Related
I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....
Did you buy the phone second hand or did you try to flash TWRP yourself? It shouldn't have TWRP installed by default.
Regardless, you can use TWRP to flash the latest update.
Given that you have TWRP, I'm assuming that you have an unlocked bootloader. Did you notice a warning pop up everytime you reboot your phone before? It should say something along the lines of "your device has been unlocked and can't be trusted". If not, you'll have to unlock it (it wipes your phone in the process).
If the bootloader is unlocked, you can simply download and flash the latest zip for OOS 4.0.3 in TWRP. This will update you phone and replace TWRP with the stock recovery (so you don't run into this problem again in the future when installing an OTA). If you don't intend to modify your phone in any way, then this is all you need to do, your phone should be functional.
There are plenty of threads with detailed guides on how to do all of this.
I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
sndr1384 said:
I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
Click to expand...
Click to collapse
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.
This is issue of using a faulty twrp so for that when ur phone us booting up go to fastboot and flash twrp 3.0.4-1 and everything will work
emuandco said:
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.
Click to expand...
Click to collapse
Similar Problem here:
just wanted to flash latest OOS 4.0.3, so I flashed back stock recovery with flashify and rebooted into recovery mode to flash the already downloaded OOS 4.0.3. zip. That's when it began to go poop! After rebooting it just went dark with no Chance to power it on again! No dice with power button, Volume up/down + power button, nothing! Not even the LED's are blinking when plugged in. So this one seems to be basically dead!
I got it once booting again after randomly pushing the buttons (after x minutes!?), but everytime I reboot the phone it just shuts off without beeing able to power it on again. At the Moment it's dead!
Any ideas what might happened? If I get it on again, should I immediately reset it to factory Settings?
I am kinda lost here! Any help/ideas would be much appreciated!
Flashify? Never used it and never trusted apps which flash stuff on a running system. Use fastboot and reflash the recovery partition. Link to recovery is in my former post.
fastboot flash recovery PATHTOIMGFILE
Thank you for your advice! Still a lot to learn! Got it up again, will try as you suggested!
It appeared that my stock recovery file was corrupted , but all is fine again! Thank you very much!
Mannycolon85 said:
I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....
Click to expand...
Click to collapse
I may have been the person you traded with to get the OnePlus 3, but I took the phone back and after 5 hours I got it up and running.
The phone would boot to TWRP, but even after wiping the entire system and dragging a ROM zip to the internal storage, reinstalling did nothing. It just kept booting back to recovery.
The solution entailed the following.
Download stock recovery IMG. Flashed through TWRP. Rebooted recovery and now was back to stock recovery.
Download the official OxygenOS ROM zip from the OnePlus website and changed the name to update.zip
Next I downloaded Android studio for access to ADB. I had never used ADB before, but I knew this was needed to push a file to the phone.
Needless to say, ADB kept freezing my computer when I would type in the commands to side load.
I deleted Android studio and installed a minimal ADB/Fastboot I found online. I opened my command prompt, typed the command for sideloading, and immediately got my installation starting. It took about 10 minutes to fully install. When it was finished, I rebooted and had a fully functioning OnePlus 3
Sent from my ONEPLUS A3000 using Tapatalk
SOLVED!
So, after just giving up and moving on to another project of trying to flash the ARTX Kernel which didn't work (I'll update this if I find out why it's not working; my phone restarts when im flashing the zip and "2013-2015 [somename ] amurlle.com" pops up in log.) so I researched and found a zip called MrBump.zip which bumps your boot image to get rid of the secure boot check.
How to
Flash SuperSu v2.82.zip via TWRP and then flash MrBump.zip, the phone will reboot after flashing MrBump and then another time for finishing the SuperSu installation.
History
\\
So, I have recently updated from Cyanogenmod 13 to Lineage OS 14.1 as it's faster, pretty, and Xposed was recently released for Nougat.
Installing Lineage wasn't a problem nor Gapps or the su add on package from Lineage which unlocks the OS's own su management service.
I wanted to use SuperSu as it pretty, customization, and better privilege management compared to the option lagging 'Privacy Guard' Lineage uses.
So, I flashed the SuperSu v2.82 zip which gave me a "Secure Boot Error" when rebooting into the system. No partitions seemed to be corrupted or damaged but I assumed
it had to do with the boot.img file as I saw supersu patch the boot image for some stuff I don't know. I decided to research and get my team of arduino super AI's to find
something of an answer of how to fix my problem, stumbling upon an article on XDA from chainfire of a boot image signer. I used Cywgin to create an rsa key and signed my boot image
then figuring out I could use the "BootSigner.zip" to sign the boot image without me creating a rsa key, flashing the zip nothing changed just some other error of where it couldn't read
boot image or the boot image was misdirecting to the system. I then tried fastbooting the signed boot image I made, it didn't work giving me some other ****ty error of mutiny.
I then fastbooted the orginal unsigned boot image I took from my ROM which worked but when booting into the OS SuperSu was still not the active su manager.
I then gave up and am now writing this post in a last option of getting SuperSu on my phone.
I have tried SuperSu 2.78 and kingoroot from the PC hoping that I could then use SuperSuMe
//
Details of my device
\\
LG G3 D855
ARM
Lineage OS 14.1 (20170724)
Gapps 7.1 Micro (20170728)
TWRP 3.1.1-0
//
1 second after turning on the phone the error pops up (the LG logo is visible when the log is onscreen):
ERROR : boot certification verify
[640] --------------------------------------------------
[640]
[640] Secure boot Error!
[640] Cause: boot certification verify
[640]
[640] ---------------------------------------------------
2 seconds later the screen blanks and the LED on my phone blinks blue and red at half second intervals.
Any help would be appreciated, if you need any specifics of my device or screenshots just ask (I can replicate my problems and steps iv'e done if you need me to.)
Eureka!
I did the exact same thing and all the guides that I found assumed that you still had access to the system or had already wiped out download mode. There is a lot of advice out there that really just doesn't work. Anyway, I gave up and decided to do a wipe with suprising results.
boot to stock recovery by holding power+volume down
perform factory reset
phone reboots to TWRP - WHY?!?! I have no idea, but it worked
reinstall your latest lineage image from /data/data/org.lineageos.updater/app_updates/
wipe davlik/cache + reboot
profit!
I don't know why this worked and I stumbled upon this by accident.
Mileage may vary, so please share your results.
XtatX said:
I did the exact same thing and all the guides that I found assumed that you still had access to the system or had already wiped out download mode. There is a lot of advice out there that really just doesn't work. Anyway, I gave up and decided to do a wipe with suprising results.
boot to stock recovery by holding power+volume down
perform factory reset
phone reboots to TWRP - WHY?!?! I have no idea, but it worked
reinstall your latest lineage image from /data/data/org.lineageos.updater/app_updates/
wipe davlik/cache + reboot
profit!
I don't know why this worked and I stumbled upon this by accident.
Mileage may vary, so please share your results.
Click to expand...
Click to collapse
What?
You must've flashed TWRP before, and I don't understand what you mean here. Did you brick your phone trying to flash SuperSu too?
But i'm glad it worked out for you
Bump!
Saterlite said:
What?
You must've flashed TWRP before, and I don't understand what you mean here. Did you brick your phone trying to flash SuperSu too?
But i'm glad it worked out for you
Click to expand...
Click to collapse
Yeah, I had TWRP on it before and got to that point by trying to flash SuperSU on an already installed copy of Lineage. I was really trying to revert to stock and start over when TWRP came up.
Hey guys,
So I've been trying for days to get a custom Ron installed on N975F.
Right now I'm on completely reflashed stock Rom. With stock recovery et al. No root.
I am able to flash Magisk with Odin. No trouble. And my phone continues as usual without issue.
However, once I install TWRP, no matter where or how I install it, once I restart my phone it will boot past the warnings without issue, then go to the screen that just says "SAMSUNG" and the phone will never actually boot up.
I can still boot into TWRP recovery without issue, but system itself will never boot, it will just sit on the "SAMSUNG" screen forever.
In fact, it seems like as long as TWRP is installed to recovery, my system will never boot with any Rom. It can be fixed by reinstalling stock recovery, or by reflashing stock in it's entirety (which I have now done before I try again).
Has anyone got any ideas why this might be occurring or how I can address it? I saw some threads about 'rollback protection' but it seems like that is for people who are not even able to boot into TWRP, or get stuck on the first "Samsung Note 10+", screen rather than the system booting "SAMSUNG" screen.
KiwiNote+ said:
Hey guys,
So I've been trying for days to get a custom Ron installed on N975F.
Right now I'm on completely reflashed stock Rom. With stock recovery et al. No root.
I am able to flash Magisk with Odin. No trouble. And my phone continues as usual without issue.
However, once I install TWRP, no matter where or how I install it, once I restart my phone it will boot past the warnings without issue, then go to the screen that just says "SAMSUNG" and the phone will never actually boot up.
I can still boot into TWRP recovery without issue, but system itself will never boot, it will just sit on the "SAMSUNG" screen forever.
In fact, it seems like as long as TWRP is installed to recovery, my system will never boot with any Rom. It can be fixed by reinstalling stock recovery, or by reflashing stock in it's entirety (which I have now done before I try again).
Has anyone got any ideas why this might be occurring or how I can address it? I saw some threads about 'rollback protection' but it seems like that is for people who are not even able to boot into TWRP, or get stuck on the first "Samsung Note 10+", screen rather than the system booting "SAMSUNG" screen.
Click to expand...
Click to collapse
i am guessing try ADB commands see this link! https://www.koskila.net/how-to-use-twrp-to-flash-an-android-device-that-refuses-to-boot-to-twrp/
Many N975 users have reported this issue and I have forwarded concerned to ian as well. What I believe is formatting on latest (last few) twrp causing issue.
If you have N975/N976 then, visit xda My rom thread - Download area - you will find a folder "for stock rom & bootlooped device" download instructions and follow it, I have wrote guide with or without flashing my rom
Edit :
here is direct link, you will find all required file
https://www.mediafire.com/#0urfw8g1gx630
This guide is stop solution to root/root with twrp/fix Samsung roll back bootloop everything. And yes you don't needs to patch anything yourself, all files available are ready to use
Hi Dr Ketan,
Thanks for the response.
I actually solved the issue simply by using the version of TWRP and following the install instructions on your basic "How to Root and Install TWRP" for Note 10+ guide.
So I think this is a problem relating to Ian's latest TWRP. TWRP linked from your thread
is working fine (but leads to issue with Camera in GSI/Lineage OS ROMs).
I will have a look at your special guide relating to Samsung logo/rollback stuff and see if it will allow me to install latest TWRP from Ian and bypass these issues! Thank you.
KiwiNote+ said:
Hi Dr Ketan,
Thanks for the response.
I actually solved the issue simply by using the version of TWRP and following the install instructions on your basic "How to Root and Install TWRP" for Note 10+ guide.
So I think this is a problem relating to Ian's latest TWRP. TWRP linked from your thread
is working fine (but leads to issue with Camera in GSI/Lineage OS ROMs).
I will have a look at your special guide relating to Samsung logo/rollback stuff and see if it will allow me to install latest TWRP from Ian and bypass these issues! Thank you.
Click to expand...
Click to collapse
Yes, As I said issue is related to newer TWRP only. If you use old TWRP, camera will not work. My above link guide is for latest base and you can get latest TWRP only (Included package are having latest available TWRP & Kernel)
Hi everyone
After some research, I can't find a succeful way to install TWRP recovery instead of Lineage stock recovery.
It's really embarasing because I'm currently setting up my brand new XZ2c compact to run the way I want it to on Lineage OS 17.1 with Magisk and Xposed modules, and I experienced 3 or 4 endless bootloop that led me to fully format my phone after bunch of hours setting it and tailoring it up... Huge waste of time, frustration overload, as you could expect. So, I really miss tremendous TWRP backup fonctionnality I used to run frequently on my old Z5c... :crying:
Does anyone here as figured out how to replace Lineage stock recovery on this device? Is so, I'd really to hear him out
Have a good week-end!
tomboudiboudi said:
Hi everyone
After some research, I can't find a succeful way to install TWRP recovery instead of Lineage stock recovery.
It's really embarasing because I'm currently setting up my brand new XZ2c compact to run the way I want it to on Lineage OS 17.1 with Magisk and Xposed modules, and I experienced 3 or 4 endless bootloop that led me to fully format my phone after bunch of hours setting it and tailoring it up... Huge waste of time, frustration overload, as you could expect. So, I really miss tremendous TWRP backup fonctionnality I used to run frequently on my old Z5c... :crying:
Does anyone here as figured out how to replace Lineage stock recovery on this device? Is so, I'd really to hear him out
Have a good week-end!
Click to expand...
Click to collapse
You don't install a recovery, but only temporally boot one
https://wiki.lineageos.org/devices/xz2c/install
kurtn said:
You don't install a recovery, but only temporally boot one
https://wiki.lineageos.org/devices/xz2c/install
Click to expand...
Click to collapse
Thanks for replying!
Ok, but if I want this recovery bootable permently away from my computer?
kurtn said:
You don't install a recovery, but only temporally boot one
https://wiki.lineageos.org/devices/xz2c/install
Click to expand...
Click to collapse
Thanks for your (minimalist) advice. Literally just lost 1 hour fixing the bootloop it just caused by following it, I'm delighted.
Behind my post, I was hoping to find someone who could explain a bit more the process of replacing/flashing/booting/(wateveryouwanti'mnotanexpert) a recovery, and at the same time avoiding me wasting more hours in bootlooping/formating/reinstalling. Hopefully, this time I succeed to came out of the bootloop without formating and reseting eveything, but I almost lost my nerves.
All of this is a bit cloudy for me, could you (or someone else that would give me a little of his time to) be pedagogue and explain clearly the whole proccess (and especially what you should avoid if you don't want to get stuck in a bootloop/getting scarying corrupted device message) ?
No one?
tomboudiboudi said:
No one?
Click to expand...
Click to collapse
Wrong forum. Search in you device section.
Hi guys!
Today I tried again to install TWRP on my Sonyh Xperia XZ2C because LineageOS Recovery doesn't provide Nandroid backup, which is a shame.
I tried many ways described over the web, none of those worked, and I ended up with a boot loop at startup with that naughty message "your device is corrupted it cannot be trusted and will not boot". I can't boot to Lineage, neither to recovery. I'm stuck.
With device turned off, I can eventually press volume down, plug it to computer, access fastboot mode (blue led), flash+boot the LineageOSrecovery.img, then the device restart, Sony logo appears... and that's all, I'm stuck with logo in boot loop, and I can't go anywhere further.
I tried to change boot slot (without knowing if it could help with this problem at all) but I alway get "unknown option".
I'm panicking right now, I can't find any way out to this bootloop, if someone could help it will be sooo appreciated!
I tried hard to find a solution for 4 hours now, I'm completly stuck and I can't even sleep. That's why I finally reached out here.
tomboudiboudi said:
Hi guys!
Today I tried again to install TWRP on my Sonyh Xperia XZ2C because LineageOS Recovery doesn't provide Nandroid backup, which is a shame.
I tried many ways described over the web, none of those worked, and I ended up with a boot loop at startup with that naughty message "your device is corrupted it cannot be trusted and will not boot". I can't boot to Lineage, neither to recovery. I'm stuck.
With device turned off, I can eventually press volume down, plug it to computer, access fastboot mode (blue led), flash+boot the LineageOSrecovery.img, then the device restart, Sony logo appears... and that's all, I'm stuck with logo in boot loop, and I can't go anywhere further.
I tried to change boot slot (without knowing if it could help with this problem at all) but I alway get "unknown option".
I'm panicking right now, I can't find any way out to this bootloop, if someone could help it will be sooo appreciated!
I tried hard to find a solution for 4 hours now, I'm completly stuck and I can't even sleep. That's why I finally reached out here.
Click to expand...
Click to collapse
In fastboot mode you should be able to flash stock rom
Is there any way to make the device boot on the Lineage partition without wiping everything?
For an unknown reason, I succed to boot on Lineage Recovery (not TWRP) this morning. I flashed LineageOs rom.zip using adb sideload. After rebooting, the recovery tolds me that I had to wipe everything because the system partition seems to be corrupted, so I did.
I'm a bit tired to lost everything since I made all of this to do Nandroid backups with TWRP........ but I have a fresh new install, my phone works again so it's fine.
But I still need to make Nandroid backups.
Kurtn, you seem to have skills and knowledge. As you can see, I didn't succeed to boot Twrp since october 2020. I don't see why it would be impossible with my device, I'm probably messing something somewhere.
Would you share your knowledge and help me booting/flashing TWRP without bricking everything again?
Could you make an answer instead of a single smiley?
tomboudiboudi said:
Could you make an answer instead of a single smiley?
Click to expand...
Click to collapse
Sorry, i cant. I don't backup and I don't have an a/b device.
Ok, thanks anyway!
tomboudiboudi said:
I didn't succeed to boot Twrp since october 2020. I don't see why it would be impossible with my device, I'm probably messing something somewhere.
Would you share your knowledge and help me booting/flashing TWRP without bricking everything again?
Click to expand...
Click to collapse
Btw.
Code:
fastboot flash boot recovery.img
DOES install the recovery, since it's permanently flashed. Don't know why they (lineage) didn't change that.
kurtn said:
You don't install a recovery, but only temporally boot one
https://wiki.lineageos.org/devices/xz2c/install
Click to expand...
Click to collapse
However @tomboudiboudi , you could boot twrp manually using
Code:
fastboot boot twrp.img
With that, twrp should appear and ask for a password to decrypt your userdata partition.
If that works, you could try to flash boot this very same twrp.img. Maybe you need an additional twrp.zip too which will be sideloaded within twrp itself.
A note for you which might help: I wanted to update my lineage recovery manually using fastboot (older lineage recovery to newer one) and found that nothing (except fastboot) was booting at all after flashing this.
However, after dirty flashing lineageOS.zip, everything worked fine again.
Keep in mind that flashing a recovery will modify your boot.img. If this one doesn't work / is corrupt etc., your os won't boot up.
User699 said:
Btw.
Code:
fastboot flash boot recovery.img
DOES install the recovery, since it's permanently flashed. Don't know why they (lineage) didn't change that.
However @tomboudiboudi , you could boot twrp manually using
Code:
fastboot boot twrp.img
With that, twrp should appear and ask for a password to decrypt your userdata partition.
If that works, you could try to flash boot this very same twrp.img. Maybe you need an additional twrp.zip too which will be sideloaded within twrp itself.
A note for you which might help: I wanted to update my lineage recovery manually using fastboot (older lineage recovery to newer one) and found that nothing (except fastboot) was booting at all after flashing this.
However, after dirty flashing lineageOS.zip, everything worked fine again.
Keep in mind that flashing a recovery will modify your boot.img. If this one doesn't work / is corrupt etc., your os won't boot up.
Click to expand...
Click to collapse
I fear you still haven't realized, what a/b means. The classic concept of having a recovery partition, where you can boot twrp at any time - doesn't apply.
kurtn said:
I fear you still haven't realized, what a/b means. The classic concept of having a recovery partition, where you can boot twrp at any time - doesn't apply.
Click to expand...
Click to collapse
You're right, there is no recovery partition.
As I said: Flashing a recovery.img will modify the boot.img.
Please need urgent help. I had unlocked bootloader. While trying to update Magisk, my phone rebooted and got stuck on fastboot loop. Then while trying to flash TWRP using fastboot this "Your device is corrupted and cannot be trusted" error occured. I can't go into recovery, it just loops into this message. And my PC can't recognise the phone now at all. Please I need help. I have been trying to resolve this issue for hours now.
This is for Google Pixel 2 XL.
SonyXperiaSP said:
Please need urgent help. I had unlocked bootloader. While trying to update Magisk, my phone rebooted and got stuck on fastboot loop. Then while trying to flash TWRP using fastboot this "Your device is corrupted and cannot be trusted" error occured. I can't go into recovery, it just loops into this message. And my PC can't recognise the phone now at all. Please I need help. I have been trying to resolve this issue for hours now.
Click to expand...
Click to collapse
As long as you can get into the bootloader you're not dead in the water. Download the last factory image - NOT OTA image - from Google and flash it while in bootloader mode using ADB and Fastboot. That will return your device to its factory state. From there you can boot - NOT install - TWRP and install a custom ROM as well as root.
Strephon Alkhalikoi said:
As long as you can get into the bootloader you're not dead in the water. Download the last factory image - NOT OTA image - from Google and flash it while in bootloader mode using ADB and Fastboot. That will return your device to its factory state. From there you can boot - NOT install - TWRP and install a custom ROM as well as root.
Click to expand...
Click to collapse
First of all thank you for the reply. I don't know but I left the phone alone for couple of hours and right before seeing your post got into bootloader by pressing volume down and power key. Tried to flash TWRP and as soon as it flashed I got the exact same error like last time. I will now be following your method and install factory image. "NOT install - TWRP and Install a custom ROM", so I will not be installing TWRP this time.
I will post updates on what goes and hopefully will be able to flash the factory image without errors.
Thank you very much for the help Strephon. Really, really appreciate it. I am now able to boot into the OS and hopefully installing custom rom or rooting afterwards won't be an issue, Again, thank you very much.