Hello Guys,
i have a problem with a Huawey Y6 Pro 2017. The situation is difficult. Phone boot normally till pincode lock screen.
I don't have pinlock. Also if i boot phone in fastboot mode, fastboot window show that phone is locked and frp is locked.
If i start phone for a factory reset pressing power botton and + volume botton, phone arrive EMUI showing update process locked to 5%...
I tried to download firmware and follow upgrade procedure using SD card but i receive an error: big red esclamation mark and a message that show "software install failed" get help from...(I can't insert because i'm new user). Any idea about What i can do for solve?
Related
Guys I need help ...this morning my phone Huawei Nova 3e restarted while charging and got stuck on huawei logo screen. i tried different combinations of Power + Volume up and down buttons but it didnt go to any other screen. then i installed hisuite on my PC and connected to my phone through USB cable, and holding volume down button i got to this screen which says FAST BOOT&RESCUE MODE and further reads "Phone Locked" "FRP Lock" in the end below Android logo.
i want to access my phone contents and get backup as I have important files to recover. Please I need some help on how to unlock the huawei and get my imp files from phone. If anybody can provide me the steps, I would highly appreciate it.
Thanks in advance
hi everyone, today i tried to upgrade my g7 G710ULM whith LGUP but in the procees i got an error, now i have the phone stucked into a fastboot screen like that:
Press the volume key to select, and press power key to select
Welcome to fastboot for bootloader unlock:
please check "Enable OEM unlock" in developer options
* Quick guidance
1)Read device ID
:fastboot oem device-id
2)Write Unlock Key
:fastbook flash unlock unlock.bin
3)Check bootloader is unlocked
:fastboot getvar unlocked
i can't pass this screen, i tried whit fastboot reboot but get the same, tried to hard reset but i get de same screen afer select yes option, when i try to get into download mode get de same screen as soon as i enter this mode.
any ideas to solve this problem?
Lo resolviste bro?
re flash correct stock KDZ file with newer LG up V1.15
Hold vol dwn and power till it shuts off then quickly plugin the usb cable from your pc and hold vol up while you plug it in and wait till download mode shows up.
I unlocked bootloader and wanted to install Magisk with TWRP but it kept giving me Error 1 saying "boot image patched by unsupported programs, please restore stock boot image" so I searched for the boot.img, transfered to internal device of the phone and flash it but I didn't do wipe data and now my phone is stuck in "your device has been unlocked and can't be trusted" message. I tried powering off by pressing the power off button, it goes on black screen for a couple of seconds then gets back to the same message screen, same with trying to enter into recovery mode by pressing power and volumen down button, comes back and gets stuck in the same screen, I tried connecting to pc with usb but doesn't recognize it. I dont know what to do please help me
Has done, if no longer needed can be deleted
solved
Download Mode:
1 Step: Device switched off
2 Step: Keep volume up and down pressed
3 Step: Connect the keys to a PC via USB-C while keeping them pressed
Hi Guys,
I bought a Note+ (N975f, DBT) used. Since it has a crack on the front and was therefore cheap, I wanted to root it.
because as a newbie I am not allowed to insert external links, here only hints:
Following the instructions of topjohnwu with Magisk
However, it did not work. It is always at this point, red marked:
"Unlocking Bootloader
Unlocking BL on modern Samsung devices have some caveats, so I figure this would be helpful.
Allow bootloader unlocking in Developer options → OEM unlocking
Reboot to download mode: reboot and press the download mode key combo for your device.
Long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
failed.
In download mode when pressing Vol + key the following appears in red
"Reboot Recovery Cause: BL: Recovery Mode Set by key"
I have tried several times and I got this version from
samfw firmware/SM-N975F/DBT/N975FXXU6DTJ4
is used.
I assumed that it is because of the firmware then I used this version
SM-N975F_10_20201103172903_jy9pngyoln_fac
from Frija is used.
For flashing I used Odin3-v3.14.4.
After the last try with the version from Frija (Odin didn't show an error) a screen with a photo of the mask of Kylo Ren appears after Samsung. After 1 minute it starts again.
it is this picture
soyacincau 2019/11/191120-samsung-note-10-wallpaper-preview jpg
In Odin it is detected, but flashing again is not possible it stops at "SetupConnection".
I can only turn off the phone when it is connected to the PC and hold down Bixy/Power + Vol up.
Can I still save it, if so how?
Thanks in advance
Hi,
My S8+ got corrupted after an OS upgrade back in March 2020. It started with the phone running slow. Tried booting, but it continued running slower and slower. Now the phone won’t boot. Only the Samsung logo shows and still it’s running slow.
I’ve tried replacing all of the ROM using Odin with the proper ROM files, but Odin fails due to the phone being locked, i.e. Flash Rom Protection (FRP) = ON. See attached screenshot.
How can I disable FRP without being able to enter any menu from the OS or Android?
The only menu I’m able to enter is the Download Mode, which is holding Brixby, Down and Power for some seconds and then pressing Up.
Regards,
Jostein