How to install Dolby atmos on lenovo zuk z2 plus ?????
Haider** said:
How to install Dolby atmos on lenovo zuk z2 plus ?????
Click to expand...
Click to collapse
https://forum.xda-developers.com/lenovo-zuk-z2/themes/shox-dual-audio-mod-stereo-oreo-t3757616
Haider** said:
How to install Dolby atmos on lenovo zuk z2 plus ?????
Click to expand...
Click to collapse
Before proceeding to install Dolby Atmos on your device.Make sure your device is ROOTED
Magisk Users(recommend):
If you are using Magisk root,then you can download the modules(Dolby Atmos) from downloads section (in Magisk) and install it.
SuperSu Users:
If you are using Supersu,then you need to install Xposed installer and install the Dolby atmos xposed module from the downloads section and then install & active.
Best Module: I would recommend using VIPER4ANDROID for better performance (available on both Magisk & Xposed)
Mohith Chowdary said:
Before proceeding to install Dolby Atmos on your device.Make sure your device is ROOTED
Magisk Users(recommend):
If you are using Magisk root,then you can download the modules(Dolby Atmos) from downloads section (in Magisk) and install it.
SuperSu Users:
If you are using Supersu,then you need to install Xposed installer and install the Dolby atmos xposed module from the downloads section and then install & active.
Best Module: I would recommend using VIPER4ANDROID for better performance (available on both Magisk & Xposed)
Click to expand...
Click to collapse
I get a notification from Google Play Store saying "ViPER4android FX can damage your device" when enabling it through Magisk (Ver: 16.0). It happened in last month also so I disabled then but appeared again today when re-enabled. What might be the problem?
My Z2's ROM is 5.3 - 11 March.
I've already asked this on AEX 5.4 thread though didn't get any reply.
One more question that which Dolby Atmos version should I choose from Magisk downloads section? I see many like ZTE Axon 7, Lenovo A7000, Classic etc.
Can anyone tell me how to install Pixel 2 Experience magisk module on jaguar oreo rom. Im on latest build of rom(8 may release) and module version 4.5 is not installing. Need help!
just install any module there no specific magisk module.. download latest module and flsah via twrp
Hello.
My phone is s8.
I downloaded :
1- lingeage os 17.1 for s8
2- Gapps arm64 android 10 nano
3- magisk
I installed successfuly.
Now i login google play and i want install for example these:
netflix
samsung apps such as samsung music,video , secure folder and etc
the apps version is ok and support android 10.
but i get message :
Your device isn't compatible with this version
please help me.:crying:
Go back to stock rom. Netflix is aggressive with detecting modified devices. Even if you get it to work once, it can break any time.
Samsung apps strongly depend on samsung components not included in lineageOS
If you look at the header and think is is already there ... sorry. But I think we should have a good chance to build it. It is a well supported SoC Snapdragon 622.
Some things that are required are available:
- bootload unlocking
- custom recovery (TWRP / OF)
- kernel sources (https://forum.xda-developers.com/t/xiaomi-has-released-poco-m3-kernel.4205133/)
With that it should be possible to cook something:
[GUIDE] How to build an unsupported rom using sources from other roms
Hello all and welcome to my first how-to guide I began the process of learning about ROM about 4 months ago (so excuse this post if there are any inaccuracies and please feel free to correct me in the comments - I will absolutely update this...
forum.xda-developers.com
How to Build Lineageos rom for any android device Easily ! {Full guide}
Introduction These instructions will hopefully assist you to start with a stock android device, unlock the bootloader (if necessary)...
www.lineageosrom.com
https://medium.com/@daltonfury42/building-lineageos-for-your-device-a7d26ab50549
How to build LineageOS for a device without official support?
I have a Mi 8 Lite (platina), for which there is no official LineageOS support. But LineageOS custom ROM for the device is available on XDA. On further research, I can see that vendor files, device...
android.stackexchange.com
Anyone wants to try?
I'm planning to flash the GSI image of Lineage OS
Waiting for unlock process now...
I thought that most function on this phone is quite usual on any other phones,
so it should be no big issue on flashing GSI?
Tell me if I was wrong..
Sure, that could be first step. Let us see how well treble is implemented.
ping840907 said:
I'm planning to flash the GSI image of Lineage OS
Waiting for unlock process now...
I thought that most function on this phone is quite usual on any other phones,
so it should be no big issue on flashing GSI?
Tell me if I was wrong..
Click to expand...
Click to collapse
already tried to install on mine, and does not start the system after it is installed, twrp shows as if it had no operating system installed!
Gsdark said:
already tried to install on mine, and does not start the system after it is installed, twrp shows as if it had no operating system installed!
Click to expand...
Click to collapse
How did you flash the system.img? I believe you need to restart on fastboot, use the command "fastboot reboot fastboot" and only then "fastboot flash system system.img"
Anyone who has unlocked the bootloader but does not want to format the current Android installation to test a GSI, can test it using DSU first
waiting for this rom
Waiting for custom rom
a CRDroid ROM for POCO M3 please.
The hardware specs are 95% the same as REDMI 9T
No forum for redmi 9T, so i think poco m3 has a little bit chance to get supported soon
lineageos ? ?
yes please
Andy Yan's personal builds // GSI - Browse /lineage-18.x at SourceForge.net
sourceforge.net
This GSI of LineageOS works (arm64_ab variant), also with included Magisk.
https://telegra.ph/GSI-Installation-for-Poco-M3-02-19 Installation guide.
https://drive.google.com/file/d/1cfX-trm11ek12IvqUgKiHXh8bzrTEdzM/view?usp=drivesdk EU vendor.img
https://drive.google.com/open?id=1jl3YLCaAe3SM0npV9xe15k4aoFQ9PVe3 GSI installer
Permissiver v5 you can find online
Also GApps
Bluetooth works with some workarounds. Join POCO M3 official group on telegram for more support http://t.me.com/pocom3globalofficial
Update: Headphone jack works by turning on "Use alternative audio policy" in phh settings > Qualcomm features. Go crazy.
0
ppGabe said:
Andy Yan's personal builds // GSI - Browse /lineage-18.x at SourceForge.net
sourceforge.net
This GSI of LineageOS works (arm64_ab variant), also with included Magisk.
https://telegra.ph/GSI-Installation-for-Poco-M3-02-19 Installation guide.
https://drive.google.com/file/d/1cfX-trm11ek12IvqUgKiHXh8bzrTEdzM/view?usp=drivesdk EU vendor.img
https://drive.google.com/open?id=1jl3YLCaAe3SM0npV9xe15k4aoFQ9PVe3 GSI installer
Permissiver v5 you can find online
Also GApps
Bluetooth works with some workarounds. Join POCO M3 official group on telegram for more support http://t.me.com/pocom3globalofficial
Update: Headphone jack works by turning on "Use alternative audio policy" in phh settings > Qualcomm features. Go crazy.
Click to expand...
Click to collapse
OK Google and Google Voice Typing do not work. Could you inform the developer about it? Perhaps somebody can find workaround.
Rama Himura said:
OK Google and Google Voice Typing do not work. Could you inform the developer about it? Perhaps somebody can find workaround.
Click to expand...
Click to collapse
I'm not really the person to ask about this. I've just pulled those from the telegram group. You can join the telegram group, there's definitely more knowledgeable people there.
LineageOS 17.1 - UNOFFICIAL | Android 10.
Released : 16/03/'21
Download https://drive.google.com/file/d/1TelSo8YXBN6BxSaJVOW791q6B9RQLVG8/view
Changelog:
• Initial build
• RIL Fixed
• Fixed random reboots
• Added fixed partition sizes for
/system , /product
Note:
• Clean flash
• Gapps not included
• Flash any gapps you want
By Jhem
Join - @PocoM3OfficialPH
Follow - @PocoM3UpdatesPH
#Lineage #Unofficial #ROM #Q #Citrus
twrp_citrus-POCOM3_3.5-1.A10-08-03-2021-D-BL.imghttps://androidfilehost.com/?fid=2188818919693749308
juve60tet said:
LineageOS 17.1 - UNOFFICIAL | Android 10.
Released : 16/03/'21
Download https://drive.google.com/file/d/1TelSo8YXBN6BxSaJVOW791q6B9RQLVG8/view
Changelog:
• Initial build
• RIL Fixed
• Fixed random reboots
• Added fixed partition sizes for
/system , /product
Note:
• Clean flash
• Gapps not included
• Flash any gapps you want
By Jhem
Join - @PocoM3OfficialPH
Follow - @PocoM3UpdatesPH
#Lineage #Unofficial #ROM #Q #Citrus
Click to expand...
Click to collapse
Should be noted that there is still a bluetooth bug in this version, but I'm sure it'll get fixed, devs know what they're doing Test and provide feedback people!
I tried this on my EU Poco M3 with 4GB RAM and 8GB flash and it failed to boot. I think it failed immediately after the bootloader so probably the kernel had some boot error while booting.
Installed LOS and it booted up and works great except for Bluetooth. Can't wait for further updates, been holding off using my M3 until now.
Works like charm for a initial build, very thx
Here my way to got it running:
1. Unlock Bootloader
2. Tried TWRP Fork but messed with the reboot ^^ (i was just to dump)
3. Tried OrangeFox Fork from here
4. Important! After recoveryflash via fastboot, hold down power and vol+ button until Orange Fox appears on screen (normal restart causes recovery image to get wiped out. I told you i was to dump in the first place so i didn't try TWRP again but i guess would also work)
5. Stock Rom seemed after Install dead to me, because of stuck at MIUI Logo (but maybe i did not wait long enough and i updated to 12.0.7. befor and did a factory reset)
6. OrangeFox showed that Partitions are encrypted.
7. Got Xiaomi EU Rom here (I used 12.0.4 because 12.0.6. were taken off again yesterday while i downloaded it.. lol)
8. In OrangeFox now i wiped all cache, dalvik and data (Need because of encryption) but do no restart after it (i did restart one time to see what happens to the encryption, but i had in mind i got a problem after it, so you should try without restart first)
9. Flash Xiaomi EU Rom with OrangeFox (tried to boot after flash into this rom but stuck on MIUI Logo, but maybe did not waited long enough again^^)
10. Flash LineageOS 17.1 from juve60tet and wipe caches again and reboot.
11. Working Lineage OS on Poco M3
Bugs i noted:
Bluetooth as already known
Fingerprint sensor selects Wigeds/Icons on Homescreen like when navigating with a keyboard or a controller in Android.
This is a temporary guide until an official XDA thread of crDroid 9 by the maintainer is out
I'm posting the latest ROM info, install method and files for the users who are crDroid fans like me
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
I'm not the maintainer or a crDroid dev
crDroid is a vanilla ROM, so there's no Gapps included
You don't have to be on OOS 13 to install the new CrDroid update as OOS 13 Framework is included
If you're on an OOS 12 or 13 based Custom ROM -> reboot to recovery -> factory reset then follow the clean flash method
The vbmeta and recovery.img files are from the payload.bin file of the ROM.zip file
The .img files are compressed into a .zip file and the tool I used to extract them are attached below
Flashing Instructions:
For flashing/getting OOS 12 in both slots:
Use Msmtool to come back on oos 11.
Download latest full zip of oos 12 from Oxygen Updater app or from OxygenOS builds XDA thread (You need to know your model number!)
Download and install the OPLocalUpdate apk from this XDA thread
Go into Settings -> system update -> local upgrade
Find the OOS 12 .zip you just downloaded from oxygen updater
Install it and reboot
Repeat steps 4 to 6 (To install OOS 12 on both slots)
Unlock bootloader
For first time install/ Clean Flash:
Have an unlocked bootloader & OOS 12 (C20 - C36) flashed to both slots.
Download ROM the file named like this: crDroidAndroid-13.0-XXXXXXXX-instantnoodlep-v9.X.zip
Download vbmeta, recovery for your device which is in the .zip file attached below
Put it in the same folder where your ADB/platform-tools files are
Reboot to bootloader
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
Choose "Factory reset"
Choose "Apply update" -> "Apply from ADB"
adb sideload "crDroidAndroid-13.0-XXXXXXXX-instantnoodlep-v9.X.zip"
Reboot to recovery.
Choose "Apply update" -> "Apply from ADB"
adb sideload gapps.zip (Nikgapps basic or full recommended)
If you want to install NikGapps Addons do this
Otherwise, go to the next suggestion if you want root or just reboot to system. Up to u
Reboot to recovery
Choose "Apply update" -> "Apply from ADB"
adb sideload addons.zip
Repeat step 1 - 2 for other addons
If you want root do this
Reboot to recovery
Choose "Apply update" -> "Apply from ADB"
adb sideload magisk.zip
OR adb sideload magisk.apk
Reboot to system & Enjoy!
Otherwise, just reboot to system. Up to u
To update:
Download ROM the file named like this: crDroidAndroid-13.0-XXXXXXXX-instantnoodlep-v9.X.zip
Put it in the same folder where your ADB/platform-tools files are
Reboot to recovery
Choose "Apply update" -> "Apply from ADB"
adb sideload "crDroidAndroid-13.0-XXXXXXXX-instantnoodlep-v9.X.zip"
Reboot to system & Enjoy!
Recommended Gapps:
NikGapps-T basic or full
- T is for Android 13
- SL is for Android 12.1/12L
- S is for Android 12
Recommended NikGapps Addons:
More about NikGapps Addons is in the "NikGapps Addon info" post below
SetupWizard addon
Sources:
ROM: https://github.com/crdroidandroid
Download:
Temporary Links:
Until it's on the official site
ROM: download
Flashing files: download
Official Links:
ROM: download
NikGapps: download
NikGapps Addons: download
OOS versions for OP8Pro (under Signed Flashable zips) Here
Changelog: Changelog
crDroid OnePlus 8 Telegram group
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to support the dev
XDAevDB Information
crdroidandroid, ROM for the OnePlus 8P
Contributors
Saurabh Parab
Source Code: https://github.com/crdroidandroid
Updates:
28/10/22 - crDroid v9.0 Unofficial build was released for OP8 & OP8 Pro
Android: 13
Based on: OOS 12 Framework
Security Patch: October (2022-10-05)
Notes:
Need Clean Flash
"The Bootloader is unlocked" screen is removed
Widevine L1 and HDR works
Kcal and per-app refresh rate is here
Screen resolution changer in display settings (1080P FHD+ and 1440P QHD+)
Issues:
No OTA and will be available in next update
No face unlock
No OOS cam
There's risk of poor SoT/battery life
Call recorder has issues
Google photos brightness bug
30/10/22 - Created this thread to help users install latest crDroid 9
11/11/22 - Anticipated official Crdroid 9.0 will come out soon
Based on: OOS 12 Framework
Security Patch: November (2022-11-05)
Notes:
This will be official build with OTA feature
Face unlock will work
No OOS cam
25/12/22 - Official crDroid 9.0 is released!
Based on: OOS 13 Framework
Security Patch: December (2022-12-05)
Notes:
Has OTA Update feature
Face unlock works
No OOS cam
Google photos brightness bug is fixed
New parallel apps with crDroid Launcher only
Issues:
When swiping on lock screen to allow face unlock doesn't work
Google Dialer UI becomes enlarged during calls in QHD+ resolution
26/12/22 - Updated method and added necessary files to install new update
NikGapps Addon info:
These issues were from crDroid 8 (A12.1)
Gboard
For Gboard users, deleting text in the text suggestions tab won't work unless u install the Gboard addon. But it needs to be installed before setting ur device up
A factory reset is needed for it to work, so don't flash it if u got everything set up
GoogleSearch
For google assistant users, "hey google" will not work without installing the GoogleSearch addonas the "google app" needs to be a system app.
But supposedly on crDroid 9 this issue doesn't happen and "hey google" works without the addon
Excellent ROM on my IN2025 with Verizon SIMM. Thanks for your hard work on this!
HolyHog said:
Excellent ROM on my IN2025 with Verizon SIMM. Thanks for your hard work on this!
Click to expand...
Click to collapse
Thanks, but I'm sorry to say that I'm not the maintainer/dev for this ROM.
It's in the disclaimer as well and I cannot take any credit
All I did was create this XDA thread to share this great ROM with people who aren't aware of it
It's good to hear that u managed to install it and everything is going well for you
When official will be released?
this is also my question
crDroidAndroid-13.0-20221223-instantnoodlep-v9.0 has been posted on sourceforge.net. Will there be a separate branch for crDroidAndroid-13.0.
zement said:
crDroidAndroid-13.0-20221223-instantnoodlep-v9.0 has been posted on sourceforge.net. Will there be a separate branch for crDroidAndroid-13.0.
Click to expand...
Click to collapse
Do u mean a XDA thread for crDroid 9.0? For that idk as I'm not the dev/maintainer
New Update!
CrDroid v9.0 is out
[ROM][13][OFFICIAL][OP8 /8 Pro/8T] crDroid v9.0 [23.12.2022]
*** Disclaimer I am not responsible for any damage you made to your device You have been warned crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features...
forum.xda-developers.com