Good day phone-mates!
Need help, somehow I've broken efs on my n8.1-ta1121, could you advice me how to turn HS-USB DIAGNOSTICS com port, or anything else to repair my efs.. I've tried allready *#*#717717#*#* , other combinations, nothing works.. tried to accses to efs via edl.. nothing works..
Regards
Related
I have TOT files, I have BoardDiag (different versions), but when I follow the countless instructions online I always get "Device was not found in dload trying flash programmer.".
Where do I go from here?
Bro how are conecting your phone ..
If it is like ...
1: you installed the drivees for qualcome qhs bulk ..
2: device when conected now show under device manager as Qualcomm HS-USB QDLoader 9008
3:if above two are effermative tell me !! If not thwn again tell me...???
Check ure ports in d3vice manager
bravo2526 said:
Bro how are conecting your phone ..
If it is like ...
1: you installed the drivees for qualcome qhs bulk ..
2: device when conected now show under device manager as Qualcomm HS-USB QDLoader 9008
3:if above two are effermative tell me !! If not thwn again tell me...������
Click to expand...
Click to collapse
This is correct. I reinstalled the qualcomm driver, now it is COM3 and boarddiag from here works (http://open-freax.fr/guide-unbrick-your-lg-g3/), but emmc test fails.
"Failed to open partition from EMMC." It doesn't matter if I select Read/Write or Erase.
By the way, I didn't have to open my phone for the 9008 mode, it went there kind of on its own.
Quza said:
This is correct. I reinstalled the qualcomm driver, now it is COM3 and boarddiag from here works (http://open-freax.fr/guide-unbrick-your-lg-g3/), but emmc test fails.
"Failed to open partition from EMMC." It doesn't matter if I select Read/Write or Erase.
By the way, I didn't have to open my phone for the 9008 mode, it went there kind of on its own.
Click to expand...
Click to collapse
Bad news if emmc fails ..i supose its a hardware damage to your emmc chip ...
What was you trying when it happend ..?
Power outage during rom installation ??
During KDC flash it stopped working. After 15 minutes at 0% I restarted the phone.
Hi,
From nothing my S4 mini stop working, but because i have some exp from old times i check if my computer recognize, and it appears Qualcomm HS-USB QDloader 9008 (After i install QUSB drivers). But the phone not enter in download mode or recovery mode, i tried many ways and look for all treads in the forum about that and nothing. Hope someone have any other idea.
Ps.: Already tried the card from debrick.img
azzurra01 said:
Hi,
From nothing my S4 mini stop working, but because i have some exp from old times i check if my computer recognize, and it appears Qualcomm HS-USB QDloader 9008 (After i install QUSB drivers). But the phone not enter in download mode or recovery mode, i tried many ways and look for all treads in the forum about that and nothing. Hope someone have any other idea.
Ps.: Already tried the card from debrick.img
Click to expand...
Click to collapse
Debrick image should bring it partially to life, how did you prepare for the sd card? Which debrick image did you use?
I wanted to port MIUI on the Robin, found Xiaomi mi4c, which were good enough to port miui from. downloaded, edited boot, and pushed to phone. then i flashed it, clicked "reboot to system" and then it turnes off. It is not reacting on buttons or that sort of thing. When i connected to pc i had qhsusb.. but after flashing drivers it is qualcomm hs-usb dloader 9008 (COM9). I found nothing about unbricking, not found needed files for QFIL unbrick? Please help with smth
Hi All,
Is there any way to recover the phone from the Quectel QDloader 9008 COM mode ? Screen not coming up, no adb or fastboot mode, the only think I see in the Windows Device Manger is that the phone is connected as COM Port.
Thx for any advice.
Have the same issue - were you able to figure out how to fix it?
The only way to fix it would be to have a copy of the ROM that can be flashed in EDL mode, which is the mode your device is in. Google doesn't make EDL-flashable copies of its ROMs available - not a surprise - since that mode is mainly for tech support personnel. I'm afraid your only recourse is to contact Google and see what they can do for you.
freshmike said:
Hi All,
Is there any way to recover the phone from the Quectel QDloader 9008 COM mode ? Screen not coming up, no adb or fastboot mode, the only think I see in the Windows Device Manger is that the phone is connected as COM Port.
Thx for any advice.
Click to expand...
Click to collapse
Phone should still be covered under manufacturer's warranty if anything call it in see you at the phone shut off and did that and they'll replace it
@freshmike what did you do to get to this state?
davidcie said:
@freshmike what did you do to get to this state?
Click to expand...
Click to collapse
No idea, not mine got it from a friend to try to fix. I think the memory is grilled. On the other hand there are so many complains regarding the quality of Pixel phones, I would not want one even as a gift
try it !
Upgrade:
I need some files to run QFIL:
prog_emmc_firehose_8996.mbn (.elf)
rawprogram0.xml
patch0.xml
https://forum.xda-developers.com/ha...e-progemmcfirehose8996-mbn-elf-qfil-t3867750/
---------------------
Brick black screen Qualcomm HS-USB QDLoader 9008 (COM20). I need help please
Please, I need a lot of help. I will give you all the details I can.
I have always used the following ROM:
G891AUCS2API2_CL8737252_QB10881022_REV02_user_low_ship_MULTI_CERT
I have never had problems with this ROM. I wanted to try the AT & T ROM pirmera (it's an official ROM) and I installed it with modified Odin3 3.12. I have always used this Odin without problem. The ROM that has generated the problem is this:
SM-G891A_G891AUCU1APG7_ATT_Full_Repair_Frimware
I installed it with the same options as ROM REV02, so the problem is not Odin's. I think the problem is having downloaded Android version.
When I installed the ATT_Full_Repair_Frimware ROM, Odin said there was success. However, the phone did not turn on.
I tried to charge the phone, without success. Neither does any combination of buttons work.
When I connected the mobile to the computer, a driver was installed:
Qualcomm HS-USB QDLoader 9008 (COM20)
I also think that I read something from QFIL.
This is the only thing I have achieved. Odin does not work in this mode. I'm finding some weird Internet programs:
qpst.win_.2.7_installer_00472.4
Qualcomm Premium Tool V2.4 cracked + WORKING KEYGEN
This is a very difficult case for me and the people in my group of computer friends do not have the ability to solve this problem either. Only XDA can help me.
@NotSoMiniGun, please.
@Slade8525, please.
@activefan01, please.