The past couple of weeks I have had several situations where the tablet suddenly became unresponsive to the touch screen. In one case it was just the right half of the screen that didn't function anymore. Button presses stil work, the S-Pen still works, external keyboard/mouse work, it is just the touch screen that is unresponsive.
A reboot solves it so I'm pretty sure it is a software problem.
I could very well be the case that this was introduced with the latest (November 1) OTA update.
Anyone else seen similar behaviour?
Not from my side at least.
Related
Hi All,
I am using an IMATE Pocket PC 2003 since the last 6-8 months. Over the last few weeks I am facing a problem with the Touch Screen. ALl of a sudden the Touch Screen fails to respond although the buttons are still working.
Sometimes after several reboots, the Touch Screen responds sometimes it doesn't. Sometimes I just keep it IDLE for 2-3 Hours and the Touch Screen starts responding. There is no fixed time of the error also the error is random. Sometimes everything is normal for one week and there is no problem at all. Sometimes the problem persists continously.
I have Hard Resetted it atleast 4 times but the status still remains the same.
If anybody has experienced this, do share your thoughts.
Regards
Jinesh
I read somewhere that if you re-align your screen it may help.
Do your hardware buttons still work? You could try mapping tpenable.exe to a hardware button and select this when the screen locks up.
Touch screen problem
Jinesh,
did you ever manage to fix this?? This is exactly the problem I've been having on my MDA Compact (Magician) for ages: screen unresponsive, buttons still working. I started a thread on this topic as well and got some suggestions, but never managed to sort it out. I'm a bit wary to resort to flashing a new ROM or something like that since it seems to open up a whole new set of potential problems and will cost me my warranty with T-Mobile at the least (Not that they're much help, but still)...
Thanx,
Joost
Maybe the cover
The Qtek9090-screen is sometimes locked (e.g. when it's in a car holder which causes too much pressure on both sides of the display.) The same happens sometimes without any cause - pressing on both sides unlocks the screen.
Hi,
I am using an O2 Mini now and have sold off that Imate. But what I came to know that the touch screen problem was due to the irregularities in the network. The screen stops responding fast when network is weak and the device keeps on searching the network.
I have faced this problem once or twice in my O2 mini also.
Regards
Jinesh, I don't know if you checked out my thread on this, but indeed this is the conclusion I've reached: bad network causes the unresponsive screen. I think it might have something to do with the priority windows gives to the screen routine compared to (searching for) network. As of yet I have been unable to find a way to increase priority for the screen or lower it for network, though I browsed through the registry pretty extensively. Suggestions from anyone on this would be most welcome.
If started reading comics on my nexus 7 2013 32Gb with perfect viewer recently. And twice today after reading for an extended time (over an hour)the touch Screen stopped responding. Everything else seemed to work but not the touch screen. Holding down the power button and rebooting has it working again.
Anyone else have this issue or should I send it in for repair?
I'm still all factory.
Is this the same? http://forum.xda-developers.com/showthread.php?t=2497017&highlight=freeze
No, I don't think so
Mine stops completely has not come back after 5 minutes I have touch trace on so I can see when I touch the screen normally. It can go to lock screen and still have no input. Never happened before now even though I have used it extensively at other times. But this is the first time I've had only one program running for over an hour with minimal touch input.
I have had my Moto 360 for just over a week. For the second time the touchscreen stopped functioning. First time I resolved by turning it off (very long press hardware button) then left overnight and it was fine in the morning. Turning it off and back on again didn't help. Couldn't factory reset because no touchscreen.
Second time is now.
Does anyone else have this problem? Any clues how to resolve?
Thanks.
Edit: After left off for a while (instant off and on doesn't work) it is fine now. Anyone have any clues or better suggestions how to fix?
spanielhead said:
I have had my Moto 360 for just over a week. For the second time the touchscreen stopped functioning. First time I resolved by turning it off (very long press hardware button) then left overnight and it was fine in the morning. Turning it off and back on again didn't help. Couldn't factory reset because no touchscreen.
Second time is now.
Does anyone else have this problem? Any clues how to resolve?
Thanks.
Edit: After left off for a while (instant off and on doesn't work) it is fine now. Anyone have any clues or better suggestions how to fix?
Click to expand...
Click to collapse
Yes mine has done it two or three times since the last OTA update, nothing I did to the screen had an effect, had to reboot the watch to recover.
teslabe said:
Yes mine has done it two or three times since the last OTA update, nothing I did to the screen had an effect, had to reboot the watch to recover.
Click to expand...
Click to collapse
Mine doesn't recover immediately on a reboot but it is nice to know I'm not alone in the problem. It's better to know that you've only had this problem since the OTA. That means it can be fixed in software. Thanks.
Same here
Lost "touch" today on mine. Had the 360 for about 4 weeks and not seen the problem until now. Wasn't even sure how to turn it off until I saw "very long press" - thanks!
Turning mine back on straight away was fine so it was just a turn it off and back on thing. Frustrating, but I'm glad it's a software bug rather a touch screen fault, that would be a real pain. Hopefully, if it's a bug it will be fixed.
i think.....
I think this happens when the moto 360 is not set on your wrist
Ddoes anyone solve this issue ? My new moto 360 touch screen doesnt work at all. So i can choose any language in initial setup
This problem Occurs when no static energy is given to the case of the moto360. As soo'n as You touch The Iron ring The touch Will work. Release it and it Will stop working. Ik think The touch screen works rather like a conductive layer between the back of the watch and the screen it self in which the skin gives the energy needed to control the screen. When the back of the watch isn't connected to skin the touchscreen completely stops working.
In video you see what happens
https://youtu.be/KpQ-dqWYO6s
Mine did this too, however I broke my screen ordered a replacement and haven't had the issue since. When mine quite working if I triple pressed the power button it lock the screen then pressing the power button it would turn on and work though. Sometimes it wouldn't come right back on like it froze or something.
Sent from my Nexus 6 using Tapatalk
I've been having this problem too, it's more like my weekend watch but last week i noticed that it wasn't responding and i thought it could be a RAM issue. I've done multiple reboots and it doesn't work.
There was only an occasion where i left it overnight till it almost drained completely and it worked again, and then it started freezing again.
Yesterday suddenly my phone just deny to work with touch screen. I try hard reset with update.zip. I try clear data with button combination. I wonder what can be the cause? Is there anyone with the same problem? I wonder if i change the touch screen what will happen? Because the screen is not broken, i didnt hit the phone. The touch stopped just when it was with screen off. I hit the power button to wake it up, and then cant swipe.
Yes unfotunately mine as well. It happened 1 year ago, touchscreen used to work randomly. So I sent it back to China, but it was working perfectly.
After getting it back it worked for 1 month, and since impossible to do anything. Without touchscreen no TWRP, no backup possible, no flash.
It's a brick now and it is no guaranteed anymore. I lost my money my time and my nerves.
So sorry for you but I don't think you'll manage to fix it. I think it's an hardware issue.
You can try use OTG cable and a mouse.
Mine touchscreen have an row in the middle, with about 1 centimeter that don't recognize the touch, all the rest work perfect. With a mouse, work all.
Mine stopped working one morning. I left the phone on the bedside table and the next morning the touch screen didn’t work..that’s all…the screen is fine, I didn’t have any accident with it...
It was 4 months ago.. I tried everything I could to revive the phone, but I couldn’t.. so I bought a new phone, from different brand obviously
Good luck with yours!
Hi all,
I've recently got this tablet from Google store (and out of stock now).
After installed all things needed, a serious problem has appeared during in use. Its screen unexpectly trembles, pops notification out, runs and closes apps randomly then unable touchscreen at all. These make me crazy even in screen saver, and power button doesn't work sometimes to stop those happenings.
The device hasn't rooted and staying as 'pure' with only afew apps, so I've done erasing system cache partition on recovery mode and factory reset twice to solve this problem.
Nothing happened so far since reset the device but is still unsettling.. and now I just supposed touching screen badly (with sweaty fingers for example) or the screen protect film I affixed since unboxing might cause the problem.
Does anyone faces a problem like this?
Regards,
Allen
If it was greasy fingers my tablet would be completely unusable. Luckily a quick clean sorts any issues that causes.
My first suspicion would be the screen protector, as mine has done similar when there was something touching the screen. Maybe try taking it off and seeing how it goes? You can also turn on show taps in the Developer Options to be able to see what touches the tablet is detecting when it goes mad.
Better than before
The Real Dannilion said:
If it was greasy fingers my tablet would be completely unusable. Luckily a quick clean sorts any issues that causes.
My first suspicion would be the screen protector, as mine has done similar when there was something touching the screen. Maybe try taking it off and seeing how it goes? You can also turn on show taps in the Developer Options to be able to see what touches the tablet is detecting when it goes mad.
Click to expand...
Click to collapse
Thanks for your reply. Now I've used a BT mouse to match with mine and less touch on the screen apparently. Nothing happened so far.
It's not a problem of hardware I supposed and pretty sure that the screen protector interferes a certain touch as you commented. Still my eyes are keeping on what caused the problem.