[GUIDE][ROM] Realme 5 Pro global ROM for Realme Q - Realme 5 Pro Guides, News, & Discussion

[GUIDE][ROM] Realme 5 Pro global ROM for Realme Q - Realme 5 Pro Guides, News, & Discussion

Realme 5 Pro global ROM for Realme Q
Code:
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
{Mod edit}
If you know exactly what you're doing then jump go step 5)
1) Introduction:
Oh sheet. Here we go again. Hope you guys will make use of this little guide for at least 20 RMQ users PMed me here on xda, on Messenger and on Telegram to help them install RM5P ROM on their RMQ device and had to dump them for I had no idea. Now that I have tried it myself I'll try to do. I've an RMQ device 4+64GB variant which I ordered from AliExpress for 161$/148€ ( in September of 2019 ) and tried loads of tweakings on stock ROM to make it more fitting to a person like me for daily usage but I don't think I have to say... without much success. In this guide I'll try to show/tell you how to make with COS without weeks of testing and debugging I've been through on stock RMQ ROM since October of 2019.
2) Personal reasoning:
I heard there are people who like Color OS as it is existed but still I wouldn't want to believe you even after I talked with some of you. Since the very first day I held my device in my hands I started seriously despising Color OS for I've been a purist, minimalist and stock Android fan for 10 years now and always tried to stick to "clean" ROMs such as LOS, PE, Aosp Extended, AOSIP because of reasons. This is mainly because (Chinese) Android skins modify system/vendor so heavily that they prohibit or interfere (with) basic Android functions that work well on stock-like ROMs. {Mod edit}
3) Features:
Mostly same as on RMQ ROM but...
More languages are supported by the system.
Most of Oppo's restrictions are removed {Mod edit}
3.5) Known bugs:
None. You tell me!
4) Basic terms:
RMQ: Realme Q
RM5P: Realme 5 Pro
RMX1971CN: Realme Q device codename.
RMX1971EX: Realme 5 Pro device codename. Both are used to distinguish China and Global/India ROMs.
COS: Color OS
ROM: Read Only Memory (means for us the OS we use to flash with TWRP/Fastboot)
OS: Operating System
TWRP: TeamWin Recovery Project (the one recovery we use widespread to flash custom ROMs and fixes on our mobile device)
FASTBOOT: A mode of your device and a script on PC that you can use to flash stuff via USB cable onto your device. This is necessary if you are on stock recovery.
FLASHING: The process of writing onto our mobile device's ROM that wouldn't necessarily be possible without using external tools if TWRP wasn't there for us. Mobile device companies don't really support or encourage users to do this.
BOOTLOADER: Default state is locked on our and on most devices. Without unlocking it, it would be extremely hard if not impossible for us to flash custom ROMs on our mobile phones. You can unlock your bootloader by following this guide if you haven't already done that because without unlocking it, flashing global ROM on your device which comes with Chinese one preinstalled will likely be impossible at least not known to the RM5P/RMQ community so far.
MAGISK: Systemless solution which grants root access (admin-like) to the user without really tampering the ROM system, this way granting higher stability than it's predecessors.
5) Precautions:
If you aren't an advanced user and don't really know what you're doing follow the steps closely and it's highly advised to read the basic expressions to understand better what's happening just in case something goes wrong so you can fix it.
External SD card is highly recommended to use because to make this work formatting data is quite likely needed.
If you want to bring your data with you from your current ROM make sure to do either Titanium or Migrate backup and save it to your external SD card.
TWRP for RMQ (this one I highly recommend to use for it has a wide range of features and options that come in handy, unlike normal TWRP)
Magisk if you want root or/and want to pass Google's Safetynet completely.
Magisk COS beta FIX from here (step 6)
Modified vbmeta.img from here. (step 6)
Magisk modules: Busybox and MagiskHide Safety Props Config. (from inside Magisk Manager after successfully rooting with Magisk flashable zip file)
6) Prerequisites:
{Mod edit}
Probably formatting your data.
This means all your stuff, apps, data will be gone after you do this so be prepared and save your stuff to your external SD card.
7) Installing:
A) If you're coming from custom ROM then:
1) Wipe everything (except internal and external storage) including /data/system/dalvik/cache/ but not vendor and vendor shouldn't even appear in the list when wiping anyway.
2) Flash the ROM.zip
3) Flash TWRP.IMG as recovery and again flash it as boot.
4) Flash vbmeta.img as vbmeta.
5) Reboot even if you get notification "no OS is installed".
6) If you're stuck on boot logo for 15+ minutes or bootloop then turn off your device volume up+power then right after shutdown vibration and black screen enter fastboot mode by holding volume down+power, from there select recovery and you should be back to TWRP recovery
7) Select wipe and format data by typing "yes". This will delete all data on internal storage so take care.
8) Reboot to system
9) The device should boot up to COS. Do the initial setup and after that reboot to TWRP recovery again.
10) Flash Magisk.zip
11) Reboot to system
12) Enter Magisk Manager and disable core only mode
13) Reboot to TWRP recovery... again.
14) Flash Magisk COS Fix beta.zip
15) Reboot to system.
16) Check Magisk Manager. Core only mode should be turned off. Check SafetyNet Status. BasicIntegrity should be true now.
17) Download and install MagiskHide SafetyProps and Busybox from Magisk downloads.
18) Reboot to system (normal reboot)
19) Enter Magisk Manager and see if the two installed modules are active. (If yes you probably done everything well. If not, something is fishy.)
20) Download any terminal emulator app, I recommend Termux. Open it and by typing "su" without quotation marks and pressing enter you should grant root access to the terminal app you use. Now type: "props" and press enter.
Type 1) and press enter as edit device fingerprint.
Type f) and press enter as pick from certified fingerprint.
Type 6) and press enter as Google (you can use others too but I used this one so it should be tested).
Type 21) and press enter as Google Pixel 3a XL.
Type 1) and press enter as Android version 9.
Type y) and press enter as yes.
21) Reboot to system and open Magisk Manager. Check SafetyNet Status. Now both cts profile and basicintegrity should be true.
22) Enjoy your better Color OS.
B) If you're coming from stock rom:
If you haven't unlocked your device's bootloader it's time to do it.
After unlocking install TWRP for Realme Q. Then follow the steps above for they're the same.
Don't report issues. I can't help for I'm no developer and I've dyscalculia which means I should be bad at every Informatics stuff that requires math/logic thus I can't compile/rebuild/update ROMs. As for the developer he lost his phone so it's not his interest anymore to make fixes and updates for the ROM/device. Probably pointless to bug him.
Click to expand...
Click to collapse
ROM modified/made by: Birman34
ROM data/turorial written by: greenys'
ROM brought to you by: Realme 5 Pro/Realme Q global Telegram group
{Mod edit}
ROM information:
Security patch date: 2020.01.05.
Kernel version: 4.9.112
Build number: RMX1971EX_11.A.16
Android version: 9.0

It good way to flash global rom for realme Q. But your method is very completed. Thank you anyway!

bahuy2003 said:
It good way to flash global rom for realme Q. But your method is very completed. Thank you anyway!
Click to expand...
Click to collapse
Well, yes. I wish I had found a simpler method but I didn't and I wanted to make sure everything is going to work fine without letting issues happen during or after installation. Perhaps it seems complicated because of that and that I didn't want to take chances. Better be safe than sorry, I presume. For me, who has been flashing ROMs since 2010 it didn't take more than 5 minutes to complete all the steps. Evidently there are lots of users who just gotten into bootloader unlocking and don't know much about the details of flashing. That's why I tried to make this guide quite well detailed. Anyway, if I find a simpler way or I get know of an easier method or Realme itself will approve the change between regional ROMs I'll add those steps to my post of course. Don't thank me yet. Thank me if it worked btw!

Thank you for your tutorial, Excellent!
Should this convert Realme Q to Global version or just ported rom? Developers saying it's impossible for now because of different partitions sizes..
I have flashed the ported R5P rom in the Russian forum on my realme Q few weeks ago..
What about ota update in your method?, would it work and I can update regularly or not? I have to wait update fixes to fit the realme Q?
And can I lock the bootloader or mobile will getting bricked?
Many apps don't work because of root and unlocked bootloader..
Appreciating your effort ??

nagar.xda said:
Thank you for your tutorial, Excellent!
Should this convert Realme Q to Global version or just ported rom? Developers saying it's impossible for now because of different partitions sizes..
I have flashed the ported R5P rom in the Russian forum on my realme Q few weeks ago..
What about ota update in your method?, would it work and I can update regularly or not? I have to wait update fixes to fit the realme Q?
And can I lock the bootloader or mobile will getting bricked?
Many apps don't work because of root and unlocked bootloader..
Appreciating your effort ?
Click to expand...
Click to collapse
According to my knowledge official ROM change from global to China or vice versa is not possible. I don't know about OTA updates. I presume you can't update that way if you flash this ROM for as you said different partition sizes. This ROM while it's still made from global, several stuff from system were removed so it'd still fit onto an RMQ device's smaller partition. The ota updates are not modified this way so I think you couldn't update that way because the ota would be too big to fit onto the RMQ device's partition. I believe you shouldn't worry about root and bootloader unlock. Without rooting and using safetyprops Google notices your unlocked bootloader thus both cts and basicintegrity will fail. In my tutorial I go through that bothersome Magisk method to trick Google's security system. After doing that both SafetyNet checks pass, meaning Google shouldn't see your device as rooted. Root is dangerous for some apps because it can trick them. Unlocked bootloader is dangerous for the device and its owner. At least according to Google. Meaning with Magisk SafetyProps applied only DRM Widevine stuff shouldn't work completely like Netflix full HD and above. Every other app that requires certified device fingerprint should work. Banking apps and online purchases work just fine for me. I think you shouldn't worry, only if you're the type of guy who wants ota updates badly and watches DRM protected content all the time. Else this is completely safe ROM.

greenys' said:
...
Click to expand...
Click to collapse
THREAD CLOSED due to the distribution of warez.
XDA Forum Rules (excerpt).
...
6. Do not post or request warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit members to request, post, promote or describe ways in which warez, cracks, serial codes or other means of avoiding payment, can be obtained or used. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community.
...
Click to expand...
Click to collapse

Related

[ZE620KL/Android 9][TREBLE] COMPLETE GUIDE: Unlocking, Rooting & Flash GSI + Fixes

[ZE620KL/Android 9][TREBLE] COMPLETE GUIDE: Unlocking, Rooting & Flash GSI + Fixes
Unlocking bootloader to Flashing GSI (Asus Zenfone 5 [ZE620KL] / Android 9.0)
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About :
The last guide could leads to soft brick, as the instructions were not clear nor the files not supported for Android 9.0.
Here is a complete guide with TWRP 3.3.0 for Android 9.0, clear instructions and multiple fixes for GSI.
It has been tested on stock version v16.0615.1903.92.
Requirements :
- A stock version V16.0610.XXXX.XX or higher
- A phone on Android 9.0 (not 8.0!)
- A fully working USB cable
- Latest ADB / Fastboot drivers
- Bootloader unlocker (download latest from Asus website or from here)
- TWRP 3.3.0 image
- Android9EncryptionDisablerZE620KL.zip
- Magisk v19.3
Instructions :
Unlocking Bootloader
1. Backup all your important data.
2. Install the bootloader unlocker APK, and follow the steps. You will loss your warranty here, and it will factory reset your data
3. If there is any issue here, go into your stock recovery (volume down + power button) and factory reset.
Installing TWRP
4. Shutdown your device & boot in fastboot mode using volume up + power button.
5. Check that the connection between your device and your computer by typing this in your command line :
Code:
fastboot devices
6. Flash TWRP recovery using :
Code:
fastboot flash recovery <twrp_name>.img
7. Now reboot in recovery mode using :
Code:
fastboot oem reboot-recovery
8. In TWRP, select Wipe > Format Data > enter "yes" and confirm
9. Return to the main menu, select Reboot > Recovery
10. Do 8. & 9. and again
11. Using TWRP or ADB, install Android9EncryptionDisablerZE620KL.zip (on TWRP, go into Install > find Android9EncryptionDisablerZE620KL.zip > Install zip)
If everything has gone successfully, you now have a custom recovery.
As for some GSIs, a patched boot partition may cause bootloop, you should try installing Magisk after installing the GSI. If you want to keep your stock ROM, go directly to "Magisk Installation" section.Installing a GSI
This step may vary depending on the different GSIs distribution. I assume you install Havoc OS v2.7 GSI which actually works on this device.
1. Backup all your important data using TWRP backup.
2. Select the arm64-aonly GSI image you want, and move it on your external SD.
3. Wipe Data, Dalvik, and Cache.
4. Go back in the main menu of TWRP, and reboot to recovery.
5. Remove Magisk if it was previously installed, by using its uninstaller script.
6. Flash the GSI to system partition.
7. Boot and perform a factory reset.
Installing Magisk
1. Add the Magisk zip archive to your external storage.
2. Boot into TWRP recovery, and install the zip.
3. Enjoy!
Bug fixes:
Insufficient storage in the system partition to flash GApps : Download your OpenGApps archive on your external SD, and use MagicGApps 2018.9.23 to install GApps.
Auto-Brightness doesn't work: Download framework-res__auto_generated_rro.apk from here.
Using a root explorer or command-line, push the APK to /vendor/overlay.
Then run the following command in a rooted terminal or ADB shell:
Code:
chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay;chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay/framework-res__auto_generated_rro.apk
My camera doesn't work well (green tint on face camera) and/or the app doesn't boot: If Asus Camera doesn't launch on your GSI, you should probably edit your /system/build.prob file.
You need to edit ro.product.model, ro.product.brand, ro.product.name, ro.product.device, ro.product.manufacturer & ro.build.product properties to be:
Code:
ro.product.model=ASUS_X00QD
ro.product.brand=asus
ro.product.name=WW_Phone
ro.product.device=ASUS_X00QD
ro.product.manufacturer=asus
ro.build.product=ZE620KL
You can instead use Google Camera mod (port from Arnova8G2 & modded by 5Z community, thanks to them!), which works well (edit: there is a bug on HavocOS, we can't access settings).Bonus:
- You can reinstall DTS Headphone:X here.
- For booting your kernel in Permissive mode, check here
Sources:
TWRP 3.3.0 : On GitHub
If you need help or if you want to help on ZE620KL development go here:
https://t.me/Zenfone5Dev
(We will continue to update & help here though.)
Many thanks to all of the Zenfone 5 community (particularly Emincan, Pandolfi and Lmajkej),
Phhusson & Erfan for their works on GSI, and Shakalaca for its work on TWRP 3.3.0!

On HavocOS v2.8 GSI (13-08-2019):
It works:
- Almost anything
- Adaptive Brightness (after manual fix)
- Notch overlay
- DTS Headphone X (after manual installation)
- NFC
- Face unlock
- Stock camera (after manual fix)
- Magisk
- SDcard access
It doesn't works:
- VoLTE / VoWifi
- Google Camera settings
- External speaker amplifier (NXP amp)
- APT-X / APT-X HD bluetooth
- Low microphone in normal use
- No microphone in calls (only headphone microphone works)

GCam settings
But my google camera keep crashing when I want to go into camera settings

Hi thanks for this tutorial, this is my first time rooting my phone. I'm encountering a problem with my sd card after installing havoc os, everytime i try to move, save or any write functionality i do to my sd card, it always says the android version isn't compatible. I could still see my files from my sd, but everytime it asks permission it always say this

bentley0928 said:
But my google camera keep crashing when I want to go into camera settings
Click to expand...
Click to collapse
Same issue here. I will update the thread when I will find a more working GCam port (perhaps, this GCam port works well on ZenUI)
Jolo110 said:
Hi thanks for this tutorial, this is my first time rooting my phone. I'm encountering a problem with my sd card after installing havoc os, everytime i try to move, save or any write functionality i do to my sd card, it always says the android version isn't compatible. I could still see my files from my sd, but every time it asks permission it always say this
Click to expand...
Click to collapse
It's a known issue, the GSI maintainer @vince31fr is working on it. I don't have it, but I can advice you to use Solid File Manager, which works like a charm on my device.

"- No microphone in calls (only headphone microphone works)"
Funny... I'm on stock latest firmware and I have this issue, so I thought I try something new, and this has that issue. It can't be a coincidence. Something is ****ed up with this device.

Wonder if this will work for the Zenfone 5 Lite (or 5Q)? I wanna root my 5Q so bad haha

Thanks for the great instructions! Steps 1 through 11 worked perfectly for me, then I installed LineageOS (lineage-17.0-20191231-UNOFFICIAL-treble_arm64_avN.img) and it works properly. Then when I go back to TWRP and install Magisk v20.1 it reboots into an endless Lineage bootup logo animation (not boot loop). I can get an adb shell, but now also the external SD card has become invisible. Any suggestions?
UPDATE: I switched over to the patched Magisk version from PHH (https://forum.xda-developers.com/zenfone-5/general/ze620kl-add-support-to-evey-android-9-t3966918) and everything works perfectly now!

Hi!! I thanks for these instructions you gave. I know this post is a bit older. But is the only one I think could help me.
I got an ZE620KL and I'm trying to root this device. I have some experience in unlocking bootloader and rooting devices. But this one... Is giving me a lot of work. Researching in a lot of forums and websites I tried a lot of things with no success. In theory, is just install the official apk provided by ASUS and run the application. But the app doesn't work for a long time as I researched (error accusing network problem). I tried unlock via fastboot commands but I always got stucked by "remote: permission denied" even with latest drivers and ADB Fastboot installed. And yes... I let my device with no one security feature enabled and didn't worked. I tried everything even after wiped data / cache and factory reset and no progress.
In my researches, I realized something about 'oem unlock'. It appears to be the key to solve this. And I guess the tool to work with this is the damn unlock tool from ASUS which don't work! Also, I've heard about workaround with Magisk by flashing a custom recovery to achieve the root. Magisk no longer supports zip files to flash. Only '.img' and '.tar' files. I'd like to find some light here... I don't know what to do. I appreciate any help!

Hello do I need to flash Android9EncryptionDisablerZE620KL.zip if Im gonna flash a non-GSI custom ROM? Or its only for GSI Treble ROM?

[email protected] said:
Hi!! I thanks for these instructions you gave. I know this post is a bit older. But is the only one I think could help me.
I got an ZE620KL and I'm trying to root this device. I have some experience in unlocking bootloader and rooting devices. But this one... Is giving me a lot of work. Researching in a lot of forums and websites I tried a lot of things with no success. In theory, is just install the official apk provided by ASUS and run the application. But the app doesn't work for a long time as I researched (error accusing network problem). I tried unlock via fastboot commands but I always got stucked by "remote: permission denied" even with latest drivers and ADB Fastboot installed. And yes... I let my device with no one security feature enabled and didn't worked. I tried everything even after wiped data / cache and factory reset and no progress.
In my researches, I realized something about 'oem unlock'. It appears to be the key to solve this. And I guess the tool to work with this is the damn unlock tool from ASUS which don't work! Also, I've heard about workaround with Magisk by flashing a custom recovery to achieve the root. Magisk no longer supports zip files to flash. Only '.img' and '.tar' files. I'd like to find some light here... I don't know what to do. I appreciate any help!
Click to expand...
Click to collapse
Im not sure if you still have your phone or you have successfully unlocked bl. but I found an updated version of their tool which works.
*tried unlocking from android 10 not working, it says device model not supported*
Zenfone 5 Unlock BL

cf100clunk said:
Thanks for the great instructions! Steps 1 through 11 worked perfectly for me, then I installed LineageOS (lineage-17.0-20191231-UNOFFICIAL-treble_arm64_avN.img) and it works properly. Then when I go back to TWRP and install Magisk v20.1 it reboots into an endless Lineage bootup logo animation (not boot loop). I can get an adb shell, but now also the external SD card has become invisible. Any suggestions?
UPDATE: I switched over to the patched Magisk version from PHH (https://forum.xda-developers.com/zenfone-5/general/ze620kl-add-support-to-evey-android-9-t3966918) and everything works perfectly now!
Click to expand...
Click to collapse
Do you still have the patched Magisk zip file, the original link in the post seems not working

Realme X2 1993 development

I open this thread because in my opinion the development situation of the various versions of the device is very confusing. I seem to have understood that as regards the unlocking of the bootloader with a working fingerprint, the situation is evolving well only on the China and India version while on the European version nothing moves ... In my modest opinion, Realme deciding to treat those who buy its phones in Europe as users of its lower series devices compared to other areas of the world are wrong because little development leads to a few posts in the various forums and few voices in google searches that each of us does when deciding what to buy ... What do you think you realme device owners in Europe?

I have the 1993ex version and the FP is working fine after a16

hammerheading said:
I have the 1993ex version and the FP is working fine after a16
Click to expand...
Click to collapse
Thanks for the information ... What procedure did you use to unlock the bootloader?

I have EU version and what you said is true about Realme but development aspect, most procedures on China version works on EU version but may partially work on Indian version.
I've tweeted Realme EU over 7 times they haven't replied yet.
MY advice for EU and rest of the world is not to buy from Realme if you want active development and OEM response. Otherwise, you can be patient by using Realme OS until there is bigger development for your device

Bolumstar said:
I have EU version and what you said is true about Realme but development aspect, most procedures on China version works on EU version but may partially work on Indian version.
I've tweeted Realme EU over 7 times they haven't replied yet.
MY advice for EU and rest of the world is not to buy from Realme if you want active development and OEM response. Otherwise, you can be patient by using Realme OS until there is bigger development for your device
Click to expand...
Click to collapse
So you too like me, although there is news of the working fingerprint on the EU, believe that it is still not worth unlocking.
I ask it because I repeat following the various treadhs on the forum it gets confused. It is sometimes indicated that the finger epint works and that for example magisk can work in normal mode and not core only ... This would already be a lot, to say yes it could use the viper4android.

surferbyter said:
Thanks for the information ... What procedure did you use to unlock the bootloader?
Click to expand...
Click to collapse
I used this guide, it works the same for X2.

hammerheading said:
I used this guide, it works the same for X2.
Click to expand...
Click to collapse
Excellent, and as regards the installation of the twrp, which vbmeta file did you use?

surferbyter said:
Excellent, and as regards the installation of the twrp, which vbmeta file did you use?
Click to expand...
Click to collapse
First time i flashed the twrp i folowed this but now i simply skip the vbmeta and flash twrp directly from bootloader and it works fine.

Just installed havos os 2.9 gsi, so, it's not that bad rmx1993ex eu

woocashewski said:
Just installed havos os 2.9 gsi, so, it's not that bad rmx1993ex eu
Click to expand...
Click to collapse
never installed a gsi, if I'm not mistaken it takes the image of the vendor ... if you can give me a link to a guide to get started? Thanks in advance...

Howto thread is on this forum...

woocashewski said:
Howto thread is on this forum...
Click to expand...
Click to collapse
I'm doing something wrong because i get bootloop everytime. i tryed to follow the guide with different gsi but no luck. Can you give a quick step how you did it ?

Until the twrp installation everything works perfectly, when I install magisk whether I try to do it from zip recovery or from boot image patched the verification of the integrity of the verity boot sends me to bootloop. You would need the vbmeta, but when I try to flash the vbmeta.img the command:
fastboot flash --disable-verification vbmeta vbmeta.img
On the fastboot cmd he replies that - - disabled verification is unknown ...

surferbyter said:
Until the twrp installation everything works perfectly, when I install magisk whether I try to do it from zip recovery or from boot image patched the verification of the integrity of the verity boot sends me to bootloop. You would need the vbmeta, but when I try to flash the vbmeta.img the command:
fastboot flash --disable-verification vbmeta vbmeta.img
On the fastboot cmd he replies that - - disabled verification is unknown ...
Click to expand...
Click to collapse
I've been there, i think the problem was the adb. I used the Minimal adb and it worked, give it a try

first - check everything with adb prior to installing anything - get most recent version - i'll get v41, check if there is adb connection - by adb devices, if no - troubleshoot as in many threads here on xda until everything works.
at this moment i've got Havoc OS v 3.0 installed, unfortunetely with same limitations as 2.9 - no FP, no lux metering, and weird battery behaviour (sometimes cpu isn't clocked down when screen off - it can be tuned by eg. Kernel adiutor after rooting with magisk flashed from twrp.)
simplified guide:
- unlock bootloader
- flash twrp from fastboot
- select to start recovery on phone's fastboot menu (volume keys+confirm by power)
- enter your password to decrypt data
- flash vbmeta.img from PC by adb command
- at this stage I made a restart to twrp from twrp menu
- there's shouldn't be any prompt about data encryption
- made a cpmplete backup of the phone - backup to SD card, or to internal and at this stage copy entire backup folder to PC
- wipe: dalvik/cache/system/data
- install system img from a file GSI
- reboot to recovery
- install gapps, if error 70 --> goto wipe, advanced, resize system partition, back to install, install gapps
- reboot
if bootloops - format data partition

woocashewski said:
first - check everything with adb prior to installing anything - get most recent version - i'll get v41, check if there is adb connection - by adb devices, if no - troubleshoot as in many threads here on xda until everything works.
at this moment i've got Havoc OS v 3.0 installed, unfortunetely with same limitations as 2.9 - no FP, no lux metering, and weird battery behaviour (sometimes cpu isn't clocked down when screen off - it can be tuned by eg. Kernel adiutor after rooting with magisk flashed from twrp.)
simplified guide:
- unlock bootloader
- flash twrp from fastboot
- select to start recovery on phone's fastboot menu (volume keys+confirm by power)
- enter your password to decrypt data
- flash vbmeta.img from PC by adb command
- at this stage I made a restart to twrp from twrp menu
- there's shouldn't be any prompt about data encryption
- made a cpmplete backup of the phone - backup to SD card, or to internal and at this stage copy entire backup folder to PC
- wipe: dalvik/cache/system/data
- install system img from a file GSI
- reboot to recovery
- install gapps, if error 70 --> goto wipe, advanced, resize system partition, back to install, install gapps
- reboot
if bootloops - format data partition
Click to expand...
Click to collapse
So gsi roms also have fingerprint problems ... However, more than a custom rom, I was interested in coloros with root ...
I can't give up the fingerprint though because some applications of the company I work for use it for authentication ...

I managed to root, magisk 20.3 zip flash on twrp, on the European version a17 with this guide:
https://forum.xda-developers.com/showpost.php?p=81579961&postcount=44
To make the vbmeta flash command work I used the minimal adb version 1.43, with previous versions it doesn't work.
The fingerprint works very well and energy consumption has not changed compared to use with locked boot.
After carrying out all the procedure, the magisk manager indicates the certified safety net unlike the play store which is instead not certified. To have it certified, you need to download the Device ID app, copy the GSF code that gives you the result by opening it and insert it on the page of this link:
https://www.google.com/android/uncertified/?pli=1
After having it delete the data of google service framework and google play store, force the arrest of the second and reopen it ...

hammerheading said:
I used this guide, it works the same for X2.
Click to expand...
Click to collapse
Except the deeptesting apk in that guide isn't compatible with the x2 - at least not with the eu version. Funnily enough the apk for the realme 5 is compatible - see this post: https://forum.xda-developers.com/showpost.php?p=81014949&postcount=63

Sandalwood83 said:
Except the deeptesting apk in that guide isn't compatible with the x2 - at least not with the eu version. Funnily enough the apk for the realme 5 is compatible - see this post: https://forum.xda-developers.com/showpost.php?p=81014949&postcount=63
Click to expand...
Click to collapse
Ok my bad then, i follow more than one guide so im not sure were i got the apk from. anyway good job finding it for future unlocks!

ROM Stock EU Version
Here the ROM Stock EU https:// drive.google.com/file/d/1-GpV3YBMCCCrQPvCKqqK3cYRXmBMzTCy/view?usp=drivesdk
Just copy the link

GUIDE: Install GSI Treble Roms on Honor 8X Max ARE-AL00

Hello Team,
Well, I wish that there was a special special section for the Honor 8X MAX, as there was so many things we can add to it, but well, let's post in this section
Most devices that came with Android 8.1 are likely to be Treble GSI compatible, so, the thng is that you just gotta find what Partition it uses.
For this device, it was kinda tricky as it was supposed to be A partition but I found out that it on EMUI 8 neither or AB worked, so after several tests, I found out that using any EMUI 9, we gotta use AB and not A, so I tried LOS 17.1 and worked like a charm but as TWRP is not the best for this device and I did not want to bother decrypt it, then root and install GAPPS, I preferred to install AOSP 10 from phhusson now and it works like a charm. The pros of this rom are that it is already "Rooted" and "Gapped", so I would highly recommend it :good:
Requirements::
* Unlocked Bootloader (Not explained here, so you need to use HCU Unlock and purchase a credit for that);
* Your Recovery has to be stock, so if you have TWRP, I recommend to reflash the stock one;
* Choose an ARM64 AB GSI Rom from here;
BUGS:
1. The device might show as not certified, so you won't be able to use any Google services until you register your device. Guide from Androidsage to help doing that;
2. Brightness seems to be at 50% when set at a maximum. This issue might be due to the Vendor Overlays (not a 100% sure though), I am investigating this, but I am using the device as it is and it is fine for me, until we find a solution for it.
Quick Guide:
1. Turn off your phone and then start it with Power and VOL+, until you see the message of the unlocked phone;
2. Wait until you see the Stock recovery not eRecovery;
3. Wipe and reset, Type "YES" and wait for wiping;
4. Plug the USB Cable to PC, reboot the phone while pressing VOL - ;
5. You should see the Android Fastboot now;
6. On Windows download ADB tools and Linux or Mac they can be added using terminal (You can find it easily by doing a simple search);
7. To make sure the phone is correctly connected, type in the CMD Line or Terminal: fastboot devices ;
8. You should see a series of numbers, so now you can flash by typing: fastboot flash system WHATEVERGSIIMAGEYOUCHOOSE.IMG ;
9. Wait about 2-3 minutes and then when the flash is finished, type: fastboot reboot ;
10. That's it! Your phone should now boot to your preferred GSI ROM with more or less everyhing working

riadtaihi said:
Hello Team,
Well, I wish that there was a special special section for the Honor 8X MAX, as there was so many things we can add to it, but well, let's post in this section
Most devices that came with Android 8.1 are likely to be Treble GSI compatible, so, the thng is that you just gotta find what Partition it uses.
For this device, it was kinda tricky as it was supposed to be A partition but I found out that it on EMUI 8 neither or AB worked, so after several tests, I found out that using any EMUI 9, we gotta use AB and not A, so I tried LOS 17.1 and worked like a charm but as TWRP is not the best for this device and I did not want to bother decrypt it, then root and install GAPPS, I preferred to install AOSP 10 from phhusson now and it works like a charm. The pros of this rom are that it is already "Rooted" and "Gapped", so I would highly recommend it :good:
Requirements::
* Unlocked Bootloader (Not explained here, so you need to use HCU Unlock and purchase a credit for that);
* Your Recovery has to be stock, so if you have TWRP, I recommend to reflash the stock one;
* Choose an ARM64 AB GSI Rom from here;
BUGS:
1. The device might show as not certified, so you won't be able to use any Google services until you register your device. Guide from Androidsage to help doing that;
2. Brightness seems to be at 50% when set at a maximum. This issue might be due to the Vendor Overlays (not a 100% sure though), I am investigating this, but I am using the device as it is and it is fine for me, until we find a solution for it.
Quick Guide:
1. Turn off your phone and then start it with Power and VOL+, until you see the message of the unlocked phone;
2. Wait until you see the Stock recovery not eRecovery;
3. Wipe and reset, Type "YES" and wait for wiping;
4. Plug the USB Cable to PC, reboot the phone while pressing VOL - ;
5. You should see the Android Fastboot now;
6. On Windows download ADB tools and Linux or Mac they can be added using terminal (You can find it easily by doing a simple search);
7. To make sure the phone is correctly connected, type in the CMD Line or Terminal: fastboot devices ;
8. You should see a series of numbers, so now you can flash by typing: fastboot flash system WHATEVERGSIIMAGEYOUCHOOSE.IMG ;
9. Wait about 2-3 minutes and then when the flash is finished, type: fastboot reboot ;
10. That's it! Your phone should now boot to your preferred GSI ROM with more or less everyhing working
Click to expand...
Click to collapse
Hi,
Great job, very detailed.
I've faced a situation when trying to flash many GSI img's (Lineage 18, Pixel Exp+, AOSP). The recovery (stock then TWRP) returned "image is too large for the partition". I've ARE-AL00C (4/128) with unlocked BL. Is there any workaround ?

hatemelectr said:
Hi,
Great job, very detailed.
I've faced a situation when trying to flash many GSI img's (Lineage 18, Pixel Exp+, AOSP). The recovery (stock then TWRP) returned "image is too large for the partition". I've ARE-AL00C (4/128) with unlocked BL. Is there any workaround ?
Click to expand...
Click to collapse
Some images simply do not work, so you will need to check for other images simply.

Just install this one : https://github.com/phhusson/treble_...nload/v222/system-quack-arm64-ab-gapps.img.xz
root&gapps&backlight working
of course you'll need Device+ID.apk and register ID with Google but that's easy and simple

Device: Huawei 8x Max AR00
The Quack version works but sadly it is Android 10. I have found many Android 12L GSI roms that I would like to use but the brightness is an issue on all of them. Anyone know how to copy the Quack backlight vendor display and patch it to the newer GSI roms? Tried buildprop GSI wont boot (Crdroid, Lineage 19) Tried Dirty flashing, obviously didn't work. Can't seem to find the file containing the slider brightness limitations. Phherson gives rom backlight options and tried several combinations, and yes rebooted everytime none of them work. Any ideas?

riadtaihi said:
Hello Team,
Well, I wish that there was a special special section for the Honor 8X MAX, as there was so many things we can add to it, but well, let's post in this section
Most devices that came with Android 8.1 are likely to be Treble GSI compatible, so, the thng is that you just gotta find what Partition it uses.
For this device, it was kinda tricky as it was supposed to be A partition but I found out that it on EMUI 8 neither or AB worked, so after several tests, I found out that using any EMUI 9, we gotta use AB and not A, so I tried LOS 17.1 and worked like a charm but as TWRP is not the best for this device and I did not want to bother decrypt it, then root and install GAPPS, I preferred to install AOSP 10 from phhusson now and it works like a charm. The pros of this rom are that it is already "Rooted" and "Gapped", so I would highly recommend it :good:
Requirements::
* Unlocked Bootloader (Not explained here, so you need to use HCU Unlock and purchase a credit for that);
* Your Recovery has to be stock, so if you have TWRP, I recommend to reflash the stock one;
* Choose an ARM64 AB GSI Rom from here;
BUGS:
1. The device might show as not certified, so you won't be able to use any Google services until you register your device. Guide from Androidsage to help doing that;
2. Brightness seems to be at 50% when set at a maximum. This issue might be due to the Vendor Overlays (not a 100% sure though), I am investigating this, but I am using the device as it is and it is fine for me, until we find a solution for it.
Quick Guide:
1. Turn off your phone and then start it with Power and VOL+, until you see the message of the unlocked phone;
2. Wait until you see the Stock recovery not eRecovery;
3. Wipe and reset, Type "YES" and wait for wiping;
4. Plug the USB Cable to PC, reboot the phone while pressing VOL - ;
5. You should see the Android Fastboot now;
6. On Windows download ADB tools and Linux or Mac they can be added using terminal (You can find it easily by doing a simple search);
7. To make sure the phone is correctly connected, type in the CMD Line or Terminal: fastboot devices ;
8. You should see a series of numbers, so now you can flash by typing: fastboot flash system WHATEVERGSIIMAGEYOUCHOOSE.IMG ;
9. Wait about 2-3 minutes and then when the flash is finished, type: fastboot reboot ;
10. That's it! Your phone should now boot to your preferred GSI ROM with more or less everyhing working
Click to expand...
Click to collapse
After trying many different gai variants and versions I found they all have an issue with browsers. Both chrome and edge freeze after scrolling a bit. I'm wondering if this because the GSI uses too much storage space and cannot buffer? Tried to port GSI onto other partitions such as cust, prod didn't work. Even Magisk flashes successfully but does not appear in the rom. The a and b is confusing like EMUI uses both and the TWRP does not decrypt and no Verity commands don't work either. The havoc rom seems to work the best with gapps pico flashed.
~ Android 12 backlight issues had to revert to android 10
~ All GSI have the common browsers freezing. Have to use VIA browser (basic)
~ Magisk won't install have to port to ramdisk, but isn't that the TWRP recovery?

Hello, which one is the Qualcomm driver to be installed for sdm660?

[Guide] Root for Redmi Note 9 - Mediatek (Helio G85)

Preamble:
After a bit of research, I've found a simple way to - at least - obtain root privileges on the basic version of Redmi Note 9 (Mediatek - Helio G85).
The procedure has been tested on a Redmi Note 9 Global NFC 4/128 (Model: M2003J15SG) with MIUI Global 11.0.5.
The attached files comprise:
Original Boot Image from MIUI Global 11.0.5 (provided as a courtesy, download your own copy from MIUI Website if you wish)
Patched Boot Image from Magisk on MIUI Global 11.0.5 (again, the file provided as a courtesy; you can generate your own file, on your device.)
VBMETA Patched Image: essential to the process, this file has not been created by me. Courtesy of user Neko-kun from MI.cn Forum. I can only confirm that the file works as expected; please, if you have the required expertise, inspect the file and report your findings.
Warning:
This procedure depends on having previously unlocked the bootloader. Doing so you have read, understood and accepted all the information regarding security and potential stability issues given by XIAOMI before completing the procedure.
Also, this means you have understood and accepted potential warranty issues arising from such procedure, and you understand the risks associated with a rooted device.
I'm not responsible for any damage, loss of personal data, brick or loss of usability arising from following this procedure and/or from any user error committed by doing so.
As a result, your warranty may be void, according to laws in effect in your state.
This procedure is only valid for Redmi Note 9 (not the Pro version, not the 9S version) with MEDIATEK chipset
Note:
Always make a back-up of your data! This procedure will re-initialize the device.
Requirements:
A valid MI Account, associated with the phone, used to certification in the bootloader unlocking procedure. (via official MI UNLOCK)
Unlocked Bootloader (new devices usually have a 7-day waiting period)
A personal computer with FASTBOOT installed, basic knowledge of FASTBOOT commands, drivers correctly installed on your system of choice. (for windows users, a valid solution is "Minimal ABD and Fastboot".)
Resources:
Magisk Manager
Boot Image / Magisk Patched Boot Image / VBMeta Image - link or see attached files
Procedure:
Download the attached files (or generate the first two on your own device, using Magisk Manager).
Copy the prepared files inside the fastboot directory (so you don't have to worry about file path in the following steps)
Reboot the phone into Fastboot Mode (hold Power+Volume Down until fastboot screen)
Connect the phone to the computer, open fastboot terminal and issue the following commands. BE PATIENT AND DOUBLE CHECK EVERYTHING BEFORE CONFIRMING! Text between round brackets are comments, it must not be copied.
Code:
fastboot devices (check your phone is the only device shown)
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (this disables system changes)
fastboot erase userdata (this will clear user data!)
fastboot erase cache
fastboot flash boot magisk_patched.img
fastboot reboot
The following first reboot will take a while. After completing the initial configuration, install the latest Magisk Manager (at the time of writing, v. 7.5.1) and continue with the configuration following the in-app prompt.
Phone will reboot at the end of the procedure. Launch once again Magisk Manager, select the "Beta Channel" for updates and enable Magisk Hide.
Reload Magisk Manager, check for Safety Net: you should have the green light.
Enjoy your root privileges. (aka, get rid of the bloatware )
Known BUGs / LIMITATIONS:
Can't modify /system partition
Need to temporary set SELinux to permissive in order to remove system apps. Please refer to this post.

Removing "Bloatware"
Probably one the main reasons for obtaining root privileges is to get rid of some default apps which come bundled with the official MIUI.
Given the current situation for this device, using classic methods (such as Titanium Backup / System App Remover / etc.) is not possible and - most probably - attempting in doing so will result in a soft-brick.
Instead, there is a particularly useful Magisk Module that can be used for this scope: Debloater.
You can read more about it here on XDA; the installation procedure will vary just a bit since there is currently no TWRP support for the Helio G85 Redmi Note 9.
Installing Debloater
Launch Magisk Manager and select "Download" from the menu
Use the search function to locate the package "Busybox for Android NDK"
Install the package, and chose to skip the reboot at the end of the procedure.
Use the search function to locate the package "Debloater Terminal Emulator"
Install the package and this time proceed with the reboot
When the reboot is complete, install any terminal emulator app from PlayStore (like Termux)
Open the terminal and issue:
Code:
su
(confirm the request for superuser access) and then
Code:
debloat
Now you can use Debloat to remove all the unwanted applications that come bundled with the ROM.
Please refer to the video included in the post mentioned above to learn more about Debloat and how to use it.

One Question
Can i know this work for Redmi Note 9 global non NFC?

The download link in the first post does not work any longer ... Gives a 404. Please re-upload and don't use XDA's upload space. Thanks!

dfahren said:
The download link in the first post does not work any longer ... Gives a 404. Please re-upload and don't use XDA's upload space. Thanks!
Click to expand...
Click to collapse
Sorry for the inconvenience, there is still the MEGA link from the first post up and working.
Here it is: https://mega.nz/file/ucFDXIaY#FrUllKuUASoStlSvrcMYABsbYv6ie-WHR4zOqJMdP4E

[email protected] said:
Can i know this work for Redmi Note 9 global non NFC?
Click to expand...
Click to collapse
It should work, since there is no significant difference between the two models regarding the rooting procedure. But I have no way of testing it because I don't have that phone version on hand.

N3OMOD said:
It should work, since there is no significant difference between the two models regarding the rooting procedure. But I have no way of testing it because I don't have that phone version on hand.
Click to expand...
Click to collapse
Hi there,
I can confirm the aforementioned procedure to root one's phone does work. I own a Redmi Note 9, Code: merlinnfc, Version: 11.0.5.0 (QJOEUXM). As you can see it's the European variant.
However, I didn't use the Zip archive the OP provided since it is meant for the global variant and (as of now) I don't see any necessity to reflash my phone to the global firmware.
I strongly recommend everybody to have Magisk Manager generate patched boot.img files and NOT use the original author's boot.img file! This holds true especially for those guys like me who own, say, an indian, chinese or european variant or run a different firmware version like, e.g., 11.0.3.0.
What's also important to mention is that there is no special "patched" vbmeta file. That guy "neko-kun" simply used the one contained in the original full firmare downloadable from Xiaomi's servers. Here you also have to make sure you use the one that matches the installed firmware version on your phone. Do not flash any other or you might get a brick!
If anybody of you guys has managed to get AFWall up and running and apply iptable rules without error, please drop me a line.
Thanks and good speed to everybody!

dfahren said:
Hi there,
I can confirm the aforementioned procedure to root one's phone does work. I own a Redmi Note 9, Code: merlinnfc, Version: 11.0.5.0 (QJOEUXM). As you can see it's the European variant.
Click to expand...
Click to collapse
Thank you for the feedback! That is the same version (hardware and ROM) I used to test the procedure before writing the article.
dfahren said:
However, I didn't use the Zip archive the OP provided since it is meant for the global variant and (as of now) I don't see any necessity to reflash my phone to the global firmware.
I strongly recommend everybody to have Magisk Manager generate patched boot.img files and NOT use the original author's boot.img file! This holds true especially for those guys like me who own, say, an indian, chinese or european variant or run a different firmware version like, e.g., 11.0.3.0.
Click to expand...
Click to collapse
Indeed, as I mentioned in the first post, those files are provided only as a courtesy for those who may have the same device with the same firmware: I strongly encourage everyone to make their own using Magisk Manager.
dfahren said:
What's also important to mention is that there is no special "patched" vbmeta file. That guy "neko-kun" simply used the one contained in the original full firmare downloadable from Xiaomi's servers. Here you also have to make sure you use the one that matches the installed firmware version on your phone. Do not flash any other or you might get a brick!
Click to expand...
Click to collapse
Thanks for the clarification about the vbmeta file. I will update the post to clarify this aspect.: good:
The original explanation from the user was a bit difficult to understand, hence the warning about the possibility of a "patched" file. (I didn't want to create any trouble for anyone).
Also, a little comforting for anyone who might incur in a (soft)brick: I have seen some people flashing only the "boot.img" and ending up in an infinite bootloop (black screen with "redmi" logo).
Should that happen, you can always enter the fastboot mode (keeping pressed the power+vol down for a bit longer than usual) and re-flash the original "boot.img" extracted from the official ROM image available on MIUI site.
dfahren said:
If anybody of you guys has managed to get AFWall up and running and apply iptable rules without error, please drop me a line.
Thanks and good speed to everybody!
Click to expand...
Click to collapse
Will let you know as soon as I have some time to test it.
(sidenote for those interested: for now I can confirm that AdAway is working fine)

Followed the steps, worked flawlessly on my Redmi Note 9 (Merlin) 3gb ram 64gb storage purchased in Europe, running Global 11.0.5.
Thank you so very much!
I had successfully done this in the past but messed something up with xposed later, I won't xposed it this time and just enjoy my root-ness.

N3OMOD said:
Thanks for the clarification about the vbmeta file. I will update the post to clarify this aspect.: good:
The original explanation from the user was a bit difficult to understand, hence the warning about the possibility of a "patched" file. (I didn't want to create any trouble for anyone).
...
Also, a little comforting for anyone who might incur in a (soft)brick: I have seen some people flashing only the "boot.img" and ending up in an infinite bootloop (black screen with "redmi" logo).
Should that happen, you can always enter the fastboot mode (keeping pressed the power+vol down for a bit longer than usual) and re-flash the original "boot.img" extracted from the official ROM image available on MIUI site.
...
(sidenote for those interested: for now I can confirm that AdAway is working fine)
Click to expand...
Click to collapse
The original explanation from user "neko-kun" seemed to me an automatic translation hence the rather weird language.
I can testify to the statement that you can reflash the original boot.img file should you enter a bootloop (which I got).
AdAway is also working for me as does AFWall+ (I needed to leave logging of blocked packets as it is -> off)

N3OMOD said:
Thank you for the feedback! That is the same version (hardware and ROM) I used to test the procedure before writing the article.
Indeed, as I mentioned in the first post, those files are provided only as a courtesy for those who may have the same device with the same firmware: I strongly encourage everyone to make their own using Magisk Manager.
Thanks for the clarification about the vbmeta file. I will update the post to clarify this aspect.: good:
The original explanation from the user was a bit difficult to understand, hence the warning about the possibility of a "patched" file. (I didn't want to create any trouble for anyone).
Also, a little comforting for anyone who might incur in a (soft)brick: I have seen some people flashing only the "boot.img" and ending up in an infinite bootloop (black screen with "redmi" logo).
Should that happen, you can always enter the fastboot mode (keeping pressed the power+vol down for a bit longer than usual) and re-flash the original "boot.img" extracted from the official ROM image available on MIUI site.
Will let you know as soon as I have some time to test it.
(sidenote for those interested: for now I can confirm that AdAway is working fine)
Click to expand...
Click to collapse
i'm having an infinite bootloop and keep pressing power + vol down didn't help , what should i do ?

@noodlelicious
That's very unfortunate. I know this situation only too well. First of all what type of Redmi Note 9 do you have. Please post the "Product Model" number you can find on your phone and package. Mine, for example, is M2003J15SG. Which version of MIUI did you run? Is it MIUI 11 or the newer MIUI 12? Do you run some regional flavor of MIUI such as European, Russian, Indonesian, Indian or China?
Second, did you flash the correct vbmeta file? I mean this is an IMG file that must match the flavor? The original poster supplied a vbmeta IMG file for the global variant that might (I'm really not sure) not fit to your specific flavor.
Ok, how do you get rid of the boot loop? I manged to stop the loop by pressing Volume down continuously for about a minute. After that my phone reboots into fastboot mode. Please DO NOT press the power button, this is unnecessary.
When in fastboot mode reflash your original boot.img according to the steps above.
I hope that helps you a bit.
Best wishes,
Didi

dfahren said:
@noodlelicious
That's very unfortunate. I know this situation only too well. First of all what type of Redmi Note 9 do you have. Please post the "Product Model" number you can find on your phone and package. Mine, for example, is M2003J15SG. Which version of MIUI did you run? Is it MIUI 11 or the newer MIUI 12? Do you run some regional flavor of MIUI such as European, Russian, Indonesian, Indian or China?
Second, did you flash the correct vbmeta file? I mean this is an IMG file that must match the flavor? The original poster supplied a vbmeta IMG file for the global variant that might (I'm really not sure) not fit to your specific flavor.
Ok, how do you get rid of the boot loop? I manged to stop the loop by pressing Volume down continuously for about a minute. After that my phone reboots into fastboot mode. Please DO NOT press the power button, this is unnecessary.
When in fastboot mode reflash your original boot.img according to the steps above.
I hope that helps you a bit.
Best wishes,
Didi
Click to expand...
Click to collapse
Thank you so much for replying my problems.
First, i'm using M2003J15SS
I'm running on latest miui 11 indonesian.
I'm flashing the vbmeta on first post , i skip all the comment section and straight install all the things there.
I already put a rubber band on my vol down since 7 hours ago and still got no fastboot.
What else can i do ?

What about entering recovery?
noodlelicious said:
Thank you so much for replying my problems.
First, i'm using M2003J15SS
I'm running on latest miui 11 indonesian.
I'm flashing the vbmeta on first post , i skip all the comment section and straight install all the things there.
I already put a rubber band on my vol down since 7 hours ago and still got no fastboot.
What else can i do ?
Click to expand...
Click to collapse
Try to enter stock recovery, if you can, select mi assitant. After that connect trough adb and run "adb reboot bootloader", that should do the trick.
If phone isnt booting none of main enviroments (system, recovery or fastboot/bootloader) battery drainage may restablish normal boot order. Just remember that if in any case it boots to recovery, use adb command to reboot to bootloader.

Tested on RN9 Global non-NFC (M2003J15SS) with MIUI 12 Global
Hi, just to inform. The following was tested in Redmi Note 9 Global non-NFC (M2003J15SS) with MIUI 12 Global.
- Patched boot image from MIUI12 Global (Android 10) works fine if dm-verity and forced encryption are disable at the time of making the boot image with magisk.
- vbmeta file provided by OP also works (I think any file would work if it's flashed with "--disable-verity --disable-verification" option. This option is essential to avoid bootloop after flashing any non-stock (or patched) image to any partition:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
The vbmeta file I used was extracted (and possibly) edited from a previous version of MIUI (MIUI11), and applied over MIUI12 ROM, that's why I think any file could be used.

Hi .. Is there a way to write to system / app. I need to be able to pass an application to system. Thank you.

Does netflix still work in HD after having the BL unlocked and further rooted?

How to patch vbmeta
---------- Post added at 05:50 PM ---------- Previous post was at 05:14 PM ----------
N3OMOD said:
Preamble:
After a bit of research, I've found a simple way to - at least - obtain root privileges on the basic version of Redmi Note 9 (Mediatek - Helio G85).
The procedure has been tested on a Redmi Note 9 Global NFC 4/128 (Model: M2003J15SG) with MIUI Global 11.0.5.
The attached files comprise:
Original Boot Image from MIUI Global 11.0.5 (provided as a courtesy, download your own copy from MIUI Website if you wish)
Patched Boot Image from Magisk on MIUI Global 11.0.5 (again, the file provided as a courtesy; you can generate your own file, on your device.)
VBMETA Patched Image: essential to the process, this file has not been created by me. Courtesy of user Neko-kun from MI.cn Forum. I can only confirm that the file works as expected; please, if you have the required expertise, inspect the file and report your findings.
Warning:
This procedure depends on having previously unlocked the bootloader. Doing so you have read, understood and accepted all the information regarding security and potential stability issues given by XIAOMI before completing the procedure.
Also, this means you have understood and accepted potential warranty issues arising from such procedure, and you understand the risks associated with a rooted device.
I'm not responsible for any damage, loss of personal data, brick or loss of usability arising from following this procedure and/or from any user error committed by doing so.
As a result, your warranty may be void, according to laws in effect in your state.
This procedure is only valid for Redmi Note 9 (not the Pro version, not the 9S version) with MEDIATEK chipset
Note:
Always make a back-up of your data! This procedure will re-initialize the device.
Requirements:
A valid MI Account, associated with the phone, used to certification in the bootloader unlocking procedure. (via official MI UNLOCK)
Unlocked Bootloader (new devices usually have a 7-day waiting period)
A personal computer with FASTBOOT installed, basic knowledge of FASTBOOT commands, drivers correctly installed on your system of choice. (for windows users, a valid solution is "Minimal ABD and Fastboot".)
Resources:
Magisk Manager
Boot Image / Magisk Patched Boot Image / VBMeta Image - link or see attached files
Procedure:
Download the attached files (or generate the first two on your own device, using Magisk Manager).
Copy the prepared files inside the fastboot directory (so you don't have to worry about file path in the following steps)
Reboot the phone into Fastboot Mode (hold Power+Volume Down until fastboot screen)
Connect the phone to the computer, open fastboot terminal and issue the following commands. BE PATIENT AND DOUBLE CHECK EVERYTHING BEFORE CONFIRMING! Text between round brackets are comments, it must not be copied.
Code:
fastboot devices (check your phone is the only device shown)
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (this disables system changes)
fastboot erase userdata (this will clear user data!)
fastboot erase cache
fastboot flash boot magisk_patched.img
fastboot reboot
The following first reboot will take a while. After completing the initial configuration, install the latest Magisk Manager (at the time of writing, v. 7.5.1) and continue with the configuration following the in-app prompt.
Phone will reboot at the end of the procedure. Launch once again Magisk Manager, select the "Beta Channel" for updates and enable Magisk Hide.
Reload Magisk Manager, check for Safety Net: you should have the green light.
Enjoy your root privileges. (aka, get rid of the bloatware )
Known BUGs / LIMITATIONS:
Can't modify /system partition
Need to temporary set SELinux to permissive in order to remove system apps. Please refer to this post.
Click to expand...
Click to collapse
can i use original vbmeta in rom files for this command
"fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (this disables system changes)"
Because my phone is redmi note 9 (m2003j15ss) updated to 12.03.0(QJOMIXM) miui version
If not with the original, how do I patch this file?

can this be used to root the EU model: MZB9410EU ?

farvehar09 said:
---------- Post added at 05:50 PM ---------- Previous post was at 05:14 PM ----------
can i use original vbmeta in rom files for this command
"fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (this disables system changes)"
Because my phone is redmi note 9 (m2003j15ss) updated to 12.03.0(QJOMIXM) miui version
If not with the original, how do I patch this file?
Click to expand...
Click to collapse
Yes u can, i use the original vbmeta from miui_MERLINIDGlobal_V12.0.1.0.QJOIDXM_709d727d58_10.0.zip (ID variant)

Question Best TWRP installation tutorial thread/video for Poco F3?

I am trying to Unlock my bootloader, Install TWRP then install Magisk for the customizations. I connected my Mi Account on my phone, and I have to wait 5 more days from the 7 days wait period. Meanwhile I was wondering If there were any simple tutorials for Installing TWRP out here, or any specific channel/video you guys would recommend for my phone. which I can watch and prepare myself, while I wait.
I checked YouTube, there are a few good tutorials there, but they each do a slightly different method, or they mention that all the Xiaomi phones will have the same method but go on to mention that "for this specific X phone you will have to do slightly differently" and that's where It gets confusing.
I don't want to end up bricking my phone in the process, that's why I was looking to ask directly in the forums so I can get more relevant suggestions, rather than just watching a YouTube follow along video which the channel owner doesn't check comments on.
Any suggestions, recommendations welcome

Suggestion before flashing the ROM you need to read the whole page of the ROM because it's the number one thing that people missed up and bricking their phone because they don't read the whole post. Also backup your data.

percharnel said:
Suggestion before flashing the ROM you need to read the whole page of the ROM because it's the number one thing that people missed up and bricking their phone because they don't read the whole post. Also backup your data.
Click to expand...
Click to collapse
I'm just tryna install Magisk as the end goal. No plans for ROM currently. But thanks for the suggestion nontheless. Something to keep in mind in case I change my mind later

My advice for you is as follows:
Let TWRP go and don't use OpenGApps.
Use the things that are working flawlessly.
Take LOS Recovery instead of mighty, but outdated TWRP,
Take MindTheGApps instead of highly customizable OpenGApps.
(Think about LOS as your custom ROM).
I used to use both together with my Mi 8. But installing LOS, the recovery and GApps on my Poco F3 was possible within round about an hour. All this went well, while I watched Netflix and cuddled a beautiful woman on her Sofa. By the way - I had to install ADB and divers on her Surface Laptop at first.

Hi,
You could check out My Beginners guide post:
Also a Very important Note, "NEVER RE-LOCK YOUR BOOLOADER" with a custom recovery or Custom Rom installed, as this will BRICK your device and you will have to pay to get it unbricked.
The Re-lock could happen when you use the MIFlash Tool and select "Clean all and Lock".

SDK Platform Tools (ADB & Fastboot): https://developer.android.com/tools/releases/platform-tools
Xiaomi USB Driver: http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar
(link source: https://developer.android.com/studio/run/oem-usb)
OrangeFox Recovery: https://orangefox.download/device/alioth
Notes:
-During BL-Unlock, your phone will auto. factory reset.
-Unlike on many AOSP-ROMs, using a Custom Recovery on MIUI will cause OTAs to not work anymore as the MIUI Update relies on MIUI Recovery. Instead you have to manually flash each MIUI-update in your Custom Recovery.
-I'm suggesting OrangeFox Recovery, because it never failed me personally, and because it's simply much more modern than TWRP.
-On MIUI, Magisk (by default) will cause you to fail Google SafetyNet, which means Banking Apps, Netflix, and many other apps won't work. You will have to spoof Attestation to "Basic" by using a Magisk Module that changes the fingerprint. And you'll have to hide Magisk from Play Services (.gms and .gms.unstable specifically) and user-apps that check for Magisk/Root.
Boot to Fastboot Mode (Power + Vol Down),
extract "recovery.img" from OrangeFox.zip,
Open Terminal inside Platform-Tools folder and do "fastboot boot <path_to_recovery.img>"
To install OrangeFox, go to its Menu and tap "Install current Recovery" (something along those lines)
To install Magisk, you can rename Magisk.apk to Magisk.zip and flash it in Custom Recovery (only TWRP or OrangeFox!, other recoveries may not be able to install anything other than the ROM ZIP file). It's the easy method of getting Magisk, however flashing Magisk.zip in Recovery isn't supported anymore by TopJohnWu.
Recommended way is to obtain the boot.img and patch it with the Magisk App. I personally do a Boot Backup with OrangeFox Recovery, patch the backup file, and restore the magisk-patched Boot file with OFox.
My break is over, so I'll have to cut here, but I think I have my socials linked in my profile. if you need more help you can message me privately on TG

cyanGalaxy said:
SDK Platform Tools (ADB & Fastboot): https://developer.android.com/tools/releases/platform-tools
Xiaomi USB Driver: http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar
(link source: https://developer.android.com/studio/run/oem-usb)
OrangeFox Recovery: https://orangefox.download/device/alioth
Notes:
-During BL-Unlock, your phone will auto. factory reset.
-Unlike on many AOSP-ROMs, using a Custom Recovery on MIUI will cause OTAs to not work anymore as the MIUI Update relies on MIUI Recovery. Instead you have to manually flash each MIUI-update in your Custom Recovery.
-I'm suggesting OrangeFox Recovery, because it never failed me personally, and because it's simply much more modern than TWRP.
-On MIUI, Magisk (by default) will cause you to fail Google SafetyNet, which means Banking Apps, Netflix, and many other apps won't work. You will have to spoof Attestation to "Basic" by using a Magisk Module that changes the fingerprint. And you'll have to hide Magisk from Play Services (.gms and .gms.unstable specifically) and user-apps that check for Magisk/Root.
Boot to Fastboot Mode (Power + Vol Down),
extract "recovery.img" from OrangeFox.zip,
Open Terminal inside Platform-Tools folder and do "fastboot boot <path_to_recovery.img>"
To install OrangeFox, go to its Menu and tap "Install current Recovery" (something along those lines)
To install Magisk, you can rename Magisk.apk to Magisk.zip and flash it in Custom Recovery (only TWRP or OrangeFox!, other recoveries may not be able to install anything other than the ROM ZIP file). It's the easy method of getting Magisk, however flashing Magisk.zip in Recovery isn't supported anymore by TopJohnWu.
Recommended way is to obtain the boot.img and patch it with the Magisk App. I personally do a Boot Backup with OrangeFox Recovery, patch the backup file, and restore the magisk-patched Boot file with OFox.
My break is over, so I'll have to cut here, but I think I have my socials linked in my profile. if you need more help you can message me privately on TG
Click to expand...
Click to collapse
I'm considering to switch from latest TWRP 3.7.0_9-0 to OFR R11.1_3_A12 on my old dipper. But that dosn't play a role here, because I have some general questions about it that are the same for alioth.
Just want to try it out and see, if it's really so much better than TWRP like lots of people tried to tell me in the last years...
So may I ask you some vital questions?
1. From what I understood, it should be possible to flash OFR easily through my already installed TWRP on the device, right?
2. Which decryption methods does the A12-Branch of OFR support? A12 only or A11+A12 so that it's possible to dirty flash from A11 to 12?
3. In OFR there's an inbuild (and easy to handle?) direct management of the preinstalled Apps, right? This could be avery interesting feature for me, especially with regards to the slowly dying OpenGApps-Project that was imho the best way to customize GApps over the last few years...

If you are a visual learner just watch them carefully, watch the suggestions above they work great, works perfectly on OFOX too

Develop Bugs

welcome