Hello,
i just get a 8t (willow) could you tell me if i can install weekly eu miui ginkgo on willow or if it will doesnt boot ? (I know i will lost nfc but can we do it)
https://xiaomi.eu/community/threads/20-3-26-last-miui-11.55066/
Thank you for your answer
I think since it's almost the same hardware it should theoretically boot but you will definitely loose nfc.
I have tried, you may brick your device!
Voniaak said:
Hello,
i just get a 8t (willow) could you tell me if i can install weekly eu miui ginkgo on willow or if it will doesnt boot ? (I know i will lost nfc but can we do it)
Thank you for your answer
Click to expand...
Click to collapse
It is okay to flash EU ginkgo in Willow. but inorder to flash it the updater script should be edited to remove the device check for Ginkgo (the assert line).
But keep in mind that doing unnecessary edits will cause problems. You will lose NFC support if you use Ginkgo EU in willow as Ginkgo doesn't have NFC hardware. Do a small research on editing the updater script .
Ok thank you so OTA update will not work true ?
do not do it you will make a brick, if you want to do it, you only have to flash boot, system and vendor if you will not make a big brick that you only recover with an authorized account.
Enviado desde mi Redmi Note 8T mediante Tapatalk
you may fastboot flash stock ginkgo system.img, it's ok. but the eu ginkgo will brick your device!
Related
it would be possible to load the global rom of A2 Lite in Redmi 6 pro, thanks
If it's like the Mi 5X and Mi A1 situation (and probably it is), the answer is no.
If you want to risk (but I warn you that the risk to brick your phone is high, and it's all your responsibility, you can flash the full Mi A2 Lite ROM from here via MiFlash or via fastboot. If something goes wrong you can try to flash back the Redmi 6 Pro ROM from here, always via MiFlash or fastboot.
EDIT: I downloaded the full ROMs of both phones, and after a quick comparison, I can see that they use a different partitioning scheme (classic for 6Pro, A/B type for A2L), so 99,9% a direct ROM flash won't work (just like Mi A1).
thank friend, I will not try.
I need global versión for spanish lenguaje.
thanks again for solving my question.
Why don't you use the Xiaomi.eu version?
First of all, you must unlock the bootloader of your phone.
Then you need a working TWRP. This one is confirmed working but you need to register in this German forum to download it.
Then go to Xiaomi.eu forum and download the latest beta for HM6Pro (I usually prefer the stable version, but it's not ready yet for 6Pro) and flash it via TWRP.
I have some doubt
the unlocking of the bootloader is the same as for A1 and all Xiaomi?
What is the latest beta version?
sorry for my ignorance
Very thanks.
Sirkaoss said:
the unlocking of the bootloader is the same as for A1 and all Xiaomi?
Click to expand...
Click to collapse
No, for the MIUI phones this is the unlocking process (it's the tutorial for the Redmi Note 4X, but it works for every MIUI phone).
For the Android One phones (i.e. Mi A1, Mi A2 and Mi A2 Lite) the unlocking is extremely simpler.
Sirkaoss said:
What is the latest beta version?
Click to expand...
Click to collapse
You can find the latest beta here.
Go to the newest directory and search for the ROM with the name "xiaomi.eu_multi_HM6Pro..." (remember that HM6Pro is your phone code, while its nickname is "sakura"). If you can't find the image for your phone on the newest directory, search it on the second newest directory, and so on.
There is usually a new beta every 7 days, but you don't need to update every week if the phone is working without problems.
okay friend, I'll try. Thank you very much for the help. If I have any doubt I will bother you again.
?
Hi, i'm running stock android one oreo 8.1 on my Mi A2 Lite. Can i flash it with Miui rom?
MiXiomi said:
Hi, i'm running stock android one oreo 8.1 on my Mi A2 Lite. Can i flash it with Miui rom?
Click to expand...
Click to collapse
No.
As I said above, you cannot flash A2 Lite ROM on Redmi 6 Pro. That means you cannot flash Redmi 6 Pro ROM on A2 Lite, too.
I would like to do the opposite. Installing the xiaomi.eu on the MiA2 Lite as I prefer MIUI over AOSP interface.
Is it possible without risks? I fear the double partition prevent me from succeding
Zanbot3 said:
I would like to do the opposite. Installing the xiaomi.eu on the MiA2 Lite as I prefer MIUI over AOSP interface.
Is it possible without risks? I fear the double partition prevent me from succeding
Click to expand...
Click to collapse
It's not very safe to do, and 99% it will not work. But if you want to take the risk, do it. Just keep ready the daisy fastboot ROM for fixing. And don't lock the bootloader or the damage will be unrecoverable.
May be my question is stupide, but is it possible to change the partitioning scheme from A/B type to classic for example. If it will be, can changing easy the ROM? Or something else? If it possible, how can I do this?
Thank you!
dedovoto said:
May be my question is stupide, but is it possible to change the partitioning scheme from A/B type to classic for example. If it will be, can changing easy the ROM? Or something else? If it possible, how can I do this?
Thank you!
Click to expand...
Click to collapse
I already wrote how it could be possible: flashing the Redmi 6 Pro ROM in EDL mode.
But you need permission from Xiaomi to flash in EDL mode, and you can flash only one time for account.
You can ask for permission on en.miui.com forum.
And, as I said, I would not try that on my phone.
I have already unlocked the bootloader but I have a question, and tried to install the ROM through Xiaomi miflash and I get error (miflash can not found file flash_all_lock.bat). Also read in this forum that there is possibility of bricked for version 9.6.17.0, this is true?
Any Update ? OR Any Improvement ?
O Have mi A2 Lite, Android one don't like me. Miui.eu Rock!!! Anyone port this ROM please
Hello to all
Someone know if exist a porting or custom miui 12 to try on willow?
Thanks
not yet and just in case do not even think about to flash a gingko rom for willow
I don't think to flash ginkgo rom on my willow....
Hi all,
Have been back for a query. I have a Mi 11x 5G India variant. I had installed Miui EU ROM long back when Mi 11x 5G India variant was supported by Miui EU ROM developers but in between that is around February 2022 onwards devslopers had removed support for Mi 11x 5G India variant and installing such ROM was causing issues even though Poco F3 and Mi 11x 5G India are basically same handset. There was a workaround for installing that EU ROM on Mi 11x India but I never done it.
Now I have found out that they i.e., MIUI EU ROM have again started providing ROM support for Mi 11x India device. Hence my query is how do I update to the lastest Miui eU ROM.
I am already on Miui EU ROM where version is V12.5.18.0.RKHCNXM. Now the lastest EU ROM is V14.0.5.0.TKHCNXM. The latest ROM is a Hybrid ROM which means it can be installed via Recovery and fastboot both ways.
My query is can I update to the latest ROM directly by just downloading the ROM package and do a update via Recovery or do I have to follow some other procedure. I don't want to loose my data.
Please help. Thank you in advance.
Going from A11 to A13 seems tricky without formatting the data.
Personally I would flash the latest A12 then the A13 by changing TWRP for the non-hybrid versions.
Hi everyone... Awaiting for replies from people here. I seriously want to understand how do I proceed
Flash the latest V13 with the Twrp then flash the latest V14 in fasboot mode with the update.bat file.
Update the Twrp if you want to use the Ota rather than the Fastboot method.
NOSS8 said:
Flash the latest V13 with the Twrp then flash the latest V14 in fasboot mode with the update.bat file.
Update the Twrp if you want to use the Ota rather than the Fastboot method.
Click to expand...
Click to collapse
Sorry for my question again. Miui EU hadn't had support for Mi 11x for almost a year now. The last they released a build was v12.5.19.0 which I never upated to. Post this they released HMK40_POCOF3_V13.0.2.0.SKHCNXM_v13-12-fastboot.zip. And from hereon whenever someone updated this in Mi 11x 5G Indian variant there were some software issues. And they continued with this till v13.0.7.0. And now they have again started giving support for Mi 11x 5G Indian variant aliothin device with update HMK40_POCOF3_V14.0.4.0.TKHCNXM_v14-13.zip. So please let me know what I should do. I am on Android 11 with Miui 12.5 and there was no Miui 13 with Android 12 for Mi 11x Aliothin device. And now they have released Miui 14 with Android 13.
I am really confused as to what to do. Will be very thankful if you keep it simple.
VJ_1985 said:
Hi all,
Have been back for a query. I have a Mi 11x 5G India variant. I had installed Miui EU ROM long back when Mi 11x 5G India variant was supported by Miui EU ROM developers but in between that is around February 2022 onwards devslopers had removed support for Mi 11x 5G India variant and installing such ROM was causing issues even though Poco F3 and Mi 11x 5G India are basically same handset. There was a workaround for installing that EU ROM on Mi 11x India but I never done it.
Now I have found out that they i.e., MIUI EU ROM have again started providing ROM support for Mi 11x India device. Hence my query is how do I update to the lastest Miui eU ROM.
I am already on Miui EU ROM where version is V12.5.18.0.RKHCNXM. Now the lastest EU ROM is V14.0.5.0.TKHCNXM. The latest ROM is a Hybrid ROM which means it can be installed via Recovery and fastboot both ways.
My query is can I update to the latest ROM directly by just downloading the ROM package and do a update via Recovery or do I have to follow some other procedure. I don't want to loose my data.
Please help. Thank you in advance.
Click to expand...
Click to collapse
if you flash it and it works do let me know. also check whether jio 5g works with eu rom or not.
i installed the miui 13 elite rom when eu rom was not supported.
VJ_1985 said:
Sorry for my question again. Miui EU hadn't had support for Mi 11x for almost a year now. The last they released a build was v12.5.19.0 which I never upated to. Post this they released HMK40_POCOF3_V13.0.2.0.SKHCNXM_v13-12-fastboot.zip. And from hereon whenever someone updated this in Mi 11x 5G Indian variant there were some software issues. And they continued with this till v13.0.7.0. And now they have again started giving support for Mi 11x 5G Indian variant aliothin device with update HMK40_POCOF3_V14.0.4.0.TKHCNXM_v14-13.zip. So please let me know what I should do. I am on Android 11 with Miui 12.5 and there was no Miui 13 with Android 12 for Mi 11x Aliothin device. And now they have released Miui 14 with Android 13.
I am really confused as to what to do. Will be very thankful if you keep it simple.
Click to expand...
Click to collapse
My bad sorry, forced to flash the latest V14(stable or weekly) with the first.install.bat file (your data will be erased).
You can use Micloud or third-party apps to back up your data.
you can try the Elite Rom here on XDA by HassanMirza. That is based on EU rom. I just installed it.
Just a quick question, can I flash a Global firmware of Redmi Note 9T 5G on my japanese version of the phone? Because on my japanese version of Redmi Note 9T 5G it has only 1 imei which means I can only use one sim card on the phone while the global version of the device is suppose to support up to 2 sim cards and micro sd card at once. Really appreciate if you can answer my question, thanks!.
Could you post the identification of the model (my phone/characteristics/model)?
It's a Japanese market Redmi note 9T 5G device (Cannong-A001XM). It's running MIUI global 12.0.12.0 (QJEJPSB) android 10 Softbank carrier-specific version
As you can see on the links below, no JP rom for this device.
Surely a model only for Japan and even by flashing a global rom it will not change anything, HW level not SW, like the bands on the CN versions.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Redmi Note 9T (cannong) Europe (EEA) Fastboot & Recovery ROM | XiaomiROM.com
Xiaomi Redmi Note 9T (cannong) Europe (EEA) official ROM, include stable, weekly and beta MIUI firmware which can be updated with Recovery and …
xiaomirom.com
So, does it mean I can safely install a global firmware on this device without brick my device?
You will first need to unlock the bootloader (will erase your data).
Xiaomi Community
new.c.mi.com
Apply for unlocking Mi devices
en.miui.com
The device already has boatloader unlocked, if you can help me a procedur to flashing global rom on this Redmi note 9T, sorry for bad English
From what I've seen, the Japan version has dual sim.
It's probably the carrier's rom that's blocking.
Use this tool with this rom(will erase your data)
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Package Name: cannong_global_images_V13.0.4.0.SJEMIXM_20221116.0000.00_12.0_global_3ea29c9df3.tgz
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Don't lock the bootloader.
Do I have to use the provided firmware package? Beacuse I want to install the miui 12.5 instead miui 13
IzadMy said:
Do I have to use the provided firmware package? Beacuse I want to install the miui 12.5 instead miui 13
Click to expand...
Click to collapse
This device is currently in A13 and you want to install an A11?
Use this one.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
I managed to install the global firmware, but it was missing the imei, both imei 1 and imei 2 is unavailable. What should I do?
IzadMy said:
I managed to install the global firmware, but it was missing the imei, both imei 1 and imei 2 is unavailable. What should I do?
Click to expand...
Click to collapse
Try to flash
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
post edited
Is the procedur to install is the same?
IzadMy said:
Is the procedur to install is the same?
Click to expand...
Click to collapse
Yep, same ,with Fastboot rom V12.0.5.0.QJEMIXM(dont re lock the bootloader).
I have insalled the provided version of Miui but still the status of imei is unavailable, what should I do now?
IzadMy said:
I have insalled the provided version of Miui but still the status of imei is unavailable, what should I do now?
Click to expand...
Click to collapse
You must have your imei (on the box).
Try Try these tools
Download MTK IMEI Writer Tool for Any MediaTek device
In this guide, we bring you the MTK IMEI Writer Tool. It enables you to write the IMEI number on smartphones running on the MediaTek Chipset.
www.getdroidtips.com
MTK IMEI repair tool ModemMETA All Version MediaTek CPU
ModemMETA All Version MediaTek CPU Tested Tool Working Vivo Tecno Infinix & More Download Modem Meta Tool Repair IMEI
www.officialroms.com
Yes I still have the imei 1 on back sticker of the phone, what about imei 2? Where should I get it?
IzadMy said:
Yes I still have the imei 1 on back sticker of the phone, what about imei 2? Where should I get it?
Click to expand...
Click to collapse
Don't worry about it.
Sorry, but where can I find the japanese rom for this device? It seems both provided solution is not work for me, I guess the only way is to flash back the original japanese rom, I tried to find it myself but I don't see any of xiaomi rom related to japanese rom, please help
I have already searched and not found, very few results and the only one that contains the name of the rom
SoftBank Xiaomi Redmi Note 9T Part4
is inaccessible (try to confirm).
try to see with SoftBank.
where's global rom? not yet?
Wait for the release of the poco F5 assuming that the roms are compatible with the redmi note 12 turbo.
simplebaech76 said:
where's global rom? not yet?
Click to expand...
Click to collapse
Too early from what I can tell. Patiently waiting as well hehe.
I wouldn't be surprised to have to wait at least a month.
simplebaech76 said:
where's global rom? not yet?
Click to expand...
Click to collapse
红米 Note 12 Turbo / POCO F5 (marble) 全球版 Fastboot 线刷包 & Recovery 卡刷包 ROM | XiaomiROM.com
红米 Note 12 Turbo / POCO F5 (marble) 全球版 官方 ROM，含稳定版、开发版/内测版 MIUI。 刷机包以安装方式区分，包括 Recovery 卡刷包 及 Fastboot 线刷包 (需要 mi flash tool)。 这是一个完整的红米 Note 12 …
xiaomirom.com
Global ROM here: https://miuirom.org/phones/poco-f5
Edit: Tried flashing on Redmi Note 12 Turbo, but it booted into recovery with error: "This MIUI version can't be installed on this device"
Lusberg said:
Global ROM here: https://miuirom.org/phones/poco-f5
Edit: Tried flashing on Redmi Note 12 Turbo, but it booted into recovery with error: "This MIUI version can't be installed on this device"
Click to expand...
Click to collapse
Are you using a fastboot rom?
NOSS8 said:
Are you using a fastboot rom?
Click to expand...
Click to collapse
Yes, I am using the fastboot ROM: marble_eea_global_images_V14.0.2.0.TMREUXM_20230320.0000.00_13.0_eea_4bd5593a1d.tgz
Lusberg said:
Yes, I am using the fastboot ROM: marble_eea_global_images_V14.0.2.0.TMREUXM_20230320.0000.00_13.0_eea_4bd5593a1d.tgz
Click to expand...
Click to collapse
with Miflash or directly with the bat file?
So the Poco roms are not compatible with the 12 turbo.
NOSS8 said:
with Miflash or directly with the bat file?
So the Poco roms are not compatible with the 12 turbo.
Click to expand...
Click to collapse
I am using MiFlash. Haven't tried to use the bat files directly.
Seems that they are not compatible.
I will try to flash it a few more times, then back to official China ROM for now.
Lusberg said:
I am using MiFlash. Haven't tried to use the bat files directly.
Seems that they are not compatible.
I will try to flash it a few more times, then back to official China ROM for now.
Click to expand...
Click to collapse
Can you post the flash_all.bat file?
NOSS8 said:
Can you post the flash_all.bat file?
Click to expand...
Click to collapse
Yes, here it is
I see nothing to change on this file compared to the others, maybe an ARB problem, what is the version of the CN rom on the device?
Okay! Here's what I did to get it working!
When first flashing from Redmi Note 12 Turbo China ROM to Poco F5 EEA ROM, I used flash_all_lock.bat. This did not work. However, when I used MiFlash Unlock afterwards, then it booted!
Anyone trying this, please use the Flash_all.bat script or do what I did explained above.
At this point I can confirm that Poco F5 Global ROM works on Redmi Note 12 Turbo
Lusberg said:
Okay! Here's what I did to get it working!
When first flashing from Redmi Note 12 Turbo China ROM to Poco F5 EEA ROM, I used flash_all_lock.bat. This did not work. However, when I used MiFlash Unlock afterwards, then it booted!
Anyone trying this, please use the Flash_all.bat script or do what I did explained above.
At this point I can confirm that Poco F5 Global ROM works on Redmi Note 12 Turbo
Click to expand...
Click to collapse
You were lucky not to brick your device with Miflash using the flash_all_lock.bat file.
On a CN device always use the flash_all.bat file to flash a rom other than CN.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
NOSS8 said:
You were lucky not to brick your device with Miflash using the flash_all_lock.bat file.
On a CN device always use the flash_all.bat file to flash a rom other than CN.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
Yep, that info was new for me - didn't know you can't lock the bootloader when going from China to Global ROM.
Lusberg said:
Yep, that info was new for me - didn't know you can't lock the bootloader when going from China to Global ROM.
Click to expand...
Click to collapse
Lucky man,to have the play store certified you will have to root and use some magisk modules or install a Xiaomi Eu rom.
Poco F5 (global version of Redmi Note 12 Turbo) launched today. So just get that if you want a global ROM.
NOSS8 said:
Wait for the release of the poco F5 assuming that the roms are compatible with the redmi note 12 turbo.
Click to expand...
Click to collapse
Hello
I am form Portugal and i have in my POCO F5 the global room 14.0.4, its possible to change the rom for the European 14.0.6 without problems? Thanks
zcaldeira said:
Hello
I am form Portugal and i have in my POCO F5 the global room 14.0.4, its possible to change the rom for the European 14.0.6 without problems? Thanks
Click to expand...
Click to collapse
Yep, but you have to unlock the bootloader first then use Miflash.
Your phone will not be better with an EEA rom (rom for Europe), for example you will have a limited sound volume.
The best (in my humble opinion) are the Xiaomi Eu roms.
_____________________________________________________________________________________________________________________
Unlock bootloader
Xiaomi Community
new.c.mi.com
Apply for unlocking Mi devices
en.miui.com
NOSS8 said:
Yep, but you have to unlock the bootloader first then use Miflash.
Your phone will not be better with an EEA rom (rom for Europe), for example you will have a limited sound volume.
The best (in my humble opinion) are the Xiaomi Eu roms.
_____________________________________________________________________________________________________________________
Unlock bootloader
Xiaomi Community
new.c.mi.com
Apply for unlocking Mi devices
en.miui.com
Click to expand...
Click to collapse
Thanks for the advise