I've tried rooting my device but it cant be detected by odin, I've tried change my usb cable and the odin version many times but it never connected. so what I must do? please for the guide master,
thanks
Related
Hello everyone,
I just decided to root my phone and found guides for doing so (and I'm very thankful for those!).
My problem is, that Odin won't recognize my phone, if i connect it after odin is already started
However, if i have my phone in download mode, connect it to my computer and THEN open odin it's recognized just fine.
Any ideas what could cause the problem? And is it even a problem or can i just proceed?
Its the same if i try to connect when not in download mode, odin will only recognize my phone, if i have it connected before odin is started
I have a Note 2 (N7100) on Android 4.1.2
Thanks a lot!
No problems this way.
You can go on with further process.
Try to reinstall correct USB drivers
I just proceeded anyways, meaning connecting the phone in download mode to the PC and then opening odin and it all worked out
thank you for the help!
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
can you still get to download mode?
if so just re-download the firmware and flash with odin
ermmanuel said:
can you still get to download mode?
if so just re-download the firmware and flash with odin
Click to expand...
Click to collapse
the message that said to conect via pc using kies it is downloada mode i tried going to odin again but odin cant detect
woahhh
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
ikhsaricky said:
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
Click to expand...
Click to collapse
can i have your pit file in your SM-T210?
As long as it can enter recovery mode and can be recognized, do a STOCK ROM FLASH (USE THE CLEAN METHOD OF FLASHING). Now attempt to do that flash again..
An image/screenshot of the problem might help us to help you.
aaronjasper49 said:
can i have your pit file in your SM-T210?
Click to expand...
Click to collapse
Aw, im using smt311, but flashing with odinnis the simole way,, did yiu finish it?
same thing happened to my t217s when Samsung didn't do anything for a legit issue with my tablet during an OTA update and stated that it was rooted (it has been stock since out of the box). after many attempts (didn't have another computer available) i switched to a different usb port and got it flashed just fine.
hi can i ask something it happened i flash samsung j1 then suddenly in 90percent was cut and i cant go back to download mode. and the phone turn black and cant connect to pc. Can Please can you help me?
I had a similar situation with a Galaxy SM-T113 here in Canada. I was hammering away at it for about 4 days with no luck. All i got was the "use Kies" to fix it message. Kies would not detect my phone though. Anyway what i did that worked was in part already tried earlier.. I already tried for example using a different cable and a different port. And i always got a failure with Odin and attempting the stock firmware flash.
So what did i do ?
I unplugged my Gamepad i keep plugged in 24/7 thinking maybe i had too many USB devices hogging USB port bandwidth.. maybe that was it I don't know.. I also uninstalled Kies but this time i said yes to installing the unified driver it asks you about. I also changed to yet another USB port.
It was working fine before hand.
I was trying to flash the firmware simply to reset the thing like i have done on countless other devices over the years.
I am not new to this sort of thing and was rather surprised to see Odin fail.
So who knows maybe my post here will help others.
I feel relieved i did not brick a perfectly good device. LOL
I have been trying to root my new Galaxy Tab Pro 12.2 with T900UEUANK1 build with no success. I have tried Odin 3.07 and 3.09. It always stops at the first step in Odin and eventually fails. I have tried several cables, port, laptops, etc. Any advice?
Got It
FossonEng said:
I have been trying to root my new Galaxy Tab Pro 12.2 with T900UEUANK1 build with no success. I have tried Odin 3.07 and 3.09. It always stops at the first step in Odin and eventually fails. I have tried several cables, port, laptops, etc. Any advice?
Click to expand...
Click to collapse
I uninstalled the drivers and reinstalled and everything worked.
FossonEng said:
I have been trying to root my new Galaxy Tab Pro 12.2 with T900UEUANK1 build with no success. I have tried Odin 3.07 and 3.09. It always stops at the first step in Odin and eventually fails. I have tried several cables, port, laptops, etc. Any advice?
Click to expand...
Click to collapse
i used this tutorial
and the root worked fine, but it didint work for the recovery, had to do this steps
and also maybe you need to update/install busybox
Hello I am new here, and also a noob in rooting, I recently rooted my Note 3 N900T on 5.0 it was all working good but I didnt had a recovery so I decided to install Rom manager and installed a recovery and clicked boot into recovery after that I got a bootloop so I flashed a stock firmware from Odin and then it failed after that My device is showing "Firmware Upgrade encounter connect to Kies", but now when I connect to the PC is says Usb device not recognized, I tried uninstalling both Kies and usb drivers and reinstalling still no good,
Please Help!!
Thank You
The device opens up in Download mode but doesn't get recognized by pc tried 3 different pcs, 4 different cables
Whoever helped and it worked I promise I will paypal 50$ to you
Follow this guide and you should be okay, now that you've fixed your phone you head over to GalaxyNote3Root.com and read everything relevant to rooting before you try again.
+ If you **** up beyond all repair you can even send it to this guy and he'll fix it. As long as you pay the shipping.
you need Odin 3.11 and the recovery image for the phone, I'd personally use TWRP
Hey there everyone.
I tried flashing the stock ROM with a patched Magisk image.
However I cannot seem to flash the image. ODIN gets stuck on "system.img" ...
F. Reset time is ticked in ODIN.
My phone is just softlocked, I can reboot into Download mode.
But when I start the phone, it tells me that "something went wrong during the firmware upgrade" and to install "samsung smart switch", however that software cannot detect my phone and reflash.
Phone is connected with the stock USB C cable, I also tried a different cable.
I am currently downloading all the tools and redownload firmware with SamFirm 0.3.6 (I know it's deprecated, but it's the fastest and seems to work) to a different PC (Surface Go) and try to flash with that PC, maybe my current laptop is broken (Dell G3).
Are there other things that I can try?
Some information:
Note 10 plus SM-N975F , Exynos international version
Original country code DBT
PDA N975FXXU1ASHE
CSC N975FOXM1ASHE
Odin 3.13.1 & 3.13.1_3b
Screenshot & phone image:
https://imgur.com/a/vCZWmy7
Thanks!
Update:
I switched from my Dell G3 to a Surface Go, and on the surface go ODIN works!
I flashed the stock ROM and am now trying to re-flash with Magisk installed.
Hey there! I've check some of the models of your G3 Dell comes with Thunderbolt while others don't you might want to recheck the ports that you tried? What happen to me was similar. I tried many different USB C cables but nothing work until i tried a different port on the side which then work. After setting everything up I was still not satisfied with the back port not working so I switched on my flashlight only to realised that it was a THUNDERBOLT PORT and not a USB C PORT although they both can fit into the same port but they don't really do the same especially when you have a USB C cable plug into a Thunderbolt port. Might wanna check it out!
JayanWarden said:
Hey there everyone.
I tried flashing the stock ROM with a patched Magisk image.
However I cannot seem to flash the image. ODIN gets stuck on "system.img" ...
F. Reset time is ticked in ODIN.
My phone is just softlocked, I can reboot into Download mode.
But when I start the phone, it tells me that "something went wrong during the firmware upgrade" and to install "samsung smart switch", however that software cannot detect my phone and reflash.
Phone is connected with the stock USB C cable, I also tried a different cable.
I am currently downloading all the tools and redownload firmware with SamFirm 0.3.6 (I know it's deprecated, but it's the fastest and seems to work) to a different PC (Surface Go) and try to flash with that PC, maybe my current laptop is broken (Dell G3).
Are there other things that I can try?
Some information:
Note 10 plus SM-N975F , Exynos international version
Original country code DBT
PDA N975FXXU1ASHE
CSC N975FOXM1ASHE
Odin 3.13.1 & 3.13.1_3b
Screenshot & phone image:
https://imgur.com/a/vCZWmy7
Thanks!
Click to expand...
Click to collapse
Question im having a some what similar issue got stuck on system I unplugged it and restarted it just to be stuck on a connect to smart switch screen ..now I can't turn it off only can restart it so that means no recovery mode, how did you restart it back to recovery mode ?