Develop Bugs

NEED HELP

I have a brand new Pixel XL from Verizon that I received today and was successful in unlocking. However, I tried to root and now I am stuck on bootloop. I cannot post in DEVELOPMENT because I haven't posted here in years (haven't had ANDROID in a while). Can anyone help? I am able to access via fastboot (I believe) but I must be flashing the wrong images. I don't want to brick this nice new day-old device. I have been at it for 5 hours via research on my own, but now I am looking for someone that can help me via P.M. or what it may take. I really want to get back to enjoying this device! Thanks in advance!

bdsuser said:
I have a brand new Pixel XL from Verizon that I received today and was successful in unlocking. However, I tried to root and now I am stuck on bootloop. I cannot post in DEVELOPMENT because I haven't posted here in years (haven't had ANDROID in a while). Can anyone help? I am able to access via fastboot (I believe) but I must be flashing the wrong images. I don't want to brick this nice new day-old device. I have been at it for 5 hours via research on my own, but now I am looking for someone that can help me via P.M. or what it may take. I really want to get back to enjoying this device! Thanks in advance!
Click to expand...
Click to collapse
Read the third post in the thread below to get set up and back to stock. Then we will work on root. If you tried to root and you bootlooped it then you used the wrong​ SU.
https://forum.xda-developers.com/pixel/help/stupidly-bootloop-help-t3554242

1. Download a ROM. A stock version is probably in the forums somewhere if that's what you want.
2. Download TWRP image and zip from the TWRP thread.
3. Download SuperSU from the SuperSU thread.
4. Download a vendor image. There's no "official" vendor image thread AFAIK, but you can grab one from the Pure Nexus rom thread. NMF26V is compatible with all 7.1.1 ROMs & stock.
Now you have two options:
Fast: Put the ROM, TWRP(zip only), SuperSU and vendor image on USB flash drive, then connect the USB 3 to USB C adapter to your flash drive. Don't connect it to the phone yet. An external HDD/SSD should also work if that's all you've got.
Slow: While in TWRP(Instructions below) push the ROM, TWRP(zip only), SuperSU and vendor image files to your phone through ADB with "adb push C:\file_path\ /sdcard/" sans quotes. You will need to do this for each file, or alternatively push a folder containing the four files. adb file transfer is very slow.
5. Boot your phone to the bootloader, and connect it to your computer. This can be achieved by holding volume down and power from an off state.
Note: If your device is still bootlooping you won't be able to get to the bootloader. Hold volume up and power until the device shuts off to get out of the bootloop temporarily, then boot to bootloader.
6. In a command window, "fastboot boot twrp.img"
7. Connect your flash drive to your phone if you chose that option, or push the files through adb if you chose that option
8. Flash TWRP zip, ROM and vendor image. STAY IN TWRP
9. Return to TWRP's home screen > advanced > file manager. Scroll down until you see 'fstab.marlin'(in the root '/' directory). Tap on 'fstab.marlin' and delete it. Skipping this step means SuperSU won't install.
10. Flash SuperSU zip, reboot to system and you're done.

SDK
TonikJDK said:
Read the third post in the thread below to get set up and back to stock. Then we will work on root. If you tried to root and you bootlooped it then you used the wrong​ SU.
https://forum.xda-developers.com/pixel/help/stupidly-bootloop-help-t3554242
Click to expand...
Click to collapse
Just thought I'd update you...And I know I sound like I have no idea what I'm doing but traditionally I've never had issues like this But I am trying to get ADB to show the flash-all command. The one I have installed doesn't show that feature so I can't follow the tutorial. If you have a direct link to what I may be missing I would appreciate it otherwise I will update you once I figure it out.

bdsuser said:
Just thought I'd update you...And I know I sound like I have no idea what I'm doing but traditionally I've never had issues like this But I am trying to get ADB to show the flash-all command. The one I have installed doesn't show that feature so I can't follow the tutorial. If you have a direct link to what I may be missing I would appreciate it otherwise I will update you once I figure it out.
Click to expand...
Click to collapse
The link to the proper adb and fastboot are in the post i pointed you to.

Help with root and TWRP
TonikJDK said:
The link to the proper adb and fastboot are in the post i pointed you to.
Click to expand...
Click to collapse
Thanks for your assistance. I now have root installed and I think I'm good except for one thing. I keep thinking TWRP is installed but for some reason when I reboot to bootloader, then select reboot recovery mode, it takes me to android recovery. I am used to recovery taking me to TWRP. I know TWRP works but I feel like I'm temporarily flashing it each time or something. I even installed the twrp app and I see I can flash zips that way, etc, but I wanted to know if you knew how to make the phone boot to TWRP in recovery? Or is that necessary?

bdsuser said:
Thanks for your assistance. I now have root installed and I think I'm good except for one thing. I keep thinking TWRP is installed but for some reason when I reboot to bootloader, then select reboot recovery mode, it takes me to android recovery. I am used to recovery taking me to TWRP. I know TWRP works but I feel like I'm temporarily flashing it each time or something. I even installed the twrp app and I see I can flash zips that way, etc, but I wanted to know if you knew how to make the phone boot to TWRP in recovery? Or is that necessary?
Click to expand...
Click to collapse
I dont do it that way on this phone. TWRP and SU are modifying the same parts of the phone, and there are cases where it could conflict. Rare, not a big deal, but since i don't need TWRP installed i don't.
To install it ypu first boot to it.
Fastboot boot twrpFilename.
Then from within TWRP you install the TWRP zip.
Make sure it is TWRP RC1

All set
Thanks again for your help. I am running pure ROM as I mentioned and I seem to like it. Do you K or if Franco works with Pure or do you have a suggestion on a good rom/kernel? Is there anything else that you can suggest I should be using with the new phone? I remember there used to be tools that you could install that allowed you to customize the system even further but the name escapes me. . Is there anything like that or even a theme tool which is a must have when you are rooted and running custom roms? No big deal if not. Very happy with where I stand now. Really appreciate you getting me back up and running!

You are most welcome. I don't ROM so I don't know what kernels work with what roms for sure. But my understanding is that they are all pretty universal. I run stock with Franco.
Other than that i dont mod much. Ad blocker, black themes and a few adjustments to Franco.

TonikJDK said:
You are most welcome. I don't ROM so I don't know what kernels work with what roms for sure. But my understanding is that they are all pretty universal. I run stock with Franco.
Other than that i dont mod much. Ad blocker, black themes and a few adjustments to Franco.
Click to expand...
Click to collapse
Perfect! Thanks yet again. Have a great remainder of the day!

bdsuser said:
Thanks again for your help. I am running pure ROM as I mentioned and I seem to like it. Do you K or if Franco works with Pure or do you have a suggestion on a good rom/kernel? Is there anything else that you can suggest I should be using with the new phone? I remember there used to be tools that you could install that allowed you to customize the system even further but the name escapes me. . Is there anything like that or even a theme tool which is a must have when you are rooted and running custom roms? No big deal if not. Very happy with where I stand now. Really appreciate you getting me back up and running!
Click to expand...
Click to collapse
Im running pure and elementalx with excellent results.
?Tapped from my pure pixelXl?

have you ever seen an issue where the phone boots to twrp even though everything was working fine? It starts happening if I do a restart. Then no matter what it boots into TWRP unless I wipe again? I believe it's happening after I flash root but I'm going out of my mind with trial and error. Any help would be appreciated.

bdsuser said:
have you ever seen an issue where the phone boots to twrp even though everything was working fine? It starts happening if I do a restart. Then no matter what it boots into TWRP unless I wipe again? I believe it's happening after I flash root but I'm going out of my mind with trial and error. Any help would be appreciated.
Click to expand...
Click to collapse
HELLO!!! I understand any frustrations you may be having, as the pixel devices have changed a good bit for us as far as development. Anyways. I'm just going to throw some knowledge out there, then proceed to help get you up and running!
You couldn't post in the development section because of your post count, but even if you could, it would have been in the wrong section and it would have been removed, or moved to the questions section.
Also, I see someone has pointed it out earlier, but I'll say it again just to make sure everything is clear. The command you were running "fastboot boot TWRP.img" only boots TWRP temporarily. You are suppose to have two files, one IMG file and one zip file. You boot the IMG file, then once you're in TWRP, you flash the zip file, then reboot to recovery and you will have installed TWRP properly.
With root, flashing wrong files or using the outdated root method will cause boot loops. The correct way to root (again already been said) is the get TWRP up and running, delete the fstab file (see earlier post) then flash SuperSU and reboot. Just throwing this out there Incase someone comes across it, if you manage to boot loop your device due to to rooting, you can fastboot flash franco's kernel and it will fix the bootloop (,but you won't have root) this isn't the correct way to fix it, but it will get you back up and running without downloading the large factory image.
***About to edit this post to continue giving more info***
Here is a correct guide and good template to get you running.
start by flashing a clean factory image, then let it boot and get it set up.
Reboot to fastboot, fastboot boot TWRP IMG then flash TWRP zip using the latest versions (RC1 is latest, pm me for more info).
Reboot the phone to recovery to ensure TWRP stuck.
Go-to advanced, file manager in TWRP and find the fstab.marlin file and delete.
Then you can go ahead and flash the latest SuperSU (I use 2.79 sr3) and when it's done reboot to system and verify root.
After rooting you can go ahead and flash a kernel if you want, I use elemental which you can flash in TWRP, but see the kernel instructions prior to flashing.
Reboot and you have a nice stock ROM with root and kernel.
For flashing Roms, kind of follow the same template, most Roms require you to flash part of or the whole latest factory image.
If your on a clean install, go ahead and install TWRP as mentioned above.
Then use TWRP to install whatever ROM you want per ROM developer instructions.
Side note, some Roms replace the TWRP with cwm or stock recovery, so it's always nice to flash the TWRP zip after flashing a ROM.
After flashing ROM, boot to system to make sure all is well, then boot back to recovery and follow instructions above for root/kernel.
As far as the problem you're having now, it usually comes from flashing outdated SuperSU images. Do a search for 2.79 sr3 and use it to root (pm me if you need help)
You might have to start clean one more time, And flash factory image.

noidea24 said:
HELLO!!! I understand any frustrations you may be having, as the pixel devices have changed a good bit for us as far as development. Anyways. I'm just going to throw some knowledge out there, then proceed to help get you up and running!
You couldn't post in the development section because of your post count, but even if you could, it would have been in the wrong section and it would have been removed, or moved to the questions section.
Also, I see someone has pointed it out earlier, but I'll say it again just to make sure everything is clear. The command you were running "fastboot boot TWRP.img" only boots TWRP temporarily. You are suppose to have two files, one IMG file and one zip file. You boot the IMG file, then once you're in TWRP, you flash the zip file, then reboot to recovery and you will have installed TWRP properly.
With root, flashing wrong files or using the outdated root method will cause boot loops. The correct way to root (again already been said) is the get TWRP up and running, delete the fstab file (see earlier post) then flash SuperSU and reboot. Just throwing this out there Incase someone comes across it, if you manage to boot loop your device due to to rooting, you can fastboot flash franco's kernel and it will fix the bootloop (,but you won't have root) this isn't the correct way to fix it, but it will get you back up and running without downloading the large factory image.
***About to edit this post to continue giving more info***
Here is a correct guide and good template to get you running.
start by flashing a clean factory image, then let it boot and get it set up.
Reboot to fastboot, fastboot boot TWRP IMG then flash TWRP zip using the latest versions (RC1 is latest, pm me for more info).
Reboot the phone to recovery to ensure TWRP stuck.
Go-to advanced, file manager in TWRP and find the fstab.marlin file and delete.
Then you can go ahead and flash the latest SuperSU (I use 2.79 sr3) and when it's done reboot to system and verify root.
After rooting you can go ahead and flash a kernel if you want, I use elemental which you can flash in TWRP, but see the kernel instructions prior to flashing.
Reboot and you have a nice stock ROM with root and kernel.
For flashing Roms, kind of follow the same template, most Roms require you to flash part of or the whole latest factory image.
If your on a clean install, go ahead and install TWRP as mentioned above.
Then use TWRP to install whatever ROM you want per ROM developer instructions.
Side note, some Roms replace the TWRP with cwm or stock recovery, so it's always nice to flash the TWRP zip after flashing a ROM.
After flashing ROM, boot to system to make sure all is well, then boot back to recovery and follow instructions above for root/kernel.
As far as the problem you're having now, it usually comes from flashing outdated SuperSU images. Do a search for 2.79 sr3 and use it to root (pm me if you need help)
You might have to start clean one more time, And flash factory image.
Click to expand...
Click to collapse
There is absolutely no need to delete the fstab file anymore. That only needed to be done when TWRP was still alpha 2, and almost three versions of su earlier.
ALL roms replace TWRP with stock recovery unless you are using lineage then you will get Cyanogenmod recovery, so reflashing TWRP before booting into system is a must.
If you are flashing root and or custome kernel and end up in a bootloop, flashing the stock boot.img to both slots via:
'fastboot flash --slot _a boot boot.img'
'fastboot flash --slot _b boot boot.Img'
will fix the issue and you will be able to boot up just fine. Again you will have to reboot into TWRP from the bootloader and reflash the zip. When you are done flashing the boot.img's you might as well just
'Fastboot boot TWRP-file.img'
Then install the zip!

trying to flash twrp; it just hangs!

Hi all,
*I've unlocked bootloader
* Have tried fastboot boot TWRP.img, as well as tried flashing TWRP RC1 via the Skipsoft toolkit.
Every way I've tried the phone just sits at the TWRP boot screen and doesn't allow me to go any further..
Any help here would be truly appreciated!
Cheers,

I've been having the same issue tonight. Re-flash the stock image, go through the whole setup process and make sure you add a lockscreen pin, then flash TWRP. That is what worked for me. I still can't flash a Rom though for some reason. It's driving me insane.

dutchy716 said:
I've been having the same issue tonight. Re-flash the stock image, go through the whole setup process and make sure you add a lockscreen pin, then flash TWRP. That is what worked for me. I still can't flash a Rom though for some reason. It's driving me insane.
Click to expand...
Click to collapse
You're braver than me. I haven't had my Pixel XL long but this is the first phone I've ever owned where I am afraid to try and install a custom recovery and ROM. With the dual partitions and what I hear about TWRP still being buggy it just seems like Google didn't want people to run anything but pure Android on the Pixels.

dutchy716 said:
I've been having the same issue tonight. Re-flash the stock image, go through the whole setup process and make sure you add a lockscreen pin, then flash TWRP. That is what worked for me. I still can't flash a Rom though for some reason. It's driving me insane.
Click to expand...
Click to collapse
Same issue here, but no solution. Adding a lockscreen pin didn't change anything for me. I just get a teamwin image but it just sits there & doesn't actually open TWRP. My bootlocker is unlocked but thats as far as I can get 7.1.2 with May security. I have tried reloading everything and followed commonly recommended steps.
Any suggestions greatly appreciated. I would love to get this thing rooted and get some ROM flexibility - even to just get rid of the Nav Bar ....

mikefnz said:
Same issue here, but no solution. Adding a lockscreen pin didn't change anything for me. I just get a teamwin image but it just sits there & doesn't actually open TWRP. My bootlocker is unlocked but thats as far as I can get 7.1.2 with May security. I have tried reloading everything and followed commonly recommended steps.
Any suggestions greatly appreciated. I would love to get this thing rooted and get some ROM flexibility - even to just get rid of the Nav Bar ....
Click to expand...
Click to collapse
I have never had a problem. Make sure your using the rc1 fast boot TWRP. Should be fastboot boot twrp.img. I change file name to this or copy and paste. Then you install rc1 or rc2 zip.
I know you will have problems if you try to install the wrong file.

mac796 said:
I have never had a problem. Make sure your using the rc1 fast boot TWRP. Should be fastboot boot twrp.img. I change file name to this or copy and paste. Then you install rc1 or rc2 zip.
I know you will have problems if you try to install the wrong file.
Click to expand...
Click to collapse
I am doing exactly as you mentioned.. flash rc1.img, however the phone does not go beyond the boot screen, it just sits there.... Can I ask what steps you are taking prior to flashing twrp? Thanks!

mazubo said:
I am doing exactly as you mentioned.. flash rc1.img, however the phone does not go beyond the boot screen, it just sits there.... Can I ask what steps you are taking prior to flashing twrp? Thanks!
Click to expand...
Click to collapse
Hmm are you on may bootloader because i think modifying the boot partition causes bootloop without the boot signature?

XtraArrow said:
Hmm are you on may bootloader because i think modifying the boot partition causes bootloop without the boot signature?
Click to expand...
Click to collapse
Yes I am.. should I downgrade to 7.1.1? Tjere was no mention of that issue in the skipsoft toolkit thread... Weird!

mazubo said:
Yes I am.. should I downgrade to 7.1.1? Tjere was no mention of that issue in the skipsoft toolkit thread... Weird!
Click to expand...
Click to collapse
Sure, i guess.. or you could just manually flash the April bootloader. a lot easier.

XtraArrow said:
Sure, i guess.. or you could just manually flash the April bootloader. a lot easier.
Click to expand...
Click to collapse
Ok, would flashing just the bootloader wipe the phone? Also how would I find just the bootloader? Thanks for the suggestion, I haven't flashed just a bootloader before..

mazubo said:
I am doing exactly as you mentioned.. flash rc1.img, however the phone does not go beyond the boot screen, it just sits there.... Can I ask what steps you are taking prior to flashing twrp? Thanks!
Click to expand...
Click to collapse
That strange. I just flash a factory image from Google
Set up a security pattern
Enable adb debugging
Fastboot boot twrp 3.0.2-0 rc1 IMG
Make sure it asks for your security pattern if it doesn't reboot to bootloader and fastboot twrp again, and keep repeating until it does
Install twrp 3.1.0.0 rc2 or rc1 zip
If your using may bootloader's fish VBS 6 zip
And it should stick, if you flash. Anything else that messes with boot flash that VBS zip at the end again

mazubo said:
Ok, would flashing just the bootloader wipe the phone? Also how would I find just the bootloader? Thanks for the suggestion, I haven't flashed just a bootloader before..
Click to expand...
Click to collapse
If you download the offiial april firmware, you can manually extract it from the .zip then you would do this command in fastboot :--------- fastboot flash bootloader PUTFILEHERE.img
EDIT: Are you able to get into TWRP by any chance??

mac796 said:
That strange. I just flash a factory image from Google
Set up a security pattern
Enable adb debugging
Fastboot boot twrp 3.0.2-0 rc1 IMG
Make sure it asks for your security pattern if it doesn't reboot to bootloader and fastboot twrp again, and keep repeating until it does
Install twrp 3.1.0.0 rc2 or rc1
If your using may bootloader's fish VBS 6 zip
And it should stick, if you flash. Anything else that messes with boot flash that VBS zip at the end again
Click to expand...
Click to collapse
Hmm, maybe this is where I've gone wrong.. I thought the need to create a security pin/pattern was only if coming from a previously rooted state, or from a custom ROM. I will try this as well and report back.. thanks!

XtraArrow said:
If you download the offiial april firmware, you can manually extract it from the .zip then you would do this command in fastboot :--------- fastboot flash bootloader PUTFILEHERE.img
EDIT: Are you able to get into TWRP by any chance??
Click to expand...
Click to collapse
Unable to get into twrp as previously mentioned. I flash the IMG file, then it just hangs on the TWRP boot screen..

mazubo said:
Unable to get into twrp as previously mentioned. I flash the IMG file, then it just hangs on the TWRP boot screen..
Click to expand...
Click to collapse
Alright, try doing what I mentioned. Download April firmware, extract the bootloader.img from it and flash using command above.

XtraArrow said:
Alright, try doing what I mentioned. Download April firmware, extract the bootloader.img from it and flash using command above.
Click to expand...
Click to collapse
This seems likely to work. Thanks for the suggestions, and I'll report back! Cheers!

mazubo said:
This seems likely to work. Thanks for the suggestions, and I'll report back! Cheers!
Click to expand...
Click to collapse
I'm no expert but it's seems like a decent suggestion. Let us know how it goes.

@mazubo
You keep stating that you just flash the image. Are you flashing it from the bootloader then trying to boot to recovery?
You have to boot TWRP from your PC first. Then from TWRP you can then "flash" TWRP.
Just wanted to make sure that was a step you were taking!

Just wait. It will take little longer
Sent from my Pixel XL using Tapatalk

freddy0872 said:
@mazubo
You keep stating that you just flash the image. Are you flashing it from the bootloader then trying to boot to recovery?
You have to boot TWRP from your PC first. Then from TWRP you can then "flash" TWRP.
Just wanted to make sure that was a step you were taking!
Click to expand...
Click to collapse
Yes, I have tried fastboot to flash the TWRP img, as well as skipsofts toolkit. I guess I've been using the term "flash" for fastboot, as I haven't been able to use twrp yet.. I understand that you need to flash the TWRP img via pc and then flash the TWRP zip, then SuperSU or magisk, whatever your poison may be !

Issues on top of issues rooting Pixel 2 XL! Help? :(

First, I followed a tutorial precisely and ended up with a bootloop. It was just stuck at the white screen with a G. This was only after flashing the patched_boot.img file that Magisk gave me. I searched for hours online for an answer for that, and my device isn't listed when I type "adb devices." It's just blank. I uninstalled and reinstalled the drivers, I used different usb ports, different cables, I'm using the latest Google usb drivers, as well as the latest adb/fastboot files.
I wanted to push twrp to my phone via ADB, so I can flash magisk that way and fix this issue. I've read that it fixed my problem for other people, but sadly I'm unable to so far. When I try using the command "adb push twrp.zip /sdcard/" I get the following error:
"adb: error: failed to get feature set: no devices/emulators found"
In case anyone was wondering this is the tutorial I initially followed: https://youtu.be/M-0NIUUvYI4
I really don't know where to go from here. I've been looking around for 6 hours straight. All help is most appreciated.

Fastboot boot the twrp img file, then once you're in twrp, adb push the twrp zip file, and the stock boot image (extract it from whatever security update you're on). Then, adb push the magisk zip file (instead of a patched boot image) and download and adb push a custom kernel as well.
Flash the stock boot img, then twrp zip, then a custom kernel to retain touch functionality within twrp (I recommend flash kernel) and finally flash the magisk zip file and once you reboot, you should be good to go.

rickysidhu_ said:
Fastboot boot the twrp img file, then once you're in twrp, adb push the twrp zip file, and the stock boot image (extract it from whatever security update you're on). Then, adb push the magisk zip file (instead of a patched boot image) and download and adb push a custom kernel as well.
Flash the stock boot img, then twrp zip, then a custom kernel to retain touch functionality within twrp (I recommend flash kernel) and finally flash the magisk zip file and once you reboot, you should be good to go.
Click to expand...
Click to collapse
Thanks for the response, Ricky. I tried using the ADB sideload feature in TWRP but it just stuck at "Starting ADB sideload feature..." and eventually fails. Then I used a flash drive and connected it to the phone via the adapter, and that worked. Unfortunately, after flashing those files it was still stuck at the same bootloop screen. I went back to TWRP and now the usb flash drive isn't being recognized. What should I do?
Edit: I was able to FINALLY get it out of the bootloop! I tried this script earlier and it didn't work, but it was because I didn't have the critical partitions unlocked (https://forum.xda-developers.com/pixel-2/development/tool-deuces-bootloop-recovery-flashing-t3725778). Unlocked them, ran the script, works perfectly now. However, now I'm going to root it via TWRP and use the files you mentioned. Will do that tomorrow after sleep!

rickysidhu_ said:
Fastboot boot the twrp img file, then once you're in twrp, adb push the twrp zip file, and the stock boot image (extract it from whatever security update you're on). Then, adb push the magisk zip file (instead of a patched boot image) and download and adb push a custom kernel as well.
Flash the stock boot img, then twrp zip, then a custom kernel to retain touch functionality within twrp (I recommend flash kernel) and finally flash the magisk zip file and once you reboot, you should be good to go.
Click to expand...
Click to collapse
Hey I just wanted to inform you that I did get it working after continuing where I left off last. Thanks for your help, Ricky. It's much appreciated. Now I'm just gonna investigate on how to update OTA with magisk.

Mr December said:
Hey I just wanted to inform you that I did get it working after continuing where I left off last. Thanks for your help, Ricky. It's much appreciated. Now I'm just gonna investigate on how to update OTA with magisk.
Click to expand...
Click to collapse
If your going the OTA route, which, personally, I wouldn't if your bootloader is "fully" unlocked, you'll need to completely unroot, and return back to stock recovery. Not trying to deter you, I just think that fastbooting the monthly factory images is much easier, with fewer chances for errors. Not to mention, if you know the proper technique, you won't lose any data :good:

Badger50 said:
If your going the OTA route, which, personally, I wouldn't if your bootloader is "fully" unlocked, you'll need to completely unroot, and return back to stock recovery. Not trying to deter you, I just think that fastbooting the monthly factory images is much easier, with fewer chances for errors. Not to mention, if you know the proper technique, you won't lose any data :good:
Click to expand...
Click to collapse
That sounds sick to me. :laugh: Would you mind pointing me in the right direction to a tutorial that has the proper technique to get it done without losing any data?

Mr December said:
That sounds sick to me. :laugh: Would you mind pointing me in the right direction to a tutorial that has the proper technique to get it done without losing any data?
Click to expand...
Click to collapse
This is how I do my monthly updates

Badger50 said:
This is how I do my monthly updates
Click to expand...
Click to collapse
Thanks bro I'll give it a shot today :laugh:

Badger50 said:
This is how I do my monthly updates
Click to expand...
Click to collapse
Hey I'm not exactly sure which factory image I should choose. When I was rooting the phone the tutorial said to use the image with the same build number. My current build number is "OPM1.171019.018, Feb 2018", and I'm assuming what I should do is use this one "OPM2.171019.029, Apr 2018"?
https://developers.google.com/android/images#taimen

Mr December said:
Hey I'm not exactly sure which factory image I should choose. When I was rooting the phone the tutorial said to use the image with the same build number. My current build number is "OPM1.171019.018, Feb 2018", and I'm assuming what I should do is use this one "OPM2.171019.029, Apr 2018"?
https://developers.google.com/android/images#taimen
Click to expand...
Click to collapse
You are correct :good:

cannot flash any roms, errors

Without fail, when running the latest twrp, I get an error when flashing different rom zips. It's always the same error during step 1 and sometimes during step 2. I am on slot A when flashing the room, by the way.
The error just says it can't flash, there is no error code or description or anything like that.
When I was able to flash a rom, I tried to reboot into B for the vendor image, but none of my files were viewable, only folders with numbers and letters.
I'm confused, and I'm not a noob. I came from the regular Pixel and I was able to flash no problem.

stevew84 said:
Without fail, when running the latest twrp, I get an error when flashing different rom zips. It's always the same error during step 1 and sometimes during step 2. I am on slot A when flashing the room, by the way.
The error just says it can't flash, there is no error code or description or anything like that.
When I was able to flash a rom, I tried to reboot into B for the vendor image, but none of my files were viewable, only folders with numbers and letters.
I'm confused, and I'm not a noob. I came from the regular Pixel and I was able to flash no problem.
Click to expand...
Click to collapse
Is this when you fastboot into twrp, or do you have twrp already installed? Have you tried disabling screen lock before you enter twrp? And I assume you've run both bootloader unlocking commands as well?

This is when using skipsoft.
Do I need to run the critical flashing command manually or something? The reason I ask is because I'm not sure skipsoft does that.
I'd love to be able to flash alll this stuff without even using twrp but I'm not sure that's possible.
So I boot twrp, wipe and flash the ROM. But it fails right there. Is there a step I'm missing?
I do know how to flash individual images thru fastboot by the way, like when going to stock. Here is where I did do the critical flash command.
No I haven't tried to disable screen lock.

stevew84 said:
This is when using skipsoft.
Do I need to run the critical flashing command manually or something? The reason I ask is because I'm not sure skipsoft does that.
I'd love to be able to flash alll this stuff without even using twrp but I'm not sure that's possible.
So I boot twrp, wipe and flash the ROM. But it fails right there. Is there a step I'm missing?
I do know how to flash individual images thru fastboot by the way, like when going to stock. Here is where I did do the critical flash command.
No I haven't tried to disable screen lock.
Click to expand...
Click to collapse
Typically you need to have fully unlocked the bootloader with these 2 commands...
fastboot flashing unlock
and.....
fastboot flashing unlock_critical
Especially the critical, or else you won't be able to flash any roms. I don't know if skipsoft will do this. I know the Deuces scrip will. To find out what is/isn't unlocked run.....fastboot getvar all....
Then you'll know. If you have to unlock critical, which I think you will, it'll wipe your phone completely. So backup your files and such before you do :good:

Any manual methods that work? I mean to flash the roms.

stevew84 said:
Any manual methods that work? I mean to flash the roms.
Click to expand...
Click to collapse
I believe there is, but I can't find what it is. I think it's adb push (name of file) or adb sideload through twrp, butI could be wrong. Either way, you first need to be sure your fully bootloader unlocked before you can flash anything.

Badger50 said:
I believe there is, but I can't find what it is. I think it's adb push (name of file) or adb sideload through twrp, butI could be wrong. Either way, you first need to be sure your fully bootloader unlocked before you can flash anything.
Click to expand...
Click to collapse
Ok I almost forgot.
When I first unlocked the phone I was able to flash Nitrogen, both the ROM and twrp. But when I rebooted recovery to get to slot B, all I saw were various numbered and lettered folders. Looked like registry folders for Windows.

stevew84 said:
Ok I almost forgot.
When I first unlocked the phone I was able to flash Nitrogen, both the ROM and twrp. But when I rebooted recovery to get to slot B, all I saw were various numbered and lettered folders. Looked like registry folders for Windows.
Click to expand...
Click to collapse
Well that changes things a little. You at least have unlocked one partition then. And you can update factory images via fastboot? If so, then your fully unlocked. So you've got a twrp decryption error on slot B. You may want to disable screen lock security, and try again. You could also try fastbooting into twrp as well with screen lock also disabled.

Thanks. I'll try that out later.
But after I was unable to get into Nitrogen, I flashed stock manually and tried it all over. From this point I kept getting error after error in twrp.
After the errors, I got the Device is Corrupt screen, and freezing on the Google splash. From there I'd have to again start all over.

stevew84 said:
Thanks. I'll try that out later.
But after I was unable to get into Nitrogen, I flashed stock manually and tried it all over. From this point I kept getting error after error in twrp.
After the errors, I got the Device is Corrupt screen, and freezing on the Google splash. From there I'd have to again start all over.
Click to expand...
Click to collapse
Again, run the.....fastboot getvar all....and see what you get :good:

Thanks.

Badger50 said:
Again, run the.....fastboot getvar all....and see what you get :good:
Click to expand...
Click to collapse
Alright. I'm all unlocked and I disabled any sort of screen lock. I'm trying to flash Nitrogen now and seeing what happens...
and it failed again. I'm at a loss, I've never experienced this before.
The error is "updater process ended with ERROR: 1. Error installing zip........
Trying again because why the hell not. Maybe I'l try another TWRP version.

stevew84 said:
Alright. I'm all unlocked and I disabled any sort of screen lock. I'm trying to flash Nitrogen now and seeing what happens...
and it failed again. I'm at a loss, I've never experienced this before.
The error is "updater process ended with ERROR: 1. Error installing zip........
Trying again because why the hell not. Maybe I'l try another TWRP version.
Click to expand...
Click to collapse
Are you using the latest twrp from here? https://dl.twrp.me/taimen/
Also, you might want to try fastbooting the factory image with the -w removed from the flash-all.bat file to slot B. Then fastboot into twrp and try again. You will not lose any data by doing this.

Badger50 said:
Are you using the latest twrp from here? https://dl.twrp.me/taimen/
Also, you might want to try fastbooting the factory image with the -w removed from the flash-all.bat file to slot B. Then fastboot into twrp and try again. You will not lose any data by doing this.
Click to expand...
Click to collapse
I've read up on how to flash stock images without formatting data, but how would one flash directly to a particular slot? The only way I know how to get into a slot is through TWRP, but aren't there adb commands for this as well?

stevew84 said:
I've read up on how to flash stock images without formatting data, but how would one flash directly to a particular slot? The only way I know how to get into a slot is through TWRP, but aren't there adb commands for this as well?
Click to expand...
Click to collapse
In fastboot mode run...fastboot --set-active=a or b...
In your case select b.
Then, fastboot reboot bootloader
Now your on slot b, and can fastboot the factory image :good:

Badger50 said:
In fastboot mode run...fastboot --set-active=a or b...
In your case select b.
Then, fastboot reboot bootloader
Now your on slot b, and can fastboot the factory image :good:
Click to expand...
Click to collapse
Jesus christ. I'm in a cmd window right now, with the latest platform tools installed.
I ran the command just as you typed, (I'm in bootloader, bootloader version tmz20j by the way). Also, my bootloader version has changed a couple of times during all of this. It was tmz20bb, then tmz12g when I flashed the latest June image...now it's this 20j version.
Anyway, this is what I'm typing and this is what I get in return:
fastboot --set-active=b
fastboot: error: Device does not support slots
I'm at a real loss, obviously this damn device supports slots.
EDIT: OK hold on, when I flashed the June image bootloader version, ran the slot command in ADB, I was able to navigate to the right slot.

Little update.
Followed this guide:
https://forum.xda-developers.com/pixel-xl/how-to/slota-b-how-to-flash-roms-magisk-kernel-t3754175
Rebooted into slot a and the touch screen stopped working. So now I'm going back to stock yet again. Just leaving it that way for now I can't deal with this crap.

stevew84 said:
Little update.
Followed this guide:
https://forum.xda-developers.com/pixel-xl/how-to/slota-b-how-to-flash-roms-magisk-kernel-t3754175
Rebooted into slot a and the touch screen stopped working. So now I'm going back to stock yet again. Just leaving it that way for now I can't deal with this crap.
Click to expand...
Click to collapse
Fwiw, after you flash a rom and twrp, if it doesn't boot up, go back to twrp and flash the rom and twrp again. Flashing roms or taking OTA's automatically switches slots on you. Always best to keep screen lock disabled until you are done.

Badger50 said:
Fwiw, after you flash a rom and twrp, if it doesn't boot up, go back to twrp and flash the rom and twrp again. Flashing roms or taking OTA's automatically switches slots on you. Always best to keep screen lock disabled until you are done.
Click to expand...
Click to collapse
Thanks.

Stuck after flashing patched magisk bootloader img

So i was running Android 10 Nov update rooted WITHOUT TWRP
And i wanted to update to Dec update
So i DLed DEC update factory image took out the -w booted my phone into the bootloader flash-all
It does its thing phone boots up obvi now i dont have root.
I put the bootloader.img onto my phone go into Magisk manager and modify the bootloader then bring it back to the computer.
Boot the phone into bootloader
fastboot flash boot magisk_patched.img
fastboot reboot
phone gets stuck in the G logo with the loading bar
any hints????

after doing some researched i tried it again but this time flashing the patched boot.img to both a and b slots. Still same result

krolla03 said:
So i was running Android 10 Nov update rooted WITHOUT TWRP
And i wanted to update to Dec update
So i DLed DEC update factory image took out the -w booted my phone into the bootloader flash-all
It does its thing phone boots up obvi now i dont have root.
I put the bootloader.img onto my phone go into Magisk manager and modify the bootloader then bring it back to the computer.
Boot the phone into bootloader
fastboot flash boot magisk_patched.img
fastboot reboot
phone gets stuck in the G logo with the loading bar
any hints????
Click to expand...
Click to collapse
krolla03 said:
after doing some researched i tried it again but this time flashing the patched boot.img to both a and b slots. Still same result
Click to expand...
Click to collapse
You stated that you patched the bootloader.img, is that correct?? You need to patch the boot.img, or, was that just a typo on your part?
Did you disable all your magisk modules before you fastbooted the factory image?? If not, then it's very likely that one, or maybe more modules, isn't compatible with the December update. I'll wait for your reply before trying to help solve the problem.

I previously dealt with similar symptoms. You can read about it here -- https://forum.xda-developers.com/showpost.php?p=81102855&postcount=33

Badger50 said:
You stated that you patched the bootloader.img, is that correct?? You need to patch the boot.img, or, was that just a typo on your part?
Did you disable all your magisk modules before you fastbooted the factory image?? If not, then it's very likely that one, or maybe more modules, isn't compatible with the December update. I'll wait for your reply before trying to help solve the problem.
Click to expand...
Click to collapse
OK so stupid me yes i was patching and flashing the bootloader.img not the boot.img.
I just tried flashing the indeed patched boot.img and now im getting the same issue as rustnails. Where it gets stuck at the G logo for a few secs and reboots.
I did not uninstall or disable any of the magisk modulus
how do i do that now that i dont have root?

krolla03 said:
OK so stupid me yes i was patching and flashing the bootloader.img not the boot.img.
I just tried flashing the indeed patched boot.img and now im getting the same issue as rustnails. Where it gets stuck at the G logo for a few secs and reboots.
I did not uninstall or disable any of the magisk modulus
how do i do that now that i dont have root?
Click to expand...
Click to collapse
Fastboot into twrp. Go to advanced, select file manager, go to /data/adb/modules then delete each one of them. Reboot, then go back and fastboot your patched boot.img to regain root :good:

Badger50 said:
Fastboot into twrp. Go to advanced, select file manager, go to /data/adb/modules then delete each one of them. Reboot, then go back and fastboot your patched boot.img to regain root :good:
Click to expand...
Click to collapse
Ok. Before i try that let me just ask this.
Can i just temp boot TWRP to do that
I dont want to install TWRP permanently because ive had mostly trouble with TWRP in the last few android versions.

krolla03 said:
Ok. Before i try that let me just ask this.
Can i just temp boot TWRP to do that
I dont want to install TWRP permanently because ive had mostly trouble with TWRP in the last few android versions.
Click to expand...
Click to collapse
Yep. It'll just be temporary :good:

Badger50 said:
Yep. It'll just be temporary :good:
Click to expand...
Click to collapse
Thanks man. I got it all working again!!!

Hi badger, @Badger50 (Mod Edit: added mention tag)
i have an issue with rooting my device
when I write fastboot flash boot magisk_patched.img I get a message says < waiting for device >
can you please help me to find a solution to my problem?

dark_heroo said:
Hi badger, @Badger50 (Mod Edit: added mention tag)
i have an issue with rooting my device
when I write fastboot flash boot magisk_patched.img I get a message says < waiting for device >
can you please help me to find a solution to my problem?
Click to expand...
Click to collapse
Not sure what your starting point is but:
After installing you fastboot factory image
you can either temporarily or permanently install TWRP (temp TWRP= fastboot twrp.img, install magisk, reboot OR perm TWRP = fastboot twrp.img, install TWRP.zip from witin TWRP)
then you just flash/install magisk in TWRP
In my sig is a link to a detailed step by step guide for all this.
Good luck!