxes (system, data, vendor)
5. sideload the repartition zip according to your storage and device model (mine was pixel xl 32gb)
6. after sideload is done reboot the system..it will reboot into recovery again
7. then again sideload the rom file (don't check the clear cache and dalvik boxes)
8. after that is done, go back to main menu and go to reboot-> switch to slot B-> Reboot into system
Hopefully you're done
Note: don't skip any step regarding how minor it is
and if you wish you can also follow the official instruction: https://wiki.pixelexperience.org/devices/marlin/install/
Let me know if it works for you
Best of luck!