(Avis aux intéressés, j'ai traduit mon message en français, et reparti une discussion sur Frandroid.)
Hello,
I managed to map the partitions on the Gio 5660M (Bell Canada, 2.3.4, MUGK3) in order to extract an ODIN flashable complete stock backup.
I have also made a stock, rooted ROM backup by working in a hex editor. Other tools that helped the mapping were Winmerge, to do file comparisons with an Euro 5660 ROM, and Notepad++ for string searches.
Those with a 5660M that are experiencing issues after flashing Euro 5660 ROMs that have been posted here now have the possibility of flashing back their original radio and kernel.
ROM development and deployment is going to be safer going forward.
I copied the blocks with the dd command as follows:
dd if=/dev/block/bml1 of=/sdcard/bml1 bs=4096
WARNING!!! DO NOT dd /dev/block/stl5 as there have been multiple reports of bricking following reading it. We already know that this block contains the EFS partition, including the SIM-lock code. You can however dd bml5 without issue from a "live" phone. If you absolutely want stl5, you may get it by using a rooted custom recovery.
From what I've gathered bml is essentially a lower level interface to the same blocks accessed by stl, but the results differ somewhat in resulting file size.
Here are the results:
Code:
/dev/block/bml1 MIBIB
/dev/block/bml2 QCSBL
/dev/block/bml3 OEMSBL
/dev/block/bml4 AMSS
/dev/block/bml6 Essentially empty, with a FSR_STL string at the beginning.
/dev/block/bml7 arm11boot
/dev/block/bml8 boot.img. My initial assumption was based on the .ops file supplied with the Euro ROM I've done my comparisons with. This has since been confirmed with actual flashing.
/dev/block/bml9 recovery.img for the same reasons as above.
/dev/block/bml10 Essentially empty. Mine has a BMC string at the beginning which matches the CSC code on this phone, followed by an ON and an OFF.
/dev/block/bml11 Empty. \xFF all around.
/dev/block/bml12 Seems to contain the same RFS data as stl12, but with an additional 8 megs of data/padding, not readable by MagicISO.
/dev/block/bml13 Like 12 above, but user data
/dev/block/bml14 As above, but the almost empty partition
/dev/block/stl1 cannot open for read
/dev/block/stl2 cannot open for read
/dev/block/stl3 cannot open for read
/dev/block/stl4 cannot open for read
/dev/block/stl6 Empty: contains only \xFF
/dev/block/stl7 cannot open for read
/dev/block/stl8 cannot open for read
/dev/block/stl9 cannot open for read
/dev/block/stl10 cannot open for read
/dev/block/stl11 cannot open for read
/dev/block/stl12 system.rfs - is flashable as-is once tarballed. Also contains the CSC files as we're taking this from a "live" installation, contrary to an OEM provided image. (My image is also rooted for the same reason.)
/dev/block/stl13 data.rfs - User data partition
/dev/block/stl14 cache.rfs - Odin hangs when I try to flash it. Use CWM and dd back into place from the SD card.
From what I see we can't repartition our phones like the GT-I9000 guys do, so there are no PIT files to worry about. Only the OPS files which ODIN uses. We're not able to flash with Heimdall in its current configuration as it requires a PIT file.
GT-S5660M_MUGKG3_stock_rooted_ROM_v2.7z (101.46 MB)
Un7-Zip, flash tarball with Odin using the "One Package" option. Tested working on my phone. I think it goes without saying that flashing this is at your own risk.
(PDA: S5660MUGKG3 PHONE: S5660MUGKG3 CSC: S5660MBMCKG3)
Tutorial on flashing with Odin, with link for the appropriate version for our phone.
I've released my custom 5660M ROM, ArpegGioMod.
Goodbye,
Darkshado
Wow,
Thank you very much. The screen brightness issues and problems connecting to the mobile 3G network were very troublesome.
I will be flashing this ROM back to my s5660m.
THANK YOU!
STATUS UPDATE:
I have successfully flashed the image to my phone, i had to rename factory.rfs to system.rfs in order for ODIN to flash successfully. Also, it may not be important but I noticed that your image is missing the csc.rfs file.
I copied it from another ROM but it still didn't take it.
Even with the CSC.RFS file missing, it SEEMS to work GREAT! No more screen issues or 3G problems so far, I will keep you updated!
Again, thank you for uploading this, Hopefully soon there will be a CM7 for the s5660m!
Cool! Please, pretty please let me know as soon as possible how it turns out. When do you plan on trying this? This afternoon or later tonight?
Depending on how much you feel at ease with experimenting, you might be able to make a modified OPS file and new tar archive to flash only AMSS and boot.img to your system. Boot in recovery to wipe cache and dalvik-cache, then reboot the phone in normal mode. *If* things go according to plan you'd be left with a custom ROM'ed and functional phone. Otherwise just flash the whole thing back to stock.
Good luck,
Darkshado
Coolty said:
STATUS UPDATE:
I have successfully flashed the image to my phone, i had to rename factory.rfs to system.rfs in order for ODIN to flash successfully. Also, it may not be important but I noticed that your image is missing the csc.rfs file.
I copied it from another ROM but it still didn't take it.
Even with the CSC.RFS file missing, it SEEMS to work GREAT! No more screen issues or 3G problems so far, I will keep you updated!
Again, thank you for uploading this, Hopefully soon there will be a CM7 for the s5660m!
Click to expand...
Click to collapse
Great! You just made my day!
About the missing CSC file: CSC is an acronym for Carrier/Country Specific Code. The csc.rfs file is a partition image file that, as far as I can tell, is merged with the contents of the system.rfs partition. In our case, the CSC file would contain the APN settings, as well as the Bell proprietary apps like self-serve and remote PVR.
Instead, since I took the system partition from a live phone, the CSC content is already in the system.rfs partition. I think the idea behind this is that Samsung can release new CSC packages without having to update the whole firmware when "new" carriers add the phone to their lineup.
I'll see if I can edit the RFS partitions, (maybe by mounting them on the phone directly?) if so, I would be able to unroot, and make that separate CSC partition as well. That would make the backup completely stock, as if it came right from Samsung.
Another, simpler solution would be to modify the OPS file to skip the CSC partition.
One question: did you re-tar each file individually for ODIN to take them?
CM7 port: I'd love to have one on that phone as well, but I'm not in a position to tackle that project, yet. The good news is that since we now have a way to bring the phone back to stock, we can experiment safely.
Goodbye,
Darkshado
Depending on how much you feel at ease with experimenting, you might be able to make a modified OPS file and new tar archive to flash only AMSS and boot.img to your system. Boot in recovery to wipe cache and dalvik-cache, then reboot the phone in normal mode. *If* things go according to plan you'd be left with a custom ROM'ed and functional phone. Otherwise just flash the whole thing back to stock.
Click to expand...
Click to collapse
I will try this as well, will let you know the status of that as soon as I get to that. I am pretty confident with flashing phones by now
One question: did you re-tar each file individually for ODIN to take them?
Click to expand...
Click to collapse
No, I use linux so it was an easy process of copying the factory.rfs to my HDD, renaming it to system.rfs, deleting factory.rfs from TAR, and then adding system.rfs to the TAR file.
Let me know if you want me to try anything else, as I have access to linux and am pretty knowledgeable when it comes to things of that nature.
I can confirm that replacing amss and boot.img for 5660m from custom firmware meant for the 5660 works perfectly. I am using this tar: GioPro-1_2-LITE-by_ZimniY-S5660XXKQ6_S5660XXKQ5_S5660SEBKQ1.tar AND the GioPro 1.3 update zip. No screen issues or 3G problems. If you like I can upload the edited ROM for ODIN.
Step by Step guide for Noobs?
Hello,
My Samsung Gio S5660M is on an infinite loop.
Will this method fix the issue?
Can someone kindly give a step-by-step guide to this method (starting from what software/driver needed)?
Thanks a lot.
red02 said:
Hello,
My Samsung Gio S5660M is on an infinite loop.
Will this method fix the issue?
Can someone kindly give a step-by-step guide to this method (starting from what software/driver needed)?
Thanks a lot.
Click to expand...
Click to collapse
Why is your phone stuck in an infinite loop? What did you do to cause this?
did you somehow overwrote stl5(the efs partition afaik) while trying to unlock your phone?
Coolty said:
I can confirm that replacing amss and boot.img for 5660m from custom firmware meant for the 5660 works perfectly. I am using this tar: GioPro-1_2-LITE-by_ZimniY-S5660XXKQ6_S5660XXKQ5_S5660SEBKQ1.tar AND the GioPro 1.3 update zip. No screen issues or 3G problems. If you like I can upload the edited ROM for ODIN.
Click to expand...
Click to collapse
if you could post it, that would be much appreciated!!
steez003 said:
if you could post it, that would be much appreciated!!
Click to expand...
Click to collapse
I am currently in the process of uploading the edited TAR file to megaupload. The file is rather large so it may take another hour or so to complete. I will update this post when it is completed.
EDIT:
Here you go! GioPro 1.2 LITE edited for use with the Samsung Galaxy s5660m
Gio Pro 1.2 LITE updated for canadian s5660m by coolty
Coolty said:
Why is your phone stuck in an infinite loop? What did you do to cause this?
did you somehow overwrote stl5(the efs partition afaik) while trying to unlock your phone?
Click to expand...
Click to collapse
Hello Coolty,
Yes, that's exactly what happened. I tried to unlock it using Andorid Terminal Emulator, and although it gave me the unlock code, it fell into infinite loop upon restart.
Will your uploaded file fix this problem?
What would possibly provide a detailed guide on how to use the file?
Thanks.
red02 said:
Hello Coolty,
Yes, that's exactly what happened. I tried to unlock it using Andorid Terminal Emulator, and although it gave me the unlock code, it fell into infinite loop upon restart.
Will your uploaded file fix this problem?
What would possibly provide a detailed guide on how to use the file?
Thanks.
Click to expand...
Click to collapse
Hi,
I'm not one for explaining things in great detail, but the basic breakdown of the things you need (google is your friend) are:
1) Odin_Multi_Downloader_v4.42
2) The USB drivers for your phone (Hint: Samsung Kies)
3) OPS File (for this phone, I recommend GIO_v1.0.OPS)
4) Either a single TAR file or multiple files (eg, appboot, PDA, etc) For the file I am uploading it will be a single TAR file which is a package that includes all the things needed.
Then, you just remove the battery in your phone, unplug it from USB or wall charger, put battery back in, hold vol down + HOME + power until you see a screen (you may have to press a vol key after that, read the screen to see if you need to) Your screen on the phone should say DOWNLOADING... This is when you:
1) connect phone to computer via USB after installing drivers (kies, usb driver)
2) make sure kies is closed
3) run ODIN
4) choose the proper OPS file
5) click single package
6) choose the TAR file you want to flash to your phone
That's it!
EDIT:
I am providing some forum links that may better explain how to do what you need done:
How to unbrick (for samsung ACE, but applies to the 5660m) http://forum.xda-developers.com/showthread.php?t=1071970
How to use ODIN to flash your phone: http://forum.xda-developers.com/showpost.php?p=16979859&postcount=549
And of course, the great bible of GIO 5660 links and information: http://forum.xda-developers.com/showthread.php?t=1209425
I have updated my previous post to include the download link to the fixed rom for use with the s5660m.
(search for "s5660m by coolty" on the forums to find it)
Coolty said:
I am currently in the process of uploading the edited TAR file to megaupload. The file is rather large so it may take another hour or so to complete. I will update this post when it is completed.
EDIT:
Here you go! GioPro 1.2 LITE edited for use with the Samsung Galaxy s5660m
Gio Pro 1.2 LITE updated for canadian s5660m by coolty
Click to expand...
Click to collapse
Thanks! I ended up flashing my phone and I have run into a problem. For some reason Wifi won't work in GioPro. It says 'Turning on...' and then it will say 'Error'. Any ideas?
Thanks
Will this help at at all with a blank IMEI? I assume this would only help for people flashing back to stock firmware or recovering from a non-bootable or reboot loop phone?
steez003 said:
Thanks! I ended up flashing my phone and I have run into a problem. For some reason Wifi won't work in GioPro. It says 'Turning on...' and then it will say 'Error'. Any ideas?
Thanks
Click to expand...
Click to collapse
I'm also running into the same issue
Sent from my Nexus S using XDA App
Thats why i recommend you guys always do a factory reset before and after flashing , these glitches , like gps issue , wifi , stuck on boot logo , won't happen if you properly fectory reset before and after flashing....
Waqasshazad: Maybe wiping the caches will help, but the issues might be due to running a 5660 on a 5660M as well. We know the kernels and modems aren't compatible, it may go a bit further. By the way, it's spelled factory.
MacrossFX: I've seen mentions of people dd'ing their stl5 partition into a file and then back on the phone, but I'm unsure this worked in the end. I'm afraid your only solution might involve a shipment to the service center...
ClockworkMod Recovery for the Samsung Galaxy Gio GT-S5660
http://forum.xda-developers.com/showpost.php?p=16980117&postcount=559
May be this can backup for you , too with s5660m , i have tested on Gt s5660 and it worked perfectly fine..
waqasshahzad1986 said:
Thats why i recommend you guys always do a factory reset before and after flashing , these glitches , like gps issue , wifi , stuck on boot logo , won't happen if you properly fectory reset before and after flashing....
Click to expand...
Click to collapse
I followed your instructional video and did do a factory reset before and after. Maybe i'll try reflashing it again tonight and see what happens.
Hi all,
I'm trying to replace the font on bubor's CM11 ROM by means of flashing one on of the ZIPs available at http://forum.xda-developers.com/goo...-fontster-betas-flashable-font-packs-t2513985
I am using bubor's TWRP v2.7.1.
The problem I first encountered when trying to flash a font was the error message "Error executing updater binary" and thus the flashing "Failed". Based on the advice at http://forum.xda-developers.com/showthread.php?t=2290009 , I figured it would probably be a good idea to replace the update-binary with the one found in my ROM's ZIP, so I did that.
However, the ZIP still doesn't flash. Although I no longer get the "Error executing updater binary" message, now TWRP simply tells me "Error flashing zip" without offering me any explanation.
Please can you help with this, and apologies for the noob question. I have tried installing the ZIP from both internal and external SD. My SD's are swapped - could that have something to do with it?
- downlaoded http://www.mediafire.com/download/40x5qm44a24p0dg/CantarellFontPack.zip
- downlaoded http://dualhoki.vim.hu/bubor/dev/keyboard-light.zip
- replace update-binary ( copy from keyboard-light.zip)
- install
no error.
Would you be more detailed what did you use with what, please.
bubor said:
- downlaoded /CantarellFontPack.zip
- downlaoded keyboard-light.zip
- replace update-binary ( copy from keyboard-light.zip)
- install
no error.
Would you be more detailed what did you use with what, please.
Click to expand...
Click to collapse
I'm sorry for not being detailed enough.
I tried following your steps but unfortunately the flashing still failed. I eventually got it to work after a combination of actions, but I think the most crucial one was changing the write permissions of the \system\fonts folder from "drwxr-xr-x" to "drwxrwxrwx".
Thanks for your efforts in any case, I really appreciate all the work you're doing.
Hello Guys,
i opened the thread in the Question&Answer Forum but somehow i have an different approach now that i learned how to rollback an firmware version with an locked bootloader. i dont know if it is possible, i more want to open like a discussion about it if this would be an thing someone could possibly do (and thats the reason im opening another thread for it, since it is not the same question anymore as in the other thread).
well, you can flash an image like EML-L29 8.1.0.129 to the device via the dload method. this image installs just fine, great. but now.. in my understanding the interesting part is this update.app. this update.app as far as my knowledge goes contains all this img files. you know, kernel system boot recovery etc.. wouldnt it be possible to simply replace the recovery.img with an twrp recovery.img, put the update.app back together, zip it in the necessary update_sdcard file and try to install it? i read about the tool "HuaweiUpdateExtractor", and this handy nice tool is showing the files.
another thought of me is: the installer is *verifying* the update.app somehow. but if it is verifying this file, there must be like a crc-file, some way of telling "this file is original" or "this file is okay". so maybe this is another part of the problem that i would have to take care of. but still i would need to know a lot more about the way the eRecovery works.
my ultimate goal is to solve the bootloader code problem since tackling it with dc-unlock and hcu wont work cause the security patch level seems already too high in the first versions of this phone. im basically search now ways around it - i know, there is actually no way to do it, but this is the reason why im opening this thread in hope to get some clues or ideas - and telling my own. oh and im pretty sorry if this is maybe annoying, i surely dont have any intention of spam the forums or stress too much on this topic (but it got me very interested).
Edit: i read in another board that it is nearly Impossible to switch the img files because they are encrypted. I guess it is not possible with this method so basically.. just ignore this thread. I guess there is really no way.
Also I think they have to do some checksum when flashing, so it's really impossible to just switch files...
About dload, i'm on 9.0.0.293 on EML-L29C432
I try the dload method to rollback to android 8.1, no success
i use an usb otg, created dload folder to root and place update.app extracted zip in dload folder
Also i created an "EML-L29_hw_eu" folder inside dload with again extracted from the hw zip file
When i use the dialer method, phone recognize the update.app file and reboot
after reboot to recovery, i have an error and i can't downgrade
What i did wrong ?
thanks
bender8125 said:
About dload, i'm on 9.0.0.293 on EML-L29C432
I try the dload method to rollback to android 8.1, no success
i use an usb otg, created dload folder to root and place update.app extracted zip in dload folder
Also i created an "EML-L29_hw_eu" folder inside dload with again extracted from the hw zip file
When i use the dialer method, phone recognize the update.app file and reboot
after reboot to recovery, i have an error and i can't downgrade
What i did wrong ?
thanks
Click to expand...
Click to collapse
well the biggest problem may be the image itself that you are trying to flash. if you take it from firmwarefinder, you will get most likely absolutely no success. you need to take one from androidhost.ru, the ones there worked for me. there you just put everything in the dload folder on your USB-Stick. oh and better use an full-OTA, not just an simple ota update, because that wont work (you cant just update a few files when you are already on EMUI 9). and on top of that: backup your phone first, because it is possible that after your downgrade you lose all data on your phone.
oh and another thing if you just want to get back to EMUI 8.1 (not a specific version you wish for), just use hisuite, because they are allowing the downgrade even more easily. the method i mentioned above is if you try to flash a specific version like i did with 8.1.0.120