The lg g710ulm phone stuck on fastboot after update failure. The phone can't enter download mode, it just boot to fastboot mode when it is power on. Please, I need emmc firehorse loader to flash laf.img through edl mode or if anybody knows other unbricking method that I can use ; your suggestions is needed.
Sent from my HUAWEI TAG-TL00 using Tapatalk
I had a sort of similar issue while unlocking my bootloader today. I got to the part where you flash the A and B slots with the patched image, and upon reboot, both slots were seemingly unbootable. The way I got around it was to go into fastboot and boot the pre-rooted ULM image. (I can link it if you don't already have it.) That allowed me to boot all the way into Android. Not sure if it would work the same for your situation, but worth a shot since you're already in fastboot.
rhythm_dx said:
I had a sort of similar issue while unlocking my bootloader today. I got to the part where you flash the A and B slots with the patched image, and upon reboot, both slots were seemingly unbootable. The way I got around it was to go into fastboot and boot the pre-rooted ULM image. (I can link it if you don't already have it.) That allowed me to boot all the way into Android. Not sure if it would work the same for your situation, but worth a shot since you're already in fastboot.
Click to expand...
Click to collapse
Thanks for your reply, my own case is different because I can't access download mode talk less of Android menu. The phone only boot to fastboot mode (the fastboot is locked)
Sent from my HUAWEI TAG-TL00 using Tapatalk
Thanks for sharing but getting the phone emmc firehorse loader is the problem.
Sent from my HUAWEI TAG-TL00 using Tapatalk
Hello @aaya888 -- My G7 is stuck on the fastboot screen. Can you help me with fixing it so I can flash stock kdz again? I bought a G7ULM online, but turns out to be a Sprint phone that was cross flashed. It was not getting OTA updates. I tried flashing Pie on it using LGUP, but it errored at 74% and now my phone stuck on fastboot screen. I've tried some of the other methods found online, but so far no success. I was wondering if you could help guide me through fixing my phone with QFIL. I want to flash an unlocked stock Pie (like GFI unlocked) that will work on t-mobile with all bands.
If you can help out in any way, I would greatly appreciate it. Thanks.
Try using LG Bridge to restore your phone using "Update error recovery" link under the Software Update tab. First though you do have to get into download mode for this to work. Hold down your volume up button while the phone is plugged into your PC via usb cable.
Related
Noob here:
Not sure what to do in this situation.
Flashing went wrong at some point.
At this point the phone does not get past the Google logo.
fastboot or adb do not recognize the unit.
When starting in recovery mode. The unit does appear in the device manager.
How do I unbrick the thing?
Boot into the bootloader. (Hold down both volume keys and power). Then flash the stock Google images.
Sent from my Galaxy Nexus using xda premium
dmt0 said:
Noob here:
Not sure what to do in this situation.
Flashing went wrong at some point.
At this point the phone does not get past the Google logo.
fastboot or adb do not recognize the unit.
When starting in recovery mode. The unit does appear in the device manager.
How do I unbrick the thing?
Click to expand...
Click to collapse
Use this tool to flash stock ROM from fastboot: http://forum.xda-developers.com/showthread.php?t=1400871
Thanks for quick reply.
Noticed an error in recovery mode: "Fastboot Command Read Error -2147483647"
Which was an easily googleable item, from there on all was clear. Got my stock yakju rom installed and getting a JB update offered!
I want to ask that it hasn't any solutions yet??
I have flash Genisys Rom 2.6.zip than reboot that have a bootloop problem....
Will it be a solutions then?
Any idea??
Have you flashed v20a bootloader and modem images?
mirko93s said:
Have you flashed v20a bootloader and modem images?
Click to expand...
Click to collapse
Yes I flash it back those v20a bootloader, boot and modem after I got into the twrp, then I reboot it, it is stuck on the LG logo screen now...
and now I can't go back to the fastboot mode and the twrp...that 's the problem...
any idea to go back the twrp?
i'm stuck on same thing.
What I've tried.
! flashing back to stock rom using lg flash tool. Crashes at 9%. Tried flashing 20A file not allowed
both adb and fastboot methods don't work as adb doesn't detect phone and fastboot get's stuck on waiting on device
Basically the phone is stuck on boot logo after upgrading to marshmallow which all went fine and phone booted as normal after I then reinstalled the twrp recovery as before so to install supersu after boot that when the problem started. The phone can get into factory reset the two yes methods which I have tried still no luck and I can also get into download mode. basically am I waiting on a update to lg flash tool or have I ducked my phone any help would be appreciated
You probably ****ed the security flag added into marshmallow and it didn't like it one bit,that's why its better the flash newer versions of a rom when you have a recovery then an official ota ,that's where they get ya locked down .is there any devices in the device manager at all? Just checking if its hard bricked.if its labeled as q9xxxx something like that then its definitely hard bricked.like not even a jtag can get er back
imsopickled said:
i'm stuck on same thing.
What I've tried.
! flashing back to stock rom using lg flash tool. Crashes at 9%. Tried flashing 20A file not allowed
both adb and fastboot methods don't work as adb doesn't detect phone and fastboot get's stuck on waiting on device
Basically the phone is stuck on boot logo after upgrading to marshmallow which all went fine and phone booted as normal after I then reinstalled the twrp recovery as before so to install supersu after boot that when the problem started. The phone can get into factory reset the two yes methods which I have tried still no luck and I can also get into download mode. basically am I waiting on a update to lg flash tool or have I ducked my phone any help would be appreciated
Click to expand...
Click to collapse
Yes brother!!! The same thing as you experience.... just like the thread (LG G4 bootloop.... Need expert help... Ready to pay the price)
but there are still nothing method? So just wait for the update to lg flash tool and the fully TOT files??
O MY GOD...I've been fooled trick this time...
mr turtle droid said:
You probably ****ed the security flag added into marshmallow and it didn't like it one bit,that's why its better the flash newer versions of a rom when you have a recovery then an official ota ,that's where they get ya locked down .is there any devices in the device manager at all? Just checking if its hard bricked.if its labeled as q9xxxx something like that then its definitely hard bricked.like not even a jtag can get er back
Click to expand...
Click to collapse
No its listed as two different devices as LGE andriodnet serial port com4 and also LGE andriodnet usb modem. I have noticed that if i uninstall these two from within device manager that it then goes back to an lgmobile phone with a i on the phone icon in device manager. I have tried to find the proper driver so to make the computer see the lg phone again without error via extracting driver install exe but no joy it goes back to the above.
I wonder Is it possible to flash the .img files that are boot. system etc using lg flash tool the one with the tot methid via a script and the files I wonder. Or even convert the files needed to do a complete flash of system bootloader etc to bin files so to be read by the lg flash tool used in the tot version. or is there any other software that can convert kdz to bin.
imsopickled said:
No its listed as two different devices as LGE andriodnet serial port com4 and also LGE andriodnet usb modem. I have noticed that if i uninstall these two from within device manager that it then goes back to an lgmobile phone with a i on the phone icon in device manager. I have tried to find the proper driver so to make the computer see the lg phone again without error via extracting driver install exe but no joy it goes back to the above.
I wonder Is it possible to flash the .img files that are boot. system etc using lg flash tool the one with the tot methid via a script and the files I wonder. Or even convert the files needed to do a complete flash of system bootloader etc to bin files so to be read by the lg flash tool used in the tot version. or is there any other software that can convert kdz to bin.
Click to expand...
Click to collapse
I think this is impossible to flash the .img files that are boot. Because we cannot to go into the fastboot mode.
bardochu said:
I think this is impossible to flash the .img files that are boot. Because we cannot to go into the fastboot mode.
Click to expand...
Click to collapse
not even through adb shell????????
---------- Post added at 02:03 PM ---------- Previous post was at 02:02 PM ----------
and what you guys are experienceing is the rollback protection from lg in their boot-loaders...not sure how to get past it but i saw a thread on here to get past it
I too, like many others, am stuck in a boot loop, able to access download mode, but not recovery, i have an unlocked bootloader, but cannot get into fastboot or use adb commands.
robg2102 said:
I too, like many others, am stuck in a boot loop, able to access download mode, but not recovery, i have an unlocked bootloader, but cannot get into fastboot or use adb commands.
Click to expand...
Click to collapse
:highfive:In the same boat, XDA's brother TheBledard Who has a same trouble in the bootloop. He said that you can use the octopus box to unbrick.
But it seem a little bit expensive....:cyclops:
Same
I had the same problem. They recently reposted the download to a fixed 2.6 so try to redownload from the genesys post. Also, flash the marshmallow kernel and supersu right after, then followed by genesys theme if you choose to use.
Retry and retry to start twrp at boot with sleep button and volume down button.... I had the same problem with marshmallow because i forgot to flash v20a bootloader, and i had finally access to twrp after a lot of times...
bardochu said:
:highfive:In the same boat, XDA's brother TheBledard Who has a same trouble in the bootloop. He said that you can use the octopus box to unbrick.
But it seem a little bit expensive....:cyclops:
Click to expand...
Click to collapse
almost 200 dollar yes
Long story short, I ended up with a classic bootloop (shows boot animation continuously) from messing around with Magisk modules, so I did a wipe from recovery, still bootloop, so I tried reverting completely to stock with the OEM downloads. I tried flash_all_except_storage.bat, and flash_all.bat, but this time it was a different bootloop. The phone shows the Android One logo, the screen flickers like it's going to the boot animation, but then it just goes back to the Unlocked Bootloader Warning Screen, then the Android One logo, and loops like that. I dumbly thought locking the bootloader, reflashing everything, and starting over like it were a new phone would fix the issue, so I did flash_all_lock.bat, but now I'm just stuck with this weird bootloop and a locked bootloader. Trying to unlock the bootloader with fastboot just gives me "oem unlock is not allowed", so I'm at a loss here.
Does anyone know of anything else I could do, or is this a hard brick?
With a locked bootloader EDL flash probably is your last chance.
Maybe this thread helps:
https://forum.xda-developers.com/mi-a2-lite/help/hard-bricked-mi-a2-lite-help-to-enter-t3862648
thorin0815 said:
With a locked bootloader EDL flash probably is your last chance.
Maybe this thread helps:
https://forum.xda-developers.com/mi-a2-lite/help/hard-bricked-mi-a2-lite-help-to-enter-t3862648
Click to expand...
Click to collapse
I got stuck with a similar problem and that was the only option, to boot into EDL mode you will need to partially dissasemble your device and flash the image via fastboot or via MiFlash (download the latest version as I had problems with an older one). Since that incident I kept the bootloader unlocked just in case something happens.
I had the phone booted into EDL mode and attempted to flash the stock ROM (10.0.3.0) with MiFlash, but it errored out with an ERROR_UNSUPPORTED_TYPE. I tried with the previous version, 10.0.2.0 and it worked for some reason. That fixed it though, so thanks! I've been lightly tinkering with rooting android phones a few years now, but until encountering this issue, I'd never heard of EDL mode. You learn something new every day? ?
I have the same issue with my nephew 's mi a2 lite which has the bootloader locked.
It only shows the android one logo.
I cannot go to recovery mode, but I can go in fastboot.
Changing from "a" to "b" doesn't solve anything and being the bootloader locked is not possible to flash anything from fastboot.
So I've opened the device and I've short circuited the edl pinpoint to be able to flash with MiTool (I've used an old version since more recent ones gave errors when flashing).
I was able to flash both the latest official ROM and the oldest one which I've found ( daisy_global_images_V11.0.14.0.QDLMIXM_10.0 and daisy_global_images_V9.6.4.0.ODLMIFF_8.1 respectively).
In both cases the device still is "frozen" with the android one logo when I've tried to turn it on after the flashing procedures gave me a successful status.
What else can I do?
i am on PE and been on Linage and then Derp but for 2 weeks now ive tried to go back to factory and for the life of me nothing works ive tried the All N One Tool and MSM Tool and nothing i constantly end up back where i started.
Ive downloaded the latest os firmware from oneplus All N One Tool Downloads the firmware extrasts it the pops up a error saying flash all .bat is missing so dead end there.
could someone lead me in the right direction or explain to me if im doing something wrong.... thanks
[CLOSED] T-Mobile 7T Conversion to International WITHOUT unlocked bootloader/SIM unlock!
Here is a patched MSM download tool for TMobile OP7T. It will bypass the need to sim unlock before unlocking the bootloader, and will also bypass the need of an unlock token file from OnePlus (hence skip the wait period of 1 week to get the...
forum.xda-developers.com
this will be my last onepluse thatr for sure going back to Pixel 4 XL didnt have no issues going back to stock this is crazy
I'm having the same issue, so I'm gonna piggyback this in hopes of a different direction.. Long story, short, I've spent hours trying to get back to OOS from crdroid 11. the link above got me back to booting up t-mobile and relocks the bootloader, but wifi radio doesnt work & restarting brings me to being stuck on the boot logo. none of the other MSMtools work, unlocked or TMO from the unbrick page.
what step am i missing after going through the tmo to int. guide? since that's the only thing that's working.. thanks in advance, i'm attempting round 2 in the meantime.
When u r stuck on pink TMobile screen, force reboot to bootloader by holding vol+, vol-, & power buttons for 10 sec. Once you see phone rebooting, let go of power button only to enter bootloader mode. Then type "fastboot reboot fastboot" on PC while USBC cable is plugged into phone. This will kick phone into fastbootD mode. Then fastboot flash all stock rom files.
When wifi and 4g not working, u did not enter fastbootD mode, so system did not flash right
SageChrono said:
I'm having the same issue, so I'm gonna piggyback this in hopes of a different direction.. Long story, short, I've spent hours trying to get back to OOS from crdroid 11. the link above got me back to booting up t-mobile and relocks the bootloader, but wifi radio doesnt work & restarting brings me to being stuck on the boot logo. none of the other MSMtools work, unlocked or TMO from the unbrick page.
what step am i missing after going through the tmo to int. guide? since that's the only thing that's working.. thanks in advance, i'm attempting round 2 in the meantime.
Click to expand...
Click to collapse
Above
HueyT said:
Above
Click to expand...
Click to collapse
i was just coming to edit my post. rookie mistake - i forgot to overwrite adb/fastboot tools everytime i moved the OS files to my adb folder lol... somehow i forgot a bunch of times
phone is booting up without that userspace error, so i may be back in good shape!
edit 2.0: all booted up with wifi/camera working again
well gonna try again for the 4th time this time im gonna use a different computer and see if that works..... UUUGGGG
well the 4th time fail to restore back to stock OOS.. its gotta be something im doing bc i even used a different computer. but gonna keep looking around for another route.
msmdownloaderTool says this (Device Not Match Image) the device seems to time out and disconnects from MSMDownloaderTool every time. any advice i have the global version 7T 1905
HueyT said:
[CLOSED] T-Mobile 7T Conversion to International WITHOUT unlocked bootloader/SIM unlock!
Here is a patched MSM download tool for TMobile OP7T. It will bypass the need to sim unlock before unlocking the bootloader, and will also bypass the need of an unlock token file from OnePlus (hence skip the wait period of 1 week to get the...
forum.xda-developers.com
Click to expand...
Click to collapse
this would not work for me im assuming bc i have the global HD1905 not the T Mobile branded. u can read above why it wouldn't work . but i seem to have made some progress using the All in One Tool i clicked on flash factory image tab and at first it keep error out saying no Flash-All.bat found after unzipping it. so i kelp looking around and finally foud a factory zip that had the Flash-All.bat file in it so tried again using the Allin One Tool clicked Flash Factory image and it unzipped it and flashed fine but now i cant boot to the OOS it just reboots to the " your bootloader is unlocked integrity screen and stays . but i can boot in fastboot mode and recovery which is now factory recovery. i noticed that it flashed the OOS zip on slot A so i think the reason its not booting up to OOS is bc i need it flased on both slots ??
scoot0073 said:
this would not work for me im assuming bc i have the global HD1905 not the T Mobile branded. u can read above why it wouldn't work . but i seem to have made some progress using the All in One Tool i clicked on flash factory image tab and at first it keep error out saying no Flash-All.bat found after unzipping it. so i kelp looking around and finally foud a factory zip that had the Flash-All.bat file in it so tried again using the Allin One Tool clicked Flash Factory image and it unzipped it and flashed fine but now i cant boot to the OOS it just reboots to the " your bootloader is unlocked integrity screen and stays . but i can boot in fastboot mode and recovery which is now factory recovery. i noticed that it flashed the OOS zip on slot A so i think the reason its not booting up to OOS is bc i need it flased on both slots ??
Click to expand...
Click to collapse
[OP7T][OOS 11.0.5.1 HD65AA/BA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
using the " All in One Tool "
Flashing is not allowed for Critical Partitions
is this normal error when flashing back to stock OOS ? when the flashing starts it says this for the first 4 or 5 flashing parts then it stats flashing as described in OP. then it reboots out of fastboot and boots to stock recovery then it finishes the flashing . then at the end it says to press any key to continue and the phone reboots and hangs at the screen that lets me know the bootloader is unlock screen. i flashed both a \b partitions and still does the same thing. its like the boot image is not flashing or im missing something else in the OP to get back to stock OOS.
anyone can help me please ?
"Fastboot reboot fastboot" will enter fastbootD mode to allow flashing system parts
HueyT said:
"Fastboot reboot fastboot" will enter fastbootD mode to allow flashing system parts
Click to expand...
Click to collapse
ok that command worked it successfully Flashed all partitions and when it it it finished it said to press any key to continue .... i did and it rebooted into stock recovery and finished the flashing . then it reboots to the Your Bootloader is unlocked warning and stays there . so i went into recovery and factory reset everything and still hangs at the bootloder unlocked warningthat was all on Slot b so i was like maybe i need to flash both Slots so i switched to slot a active and repeated the whole process above and still nothing hangs again at the bootloader is unlocked warning... ggggrrrrr
what gives..... this is all done using the All in One Tool ... i know im getting close to getting it back to Stock OOS as i made progress with your help.
i then downloaded the factory image from OnePlus site but that was a no go as the zip had only something called Payload which wouldn't flash ..
anymore knowledge u might can share and thank you very much for your help
Go back to fastbootD and flash-all parts manually on A slot, then go to bootloader, type "fastboot set_active other" to go into B slot and repeat fastbootD flashing all parts again. Then go into stock recovery to format data and then reboot
HueyT said:
Go back to fastbootD and flash-all parts manually on A slot, then go to bootloader, type "fastboot set_active other" to go into B slot and repeat fastbootD flashing all parts again. Then go into stock recovery to format data and then reboot
Click to expand...
Click to collapse
that did it im back to all stock oos thank you so much buddy couldn't have doe it without your knowledge. crazy that none of the tools didn't work mine must have been a rare odd ball that i had to flash everything manually.
again thank you.
Hello, has been a w hile since I was here last time. However, my moto g 5g plus gives me a hard time now. I was using it and at some point the power button stopped working. First it worked only randomly but now it is dead. Before the phone shut down i was able to test the fingerprint sensor and it worked. The last few days i noticed that the connection resets randomly from 5G to 4G to H+ and sometimes i had to restart the phone to have a working connection. I was thinking there is a firmware bug in the stock firmware that continues showing up over time. Last time i did a firmware recovery using the motorola rescue tool but that doesen't work anymore because i cant enter boot loader mode. I have seen that there is the qualcom flash tool out there and im wondering if im able to flash the device without bootloader mode as im not able to start it. And if the problem is software related or not. For the qualcom flash tool i probably need the "firehose" files, where can i find the right one for my device?
I have an update, I think it is a software problem. I have tried unlocking the bootloader and as soon I did everything worked same before. Then I flashed linageos and as as able to use it for one day until (when playing pokemon go it happened again) now the power button responds with delay. But it responds. I have tried to reflash lineage and stock using rescue assistant but nothing helps. Then I tried reboot in edl mode for blankflash but that one also doesent work. It starts the process when it sees the device but it terminates with an error. I have dumped all partitions using the recovery shell. But not sure where to search for as I don't have a dump of the stock partitions. I think there has been some corruption of one of the data in _a slot and now _b slot too. Someone knows what and where to look for? Maybe I need a dump of stock device?
It seems there is something wrong with bootloader. Now I'm not able to flash in fastboot mode. But it works when I flash the gpt.bin after restart in fastboot. I start the download on the PC and then connect the phone and power up in bootloader mode. After that I can flash as normal but after reboot everything same before, no fastboot working. And if I flash stock ROM and lock the bootloader it says no operating system found. I have tried using blankflash from lolinet but that one also doesent work. It recognises the device but then it stops. Is it possible that I have got this sort of thing ota? This is so weird. The power button works but just delayed. Is it on a different chip what is maybe broken? But that would be very strange. I have another phone I treat not as nice as this one and that works like new.
Ah I enter edl by using linage recovery
Deleted all the partitions, now it seems the device doesn't boot the stock ROM if I flash it. What are the essential partitions needed to boot the stock ROM? How can I restore the missing partitions? Thanks