This is just a simple Xposed module that disables pulling down the notification shade / quick settings tiles while on the lock screen (but doesn't break media player controls on lock screen). Only tested on Pixel 4 and Pixel 4 XL on Android 10 (more on this later).
Background: This has always been an annoying aspect of Android for me, and it's dumb from a security standpoint. Being able to pull down the quick settings tiles on a locked phone is dumb. Why hasn't Android natively built this in yet? Using this and Gravity Box to disable power menu on lock screen makes me feel a lot better in the event my phone ever gets lost or stolen. It's dumb that anyone can steal your phone and immediately toggle your settings (turn off WiFi, Mobile Data, toggle Airplane Mode, etc) and/or turn the phone off... I've been spoiled for years by the OG HTC devs (particularly LeeDroid and Team Venom) and their ROMs with these features baked in, so it's back to using Xposed to fill that gap for me and my wife, lol. Anyway, I pair these mods along with the Lockwatch app from Play Store and it gives me more peace of mind. Hey, anything to increase the chances of recovering a lost or stolen phone, am I right?
Credits / Technical Details: This module is based off of char101's published Xposed Repo module, and all credits and thanks should go to him. This is the first app / APK I've compiled so it was a nice learning experience, but it was all based off of his source and I really just needed to remove a few lines of code to get it to work properly with our phones. His mod worked fine and disabled the quick settings pull down on the lock screen, as intended. The problem was that it would also prevent media player controls from functioning (and I would assume other possible functions as well). To fix this, I just removed DISABLE2_NOTIFICATION_SHADE references from the code, leaving DISABLE2_NONE and DISABLE2_QUICK_SETTINGS untouched. The mod still works perfectly as intended. Only tested on Pixel 4 / 4 XL on Android 10. I'm sure it would work on other devices as well.
I really just did this on a whim for me and my wife's own phones and wasn't planning on sharing it, but I figure other people may have also wanted this for their P4's as well, so enjoy. Again, all thanks go to @char101!
Installation:
- Download .APK file attached to this post.
* If you have char101's original module installed already, I would highly recommend uninstalling it first.
- It's an Xposed module. Install the APK and enable in your Xposed Manager.
- Reboot and test.
Based on: https://repo.xposed.info/module/com.github.char101.qslock
Source for modified module: https://github.com/i5lee8bit/xposed-qslock-P4mod
Just noticed something that worried me at first, but turned out to be nothing of concern afaik, but in case anyone else gets spooked by it: I just noticed last night that if you launch the camera while on the lock screen, you can still pull down the notification shade. Same can be said for other apps that can be active over lock screen (e.g. Phone app during active call).
However, the quick settings are still inaccessible while locked. The notification contents that do show will follow the same rules as your settings, so if you have it set to hide sensitive notification content (which you probably should... otherwise 2-factor authentication is extremely pointless if your device were lost or stolen), you still won't be able to see the notification content itself, just that there is a pending notification for that particular app.
I hope you're finding the mod useful, for anyone who is using it. Please let me know if you find any issues with the module, thanks. I'm by no means a developer, but I have more free time than usual for obvious global reasons and it's a fun learning experience while the free time lasts. =)
I've been using the original NoQSInLockScreen, and while it did the job, it really bothered me that you couldn't use media controls on the lock screen (or expand notifications).
This mod took care of that problem. Really happy with it!
Just wanted to say thank you for putting it up!
Tested it on Android 9 (LineageOS 16.0).
Just wanted to stop in and say thank you for the awesome edxposed mod! I appreciate the extra security and hope you're doing well!
Sent from my Pixel 4 XL using XDA Labs
bradical711 said:
Just wanted to stop in and say thank you for the awesome edxposed mod! I appreciate the extra security and hope you're doing well!
Sent from my Pixel 4 XL using XDA Labs
Click to expand...
Click to collapse
Just wanted to let you know, as a fellow (now former) user of this mod, that I found a better way of doing this! So just thought I'd share:
Using GravityBox app for EdXposed framework you can simply define which individual QS tiles you want to secure. That way you still have access to the QuickSettings pulldown menu from the lockscreen (unlike this mod which disables it altogether), but things like Wi-Fi, Location, Airplane Mode etc. are secure and not accessible until you've unlocked your phone. It's a much more practical and elegant solution in my opinion.
Check out my post on this from Reddit where I describe the steps if you're interested:
https://www.reddit.com/r/LineageOS/comments/gdvwml/securing_quick_settings_tiles_on_lock_screen/
Can't wait to try, does your mod support Android 11?
(edit)
09 June 21 update.. and the mod is still woring
Suavie103 said:
(edit)
09 June 21 update.. and the mod is still woring
Click to expand...
Click to collapse
I completely forgot about this mod, haha. But thanks for letting us know!
As @nanquan mentioned (a long time ago, lol), you can also achieve (essentially) the same thing by using GravityBox. It is indeed a more "elegant" solution, and since I already use GravityBox heavily, I now just use GB's tweaks to lock down the main comm tiles.
But I'm glad this still works, for those who still prefer to use it for whatever reason. I can see it still being useful if you have a lot of custom QS tiles and want to keep it all locked down.
Confirmed working A11 xtended rom, 1+7t
Not working in 2022 Android 10 (Q)
Successfully working on Android 12 using Lsposed-Zygisk magisk 24.3
williamsbertoldo said:
Not working in 2022 Android 10 (Q)
Click to expand...
Click to collapse
It still works bro.
any chance this would work on a Pixel 6 Pro?
Hello,very usefull mod.Any chance to re-continue it?I use los 19.1 and keeping quick tiles unlocked is extremely unsafe these days..
Do not work with zygisk and lsposed.
Any fork for this?
lupastro82 said:
Do not work with zygisk and lsposed.
Any fork for this?
Click to expand...
Click to collapse
As well as enabling the module you need to tick the checkbox for 'system framework' and 'system ui'.
porkpiehat said:
As well as enabling the module you need to tick the checkbox for 'system framework' and 'system ui'.
Click to expand...
Click to collapse
Can't find System Ui to check it.
kos25k said:
Can't find System Ui to check it.
Click to expand...
Click to collapse
Make sure you uncheck system apps in the corner here.
Curiousn00b said:
Make sure you uncheck system apps in the corner here.
Click to expand...
Click to collapse
omg really thank you dude it worked on my pocox3 pro running los 19.1 been searching this solution years now
Btw,did u find something similar for power button also?
Hello,
this is a great feature and I would like to install on my pixel 7 android 13.
Anyone tried yet?
Related
I am starting this thread anticipating the release of LP to our device. As we all know with the new 5.x.x release there are some bugs and new ways we have to mod things, most especially Xposed and the modules we use for our G3. I want this to be a place where you can ask questions, post information, and assist with anything TMo LP related.
Please no arguing and no conspiracy theories. I hope that with everyone playing nice and helping others, this can serve as a central hub of knowledge for our device running stock LP
@autoprime has already released a flashable unofficial system and boot image here..
http://forum.xda-developers.com/tmobile-lg-g3/development/stock-lg-d851-20b-t3062164
Please read it thoroughly!!
There is also a new root method, as many know, for Lg devices that is now available in a oneclick method. For those that don't want to flash the official rom through twrp when both become available this is for you,,
http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
Remember this is mainly an information thread so please read as much as possible before asking a new question. If you don't have a somewhat helpful answer please don't reply. If you don't have a somewhat logical question please don't ask. We are here to help eachother
Don't know about the G3 although it should be fine, but Viper4android is working on LP. I installed it on my step son's N4..
What's Working/Not Working on G3 Tweakbox 1.4beta2
mikemikemikexxx said:
I am only making this post to help others and the developer with things I have found, not to criticize. Issues observed so far with in Lollipop with latest version.
Keep up the great work. Let me know if you need help testing. I don't mind pre-alpha or the risk of boot-looping in the name of improving your awesome App.
Overall works great but a few bugs.
What doesn't work / not work correctly--- indicated what isn't
Every change needs a reboot
Any change breaks custom Navbar/SoftKeys (until rebooted)
Quick Settings Panel color impossible to match to the color above it (the colored bar with the settings, clear and clock in it, not the status bar)
Advanced Power Menu shows up but missing reboot options despite 4 way setting being enabled. Screenshot option doesn't do anything.
Remove Knock Code String
Hide Carrier Text (Unlock Screen)
Bigger Call Picture
AOSP Clear All Button
Restore the Menu Button, it does restore the menu button but it doesn't change the icon in the stock settings anymore, still shows as Q-Slide or something like that
Ability to disable quick circle (that thing when you hold the home key)
Click to expand...
Click to collapse
Am I the only one that doesn't have a profile icon in the status bar? If I'm not how am I supposed to enable it?
I'm not seeing it Swizzle, looks like maybe LG pulled it.
Sent from my LG-D851 using Tapatalk
---------- Post added at 07:50 AM ---------- Previous post was at 07:49 AM ----------
This L radio has been.... Interesting. My signal in the boondocks is better, but I'm having a much harder time getting Lte in places I've had no issue before. Wifi seems weaker too.
Sent from my LG-D851 using Tapatalk
dakpluto said:
I'm not seeing it Swizzle, looks like maybe LG pulled it.
Sent from my LG-D851 using Tapatalk
---------- Post added at 07:50 AM ---------- Previous post was at 07:49 AM ----------
This L radio has been.... Interesting. My signal in the boondocks is better, but I'm having a much harder time getting Lte in places I've had no issue before. Wifi seems weaker too.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
Yeah I think the only way to switch profiles is still through guest mode(not like other LP devices) so nothing there has changed.. I'm doing fine with data and wifi, issue I have is starting this morning I couldn't turn BT on from the statusbar toggle until I rebooted. I clean installed and started everything over too.
Plus so far battery seems a little worse..which has been reported across the board on G3's running stock LP
How To Get Viper4Android Working On 5.0.1 D851 (My Experience)
As the title states this is how you can get Viper4Android soundmod working.
·Download and install the Viper apk for 4.4/5.x you can choose version 2.3.3 or 2.3.4(I have a modded version called Lolliviper) (Not my work, you can google it).
·Download and install SELinux mode changer from the Playstore.
·Open Developer options under system settings and uncheck "Use NuPlayer".
·Open SELinux mode changer app and change to permissive.
·Open Viper and install your prefered driver (I use Superior quality).
·Reboot
·Upon reboot make sure SELinux is still set to permissive.
·Open Viper and enable.
·Open your music app and select a song.
·Open Viper select menu and the driver status. You should have all YES.
I have tested this on Google Music and the stock player. There are a lot of guides out there for this. Most suggest flashing libs and build prop tweaks. None of that was necessary for me. This is the exact way I set it up.
Download Links-
Viper4Android:
http://vipersaudio.com/swupdate/viper4android/download.html
SELinux mode changer:
https://play.google.com/store/apps/details?id=com.mrbimc.selinux
My Lg Sound Bar is bumping as I type this!
Ugh, how do you use that system font?
Sent from my LG-D851 using Tapatalk
dakpluto said:
Ugh, how do you use that system font?
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
It's "Veggie Burger" from ifont.
Swizzle82 said:
It's "Veggie Burger" from ifont.
Click to expand...
Click to collapse
I meant how do you survive with it, lol. It's a little too close to comic sans for me. I do wish the stock rom had better font choices.
dakpluto said:
I meant how do you survive with it, lol. It's a little too close to comic sans for me. I do wish the stock rom had better font choices.
Click to expand...
Click to collapse
Idk I like it.. It is still legible, not cartoony, and not too bland. I don't like any of the stock fonts. I haven't found a font that I like yet that covers every area of font.
. If you hate the lollipop nav bar icons like me, I found a way to get the home, recent, and back buttons back. You can use kickoffs nav bar theme. I wouldn't recommend installing anything else from his thread... Trust me.
http://forum.xda-developers.com/lg-g3/themes-apps/theme-lollipop-lollipop-theme-t2944558
Working on D850 5.0.1 :good:
Hello there.
This is a magisk module that will enable Always on Display. This is confirmed to work on Android Pie on the Google Pixel (XL), however it will probably work for most devices.
The way this works is explained here. As you can see, it's super simple!
This also requires Magisk 17.0+.
DOWNLOAD
To use it, simply flash it in Magisk Manager, then reboot. AOD will then automatically be enabled, and you can toggle it on or off in Display settings.
Happy Always on Displaying! :laugh:
Glad to finally see this feature, but I do have one concern. I noticed that it does not turn off when the light sensor is covered, could this cause screen burn in?
Sumaech said:
Glad to finally see this feature, but I do have one concern. I noticed that it does not turn off when the light sensor is covered, could this cause screen burn in?
Click to expand...
Click to collapse
I believe the sensor needs to be covered for 10 seconds for it to turn off, if I remember correctly. No, this won't cause burn in, if you record th screen and speed it up, you'll see that the clock moves very slowly
shagbag913 said:
I believe the sensor needs to be covered for 10 seconds for it to turn off, if I remember correctly. No, this won't cause burn in, if you record th screen and speed it up, you'll see that the clock moves very slowly
Click to expand...
Click to collapse
Thanks, after playing with it for a while I just discover that it takes 10 seconds. Again, thanks for the feature.
Does this bork the sRGB color calibration when turned on? I was the one who created the magisk module in the other thread and it somehow broke my sRGB option.
legendarren said:
Does this bork the sRGB color calibration when turned on? I was the one who created the magisk module in the other thread and it somehow broke my sRGB option.
Click to expand...
Click to collapse
It shouldn't bork it. Didn't even know someone else made a magisk module lol, can you link it?
EDIT: nvm, I found it. Yeah srgb should work with this one.
See attached. The files here are from the Pixel 3 (Non-XL) which someone on Telegram told me, is almost the same as in the Pixel 2 XL. Do note that I didn't just include the framework-res__auto_generated_rro APK but the whole /system/vendor/overlay folder. Because I think it includes some other animations like the one when using the Pixel 3 Live Wallpapers.
I would also want to know if by using your module, will AoD be able to follow the ambient sensor? Because mine seems like it always is in full brightness even when I try to cover the sensor.
shagbag913 said:
It shouldn't bork it. Didn't even know someone else made a magisk module lol, can you link it?
EDIT: nvm, I found it. Yeah srgb should work with this one.
Click to expand...
Click to collapse
Okay, I'll try this one out again. Can you check my inquiry above?
legendarren said:
See attached. The files here are from the Pixel 3 (Non-XL) which someone on Telegram told me, is almost the same as in the Pixel 2 XL. Do note that I didn't just include the framework-res__auto_generated_rro APK but the whole /system/vendor/overlay folder. Because I think it includes some other animations like the one when using the Pixel 3 Live Wallpapers.
I would also want to know if by using your module, will AoD be able to follow the ambient sensor? Because mine seems like it always is in full brightness even when I try to cover the sensor.
Click to expand...
Click to collapse
All mine does is enable the string that enables AOD. Yours does a LOT of other stuff, which could be bad (not 100% sure, I haven't look through your overlay very closely.). The only thing that needs to be set to true is config_dozeAlwaysOnDisplayAvailable, after setting that everything else is handled (the ambient sensor will turn off the display after 10 seconds, pixel 3 wallpapers work, etc)
shagbag913 said:
All mine does is enable the string that enables AOD. Yours does a LOT of other stuff, which could be bad (not 100% sure, I haven't look through your overlay very closely.). The only thing that needs to be set to true is config_dozeAlwaysOnDisplayAvailable, after setting that everything else is handled (the ambient sensor will turn off the display after 10 seconds, pixel 3 wallpapers work, etc)
Click to expand...
Click to collapse
Oh I see, so this does not include overriding the overlay of the system? Hmmm. So it's much like just flipping a switch then?
legendarren said:
Oh I see, so this does not include overriding the overlay of the system? Hmmm. So it's much like just flipping a switch then?
Click to expand...
Click to collapse
This does override the overlay of the system. I would recommend decompiling it and taking a look for yourself, because I suck at explaining things lol.
BTW: I took a further look at your magisk module, and it sets some stuff that is very much not good. Take a look in res/xml/power_profile.xml after decompiling the overlay, it is setting cpu related stuff that should only be set on the Pixel 3
shagbag913 said:
This does override the overlay of the system. I would recommend decompiling it and taking a look for yourself, because I suck at explaining things lol.
BTW: I took a further look at your magisk module, and it sets some stuff that is very much not good. Take a look in res/xml/power_profile.xml after decompiling the overlay, it is setting cpu related stuff that should only be set on the Pixel 3
Click to expand...
Click to collapse
Ah I see. Like I said, I just tried to port the whole overlay folder to my OG XL. Good to hear your input.
Working fine for me. Pixel, october stock. Thanks sir
Sent from my Pixel using XDA Labs
It is possible to add the alarm time on lockscreen?
Nice module. Working perfectly for me
Link in OP updated, I lowered the overlay priority so it doesn't break other overlays (ahem lawnstep)
I've been running (Sai's Always On Enabler)[https://play.google.com/store/apps/details?id=baka.sai.pixelEnabler] substratum overlay for several months now and it has been working great. How is this Magisk module different?
I also use Tasker to enable Always On Display only when plugged in, which I highly recommend!
hackel said:
I've been running (Sai's Always On Enabler)[https://play.google.com/store/apps/details?id=baka.sai.pixelEnabler] substratum overlay for several months now and it has been working great. How is this Magisk module different?
I also use Tasker to enable Always On Display only when plugged in, which I highly recommend!
Click to expand...
Click to collapse
Last time I tried it (a couple of months ago), it was kind of buggy (had to double tap the power button to turn on, the screen turned grey sometimes, etc), did they fix those issues? I just figured it was still buggy so I made this lol
It's not working for me , plz guide me how to enable it , (clear path)
Harsha Vardhan Ganiya said:
It's not working for me , plz guide me how to enable it , (clear path)
Click to expand...
Click to collapse
Hi. Ensure you are on Android 9 (Pie) AND Magisk 17.0+ - as per the OP.
Download the ZIP file onto your phone (either download directly on phone or drag n drop from PC)
Open Magisk and go to "Modules"
Click on the + icon
Find your ZIP file and open it
Wait for it to install then click "Reboot"
Go to Settings > Display > Advanced > Ambient Display. Turn on "Always on Display" if you need to
Done!
SkinlessMage006 said:
Hi. Ensure you are on Android 9 (Pie) AND Magisk 17.0+ - as per the OP.
Download the ZIP file onto your phone (either download directly on phone or drag n drop from PC)
Open Magisk and go to "Modules"
Click on the + icon
Find your ZIP file and open it
Wait for it to install then click "Reboot"
Go to Settings > Display > Advanced > Ambient Display. Turn on "Always on Display" if you need to
Done!
Click to expand...
Click to collapse
Did bro but there is no such options , only lift to check is there but it's there from earlier, plz help
Just got the update from Verizon. what are the biggest changes to the latest Android version?
Sent from my SM-N976V using Tapatalk
...for me randomised MAC address, better control Location permissions, Scoped storage but I'm not 100% sure if is enabled in Android 10, more polished OneUI... so far I like A10, don't like only new battery stats
Sent from my SM-N975F using XDA Labs
https://www.rprna.com/updates/one-u...10-for-the-galaxy-note-10-complete-changelog/
rmn.br said:
...for me randomised MAC address, better control Location permissions, Scoped storage but I'm not 100% sure if is enabled in Android 10, more polished OneUI... so far I like A10, don't like only new battery stats
Click to expand...
Click to collapse
Curious, are you not a fan of the gesture navigation?
pcriz said:
https://www.rprna.com/updates/one-u...10-for-the-galaxy-note-10-complete-changelog/
Click to expand...
Click to collapse
fails to mention the up in pro mode iso to 3200 in the cam and 30 sec shutter vs 10 on android 9
Nice to know the camera got those cam speed and iso aditions, I am curious about the starage handling, as I previously read an article here in XDA that files created by any app would be available only for such app, the author saw this as a negative feature, I would like to see how that impacts overall file usage in real life now that android 10 is officially rolling out
The article does not mention what they crippled ...
Spo0f said:
The article does not mention what they crippled ...
Click to expand...
Click to collapse
There is nothing stopping you from summing it up for the audience.
Spo0f said:
The article does not mention what they crippled ...
Click to expand...
Click to collapse
I've seen you say this in two threads now. You should really tell people. What's this stuff they crippled?
Spo0f said:
The article does not mention what they crippled ...
Click to expand...
Click to collapse
Inquiring minds want to know. lol
External touchpads support is broken (both usb and bluetooth) - they don't work/gets recognized as mouse HID as it was on Android 9, currently more like some kind of touch input. Therefore mouse cursor acts strangely when using touchpads - it is way quicker in one plane (e.g. horizontal) than the other (e.g. vertical) which makes it usless.
The update does cripple support for Good Lock which is a huge drawback. You can no longer customize how many rows or columns appear in the quick settings. Many Pie themes are no longer working in 10. On the positive side, battery life has much improved with about 20% more battery at the end of the day. Certain apps such as Instagram will now switch to dark mode if you have it enabled systemwide. For those eagerly waiting, I'd say you're not missing out on much.
Guyinlaca said:
The update does cripple support for Good Lock which is a huge drawback. You can no longer customize how many rows or columns appear in the quick settings. Many Pie themes are no longer working in 10. On the positive side, battery life has much improved with about 20% more battery at the end of the day. Certain apps such as Instagram will now switch to dark mode if you have it enabled systemwide. For those eagerly waiting, I'd say you're not missing out on much.
Click to expand...
Click to collapse
Every new version of Android on samsung starts without full support of every goodlock app. It will be the same thing for Android 11. They will update then eventually
One thing for me that kills the A10 update is being unable to Turn Off "Restrict Backgroud Data" on Power Saving Mode
I like to throttle the phone to stop losing battery as quick - Reduce Processor to 70% / AOD Off etc...
With the latest update they have removed the option to do this however when you activate it - It says be default that it is going to be switched on :/
Anybody faced the issue of KLWP not fully working after the update? I can set the wallpaper but the "click to launch app" does not work.
Sent from my SM-N975F using XDA-Developers Legacy app
pcriz said:
https://www.rprna.com/updates/one-u...10-for-the-galaxy-note-10-complete-changelog/
Click to expand...
Click to collapse
Thanks for this, I examined it.... My favorite was not described either, it is the "Smart Pop-Up View" - bubblehead type notifications for ANY APPS on your phone which when selected brings up said app in a tiny separate window!
KruseLudsMobile said:
Thanks for this, I examined it.... My favorite was not described either, it is the "Smart Pop-Up View" - bubblehead type notifications for ANY APPS on your phone which when selected brings up said app in a tiny separate window!
Click to expand...
Click to collapse
That didn't come with Android 10 though. It's been there. Maybe it came to other devices on 10 but Samsung already had that feature.
pcriz said:
That didn't come with Android 10 though. It's been there. Maybe it came to other devices on 10 but Samsung already had that feature.
Click to expand...
Click to collapse
HOLY Crap! You are absolutely correct! OMFG! Wish I had found that long ago!
I hate it when programmers change things just so it looks new and improved.
Zero-dark-thirty is NOT the time I want to discover that the snooze button on the alarm clock app has been "upgraded" and moved. Groggy/grumpy/sleepy self turned the alarm off this morning instead of just snoozing it.
Why do they keep effing with my snooze button?!?
/rant
OnePlus Lift To Wake
TL, DR. Where is the download?
github.com/xubowenhaoren/OPLiftToWake/releases
What does it do?
This is a simple app to enable Lift To Wake for OnePlus 7 series.
It is not the Lift To "Ambient Display" in the stock Settings App; it enables the true Lift To "Lock Screen" like other phones.
Why do I want this feature?
You've probably already known that OnePlus, in Android 10, reveals the notification content on the lock screen after Face Unlock.
But to see those notifications, you either need to:
1. Pick up the phone and unlock with your finger at the Ambient Display. A two-step process.
2. Pick up the phone and press the power button. Again, a two-step process.
Now with the app, you can pick up the phone and the lock screen immediately shows up.
How does it do this?
It listens to the native system sensor (`oneplus.sensor.pickup`). In my testing, it is very power efficient.
What phones does it support?
I have tested this on a OnePlus 7T with Android 10. It should also work with other OnePlus 7 series.
Note that for earlier OnePlus phones, there is also a [pickup sensor] but with a different name.
If you want this app to work with earlier OnePlus phones, you should try replacing this line in `Utils.java` with the correct sensor name:
```
mSensor = Utils.getSensor(context, mSensorManager, "oneplus.sensor.pickup");
```
How do I use it?
You probably want to turn off the Ambient Display first.
After installing the app, turn on the "Lift To Wake" toggle.
You should also consider turning off the battery optimization of the app for a more consistent background performance.
Do I need Magisk for this?
No, it is root-free.
Credits
Much of the code is from the Lineage OS team.
Other code references can be found in the code comments.
This is brilliant!! Appears to be working great... Will provide an update on power efficiency in a while
How do I install
Works great on OP7 pro ?.
Jdhal21 said:
How do I install
Click to expand...
Click to collapse
github.com/xubowenhaoren/OPLiftToWake/releases
Works so well with face unlock auto unlock and PIXEL AOD mod.
is there any way to make the screen lit up time response a bit faster ?
umair shaikh said:
Works so well with face unlock auto unlock and PIXEL AOD mod.
is there any way to make the screen lit up time response a bit faster ?
Click to expand...
Click to collapse
I am afraid no. That's determined by the system sensor.
bwx074 said:
I am afraid no. That's determined by the system sensor.
Click to expand...
Click to collapse
Ahh. Good work tho
This works great. Any way to get it to run automatically after a reboot? I have to enable after every reboot.
Thanks, again!
GeneFitz23 said:
This works great. Any way to get it to run automatically after a reboot? I have to enable after every reboot.
Thanks, again!
Click to expand...
Click to collapse
I've made efforts to enable this service after reboot. It wasn't successful, however. Oxygen OS has a strict whitelist of apps that may start automatically after a reboot. One way to work around this is to use Accessibility Service, but that could cause more battery drain. Lol, I think it's better to leave things this way.
Very useful app, this was my most demanding functionality after bought OP7T
Thank You For this
Can u add to the store please?
Nice app. Thnks
It works great for op7t, but doesn't work for Op7.
On op7, the screen lights up, but faceunlock is not available.
You need to click on faceicon first to work (screens in atach).
But, if you unlock op7 via the power button (second screen in atach) - faceunlcok works great!
Is there any solutions for op7?
Works as it should! But screen wakes a lot while inside the pocket.
Very useful mod, thx for that
Only issue that it doesn't work anymore after some hours,i need to start the app again to get it working again for a few hours. I already have disabled battery optimisation. Any ideas to fix this?
Regards ysco..
Hello, how can i make it work on Oneplus 8?
This app is great, something I've been looking for a while. But, it doesn't work consistently. It stops after a few hours after I enable it. Then I have to open the app and then it will 'realize' the switch is still on and start working again. Is there a solution for this?
Thanks bud!! It works like a charm!!
Looks really helpful.
Works good also.
Thanks.
Tapatalk via OnePlus 7T
Hello,
would you please tell me if there's any app that can edit the horizon light animation and/or add a loop, so the animation continues till the notification has been read or cleared?
Thanks in advance
Would be a nice feature to have since the notification LED is gone
On Color OS 12 Stable works fine & is awesome.
I really wish we had Renovate ICE for OP9P. I used that to customize the horizon light on my previous phone.
terlynn4 said:
I really wish we had Renovate ICE for OP9P. I used that to customize the horizon light on my previous phone.
Click to expand...
Click to collapse
I 1000% feel the same way. I find myself wanting to go back to my 7pro just to have RICE again. It was so easy to install/use and had every customization option I wanted. I just got my 9pro within the past month and at least once a day I debate returning it and using my 7Pro still just for Renovate.
:I can't decide if I should try a custom ROM like evolution or try to hold out for a rom to flash in Magisk similar to how RICE was. Not sure how many of those will exist anymore considering Magisk is slowly going away
terlynn4 said:
I really wish we had Renovate ICE for OP9P. I used that to customize the horizon light on my previous phone.
Click to expand...
Click to collapse
If mwilky and the rest of the Dev team managed to get a OP10, would you upgrade to the 10?
[email protected] said:
If mwilky and the rest of the Dev team managed to get a OP10, would you upgrade to the 10?
Click to expand...
Click to collapse
If the hardware turns out to be a better upgrade than the 9 series was and it receives a generally positive response from the dev community, I'll probably upgrade. RICE would definitely be a bonus, but overall this phone just hasn't lived up to my expectations.
dentero said:
Hello,
would you please tell me if there's any app that can edit the horizon light animation and/or add a loop, so the animation continues till the notification has been read or cleared?
Thanks in advance
Click to expand...
Click to collapse
I didn't realize how much I depended on notification light until it was gone. The ambient display serves my needs as a replacement.
C
seelions said:
I didn't realize how much I depended on notification light until it was gone. The ambient display serves my needs as a replacement.
Click to expand...
Click to collapse
Can you tell me what app you use for configuration
dentero said:
C
Can you tell me what app you use for configuration
Click to expand...
Click to collapse
Yeah, it's natively available in Oxygen OS. See Settings > Display > Ambient Display. I set it to show during my daily active hours.
Other places that affect this include:
notification detail settings and customization (to change the clock style & other visual elements).
Enjoy!
dentero said:
C
Can you tell me what app you use for configuration
Click to expand...
Click to collapse
Im not entirely sure how well this works, but I have messed around with this app previous. I used an app on the playstore called AOA by newGen Mobile, its not quite an ambient display but it is an Always on Display app that enables you to customize your horizon lights as you see fit(color, duration, pattern and such). There is a free version of it if you want to at least try it out.