Galaxy N975F stuck on "Samsung Galaxy Note10+" screen. - Samsung Galaxy Note 10+ Questions & Answers

I ran the December 2019 update to upgrade to Android 10, and now my phone is stuck on the Samsung Galaxy Note10+ screen. I can reset with Vol Down and Bixby buttons, but Vol Up + Bixby doesn't go to Recovery anymore, and I can't boot to Download. Any actions I can take to restore service?
Thanks in Advance.

Did you manage to fix this? I have the exact same problem.
Note10+ bricked/"Samsung Galaxy Note10+" screen bootloop. Can only perform a soft reset - but I need to boot into Recovery/Download mode!
Pulling my hair out, I've tried almost everything I can think of.

Werewolph said:
I ran the December 2019 update to upgrade to Android 10, and now my phone is stuck on the Samsung Galaxy Note10+ screen. I can reset with Vol Down and Bixby buttons, but Vol Up + Bixby doesn't go to Recovery anymore, and I can't boot to Download. Any actions I can take to restore service?
Thanks in Advance.
Click to expand...
Click to collapse
You have to either A: be fast and move from vol down and Bixby when the screen goes black quickly to holding volume up and down together and plug the sun (connected to pc) into the phone
B: use some other tool like chimera tool or Samsung super tool to control rebooting for you

A worked for me. B wouldn't - Chimera, Smart Switch etc would not do anything for me (I paid for Chimera too!). Thanks lots!

Related

Can not get into the initial setup screen

I bought an used Samsung Galaxy Tab Pro 12.2 and tried to delete all ex-owner's stuff and factory reset thru normal tablet setting menu.
All of sudden, the tablet was blacked and there is no new setup screen pop-up for long.
So I went manual recovery mode(volume up, power, home buttons same time) but stuck in 'Downloading... Do not turn off target!!' more than one hour.
How can I get into the initial setup screen?
nbae said:
I bought an used Samsung Galaxy Tab Pro 12.2 and tried to delete all ex-owner's stuff and factory reset thru normal tablet setting menu.
All of sudden, the tablet was blacked and there is no new setup screen pop-up for long.
So I went manual recovery mode(volume up, power, home buttons same time) but stuck in 'Downloading... Do not turn off target!!' more than one hour.
How can I get into the initial setup screen?
Click to expand...
Click to collapse
Hold the power button until it restarts
Sounds like you were holding the volume down key - which takes you to downloading mode. Hold the power button and volume up button. When logo appears, let go of power but keep holding volume button until recovery screen appears. Use volume keys to navigate and power button to accept. Factory reset and clear the cache. Then reboot. You should be good to go
Odin Note Pro 12.2 to factory rather then Do a manual factory.
Google Odin 1.
Download the latest 5.0 Update for your model. This works for me all the time
Oh! One more thing. DO NOT FLASH ANYTHING JUST FACTORY ODIN RESET ONLY OKKK! REASON WHY IS BECAUSE 5.0 SYSTEM DIFFERENT. But if your willing to flash stable roms inbox me I'll gather all stable files
Sent from my SM-N900T using XDA Free mobile app

Did I Brick My new Galaxy Tab S?

First I rooted using CF-Auto-Root by Chainfire Root was verified working used the tablet for a couple hours. Then I booted into TWRP and did a back up and factory wipe then installed IronRom When the installation was complete it said rebooting but TRWP seemed to freeze. So I held the power button until it turned off. It automatically rebooted to the Samsung GALAXY TAB S boot image and thats now where its stuck. If I Hold the power button it does nothing. If I hold the volume down with the power button it shuts off for about a sec or 2 and come right back to the Samsung GALAXY TAB S boot image and stays there. Is there any hope for me?
Model is a T800. was running 4.4.2.
HELP ME PLEASE!!!
I have had serveral devices this is the first time anything like this has happened.
WayneC003 said:
First I rooted using CF-Auto-Root by Chainfire Root was verified working used the tablet for a couple hours. Then I booted into TWRP and did a back up and factory wipe then installed IronRom When the installation was complete it said rebooting but TRWP seemed to freeze. So I held the power button until it turned off. It automatically rebooted to the Samsung GALAXY TAB S boot image and thats now where its stuck. If I Hold the power button it does nothing. If I hold the volume down with the power button it shuts off for about a sec or 2 and come right back to the Samsung GALAXY TAB S boot image and stays there. Is there any hope for me?
Model is a T800. was running 4.4.2.
HELP ME PLEASE!!!
I have had serveral devices this is the first time anything like this has happened.
Click to expand...
Click to collapse
THIS WORKS FOR THE SM-T700
Well, it seems that TWRP was successfully installed. Get back to the TWRP recovery mode: To turn off tab and reboot into TWRP while tab is powered on hold down
Power+VOL DOWN+Home button.
*As soon as* you see the logo, move finger to VOL UP while still holding down Power and Home buttons.
........TiTiB (tweak it 'til it breaks)......
Galaxy Tab S | SMT-T700 | klimtwifi
Ok I managed to get into TWRP..Its version 2.8.6.2 but TWRP freezes on trying to reboot. I have to hold power and volume down button to get to shut off. Then it reboots to Samsung GALAXY Tab S logo. I figured how to get back into TWRP but I can't get past it.
Thank you TiTiB That got me back to TWRP but see above.
Ok, so to answer my question..NO its not bricked ...(on Knees thanking the gods) Managed to restore backup. Did a restore and powered off via power button. Powered back on and tablet booted. Trying to update TWRP to latest version now. Wish me luck. Thank You once again ... TiTiB!1

Stuck on Galaxy Note10+

Hello together,
today i want to reboot my phone because i have no signal.
Than i realyse the my phone is stuck on the Samsung Galaxy Note 10+ Logo at the begining.
I restart my phone many tymes with Volume down + power button.
Than i try to go in twrp recovery with power+power up but i cant.
I try to go i the fastboot with power+vulme down and then put the cable in the laptop but nothing helps.
I run on latest twrp and doctor ketan rom P03.
Any ideas ?
anastasiszn said:
Hello together,
today i want to reboot my phone because i have no signal.
Than i realyse the my phone is stuck on the Samsung Galaxy Note 10+ Logo at the begining.
I restart my phone many tymes with Volume down + power button.
Than i try to go in twrp recovery with power+power up but i cant.
I try to go i the fastboot with power+vulme down and then put the cable in the laptop but nothing helps.
I run on latest twrp and doctor ketan rom P03.
Any ideas ?
Click to expand...
Click to collapse
That sucks to hear man. But are you sure that's the right combination to get into the bootloader?
I'm on the tmobile version note 10+ and you have to shut the phone off and press and hold the Bixby button and the volume up button. Not sure if it's the same for other regions though.
Sent from my [device_name] using XDA-Developers Legacy app
phone plugged into pc.. press vol down and side key until screen goes off.. quickly press vol up vol down and side key until dl mode comes up, basically when screen goes off hold down all buttons until dl mode comes up..
if u end up trying to hold vol down and side key what happens is if its taking a while u end up doing a hard reset and device will seem to not be doing anything bcuz u keep resetting it. at least this is how i get to dl mode in these type situations.
lildoggs said:
I'm on the tmobile version note 10+ and you have to shut the phone off and press and hold the Bixby button and the volume up button. Not sure if it's the same for other regions though.
Click to expand...
Click to collapse
thats for recovery yes but seems he cant get into recovery.

Just upgraded to latest Magisk from the App, now stuck at boot screen HELP!

Just opened the Magisk Manager app, updated from within the app using the Reccommended method, device reboots, now stuck on the 'Samsung Galaxy Note10+ 5G' screen.
I cant even get it into TWRP which is a pain.
vinokirk said:
Just opened the Magisk Manager app, updated from within the app using the Reccommended method, device reboots, now stuck on the 'Samsung Galaxy Note10+ 5G' screen.
I cant even get it into TWRP which is a pain.
Click to expand...
Click to collapse
Reboot to EDL/BROM (search for right key combination) and reflash ROM using SP Flash Tool. Then flash latest Magisk
I have let the phone run down battery, pressed vol up and power, but still nothing.
0purple said:
Reboot to EDL/BROM (search for right key combination) and reflash ROM using SP Flash Tool. Then flash latest Magisk
Click to expand...
Click to collapse
I have already tried key combinations, but still the same.
@hainguyenthao helped me out. Showed me how to get into downlaod mode without pressing power and vol down!
Let the phone power down, leave it for 30 mins or so. then press vol up and vol down and insert USB cable.
OR if phone is in bootloop, press vol down and power till phone reboots, then VERY quickly hold down vol up and vol down and plug in USB cable
Dude, To put device in download mode - Press Volume Up & then Press Volume Down (Keep holding both) and connect device to PC with USB cable.
But for your problem you have to put your device in recovery mode then flash ROM. Still the problem continues, you can try this download link
I've the same problem with my Note 10+... Was on Dr. Ketan Rom and update with magisk app ends in a boot loop, I couldn't break -.-
@vinokirk could you solve the problem?
Edit: Thanks to @starpandi2004 - on the first try I can break the bootloop, but just to the first screen. After choosing download mode, it comes bootloop again -.-
Is it worth to try to lock bootloader and factory reset phone? What will happen? Is the original rom somewhere packed and would be installed again by factory reset?
Saalschlacht said:
I've the same problem with my Note 10+... Was on Dr. Ketan Rom and update with magisk app ends in a boot loop, I couldn't break -.-
@vinokirk could you solve the problem?
Edit: Thanks to @starpandi2004 - on the first try I can break the bootloop, but just to the first screen. After choosing download mode, it comes bootloop again -.-
Is it worth to try to lock bootloader and factory reset phone? What will happen? Is the original rom somewhere packed and would be installed again by factory reset?
Click to expand...
Click to collapse
Bro what about TWRP recovery? can you able access it...
if yes then dirty flash KETAN ROM..it will solve...
just had same same problem.
i connected mine to the pc and use power+up volume until twrp appeear and them restores from last backup
I got the simplest solution for this issue!
If u r stuck on Samsung logo, then try this method.
Turn off the phone by pressing vol down and power button. Once the phone is shut down, release and press again the vol down and power button when u see Samsung note 10 plus screen, then release the power button but keep pressing vol down. Once u see the "Samsung" logo, immediately release the vol down button and quickly press vol up button.
This will boot up without any problem!

Factory resetting a Galaxy Tab Active 3 without the pin code

Hi, how can I factory reset a Galaxy Tab Active 3 without the pin code? I tried rebooting it into recovery mode using the side button + volume down, but that only restarts the device. Side button + volume up + home button won't do anything. Any advice please?
TheTomerP said:
Hi, how can I factory reset a Galaxy Tab Active 3 without the pin code? I tried rebooting it into recovery mode using the side button + volume down, but that only restarts the device. Side button + volume up + home button won't do anything. Any advice please?
Click to expand...
Click to collapse
I am facing the same problem. Please let me know if you managed to get that reset ro reboot to recovery mode.
Many thanks.
Galaxy Tab Active 3 cannot get into Download/Recovery mode​Hello,
I have Galaxy Tab Active 3. When started it says Powered By Know. I am not sure if Know is enabled on it or not. Cannot login into it as I don't know the password. So I wanted to reset the device so I can use it as personal device.
However, when I tried to get into download/recovery mode with Power VolUp/Down these do not work. The device simply continues to normal boot mode, despite the fact I am holding Power/VolUP, Power/VolDown, Power/VolUp/Home - all combinations I tried.
Any advice how can I get it in recovery so I can wipe out everything?

Categories

Resources