Help
Does anyone know how to solve the "phantom" transfer of energy
Since since yesterday in mine
The icons appear to me as if I were charging another device with the m
Related
Hello
For last few weeks I experience very odd problem witch my clock and date in my Xda Orbit. Each time I change the battery (I use two batteries interchangeably) the clock and date reset to the factory defaults 12:00, 24 October 2006. However all other settings remain unchanged, I mean alarm, appointments etc.
I tried to perform hard reset but with no success.
I'm just wondering if there is any other battery which keeps clock and date alive.
Please if anyone have an idea or suggestion how to sort it out I would really appreciate.
Tahnks
RAfal
I just noticed that there is a post regarding the same problem. Sorry
Hi,
I don't have a solution for you. But I can recommend this tool:
SP Time Sync
http://www.spdialer.com/download/sptimesync23ce5_arm.zip
Have fun
Are you ever charging the battery whilst it is in the device? Or only separately in a battery only charger?
There is an internal battery, you can see it in the pictures in the Artemis Inside pdf file.
I have a feeling that battery is for the GPS unit's NVRAM to store almanac data and is not accessable to the rest of the device.
I think you will find this true in all artemis devices, could someone else try?
I have a feeling that the timekeeping is all in software and so when power is lost so is the time/date...
The device has flash-ram, why would you need a battery to keep the Almanac data?
I just took my battery off for 20 minutes and the clock was fine.
Sorry if I was wrong... I just assumed it would be nvram for the gps unit...
No need to say sorry chap, it is not a contest to say who is right or wrong or anything! I could be wrong, I really can not be sure.
Perhaps the OP should try charging his phone today to see!
Well I've also took the battery out and left it about 15 mins and it is 7 mins out of date...
If I leave it for an hour i think it will revert back to the factory date...
Orbit battery problem
One of my friend had the same clock resetting problem with his Orbit , he changed the internal battery to new one, it is working fine now.
Please try after changing the internal battery, it may solve the problem to you as well.
Does anyone know what type it is? A non-rechargeable button cell type thing?
mine does this aswell. it's annoying but it's easy to change back. if the battery is a non rechargable cell and if it can be changed for a chargeable one will the phone charge it?
Hi there all,
Seems that this post got some responses!
I posted up a few weeks ago about this issue (no responses though!) and then a few days later another poster did the same!
Now this post was put up and it seems as though it's 'common' but not widespread. Sounds asa though it is the internal battery thats causing the issue. I didn't know there was actually one inside but hey..!
Just off to a meeting now - will check back later and on subsequent days to this thread if theres any more things to try or fix etc...
cheers!
Dennis! West London UK!
I have bought BA and im very happy with it.... but i dont have any cable for it and i wanna flash from wm03se (original system) to wm05 can i do that with bluetooth? I live in serbia and a cable for him is very expensive... anyone help please???
I have another question, when press down on buttons below those four buttons on front of the phone i need a little harder to press, same to answer button, can i clean it somehow.... THANKS
I seriously doubt it, as flashing requires rewriting the internal memory, that AFAIL can only be done when the device is in bootloader.
Is there any other way to flash phone? And please help me about buttons??
You can flash through the memory card if you can't do it via sync cable.
Can anyone show how to flash through memory card step by step? or drop some link here?? THANKs
As a start, I'd try the wiki. http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
i have read all about flashing but have not found how to flash with memory card... please help... thanks
I dont want to be annoying but HELP!!!! please
If you can't find anything on SD Card flashing, it may not be possible with your device.
I was hoping this was possible as well.
The BA I just got from Ebay stopped working while connected to the cradle or sync cable. When I first plugged it in to my sync cable I noticed it was kind of wobbly, and instead of showing the amber charging light it showed the red light. Putting it in the cradle it wouldn't do anything either until I left it on for a few hours then tried to do a hard reset.
After that it still wouldn't work on the sync cable, but did work on the cradle. So I flashed it from the original ROM to one of Xplodes to see if that would help. Well it works fine and I was able to upgrade on the cradle, but it still wouldn't work on just the sync cable.
Just yesterday when I tried to plug it into the sync cable again to see if it at least would charge while on it, I noticed that when it was on and I plugged it in the screen dimmed with a bunch of lines eating away at the screen. Finding that odd I unplugged the sync cable, rebooted it (worked fine) and put it back on the cradle. The moment it came in contact with the connection it again dimmed and got the wierd garbled screen, eventually going black and showing the red light instead of the amber light.
I also just noticed that the phone doesn't work. I was so worried about setting the thing up that I didn't even check that basic functionality!
So, here I have a BA that doesn't have a working phone, and can't be synced. The wi-fi seemed to work at least.
So is there any way to change the ROM back to OEM using the SD card, bluetooth, IRDA, or wi-fi? At least then I can try and send the thing back to the Ebayer I got it from. If I send it back now they'd see I have WM 6.1 on it and probably tell me I'm SOL.
Hello everyone, I have a Sony Xperia that's not co-operating with me anymore after I tried to flash it and maybe someone could give me a hint to what I can do so I can use this guy again as I miss it.
Right now it's in a state where I don't have any power lights, vibrating, absolutely nothing. The battery does have a full charge and I've tested it by swapping the battery out so I know it's good. I noticed a huge problem when the computer came up as a "QHUSUB" device in my device manager which I thought was quite odd. So I just rolled with it and got the drivers in hopes that would fix it but that was a no go. When I'm holding down to flash, it's not even recognizing the device. Went and tried just about every little trick in the book I could think of but nope, I'm just failing. If anyone has any hints, tips or tricks would be appreciated!
Thanks alot everyone.
-Wolf
Hello XDA Peeps,
I have the T-Mobile Samsung Galaxy S4 with CM 12.1 installed and I'm having a problem with the background picture randomly changing back to the default stock background on the Home and Lock screens. Now I say randomly loosely as I've noticed that it happens after it been charging via USB connection but it doesn't do it every time I unplug it. This will happen on both a normal wall charger or if I'm using my computer to charge the phone. It's almost as if when I plug it into charge it's somehow disconnecting the memory that the picture I want as my background is stored on, I've verified that the picture is on internal memory and not the SD Card.
Anyone else having this problem, any ideas for a possible fix?
Thanks in advance!
This has been driving me insane. I upgraded from a G6 yesterday.
When I connect the G8 to my PC the Android System notification "Tap to change USB options" does not come up in the notification shade, so of course it stays in the default "charging only" mode and the PC can't recognize it.
It's not the USB cable. I tried several and they all work with other phones flawlessly. Also updated the LG universal driver on my PC (Win 10) just in case.
I have USB debugging enabled in the Developer Options and while there is also a "select USB configuration" option, it doesn't work!
The menu comes up for a split second and instantly disappears...
Does anyone else have this problem? So far I really like this phone, but no USB connectivity which means no USB tethering or adb or just even moving large media files around etc etc is just not something I can tolerate.
For anyone curious, after talking with LG the phone was returned. It was most likely a faulty charging port.
Already have a replacement phone and it doesn't have any of the above USB issues.
I have the exact same issue right now, after 2 years of use of the phone!
Have been trying for a day to find a solution and I couldn't...
2 weeks ago, the battery wouldn't charge fast... from the 'usual' 1.5 hour that it was taking, it now takes 4-5 hours... I thought it was the battery, so today I just received the new one and I was about to change it... I thought of making a backup first, which I did... I wanted to transfer it to my PC for safety but I just can't... it's not the cable (tried other phones), it's not my PC (tried it on another PC and my laptop)...
I now see this post... so I guess I have to be patient enough for another 2 weeks to order and receive a new Charging port...
I really don't want to change my phone... have been using LG for more than a decade now, and I really don't know what to buy next... all else are either way too expensive or just of way lower quality...
Thanks for the update dear Neera!
PS: battery takes too long to get charged, but its use life remains as is... so I didn't think that would be the problem, but couldn't figure out what else it could be...I will need a new one soon anyways, so it's good to have it and change it together with the new charging port...